Used Guideline for sale (191)

Condition: new, mileage: 500 km, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 540 8x2 with EFFER Crane Truck: • FH 8x2R NLA air suspension • Application cycle: Long-distance transport • Predominantly flat topography • Gross combination weight, technical: 60 t (observe towing capacity of drawbar coupling!) • Rear-view mirrors for body width 2600 mm Main Components • Chassis height: MED (medium) • Trailing axle, electro-hydraulically steered, single tyres • Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle • Globetrotter safety cab FH • Wheelbase: 4,900 mm • Emissions according to Euro 6, with SCR, particulate filter, and exhaust gas recirculation • Diesel engine 12.8 l, 551 hp/405 kW, 2,652 Nm • Volvo Engine Brake+ (VEB+) (meets ADR braking regulations) • I-Shift AT2612, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm • Liftable axle • Rear axle RSS1370C, axle load 13 t, GCW 70 t, differential lock • Drive axle ratio 3.08:1 Chassis • Air suspension on front axle(s) • Lifting on front axle air suspension: Basic (more ground clearance, reduced lift range) • Front axle load max. 20 t (technical) for double front axle • Rear axle load max. 23 t (technical) • First trailing axle 10.0 t • Volvo Dynamic Steering (VDS) including Stability Assist • Disc brakes, solid discs Njdpfxozthh Ho Agrowl • EBS, Electronic Braking System, Medium package • AGM batteries, 2 x 210 Ah • 275 l fuel tank, left (plastic) • AdBlue tank, usable capacity 57 l (between the front axles) Trailer / Coupling • Rockinger 400 G-150 drawbar coupling (observe D-value/max. trailer load!) • Electrical connection for semi-trailer/trailer, 15-pin (ADR possible) • Duomatic coupling Wheels and Tyres • Dura-Bright EVO aluminium rims (polished) • FA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • DA Tyres 315/80R22.5 (Continental Conti Eco HD5, 3PMSF) • NLA Tyres 385/65R22.5 (Continental Conti Eco HS5, 3PMSF) • Tyre pressure monitoring with internal sensors Crane • Effer E-9 Jib.155Q-6 JDC • JIB • Winch Body • All necessary chassis work for crane installation, including vehicle frame modification. • Compliance with body builder guidelines of the relevant chassis manufacturer for all work. • Complete installation of a specially developed auxiliary frame from high-tensile steel. • Welded and bolted auxiliary frame for high torsional rigidity and optimum stability (unique feature). • Supply/installation of front support legs • Assembly/bolting of the crane and main support, including installation of all hydraulic and electrical connections. • Usable as a tractor unit via removable/sliding Jost fifth wheel (JOST JSK SL), superstructure removable. • Removable flatbed body as high-profile welded steel construction (approx. 4,250 mm x 2,480 mm, A-dimension open). • Flatbed equipment: Container locks, Multisafe/Multifix stanchion pockets and retractable lashing eyes (2,500 daN / 6,500 daN). • Removable aluminium drop sides and rear underrun protection (extendable) incl. additional/front support. Further information on request.

Condition: new, functionality: fully functional, color: orange, operation weight: 2,300 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, Year of construction: 2026, Equipment: additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, HITACHI 23U-6 MTC with an operating weight of approximately 2,360 kg and a FULLY HYDRAULIC 360° OILQUICK OQR30 quick-change system - Base unit 23U-6 MTC - Cab and blade - 230 mm rubber tracks - 970 mm boom - Monoblock boom, laterally adjustable - Leak oil line - Automatic release for hammer/grapple - Hammer/shears and grapple hydraulics > all operated via the joysticks - IFM monitor for switching the auxiliary circuit Attachments: Rotator OILQUICK OQR30-R02 Nwjdpfx Ajzg E H Hegrol Demolition and sorting grapple, 300 mm cutting width Rigid trenching bucket, 1,200 mm cutting width Grading bucket, 800 mm cutting width Clamshell – deep excavation grapple, 400 mm cutting width Manufacturer's warranty: 60 months or 3,000 operating hours, whichever comes first, in accordance with the manufacturer's guidelines. All wear parts are excluded. Inspection possible at any time. Financing and leasing available upon request.

Condition: new, mileage: 50 km, power: 115 kW (156.36 HP), color: white, gearing type: automatic, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: Engine: 2.3 l D Euro 6d Final, 115 kW (156 hp), Transmission: HI-MATIC 8-speed automatic gearbox, Rear suspension: leaf spring, Wheelbase: 4100 mm, Rear doors with entry assist on passenger side, 2 LED cargo area lights, Seats not heated, Fabric seat covers, 4G connectivity box incl. TCO service contract, Front headlights: halogen, Daytime running light system, Light and rain sensor, Trailer pre-installation 12V 13-pin, Mirrors suitable for 2200 mm body width, Tire pressure monitoring system (TPMS), Side vehicle designation, Proactive lane-keeping assist (ELK), Emergency braking assistant AEBS with City Brake, Daily MY 2024, Electrically adjustable and heated exterior mirrors, Vehicle width 2000 mm, Over-cab storage compartment, Driver drowsiness alert system (DriverDrowsinessAttentionWarning), Central locking with remote control, Speed limiter: 160 km/h, Rear wall insulation, Traffic sign recognition with intelligent speed assistant (ISA), Electric windows for front entry doors, Front airbags for driver and passenger with seatbelt pretensioners, Plastic steering wheel, 20-litre AdBlue tank under cab, Steel wheels, Tire repair kit without spare wheel, 63-litre fuel tank, Rear axle ratio i 3.615, High plastic sidewall and door trim, Wooden floor + wheel arch trim, Rear door opening angle 260°, External loading lights above rear doors, Comfort driver's seat with armrest and lumbar support, adjustable in height, tilt and longitudinally, hydraulically suspended, additional speed limiter, Front obstacle detection (MOIS), Rear-view camera with dynamic guidelines (without parking sensors), Splash guards front and rear axles, Adaptive driving dynamic control with crosswind assistant, Tires: 235/65 R16, Parabolic rear springs reinforced, Stage 2, White IC 194, USB socket on driver side, Digital radio DAB with 7-inch touchscreen, Fog lights, Manual air conditioning, Cruise control, Comfort driver's seat with armrest and lumbar support, adjustable in height, tilt and longitudinally, hydraulically suspended, and much more. Mr. Rudolph is happy to assist you by phone at: Should you wish to lease or finance the vehicle, we are pleased to provide you with a tailored offer. We are also happy to accept your used commercial vehicle as a trade-in. Errors and prior sale excepted! For further information, please visit our homepage: ... - ESP, Particle filter, Partition wall = Further information = Engine capacity: 2,287 cc Nwjdeytaflopfx Agrol Gross vehicle weight: 3,500 kg Please contact Tobias Ebert for more information.

Condition: new, mileage: 50 km, power: 115 kW (156.36 HP), color: white, gearing type: automatic, Equipment: ABS, air conditioning, central locking, power assisted steering, Mr. Rudolph will be happy to assist you by phone at: Engine: 2.3 l D EU6d final, 115 kW (156 hp), HI-MATIC 8-speed automatic transmission, rear axle with leaf spring suspension, wheelbase 4100 mm, rear doors with entry assist on passenger side, 2 LED cargo area lights, non-heated cloth seats, 4G Connectivity Box incl. TCO service contract, halogen front headlights, daytime running lights, light and rain sensor, tow bar preparation 12V 13-pin, exterior mirrors for 2200 mm body width, TPMS (tire pressure monitoring system), side vehicle designation, proactive steering assistant with lane keeping (ELK), emergency braking assistant AEBS with city brake, Daily MY 2024, electrically adjustable and heated exterior mirrors, vehicle width 2000 mm, overhead storage above driver’s cabin, driver drowsiness attention warning, central locking with remote, speed limiter 160 km/h, rear wall insulation, traffic sign recognition with intelligent speed assistant (ISA), electric windows for front entry doors, front airbags for driver and passenger with seatbelt pretensioners, plastic steering wheel, 20 l AdBlue tank under driver’s cab, steel rims with tire repair kit (no spare wheel), 63 l fuel tank, rear axle ratio i 3.615, high plastic side wall and door trim, wooden floor and wheel arch covers, 260° rear door opening angle, exterior loading lights above rear doors, comfort driver’s seat with armrest and lumbar support (height, tilt, and longitudinal adjustment, hydraulically suspended), additional speed limiter, moving off information system (MOIS), reversing camera with dynamic guidelines (without parking sensors), splash guards front and rear axle, adaptive dynamic driving control with crosswind assist, 235/65 R16 tires, reinforced parabolic rear springs stage 2, white IC 194, driver’s side USB socket, DAB digital radio with 7 inch touchscreen, fog lights, manual air conditioning, cruise control, comfort driver’s seat with armrest and lumbar support (height, tilt, and longitudinal adjustment, hydraulically suspended), and much more. Mr. Rudolph will be happy to assist you by phone at: Should you wish to lease or finance the vehicle, we would be glad to provide you with a personalized offer. We are also happy to consider your used commercial vehicle as a trade-in. Subject to errors and prior sale! Further information can be found on our homepage: ... - ESP, particulate filter, partition = Further information = Engine displacement: 2,287 cc Gross vehicle weight: 3,500 kg Please contact Tobias Ebert for further details. Nsdoyrw Sajpfx Agrjwl

Condition: new, Year of construction: 2025, pressing force: 20 t, Forging Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Press – Table 500 × 600 mm For sale is a compact single-column forging press (C-frame) from the manufacturer Durendus, model DCS-20, with an adjustable pressing force of 5 to 20 t. This machine features a table size of 500 × 600 mm, a maximum installation height of 700 mm, high traverse speeds, and is ideally suited for small-scale forging, forming, and assembly work. ===== Technical Data & Information: Forging Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,450 × 1,500 × 2,400 mm ==== Working Area - Max. installation height: 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm Nodpfxeyght Rj Agrowl - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or as per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 90 mm - Piston rod diameter: Ø 60 mm - Rapid traverse cylinder: Ø 40 mm - Rapid traverse piston rod: Ø 25 mm - Operating pressure: max. 250 bar (adjustable) ==== Speeds - Return speed: 140 mm/s - Idle speed: 140 mm/s - Pressing speed: 4 – 10 mm/s (adjustable) - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 22 l/min - Motor power: 7.5 kW - Oil tank capacity: 150 l - Hydraulic block / valves: Hydropack - Filter: Filtrec - Oil level monitoring: electronic oil level switch - Hydraulic power unit: mounted at the upper rear ==== Electrical - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 10 kW ===== Forging, forming technology, assembly work, small batch production, workshop applications, metalworking Forging press, single-column press, C-frame press, hydraulic press, forming press, workshop press, small press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German machinery directives, as well as European machine guidelines (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements as they fully comply with the Brazilian national safety directive NR 12, which is based on these standards. Our key strengths are special machine construction and press automation. We supply custom-made hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses are predominantly equipped with components from leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2024, The Dibipack 3246 EV shrink wrapping machine opens the range of Dibipack Evolution “one-step®” systems, as easy to use as the standard Dibipack models. But thanks to the full electronics, great flexibility in use and high performance in controls and some innovative patented devices are offered. An ideal solution for small and medium-sized production volumes, as it is competitive and inexpensive. INFORMATION Working cycle electronically controlled by a microprocessor. It is possible to save 8 different work programs Automatic Sealing Time Adjustment: The machine will automatically adjust the sealing time according to the packaging speed. Ability to shrink when sealing is complete Retaining magnet included and adjustable: the hood remains closed until the end of shrinking. The hood can be opened after the fan has stopped to prevent hot air from escaping at the end of the cycle Reopening by gas pressure spring Begin control with proximity Nodpjmt Dtvofx Agrowl Energy Saving Function: The device enters standby mode when it is not working for a certain period of time Piece counter included Stand and scrap return on request The machine works with heat seal and shrink films such as PVC (BLUE FILM) or polyolefin films (GREEN FILM – GOLD FILM) Machine manufactured according to CE guidelines. TECHNICAL DATA – DIBIPACK 3246 EVX Power supply: 240V - 1ph Maximum power required: 2.1 KW Overall dimensions of the machine L x W: 1085 x 650 x 550 mm Worktop height (on stand): 920 mm Machine weight: 71 kg Sealing area W x L: 320 x 460 mm Maximum product height: 250 mm on request Impulse sealing system: bottom knife Maximum roll dimensions DIA x B: 250 x 470 mm Output: 4 - 6 pieces / min Programs: 8 Power consumption: KW / h 1.4

Condition: new, Year of construction: 2026, pressing force: 15 t, C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 tons. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm, and a stroke of 250 mm, making it suitable for insertion work, assembly processes, and small-batch production in industrial applications. ##### Technical Data + Information: ==== General Information - Design: C-frame / Single-column press - Manufacturer: DURENDUS - Pressing force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Installation height max.: 350 mm - Working height: 800 mm - Overall height: approx. 2,000 mm - Overall width with control cabinet: approx. 900 mm - Overall depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guidance: 2-way ==== Hydraulic Cylinder - Stroke: 0–250 mm - Working pressure: 250 bar - Starting speed: 17 mm/s - Return speed: 25 mm/s ==== Hydraulics & Drive - Hydraulic unit: DUPLOMATIC - Hydraulic pump: ASC - Flow rate: 7.5 l/min - Tank volume: 50 l - Cooling: Air cooler - Oil level monitoring: electronic - Hydraulic unit: mounted on top of the machine ==== Control - PLC: SIEMENS S7-1200 - Touchscreen: SIEMENS 7" - Pressure setting via touchscreen - Stroke setting via touchscreen - Temperature monitoring of hydraulic oil - Error display on display - Remote service / remote maintenance possible - Operation: Two-hand operation ==== Safety - Light curtain - Two-hand operation - Temperature monitoring - Automatic shutdown in case of overheating - CE-compliant design ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 2.2 kW - Lighting: LED - Protection class control cabinet: IP 54 ##### Application areas: Insertion, assembly work, small-batch production, jig and fixture construction, toolmaking, metalworking, fine assembly, testing, workshop applications Nwsdey Twg Iepfx Agrsl (Hydraulic press, C-press, C-frame press, Single-column press, 15 T press, 15-ton press, assembly press, insertion press, small-batch press, workshop press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed the Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly attractive prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: new, Year of construction: 2026, pressing force: 20 t, DURENDUS 20 T Workshop Press – C-Frame Press – 600 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered to a customer as a custom order. We can supply this machine from stock or manufacture it as new – including custom options per your requirements. This is a hydraulic workshop press suitable for pressing, straightening, and assembly tasks in both workshop and industrial environments. Base Price: €3,120 net Options (on request): The listed options are based on implemented customer projects and allow targeted adaptation of the machine to the specific application. The base machine is already a functional standard version – in practice, it is commonly extended with additional features and configured to project-specific requirements. * Table plate with X-form T-slot (from 60 t) * Pressure adjustment * Lateral movement of the ram (from 60 t) * Bending tool (from 60 t) * Anti-rotation cylinder with manual stroke setting * V-profile straightening support in combination with table plate * LED lighting * Foot switch * Cooling ===== Technical Data & Information: ==== General Information * Design: Workshop press * Press force: 20 t (optionally adjustable) * Total weight: approx. 350 kg * Overall dimensions (W × D × H): 1,100 × 700 × 2,350 mm ==== Working Area * Clear width: 600 mm Nwedjy E Nnnspfx Agrjl * Open depth: 200 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 600 / 470 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 90 mm * Piston rod: Ø 50 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 7.8 mm/s * Return speed: 11.3 mm/s ==== Hydraulics & Drive * Pump capacity: 3 l/min * Motor output: 0.75 kW * Hydraulic tank: 12 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Manual lever operation * Fine adjustment via hand lever * Power connection: 400 V / 50 Hz * Total connected load: approx. 1 kW ==== Equipment * Height-adjustable crossbeam with bolt locking * Chain mechanism for table adjustment * Manometer for pressure display * Emergency stop button * CE certification * Double-layer coating according to RAL ===== Pressing, extraction, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, C-type press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety standards, as they fully comply with the Brazilian national safety guideline NR 12 – which builds upon both. Our key strength lies in special purpose machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. Our presses are predominantly equipped with hydraulic components from leading European manufacturers.

Condition: good (used), Approx. 4-500 units, Isoco, Euro container / small load carrier RL-KLT 4147 - used: Price per unit, ex works: €2.50 (net)! Manufacturer: Isoco Type: RL-KLT 4147 Year of manufacture: unknown Dimensions (L x W x H): 400 x 300 x 147 mm Weight approx. 1.08 kg With drain holes Blue Nwodpfszv Ipvex Agrol Manufactured according to VDA guideline 4500 Smooth container base with water drain holes Ideal for automated logistics processes Lid slots for matching top lids Integrated label areas for barcode labeling Temperature resistant from -20 °C to +100 °C New price approx. €5.10 Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Workshop Press – C-Frame Press – 700 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered as a customer-specific order. We can supply you with this model from stock or manufacture it anew – with consideration for customized options if required. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in both workshop and industrial environments. Base price: €3,550 net Options (available on request): The listed options are derived from completed customer projects and enable precise adaptation of the machine to the specific application. The basic model provides a fully functional standard specification; in practice, it is most often enhanced through additional equipment and configured according to project requirements. Cross-grooved T-slot table (from 60 t) Pressure adjustment Lateral movement of the ram (from 60 t) Bending tool (from 60 t) Anti-rotation cylinder with manual travel adjustment V-profile straightening block in combination with table plate LED lighting Foot switch Cooling system ===== Technical Specifications + Information: ==== General Data Design: Workshop press Pressing force: 30 t (optionally adjustable) Total weight: approx. 500 kg Nwsdpfxsy Hixcs Agrjl Overall dimensions (W × D × H): 1,150 × 700 × 2,350 mm ==== Working Area Clear width: 700 mm Clear throat depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 700 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 115 mm Piston rod: Ø 65 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 10.4 mm/s Return speed: 15.3 mm/s ==== Hydraulics & Drive Pump capacity: 6.5 l/min Motor power: 1.5 kW Hydraulic tank: 14 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 2 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Manometer (pressure gauge) Emergency stop switch CE certification Dual-layer coating to RAL standard ===== Pressing, ejection, assembly, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured according to German machinery directives and European Machinery Directive 2006/42/EC, as well as all EC norms and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these standards. Our core strength is custom machine building and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. Our presses are equipped primarily with components from leading European manufacturers.

Condition: like new (used), Binder KBW 720 (2024) – Phytotron Chamber, Perfect Condition, Showroom Machine Model: Binder KBW 720 Year of manufacture: 2024 Condition: Like new – used exclusively as a demonstration unit after manufacturer testing Capacity: 720 liters Type: plant growth/climate/stability simulation chamber (phytotron) Power supply: 230 V Warranty: Yes (start-up) VAT Invoice: Yes Availability: Immediate Location: Grabina 92-701, Poland ——— Description: For sale: Binder KBW 720 climate chamber – a premium-class device for stability testing, plant growth simulation, and pharmaceutical & climatic research. The KBW 720 model combines a large working chamber (720 liters) with precise temperature and lighting control, making it an ideal choice for research institutes, laboratories, the pharmaceutical industry, and the agri-food sector. The unit was used solely as a demonstration exhibit – factory condition, ready for operation. ——— Njdpfx Aew Nvbzegrewl Technical data: • Temperature range: from +5°C to +70°C • Chamber capacity: 720 liters • Fluorescent lighting up to 15,000 Lux (programmable) • e™ – uniform temperature and light distribution • Stainless steel interior – easy to clean and disinfect • Programmable controller with LCD screen • Integrated data logger, USB port • Quiet operation, energy-saving technology ——— Applications: • Climatic testing under controlled lighting conditions • Phytotron-based research on plants and seeds • Stability tests in accordance with ICH guidelines • Use in pharmaceuticals, biotechnology, veterinary medicine ——— Why choose this unit? • Condition like new – no signs of use • Available immediately – no factory lead time • Perfect alternative to new equipment – at a lower price • Option for online demonstration or on-site visit • Technical support and optional extended service (delivery possible)

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis Manufactured using a self-supporting aluminum structure with corresponding reinforcements in the lower belt for exceptionally high stability and strength. Subframe made of aluminum, 140 mm frame height (max. 39 tons), axles and suspension: disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering mechanism, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st and 3rd axles can be lifted separately with starting assist (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension. Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, mounted on Alcoa aluminum rims, satin finish, 11.75x22.5 ET 120 (with steel rims + approx. 120 kg). Kingpin Aluminum landing gears, manufacturer: Alu-Leg, 2 x 10 ton support load, swivel feet for air suspension. Braking System According to E.E.G. standards, two-line braking system, EBS E system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator. Electrical System According to STVZO guidelines, with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear panel, 24-volt system with 1 x 15-pin and 2 x 7-pin socket, with side marker lights in LED design, 2 work spotlights at the rear, 2 LED work spotlights on the side at the height of the kingpins, 1 LED work spotlight inside at the front left, operated from the outside. Body/Tipping Body - Body fully welded inside Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt, plank profiles fully welded inside! Floor as a sliding floor system mounted on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in a straight design, special aluminum corner profiles in a tapered design, smooth rear wall in a straight design with 2 aluminum wing doors, 50/30 mm thick, with 4 swivel locking rods, mounted in the welded aluminum rear frame in Teflon and stainless steel bearings, running aluminum wall suspended in the reinforced aluminum upper belt with "Kevlar lining" for complete discharge, lateral brush seal and additional Kevlar lining on the side, integrated discharge chute with folding cover plate in the floor end, operable from the outside left rear, viewing window at the rear left, 1 sample slide in each rear door, i.e. 2 pieces, service door on the left in the front wall. Hydraulic System "Cargo Floor" 24 plank system - smooth design! Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD gliders, approx. 8 mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed brackets on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed brackets, line size NW 21, fixed brackets with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operation in a lockable, waterproof box, or without hydraulic hoses. Nsdpfjy U Syrex Agrewl Accessories PVC mud flaps w

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Nwodpfx Ageyh S Aijrsl Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: as good as new (ex-display), Year of construction: 2026, The outstanding advantages: Space-saving, compact design – comfortable and powerful. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air deflectors – also suitable for larger workpieces. Separation rate of paint mist up to 99%, pre-filter retention capacity up to 18 kg/m² – resulting in a long filter life! Easy and quick filter change on the front. Cost-effective replacement filters. Low purchase costs and extremely low energy consumption. Dry spray wall made of galvanized steel sheet with welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a secondary filter. Ex-fan incl. throttle valve mounted on the left. Don't compromise on surface quality. Easy Paint extraction walls are the ideal, cost-effective solution for effectively capturing and filtering paint mist and extracting solvent vapors. Robust and powerful, yet economical in consumption. Nwsdpfx Agscnz Iqorsl The IPE dual filtration system ensures that two filter stages provide a maximum separation rate of up to 99%. The cardboard labyrinth filter initially absorbs significantly more overspray (up to 18 kg/m² filter area) than conventional filter mats, thanks to its folded filter pockets. The subsequent fiberglass secondary filter only absorbs the finest residual particles. As a guideline, a service life of approximately 150 to 200 painting hours can be specified for the cardboard labyrinth filter, depending on the paint used. The fiberglass filter only needs to be replaced after approximately 900 to 1200 painting hours, i.e. only every 5th or 6th cardboard filter change. Easy Paint also has a lower intake opening to quickly and safely capture solvent vapors at the floor level or from floor pits. Thanks to this additional intake opening at the bottom, the Easy Paint can be connected to a floor pit or drip tray as an underfloor extraction system. The filter cassette, which can be inserted from the front, also makes filter changes easier. Standard extraction capacity Easy Paint 3500 Item No. 600025 Airflow rate with standard delivery * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW ex Connection fitting for extraction hose D = 300 mm Width in mm 2750 Total height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine at a special price.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Nodpfx Ajfi Nmpjgrjwl Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: new, Year of construction: 2026, pressing force: 150 t, DURENDUS 150 T Workshop Press – C-Frame Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered according to a specific customer order. We can supply this machine from stock or manufacture a new one for you – gladly taking individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in the workshop and industrial sector. Base price: €6,900 net Options (on request): The listed options are based on completed customer projects and allow for targeted adaptation of the machine to the respective application. The base version represents the basic functional model – in practice, it is most often expanded with additional equipment and configured to suit specific projects. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Adjustable pressure control - Sideways movement of the ram (900 mm) - Bending tool - Anti-twist cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ==== Technical Data & Information: ==== General Information Design: Workshop press Pressing force: 150 t (adjustable option) Total weight: approx. 1,400 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,650 mm ==== Working Area Clear width: 1,250 mm Clear depth: 400 mm Daylight: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 230 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Approach speed: 8 mm/s Return speed: 12.2 mm/s ==== Hydraulics & Drive Pump capacity: 20 l/min Motor power: 5.5 kW Hydraulic tank: 34 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Lever control Manual fine tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 6 kW ==== Equipment Height-adjustable crossbeams with bolt locking Chain mechanism for table adjustment Manometer for pressure display Emergency stop switch CE certification Dual-layer paint finish according to RAL ===== Pressing, removing, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, mounting press, straightening press, industrial press Nedsy Hrkuopfx Agrewl Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC norms, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for our hydraulic systems.

Year of construction: 2023, condition: as good as new (ex-display), THE EXTRA LARGE SHRINK WRAPPER In addition to small packaging machines for packaging small and medium-sized products, Italdibipack also offers EXTRA-LARGE “One-Step®” systems, with the Dibipack BIG, one of the largest models of the Dibipack Evolution line, designed and constructed to cover the Meet requirements. It is a convincing answer to the increasing demand for a large machine with large capacity and high performance. Ideal to pack large size and large surface products such as frames, pictures and panels. TECHNICAL SPECIFICATIONS TECHNICAL DATA DIBIPACK 6084 EVX Voltage supply: 400 V - 3 Ph + N Maximum required power: 7 KW Overall dimensions of the machine L x W: 1940 x 950 mm Worktop height (on stand): 920 mm Machine weight: 190 kg Sealing area W x L: 580 x 840 mm Maximum product height: 250 mm on request Impulse sealing system: bottom knife Maximum roll dimensions DIA x B: 250 x 800 mm Output: 4 - 6 pieces / min Notes: We reserve the right to make technical changes. The performance depends on the operator and the type of packaging MORE INFORMATION MORE INFORMATION These "giants" have the same specifications as the shrink wrapping machines of the Dibipack Evolution line, but with some peculiarities: for example, two holding magnets that keep the hood closed during the work cycle and two fans that ensure better circulation of heat air during shrinking. The machine works with heat seal and shrink films such as PVC (BLUE FILM) or polyolefin films (GREEN FILM – GOLDEN FILM). Machine manufactured according to CE guidelines. Nsdpfxemv Emus Agrowl

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Njdpfxoip Utae Agrowl Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,715 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Length: 13,860 mm ? Height: 4,000 mm ? ? width: 2,550 mm Nwjdpfelxwr Iox Agrjl ? Load compartment length (inside): 13,620 mm ? Load compartment height (inside): 2,715 mm ? Load-through height in the rear portal: 2,630 mm ? Load compartment width (inside): 2,480 mm ? Semi-mounted height: 1,150 mm ? Permissible total weight: 36,000 kg ? Unladen weight: 7,200 kg _____ Axles ? Krone axles with disc brakes ? Tire brand: No brand 385/65 R22.5 ? 1st axle Lift axle ? ABS ? ? Air suspension ? ? steel rims ? Mechanical supports ? Knorr brake position ? Wheel chocks _____ Body / add-on parts ? Side collision protection Open ? Tail lift, make: BÄR vertical, load capacity: 2000 KG ? Platform of the tail lift at full height ? with 2-fold roll-off protection ? Battery supply via SmartCharge (7-pin) ? 1 toolbox ? 2 row(s) of horizontally recessed slot-and-hole lashing rails ? Attachment: Height center 1st lashing row above floor 800 mm ? Attachment: Height center 2nd lashing row above floor 1600 mm _____ Floor ? 30 mm thick waterproof panel floor ? Floor loads of up to 7,000 kg forklift axle load ? Premium visual sealing ? 13 pairs of lashing rings embedded in the floor ? Forklift collision protection inside on front wall, approx. 250 mm high _____ Lighting / electrics ? Side marker lights (flashing function) ? 2 LED license plate lights ? 2 clearance lights with rubber arm, LED version ? Lighting carrier designed for tail lift operation ? 3-chamber tail lights ? 6 LED ceiling lights _____ Paintwork ? Chassis: RAL 9005 - deep black ? Body: RAL 9010 - pure white ? Axle hub: RAL 9005 - jet black ? Rims SILVERNATUR ? Load securing certificate in accordance with EN 12642 Code XL ? Certificate for load securing according to Daimler guideline 9.5 ? Certificate for load securing for beverage transportation (VDI 2700 Bl. 12) ? ADR approval certificate EX/II without FL, AT, MEMU

Condition: as good as new (ex-display), operating hours: 6 h, power: 4 kW (5.44 HP), volume flow: 0.57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, RENNER Industrie reciprocating compressor with refrigerant dryer Intake capacity 700 l/min (delivery rate 570 l/min) Maximum pressure 10 bar Pressure tank 270 l Motor power: 400 V, 4.0 kW Dimensions: 970 x 795 x 1880 mm Vertical design for industrial applications, robust belt guard, galvanized compressed air tank according to AD2000 guidelines (with inspection opening) with intermediate and aftercooler, vibration-damping metal components for effective vibration reduction, with refrigerant dryer, optional with automatic condensate drain for refrigerant dryer and tank; Njdpfjd Dhwnox Agrswl various other designs available.

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction Nodpofakkcefx Agrswl with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical System According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,715 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Vehicle information ? Length: 13,860 mm ? Height: 4,000 mm ? ? width: 2,550 mm ? Load compartment length (inside): 13,620 mm ? Load compartment height (inside): 2,715 mm ? Load-through height in the rear portal: 2,630 mm ? Load compartment width (inside): 2,480 mm ? Semi-mounted height: 1,150 mm ? Permissible total weight: 36,000 kg ? Unladen weight: 7,200 kg _____ Axles ? Krone axles with disc brakes ? Tire brand: No brand 385/65 R22.5 ? 1st axle Lift axle ? ABS ? ? Air suspension ? ? steel rims ? Mechanical supports ? Knorr brake position ? Wheel chocks _____ Body / add-on parts ? Side collision protection Open ? Tail lift, make: Dautel, vertical, 2,000 kg ? Platform size approx. 2520 x 2200 ? top flap above the tail lift ? with 2-fold roll-off protection ? Battery supply via SmartCharge (7-pin) ? 1 toolbox ? 2 row(s) of horizontally recessed slot-and-hole lashing rails ? Attachment: Height center 1st lashing row above floor 800 mm ? Attachment: Height center 2nd lashing row above floor 1600 mm _____ Nwedpfx Aottd D Negrel Floor ? 30 mm thick waterproof panel floor ? Floor loads of up to 7,000 kg forklift axle load ? Premium visual sealing ? 13 pairs of lashing rings embedded in the floor ? Forklift collision protection inside on front wall, approx. 250 mm high _____ Lighting / electrics ? Side marker lights (flashing function) ? 2 LED license plate lights ? 2 clearance lights with rubber arm, LED version ? Lighting carrier designed for tail lift operation ? 3-chamber tail lights ? 6 LED ceiling lights _____ Paintwork ? Chassis: RAL 9005 - deep black ? Body: RAL 9010 - pure white ? Axle hub: RAL 9005 - jet black ? Rims SILVERNATUR ? Load securing certificate in accordance with EN 12642 Code XL ? Certificate for load securing according to Daimler guideline 9.5 ? Certificate for load securing for beverage transportation (VDI 2700 Bl. 12) ? ADR approval certificate EX/II without FL, AT, MEMU

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension: Disc brake 430 mm Jost (formerly Mercedes DCA) axle units, 3 x 9 tons, with air suspension, air springs arranged centrally to the chassis longitudinal beam. First axle can be lifted with starting assist and manual forced lowering. Smart Board information center, lift/lower valve, BVA brake wear indicator. Tires and wheels: 6 wheels with tires size 385/65 R22.5, from various manufacturers (manufacturer's choice), with steel rims 11.75 x 22.5 ET 120. Fifth wheel: Mechanical version with single-sided operation in 2 speeds with pivoting base for air suspension. Braking system: According to E.G. standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS incl. RSS (Roll Stability System) and Premium modulator, Wabco Smartboard information center, aluminum air tank system. Electrical system: Nwjdpfsfi Nmusx Agrjl According to STVZO guidelines, with 2 five-chamber lights, type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x5-pole sockets, with side marker lights, 2 separate LED rear lights, 1 LED interior light. Tipping body/dump bed: Internally fully welded. Aluminum dump bed, side walls with 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide. Floor made of 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall reinforced, 4 mm thick, in a straight design. Rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 configuration, with a grain slide, or alternatively in a 1/2-1/2 configuration with a grain slide on each side. Aluminum round profile welded on the side and bottom for sealing the door gap on the rear doors. Rear doors partially covered with smooth aluminum. Operation of the universal door automatically pneumatic with separate lever that can be locked. Rear supports made of aluminum, can be swung out. Two retaining straps with rubber buffers on the tipping body, attached to the frame at the front wall. Hydraulic system: Tipping cylinder with large cylinder body Hydraulic cylinder mounted on the front wall with a max. working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees. Accessories: 6 Parlok fenders, complete mud flaps covering the entire vehicle width attached to the U-profile. Aluminum spare wheel holder. Folding side impact protection on the right side. Large tool box, type 860. Approx. 3 m aluminum ladder. 3 aluminum swing supports mounted centrally, approx. 150 mm higher. Additional centrally mounted support receiver for positioning a total of 2 supports to increase the loading width. Tarpaulin with a central light strip and separate reinforcements in the wear areas, approx. 660 gr./m2 quality, with tarpaulin system. Circumferential rubber rope in the rear end of the tarpaulin to be attached to two tension hooks on the rear swing support. Walkway on the frame in chassis color. Tarpaulin closure with quick-release fastener. Tarpaulin end at the rear with welded-in rubber rope to prevent water ingress. Robust folding underrun protection with two towing eyes left and right incl. locking pin. 2 "Clear-Pass" mud flaps on the fender according to EG standard, attached to the frame on the side. Aluminum grain chute with tarpaulin bag attached to the frame on the side. Holder for s

Condition: used, Alignment ruler, alignment rail, steel ruler -Angle: 90° -Dimensions: 3000/100/H15 mm -Weight: 28 kg Njdpfx Agofiqrqerswl

Condition: new, Year of construction: 2025, functionality: fully functional, Offer: SCHEER PA 8504 FLAGSHIP Panel Saw We are offering a state-of-the-art PA 8504 panel saw for sale. The machine has a table length of 4200 mm, a stop depth of 4650 mm, and a cutting length of 3100 mm. Machine specifications: - Maximum cutting height: 105 mm, with continuously variable cutting height adjustment - Automatic saw unit, continuously adjustable feed speed (2-100 m/min), return speed 130 m/min - Automated scoring saw adjustable via keyboard - Fully automatic angle clamping device - Two air cushion tables for optimal material processing - Slider with parallel stop and 6 adjustable clamping fingers for precise support - Integrated cross alignment unit and four-spindle lifting table (3100 x 2200 mm), loadable from both sides *The machine can be customized to your requirements, as we specialize in custom machine construction. Technical Features: Nwsdpfjwlnqusx Agrel - Powerful 11.0 kW saw motor, 2.2 kW scoring motor - Residual cut device for efficient work - Siemens PLC for control, with guard lock and integrated extraction ducts - Complies with CE guidelines Operating Ease: - 19" flat screen in the pivoting control panel - Modern Windows 10 operating system with graphical display of cutting plans - Wireless network capability (compatible with Windows, Linux, Mac, and Novell networks), remote maintenance and regular updates possible - Optional: Cutting plan optimization in the office (ARDIS) and label printing during sawing This machine offers you the most precise processing, maximum flexibility, and modern operating comfort. For further information and to arrange a viewing appointment, please contact us directly!