Used Green-Tec Mulcher for sale (8,186)

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Nwjdjdzqptopfx Abxoi Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Nedpfx Ajdzqb Eobxewi Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Portal machining center for HSC milling The machine works in a Röders RCM automation system. It can therefore be integrated into an automated production system. Technical data - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Speed: 36,000 rpm - Fischer motor spindle - Spindle mount: HSK E50 - Feed rate: up to 60 m/min. Work table - Dimensions 900 mm x 700 mm - Max. workpiece weight 800 kg Control - Röders HSC RMS6, including software for: milling simulation and for cutting out machining - Electronic hand control panel and mouse - Ethernet interface integrated in Windows NT - Remote maintenance of the RSM 6 machine control Nwsdpfx Abevri Nmjxsi Machine structure - Portal version with temperature stabilization of the machine frame Tool changer - 30 stations with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: tool length correction, diameter measurement and tool breakage monitoring - Microjet spray cooling and lubricator - Fixed bearings and spindle nuts water-cooled - Fully protected cabin (crane loading possible) - Connection for the work area extraction - 2 pcs. Screw chip conveyor - Workpiece cleaning via separate air nozzles Machine data - Space requirement (without service areas!) LxWxH approx. 3,100 mm x 3,000 mm x 3,200 mm - Weight approx. 13,000 kg - Connected load 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work was carried out regularly. A viewing with power and chips is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 50,000 rpm, overall weight: 3,800 kg, workpiece weight (max.): 200 kg, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 2,000 mm, Equipment: documentation/manual, Röders RXP300 -overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: X-axis: 320 mm Y-axis: 300 mm Z-axis: 200 mm (height) The clearance height is 390 mm above the machine table without chuck. Machine table: Size: 370 mm x 350 mm Workpiece mass: Maximum 200 kg Nwedpfx Aovvigmjbxsi Axis drives: Highly dynamic linear motors in all axes with integrated cooling. Feed rates: 0 - 40,000 mm/min in all axes. Spindle: HSK25E 50,000 rpm Tool changer: 42-way Automatic 3D probe Control: Röders RMS6 in current version (2024) A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- Nwsdpevvlmcjfx Abxsi The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, Used HSC machine RXP400DS/ RXD5 -overhauled- The machine is completely overhauled, tested and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 200 mm Nsdpfx Ajlzhhcebxswi - Y-axis: 294 mm - Z-axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min in all linear axes. - Network connection: - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction -RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - Tool changer 12-way row, optional tool changer conversion to chain - High-precision option - Remote maintenance via Teamviewer - Transport dimensions of machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: Approx. 3,000 kg A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Year of construction: 2012, condition: excellent (used), machine/vehicle number: M 5046 Typ 101 000 432, Embossing calender for roll-to-roll processing (100 m/min) Nwedpfx Abehr Rlyexji Sheet material can also be processed; separate feeding tables are included. Exchangeable cylinder (fine linen embossing pattern) The machine is in very good condition and has few operating hours. Machine manual / operating instructions.

Condition: new, Year of construction: 2024, Manufacturer: Green Transfo Type: Minera MP Nedjvx Tmispfx Abxewi Year of construction: 2024, unused Available units: 9 units Rated power: 7000 kVA Rated voltage: 30 / 0.72 kV The transformers are being sold due to an incorrect order. It was subsequently discovered that 33 kV transformers were required – the offered models only provide 30 kV each. Therefore, they are now for sale. Condition: Unused, fully functional, technically perfect

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation! Nwsdjqabm Eepfx Abxoi

Condition: ready for operation (used), Year of construction: 1995, Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive documentation, on-site inspection is possible. Njdern Rc Dspfx Abxswi

Year of construction: 2023, condition: ready for operation (used), Production capacity: 2x120kg, inlet connection (liquid phase): 22mm/RWS22, outlet connection (gas phase): DN50 PN25, optional (unregulated gas phase): RWS28, vent line (safety release): RWS22, separator drain: RWS12, connected load: 40kW, output: 3000kWh. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/400mm. Documentation available. On-site inspection is possible. The machine is unused and still in its original packaging. Nwodpfjuwrwuex Abxei

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 23146001, The machine was acquired in 2024 and has seen very little use. The original price was €132,000 net. The technical data is sourced from the manufacturer's website. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Capacity up to: 150 m³/h Chipping disc: 1,450 mm (diameter) x 78 mm Disc speed: 700 rpm Number of cutting blades: 4 Number of counter blades: 4 Maximum chip length: 36 mm Feed speed: 0.7 m/s MACHINE DETAILS Control system: Greentec Control System 3.0 with touchscreen Nwedpoyg D Svefx Abxji Three-point hitch: Standard Starting aid: Hydraulic Drive: PTO shaft 1000/1000E Required power: 200 – 450 HP Weight: 3,100 kg Speed: 1000 rpm Note: This machine is a special version without a hopper.

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Model Woody 500-100-1.0 SP Produced in 2019. Nedpfevrd Uqjx Abxjwi Like new.

Condition: ready for operation (used), functionality: fully functional, empty load weight: 5,300 kg, maximum load weight: 32,700 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2010, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 385.65 r 22.5, color: blue, trailer brake: trailer braked, Year of construction: 2010, Equipment: ABS, Used extendable DTEC container semi-trailers with 3 SAF disc-braked axles, 1st and 3rd axle liftable, EBS, air suspension, rear and central extension for transporting containers: 1 x 20’ flush, 2 x 20’, 1 x 30’, 1 x 40’, 1 x 45’, swap bodies from 6.015m to 13.60m, tank containers, Hi Cube, year 2010, full ADR equipment, 2 identical units available while stocks last. Authorized dealer: INTERDRIVE SRL-Parma. Nwedpfxexv A Ero Abxoi

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Nwjdjwhc U Tepfx Abxei

Condition: good (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 11353-24, travel distance X-axis: 500 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 240 mm, table width: 550 mm, table length: 450 mm, overall weight: 5,500 kg, spindle speed (max.): 42,000 rpm, Roders TEC RXP 500 – Precision 3-Axis CNC Milling Center Year of manufacture: 2005 We offer a used 3-axis CNC machining center Roders TEC RXP 500, renowned for its exceptional precision, high dynamics, and surface quality. Ideal for tool and mold making, micromachining, aluminum, and plastics processing applications. Nwedpfx Ajwww S Sebxji

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Ceramic angle standard from Wilbanks (CoorsTec) 600x460x80mm Nsdpfxsq Tdlzj Abxjwi Perpendicularity < 4µm Little used, very good condition Measurement protocol on request (surcharge)

Condition: used, W x L 60 cm x 250 cm Nsdpfeu Arh Rjx Abxjwi

Condition: used, functionality: fully functional, WLD-TEC Gasprofi 1 Gas Burner with bottle and pedal. Nsdpjubc Hfjfx Abxswi 2 for sale. 1 piece/200 EUR. Good working condition. Please check out our other listings as well.

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Nwedpjzpb Eqefx Abxoi

Condition: used, Year of construction: 1988, operating hours: 10,600 h, power: 66 kW (89.73 HP), next inspection (TÜV): 06/2027, Equipment: all wheel drive, cabin, front linkage, Mercedes Benz MB-Trac 900 turbo, vintage vehicle with front loader and 3-meter flail mower Tractor * Tractor * Towing vehicle * Vintage vehicle * COLLECTOR'S ITEM * Digital speedometer * Year of manufacture: 1988 * Date of first registration: 13.10.1988 * Next inspection: 03.2027 * Model series: WDB 440.173 * Gross vehicle weight: 6500 kg * Unladen weight: 3980 kg * Overall dimensions: 4150 mm x 2140 mm x 2810 mm * 40 km/h * Engine: OM 364 A * Diesel * 66 kW / 2400 rpm * 3944 cm³ displacement * Cabin Nsdpjxtdigjfx Abxowi * Radio * New tires 16.9-24 * Errors/input errors and prior sale reserved. Location and viewing of our vehicles: * STX HORSETRUCKS GERMANY, Hamburgerstrasse 65, 23816 Leezen * Service for all brands in the field of horse transporters and trailers, motorhomes * Please arrange an appointment in advance with Richard Theurer / Andreas Theurer.

Condition: new, Year of construction: 2023, working width: 105,000 mm, Seppi M. H3 105 flail mower / DEMO unit / Year of manufacture: 2023 / incl. MS03 adapter plate / in stock & immediately available Price: €10,790.00 net / €12,840.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mowing head for attachment to a hydraulic arm - mulches grass and bushes up to 3 cm in diameter - for excavators from 2 to 5 tons - for mounting on various adapter plates - floating mounting (parallelogram linkage) - indirect V-belt drive with 3 V-belts - Drive designed for hydraulic motor depending on the flow rate of the carrier machine - Housing made of wear-resistant AR400 steel - Front protection with chains - Rear protection made of rubber - Reinforced support roller with double tapered roller bearing, height adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flail (standard) - 9 pieces, part number 150.02.041 Nedpfxjznrp Do Abxswi OPT 429 Hydraulic gear motor 17cm³ - with flow control valve and motor safety valve DRAIN SAFE TM protects the motor in case of incorrect use - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO leak oil line needed!) - including hoses and check valve OPT 372 hydr. 190° swivel device 2 hydraulic lines are required: supply and return. No leak oil! Additionally, a hydraulic circuit is required for the swivel ring. The unit is supplied without hoses and connections. Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse that are immediately available! Please contact us for this at . On request, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further information.

Condition: used, mileage: 643,089 km, power: 360 kW (489.46 HP), first registration: 10/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Structure: - Palfinger roll-off tipper, extendable * Model PST 18 TEC * Radio remote control * Additional work lights Equipment: * M-Cab * Leaf-air suspension * Leading axle liftable and steerable * 40mm towing hitch with continuous braking system * Air conditioning * Auxiliary heater * Heated driver's comfort seat * Sun visor * Rear window * Roof hatch Technology: * Electrically adjustable and heated exterior mirrors * Central locking with remote control * Navigation system * USB Nedpfx Ajy E A Rvebxowi Safety/Environment: * Brake system with ABS and ASR * Lane departure warning assistant * Rear axle differential lock * Emission standard Euro 6 Miscellaneous: * German first delivery * 1 previous owner * Payload 13,700 kg according to ZLB (without container) * Permissible total weight 26.00 t * Permissible combined weight 44,000 kg Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles in stock, ranging from vans and commercial vehicles to construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we are happy to prepare an individual offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV inspection is required, we will be pleased to provide a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle by our external partners is possible for an additional fee. The information provided in advertisements, on the internet, price tags, and pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical or data transmission errors. Listed equipment must be verified separately if necessary. Subject to error and prior sale.

Condition: as good as new (ex-display), Year of construction: 2022, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, UK Delivery Only Global S Green 07.07.05 Shop Floor - additional bellows on the X & axis HH-AS8-T5 Automatic Indexing Probe Head (5° increments) HP-THDe High Definition Touch Trigger Probe Year of Manufacture: 2022 ISO 10360-2:2009: MPE(E0/E150)1) [18-22°C] 1.5+ L/333 MPE(E0/E150)1) [15-30°C] 1.5+ L/263 Nwedpfx Abozimrvsxji

Condition: used, Schneidanlage mit Links Palettenheber Baumann NUP 650, rechts Rüttler Baumann BSB 3L mit Ausstreichwalze und rechts davon Palettenheber Baumann NUP 650 Cutting Line with left side Stack Lift Baumann NUP 650, right side Jogger Baumann BSB 3L with Press rollers and Right side Stack Lift Baumann NUP 650 Nedpfx Aszlldpjbxswi Schneidmaschine / Cutting Machine Wohlenberg 115 CUT-Tec Baujahr / Year 2005 Schnittbreite / Cutting Width max. 1150mm Links Palettenheber / left side Stack Lift Baumann NUP 650 Rechts Rüttler / right side Jogger Baumann BSB 3L mit Ausstreichwalze Rechts Palettenheber / Right side Stack Lift Baumann NUP 650 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test