Used Guideline for sale (237)

Condition: used, Alignment ruler, alignment rail, steel ruler Bsdjfiqrqepfx Ad Ajlg -Angle: 90° -Dimensions: 3000/100/H15 mm -Weight: 28 kg

Condition: used, Straightening ruler, straightening rail -Angle: 32° Blsdpfx Adocn Rd Ts Aog -Dimensions: 3000/50/H8 mm -Weight: 8.4 kg

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Heated Press – Double-column Press – 700 × 500 mm Heated Plates, Sliding Table The machine shown here was built to a customer’s order and has already been delivered. We can manufacture this machine for you at short notice – including consideration of individual options as required. This is a hydraulic heated press with electrically heated platens and a manual sliding table for pressing, laminating, and forming processes under elevated temperature conditions. Blsdpfjy H Dtzex Ad Aeg Base price: €23,500 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine for the respective application. The base machine is a functional standard version – in practice, it is usually supplemented with additional equipment and configured specifically for the project. ==== Technical Data & Information: ==== General Information * Design: Double-column press * Pressing force: 30 t (adjustable) * Total weight: approx. 3,200 kg * Dimensions (W × D × H): 2,000 × 1,500 × 2,850 mm ==== Working Area * Table size: 700 × 500 mm * Heated plates: 700 × 500 × 65 mm * Installation height: max. 800 mm * Table traverse: 500 mm (manual) ==== Table & Ram * Ram stroke: 600 mm * Cylinder diameter: Ø 130 mm * Piston rod: Ø 80 mm * 8-fold guide for parallelism ==== Speeds * Working speed: 9 mm/s * Return speed: 25 mm/s ==== Hydraulics & Drive * Working pressure: max. 240 bar * Pump capacity: 12 l/min * Motor power: 3 kW * Hydraulic tank: 80 l * Pressure accuracy: ±5 bar * Hydraulic system with air cooling ==== Controls & Operation * SIEMENS S7-1200 controller with 7" touch panel * Programmable parameters (stroke, pressure, time, cycles) * Two-hand operation * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 25 kW (including heating) ==== Equipment * Electrically heated press plates up to 200 °C * Temperature monitoring with sensors * Passive pressure holding function up to 60 minutes * Hydraulic and electronic overload protection * Safety limit switches * CE certification * Two-layer coating according to RAL standard ===== Hot pressing, laminating, plastics processing, rubber and composite material processing, molding Heated press, hydraulic press, double-column press, thermal press, laminating press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully conform to the Brazilian national safety guideline NR 12, which is based on these standards. Our core strength is special machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic components of our presses, we primarily use parts from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 500 t, DURENDUS 500 T Workshop Press – C-Frame Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here was built and delivered to a customer as a custom order. We can manufacture this machine for you on very short notice – with pleasure also considering individual options. This is a hydraulic workshop press designed for pressing, straightening, and assembly work in workshop and industrial environments. Base price: €46,950 net Options (on request): The listed options are based on completed customer projects and allow for targeted adaptation of the machine to each specific application. The base machine is a functional standard version – in most cases, it is supplemented with additional features and configurated specifically for the project. * Table plate with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral displacement of the press ram (1,000 mm) * Bending tool * Anti-rotation cylinder with manual travel adjustment * V-profile straightening anvil in combination with table plate * LED lighting * Foot switch * Cooling ===== Technical Data & Information: ==== General Information * Type: Workshop press * Press force: 500 t (optionally adjustable) * Total weight: approx. 5,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working Area * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 400 mm * Piston rod: Ø 265 mm * Height adjustment: via chain mechanism ==== Speeds Bjdpfxsy H Drwo Ad Aelg * Idle speed: 8.6 mm/s * Return speed: 15.3 mm/s ==== Hydraulics & Drive * Pump capacity: 65 l/min * Motor output: 30 kW * Hydraulic tank: 150 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine-tuning via hand lever * Connection: 400 V / 50 Hz * Total power consumption: approx. 32 kW ==== Equipment * Height-adjustable crossbeam with pin locking * Chain mechanism for table adjustment * Pressure gauge * Emergency stop switch * CE certification * Two-coat finish to RAL standard ===== Pressing, extracting, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, single-column press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machine guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety guideline NR 12, which builds on these standards. Our great strength is in special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly affordable prices. For the hydraulic system, we mainly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 400 t, DURENDUS 400 T Workshop Press – Single-Column Press – 1,600 mm Clearance Width, 550 mm Stroke The machine shown here has already been built and delivered as a custom order. We can manufacture this machine for you at short notice – also tailored to individual options as required. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Base price: €35,950 net Blsdsy H Dn Eopfx Ad Aog Options (on request): The listed options are based on realised customer projects and allow precise adaptation of the machine to your specific application. The basic machine represents a functional standard configuration – in practice, it is usually expanded with additional equipment and configured on a project-specific basis. * Table plate with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral movement of the press ram (1,000 mm) * Bending tool * Anti-rotation cylinder with manual travel adjustment * V-profile straightening fixture in combination with table plate * LED lighting * Foot switch * Cooling ===== Technical Data + Information: ==== General Information * Design: Workshop press * Pressing force: 400 t (optionally adjustable) * Total weight: approx. 4,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working Area * Clearance width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 360 mm * Piston rod: Ø 235 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 7.8 mm/s * Return speed: 13.7 mm/s ==== Hydraulics & Drive * Pump capacity: 48 l/min * Motor power: 22 kW * Hydraulic tank: 120 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Manual lever operation * Precise manual adjustment via control lever * Connection: 400 V / 50 Hz * Total connected power: approx. 23 kW ==== Equipment * Height-adjustable crossbeam with pin locking * Chain mechanism for table adjustment * Manometer for pressure indication * Emergency stop switch * CE certification * Two-coat paint finish according to RAL ===== Pressing, extraction, assembly work, straightening operations, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customised quote. Our hydraulic presses are manufactured according to German machinery guidelines as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they also fully comply with the Brazilian NR 12 national safety standard, which builds on these. Our great strength is in custom machine construction and press automation. We offer made-to-order hydraulic presses at surprisingly attractive prices. For the press hydraulics, we mainly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 150 t, DURENDUS 150 T Workshop Press – C-Frame Press – 1,250 mm Clear Width, 400 mm Stroke The machine shown here was built and delivered according to a specific customer order. We can supply this machine from stock or manufacture a new one for you – gladly taking individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in the workshop and industrial sector. Base price: €6,900 net Options (on request): The listed options are based on completed customer projects and allow for targeted adaptation of the machine to the respective application. The base version represents the basic functional model – in practice, it is most often expanded with additional equipment and configured to suit specific projects. - Table plate with X-shaped T-slot 700 × 1,000 × 100 mm - Adjustable pressure control - Sideways movement of the ram (900 mm) - Bending tool - Anti-twist cylinder with manual stroke adjustment - V-profile straightening block in combination with table plate - LED lighting - Foot switch - Cooling system ==== Technical Data & Information: ==== General Information Design: Workshop press Pressing force: 150 t (adjustable option) Total weight: approx. 1,400 kg Overall dimensions (W × D × H): 1,800 × 900 × 2,650 mm ==== Working Area Clear width: 1,250 mm Clear depth: 400 mm Daylight: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 1,250 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 230 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Approach speed: 8 mm/s Return speed: 12.2 mm/s ==== Hydraulics & Drive Pump capacity: 20 l/min Motor power: 5.5 kW Hydraulic tank: 34 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Lever control Manual fine tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 6 kW ==== Equipment Height-adjustable crossbeams with bolt locking Chain mechanism for table adjustment Manometer for pressure display Emergency stop switch CE certification Blsdpfxoy Hrkus Ad Aog Dual-layer paint finish according to RAL ===== Pressing, removing, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, mounting press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quote. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC norms, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for our hydraulic systems.

Condition: used, maximum load weight: 31,240 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2023, next inspection (TÜV): 03/2027, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2023, Equipment: ABS, LANGENDORF/ FTS 3-Axle Aluminium Tipper "Combiliner" First registration 03/2023, single owner Mileage only 114,761 km The transport solution for intermodal haulage of both liquid and solid goods without conversion. The module can be removed at any time. System advantages: Avoids empty runs through swap operations. For seasonal transports, can be converted to a pure tipper for higher payload. Economical and ecological benefits. Module installed in the tailgate, tipper usable without restrictions. Rinse function. The vehicle complies with QS and GMP+ guidelines, certified by TÜV Süd. Unladen weight approx.: 7,760 kg Tipper volume 47.5 cbm Slurry bag volume 26.5 cbm Pneumatic vibrator Grain outlet in the floor, grain channel with dust protection sack Aluminium water tank 50 L with compressed air connection, hose reel, and shower head (as required by QS and GMP) SAF axles in reinforced "CD" version, with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer EBS with rollover stability support (RSS) WABCO Optiturn for reduced turning radius WABCO Smartboard with axle load display Six 385/65 R 22.5 tyres SPEEDLINE high-gloss aluminium rims Bsdpfx Aoy Iq Ined Ajlg FTS Combiliner module equipment: Vogelsang rotary lobe pump GL 186-184Q, weight-optimised Spade slide valves 4-inch and 6-inch Operation via remote control and programmable sequences Manual control unit on top for all hydraulic functions 2-tank venting/degassing and overflow Rinse function via two flange connections (left/right rinsing) Rinse baffles in the wire baskets Electric motor-driven winding reel with hydraulic brake RENTING is the new BUYING—immediately available from us, also as a FULL-SERVICE RENTAL-----

Condition: new, Year of construction: 2026, pressing force: 30 t, DURENDUS 30 T Workshop Press – C-Frame Press – 700 mm Clear Width, 400 mm Stroke The machine shown here has already been built and delivered as a customer-specific order. We can supply you with this model from stock or manufacture it anew – with consideration for customized options if required. This is a hydraulic workshop press designed for pressing, straightening, and assembly tasks in both workshop and industrial environments. Base price: €3,550 net Options (available on request): The listed options are derived from completed customer projects and enable precise adaptation of the machine to the specific application. The basic model provides a fully functional standard specification; in practice, it is most often enhanced through additional equipment and configured according to project requirements. Cross-grooved T-slot table (from 60 t) Pressure adjustment Lateral movement of the ram (from 60 t) Bending tool (from 60 t) Anti-rotation cylinder with manual travel adjustment V-profile straightening block in combination with table plate LED lighting Foot switch Cooling system ===== Technical Specifications + Information: ==== General Data Design: Workshop press Pressing force: 30 t (optionally adjustable) Total weight: approx. 500 kg Overall dimensions (W × D × H): 1,150 × 700 × 2,350 mm ==== Working Area Clear width: 700 mm Clear throat depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 700 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 115 mm Piston rod: Ø 65 mm Height adjustment: via chain mechanism ==== Speeds Idle speed: 10.4 mm/s Return speed: 15.3 mm/s ==== Hydraulics & Drive Pump capacity: 6.5 l/min Motor power: 1.5 kW Hydraulic tank: 14 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Controls & Operation Bljdjy Hixcepfx Ad Aog Hand lever operation Manual fine-tuning via hand lever Connection: 400 V / 50 Hz Total connected load: approx. 2 kW ==== Equipment Height-adjustable crossbeam with pin locking Chain mechanism for table adjustment Manometer (pressure gauge) Emergency stop switch CE certification Dual-layer coating to RAL standard ===== Pressing, ejection, assembly, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quote. Our hydraulic presses are manufactured according to German machinery directives and European Machinery Directive 2006/42/EC, as well as all EC norms and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety guideline NR 12, which builds upon these standards. Our core strength is custom machine building and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. Our presses are equipped primarily with components from leading European manufacturers.

Condition: used, mileage: 10 km, power: 130 kW (176.75 HP), first registration: 04/2026, fuel type: diesel, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,836 mm, total width: 2,040 mm, total height: 2,590 mm, loading space length: 4,051 mm, loading space width: 1,832 mm, loading space height: 1,961 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, * Exhaust system, EU6e (EC) * Front-wheel drive * 8-speed automatic transmission * 2.0 l / 130 kW (4V) BIT diesel engine * Start-stop system with brake energy recuperation * One front tow hook * Fixed towing device * 75 l fuel tank * Certified for 3.5t * Reinforced front axle * All-season tires * 520 A (92 Ah) battery * Electronic immobilizer * Electrical terminal strip and KFG preparation * 'Climatronic' air conditioning in the driver's cab * Daytime running lights with assistance and coming/leaving home function * LED main headlights with LED daytime running lights * LED interior lighting concept in passenger/cargo area * Fog lights with cornering light * Side marker lights * Headlight cleaning system, washer fluid level indicator, heated washer nozzles * Step illumination * Exterior mirrors, electrically adjustable, heated, and power folding Bledpfx Adsy Hniys Ajg * Exterior mirrors left and right, convex, with integrated LED indicators and wide-angle section * Rear step, half-width * Entry handles on rear pillars * Rear wing doors with enlarged opening angle * Intermittent wiper control with light and rain sensor * Sliding door on right * Laminated safety glass windscreen with heat insulation and heating * Airbag for driver and passenger, passenger airbag deactivation * Roof console with storage compartments, two 1-DIN bays, and reading light * Sun visors, folding and side swiveling * Electronic parking brake * Premium interior noise insulation features * Lockable, illuminated glove compartment * Heated leather multifunction steering wheel with Tiptronic * 12V power socket, cup holder * Three-point automatic seat belts with height adjustment * 12V power socket in driver's cab (instrument panel) * Seatbelt monitoring, electrical contact in belt buckle * 2 remote keys * Keyless Go * Auxiliary water heater with remote control * Chrome package * 'ergoActive' suspension seat, left * Double passenger bench seat on right, with storage compartment and folding middle backrest * 'Toronto Grid' fabric seat upholstery * Individually adjustable seat heating for driver and passenger * Digital instrument cluster * Tire pressure monitoring system * USB Type-C data and charging ports with increased power output * 4 speakers: 2 tweeters, 2 woofers * MAN Media Van Navigation Business (12.9-inch) * Digital radio reception (DAB+) * MAN SmartLink * MAN Connect * Comfort telephony with LTE and wireless charging * With voice control * Hill-start assist * Emergency brake assist * ESP with electronic differential lock, anti-slip regulation (ASR), and ABS * Front and rear park assist * ACC Stop & Go * Traffic sign recognition * Reversing camera system with dynamic guidelines * High beam assistant 'Light Assist' * Attention and drowsiness warning * Lane change assist * Crosswind assist * Blind spot warning both sides and start-off warning * Turn assist * Emergency assist (active lane keeping assist and emergency assist and traffic jam assist) * Intelligent speed assist * With multifunction camera Cruise Assist Plus * Passenger compartment and cargo area with wooden floor in load compartment with wheel arch covers * Lashing rails (airline) in load compartment: side walls and partition wall * Entry handle on partition wall in load compartment * Side interior panelling in load compartment made from plastic hollow chamber panels up to roof frame * Lashing eyes for cargo securing * Driver assistance distribut

Condition: new, power: 118 kW (160.44 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * Truck CO 35C16H3.0 D Double Cab 6+1 New Model, 2026 * New vehicle. * Wheelbase: 3450 mm * Gross weight: 3500 kg * 06520 - Trailer socket 12V, 13-pin * 73239 - Preparation for EC control unit D 4.1 * 07638 - Reverse warning sound, switchable * 08628 - Roof storage above windscreen * 79247 - USB socket driver and passenger side – charging connection * 77742 - Grab handle on A-pillar * 07820 - Tow bar with ball head * 01565 - Fuel tank 86L * 02210 - Spare wheel dimension * 00726 - Spare wheel mounting at end of frame * 06094 - Parabolic springs with auxiliary spring, rear axle * 76104 - Air conditioning * 07196 - Air conditioning compressor 170ccm * 00259 - Comfort driver's seat with armrest and lumbar support, adjustable * 79336 - Radiator grille with chrome inserts * 02443 - Leather steering wheel with function buttons for radio, telephone, menu * 72619 - Steering column height and tilt adjustable * 72841 - Light and rain sensor * 06555 - Fog lights * 01606 - Digital radio DAB with 7-inch touchscreen * 00676 - Reversing camera with dynamic guidelines * 75082 - Passenger seat bench with multifunctional storage compartment * 05925 - Additional programmable speed limiter Bodpfx Adoxnf Tij Aelg * 00190 - Oil pan protection * 6-speed * We are happy to provide you with a personalised financing/leasing offer! Contact us! * Sale only to tradespeople or for export. Subject to prior sale and errors.

Condition: new, mileage: 50 km, power: 115 kW (156.36 HP), color: white, gearing type: automatic, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: Engine: 2.3 l D Euro 6d Final, 115 kW (156 hp), Transmission: HI-MATIC 8-speed automatic gearbox, Rear suspension: leaf spring, Wheelbase: 4100 mm, Rear doors with entry assist on passenger side, 2 LED cargo area lights, Seats not heated, Fabric seat covers, 4G connectivity box incl. TCO service contract, Front headlights: halogen, Daytime running light system, Light and rain sensor, Trailer pre-installation 12V 13-pin, Mirrors suitable for 2200 mm body width, Tire pressure monitoring system (TPMS), Side vehicle designation, Proactive lane-keeping assist (ELK), Emergency braking assistant AEBS with City Brake, Daily MY 2024, Electrically adjustable and heated exterior mirrors, Vehicle width 2000 mm, Over-cab storage compartment, Driver drowsiness alert system (DriverDrowsinessAttentionWarning), Central locking with remote control, Speed limiter: 160 km/h, Rear wall insulation, Traffic sign recognition with intelligent speed assistant (ISA), Electric windows for front entry doors, Front airbags for driver and passenger with seatbelt pretensioners, Plastic steering wheel, 20-litre AdBlue tank under cab, Steel wheels, Tire repair kit without spare wheel, 63-litre fuel tank, Rear axle ratio i 3.615, High plastic sidewall and door trim, Wooden floor + wheel arch trim, Rear door opening angle 260°, External loading lights above rear doors, Comfort driver's seat with armrest and lumbar support, adjustable in height, tilt and longitudinally, hydraulically suspended, additional speed limiter, Front obstacle detection (MOIS), Rear-view camera with dynamic guidelines (without parking sensors), Splash guards front and rear axles, Adaptive driving dynamic control with crosswind assistant, Tires: 235/65 R16, Parabolic rear springs reinforced, Stage 2, White IC 194, USB socket on driver side, Digital radio DAB with 7-inch touchscreen, Fog lights, Manual air conditioning, Cruise control, Comfort driver's seat with armrest and lumbar support, adjustable in height, tilt and longitudinally, hydraulically suspended, and much more. Mr. Rudolph is happy to assist you by phone at: Should you wish to lease or finance the vehicle, we are pleased to provide you with a tailored offer. We are also happy to accept your used commercial vehicle as a trade-in. Errors and prior sale excepted! For further information, please visit our homepage: ... - ESP, Particle filter, Partition wall Bedpfx Aeytaflod Ajlg = Further information = Engine capacity: 2,287 cc Gross vehicle weight: 3,500 kg Please contact Tobias Ebert for more information.

Condition: new, mileage: 50 km, power: 115 kW (156.36 HP), color: white, gearing type: automatic, Equipment: ABS, air conditioning, central locking, power assisted steering, Mr. Rudolph will be happy to assist you by phone at: Engine: 2.3 l D EU6d final, 115 kW (156 hp), HI-MATIC 8-speed automatic transmission, rear axle with leaf spring suspension, wheelbase 4100 mm, rear doors with entry assist on passenger side, 2 LED cargo area lights, non-heated cloth seats, 4G Connectivity Box incl. TCO service contract, halogen front headlights, daytime running lights, light and rain sensor, tow bar preparation 12V 13-pin, exterior mirrors for 2200 mm body width, TPMS (tire pressure monitoring system), side vehicle designation, proactive steering assistant with lane keeping (ELK), emergency braking assistant AEBS with city brake, Daily MY 2024, electrically adjustable and heated exterior mirrors, vehicle width 2000 mm, overhead storage above driver’s cabin, driver drowsiness attention warning, central locking with remote, speed limiter 160 km/h, rear wall insulation, traffic sign recognition with intelligent speed assistant (ISA), electric windows for front entry doors, front airbags for driver and passenger with seatbelt pretensioners, plastic steering wheel, 20 l AdBlue tank under driver’s cab, steel rims with tire repair kit (no spare wheel), 63 l fuel tank, rear axle ratio i 3.615, high plastic side wall and door trim, wooden floor and wheel arch covers, 260° rear door opening angle, exterior loading lights above rear doors, comfort driver’s seat with armrest and lumbar support (height, tilt, and longitudinal adjustment, hydraulically suspended), additional speed limiter, moving off information system (MOIS), reversing camera with dynamic guidelines (without parking sensors), splash guards front and rear axle, adaptive dynamic driving control with crosswind assist, 235/65 R16 tires, reinforced parabolic rear springs stage 2, white IC 194, driver’s side USB socket, DAB digital radio with 7 inch touchscreen, fog lights, manual air conditioning, cruise control, comfort driver’s seat with armrest and lumbar support (height, tilt, and longitudinal adjustment, hydraulically suspended), and much more. Mr. Rudolph will be happy to assist you by phone at: Should you wish to lease or finance the vehicle, we would be glad to provide you with a personalized offer. We are also happy to consider your used commercial vehicle as a trade-in. Subject to errors and prior sale! Further information can be found on our homepage: ... - ESP, particulate filter, partition = Further information = Engine displacement: 2,287 cc Gross vehicle weight: 3,500 kg Blsdpjyrw Saofx Ad Aeg Please contact Tobias Ebert for further details.

Condition: used, mileage: 100 km, power: 152 kW (206.66 HP), color: white, gearing type: automatic, loading space length: 45,000 mm, loading space width: 18,000 mm, loading space height: 19,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: Daily 35C21 HA8V panel van / wheelbase 4,100 mm / ! 2 units available ! Cargo space dimensions LxWxH in mm: 4,500 x 1,800 x 1,900, rear doors with 260° opening angle, seat belts with warning signal for driver and passenger, tire pressure monitoring system (TPMS), proactive lane departure warning with lane keeping assist (ELK), emergency braking assistant AEBS with city brake, electrically adjustable and heated exterior mirrors, driver drowsiness warning system (Driver Drowsiness Attention Warning), traffic sign recognition with intelligent speed assistant (ISA), speed limiter 160 km/h, tow bar with ball head, towing capacity 3.5 t, integrated 86-litre fuel tank, automatic HI-MATIC 8HP torque converter transmission, wooden floor + wheel arch trim, reversing camera with dynamic guidelines, 195/75R16 all-weather tires, smoker package, ashtray and cigarette lighter, My Iveco Infotainment 10-inch with navigation, air conditioning with climate control, adaptive cruise control (ACC), seat heating, luxury driver’s seat with armrest and lumbar support, adjustable for height, tilt and length, hydraulically suspended, heated, additional hot water heater, and much more. Mr. Rudolph will be happy to assist you by phone at: , If you would like to lease or finance the vehicle, we will be happy to provide you with an individual offer. We will also gladly take your used commercial vehicle in trade. Subject to errors and prior sale! For more information, please visit our website: ... ESP, navigation system, auxiliary heater, particulate filter, partition wall Bedpfsy Hfhtjx Ad Aelg = More information = Engine displacement: 2,998 cc Gross vehicle weight: 3,500 kg Contact Tobias Ebert for further information.

Condition: used, mileage: 100 km, power: 152 kW (206.66 HP), color: white, gearing type: automatic, loading space length: 45,000 mm, loading space width: 18,000 mm, loading space height: 19,000 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - Mr. Rudolph will be happy to assist you by phone at: Daily 35C21 HA8V Panel Van / Wheelbase 4,100mm / ! 2 units available ! Cargo space dimensions LxWxH in mm: 4,500 x 1,800 x 1,900, rear doors with 260° opening angle, seat belts with warning signal for driver and co-driver, tire pressure monitoring system (TPMS), proactive steering assistant with lane departure warning (ELK), emergency braking assistant AEBS with City Brake, electrically adjustable and heated exterior mirrors, driver drowsiness detection system (DriverDrowsinessAttentionWarning), traffic sign recognition with intelligent speed assist (ISA), speed limiter 160 km/h, tow bar with ball head, towing capacity 3.5 t, integrated 86 l fuel tank, automatic HI-MATIC torque converter transmission 8HP, wood flooring + wheel arch covers, reversing camera with dynamic guidelines, 195/75R16 all-season tires, smoker package, ashtray and cigarette lighter, My Iveco Infotainment 10-inch with navigation, air conditioning with automatic climate control, adaptive cruise control (ACC), seat heating, luxury driver’s seat with armrest and lumbar support, adjustable in height, tilt, and longitudinal direction, hydraulically suspended, heated, auxiliary hot water heater, and much more. Bljdpfx Aoy Hfhmjd Asg Mr. Rudolph will be happy to assist you by phone at: , If you wish to lease or finance the vehicle, we are happy to provide you with a tailored offer. We also gladly accept your used commercial vehicle in part exchange. ! Subject to errors and prior sale ! Further information can be found on our website: ... ESP, navigation system, auxiliary heater, particulate filter, partition wall = Further information = Engine displacement: 2,998 cc Gross vehicle weight: 3,500 kg Please contact Tobias Ebert for more information.

Condition: new, maximum load weight: 6,707 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,560 mm, loading space width: 2,480 mm, loading space height: 2,915 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Krone SZK 18 Box Event Mega Black Vehicle Information • Loading length: 13,860 mm • Height: 4,000 mm • Width: 2,550 mm • Internal loading length: 13,560 mm • Internal loading height: 2,915 mm • Internal loading width: 2,480 mm • Fifth wheel height: 950 mm • Permissible total weight: 30,000 kg • Unladen weight: 6,707 kg • Rear portal through-loading height: 2,850 mm _____ Axles • BPW axles with disc brakes • 445/45 R19.5 • Jost landing gear • ABS • Mechanical axle cap mileage counters • Air suspension • Steel rims • Wheel nuts with protective caps • Wheel chocks _____ Body / Attachments • Plastic toolbox • Box body • Panel thickness: 28 mm • Internal fork lift guard on sides, approx. 320 mm high • 1st lashing rail: 600 mm above floor (center height) • 2nd lashing rail: 1,600 mm above floor (center height) • 3rd lashing rail: 2,200 mm above floor (center height) Blsdpjxw Iywofx Ad Aog • Internal locking bars • 3 load securing posts _____ Floor • 30 mm thick waterproof composite floor • Floor load capacity up to 7,000 kg fork axle load • Tear plate recessed at rear in floor plate (4x700mm) • Premium protective coating _____ Lighting / Electrics • Multi-chamber LED rear lights • LED side marker lights with indicator function • 2 outline marker lights with rubber arms, LED version • 2 LED license plate lights • 4 KRONE LED ceiling lights _____ Paintwork • Body: black • Chassis: RAL 9005 deep black • Axle hubs: RAL 9005 deep black _____ • Load securing certificate according to EN 12642 Code XL • Load securing certificate according to Daimler Guideline 9.5 • Load securing certificate for beverage transport (VDI 2700 Sheet 12)

Condition: used, axle configuration: 3 axles, first registration: 02/2011, loading space length: 7,585 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 27 m³, Chassis: Aluminium, reinforced design Two fully automatically welded I-beam longitudinal members with welded crossmembers, 1,600 mm chassis width Axles and Suspension - "430 mm off-road disc brakes" DOA axle assemblies, 3 x 9 t with DC air suspension, first axle liftable with starting aid (Wabco system), Wabco Smart Board, raise and lower valve. Blodpfx Aoy Ekx Ied Aog Tyres and Wheels: 6 wheels with GreBe 385/65 R 22.5 tyres, approximately 90-100% tread on ALCOA aluminium rims, 11.75x22.5 ET 120 King Pin: 2" bolted into a 10 mm thick plate Landing Legs: 1x aluminium drop-leg landing gear for uncoupling the empty trailer Brake System: To E.C. standards, two-line Wabco system, spring-actuated parking brake acting on two axles and Wabco EBS-E system with RSS (Roll Stability Support), aluminium air tanks Electrical System: Built to StVZO guidelines, with 2x LED five-chamber lights (Aspöck system), 24V installation with two 7-pin sockets and one 15-pin socket, LED side marker lights, 2 separate halogen reversing lamps Tipping Body / Hopper – Conical Floor Construction: Aluminium hopper design with trapezoidal floor and rectangular top rail, fully assembled and welded from patented profiles and aluminium plates, side walls of 4 mm aluminium 5086H24, floor 8 mm in a high-abrasion alloy (5383H34), two strong top rail profiles fully welded to the side walls. Front wall sloped at 20°, 4 mm thick; rear wall approx. 20° slope, swinging tailgate in smooth design without chute, tailgate resting, double-pivot hinges flush with top rail, automatic pneumatic central locking with two locking hooks, tailgate clamps on hopper, rear overhang suitable for paver applications. Hydraulic System: Hydraulic cylinder mounted on the front wall, working pressure of 150 bar, with approx. 2.5 m hose and 1" quick-release half-coupling, tipping angle approx. 48-49° Accessories: 6 Parlok mudguards, 2 "STAS" swinging mud flaps, 2 wheel chocks, robust folding underrun protection with impact guard, 1 central chain, 1 aluminium roof bow, additional inclinable aluminium bow in front of tailgate, 1 plastic toolbox, Cramaro sliding tarpaulin electrically operated with remote control, 2 Ferry eyes at rear frame (for rope attachment), 3 m aluminium ladder, shovel holder inside front wall, nearly new plastic wear linings on side and front walls! (Original cost approx. €5,800), shovel & broom holder left on frame, etc. Unladen weight: 5,030 kg Offer and images non-binding.

Condition: refurbished (used), functionality: fully functional, total length: 2,772 mm, total height: 1,683 mm, total width: 2,027 mm, overall weight: 2,869 kg, iAM Marketplace – the official used machinery partner of Stratasys! Several professionally refurbished Stratasys F900 3D printers are available immediately. Each machine undergoes comprehensive inspection according to strict guidelines, with all print-relevant components overhauled and validated through multiple test prints. The result: reliable performance, high print quality, and a cost-effective alternative to new equipment. Bjdpfx Adsytckqo Aelg The machines vary in year of manufacture, configuration, and operating hours. Detailed information regarding condition and price range is available upon request. The Stratasys F900 is an industrial large-format FDM 3D printer featuring a build volume of 914.4 x 609.6 x 914.4 mm. This machine is suitable for functional prototypes, end-use parts, and production tooling. It offers high precision, repeatable print results, and dependable production throughput. More than 25 materials can be processed.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 02.086.00, pressing force: 40 t, For sale is a try-out press (spotting press) from manufacturer REIS with a maximum pressing force of 40 t. The machine features a table size of 1,280 × 900 mm, a maximum installation height of 1,035 mm, and a stroke up to 1,100 mm, making it suitable for spotting, adjustment operations, and tool modifications in mould and tool making. ##### Technical Data & Information: Spotting Press – 40 t – 1,280 × 900 mm ==== General Details - Design: 4-column press - Manufacturer: REIS - Year of manufacture: 1984 - Press force: 40 t (adjustable) - Return force: 20 t - Distance between columns: 930 × 705 mm - Max. installation height: 1,035 mm - Table size: 1,280 × 900 mm Bljdpey Ec H Refx Ad Ajg - Overall dimensions (W x D x H): approx. 3,800 × 1,850 × 3,600 mm - Total weight: approx. 9,000 kg - T-slots: DIN 650 – 18 mm ==== Hydraulic Cylinder - Stroke: 0–1,100 mm (adjustable) - Cylinder diameter: Ø 160 mm ==== Hydraulic System & Drive - Flow rate: 24 l/min - Operating pressure: 200 bar - Motor power: 9.5 kW ==== Movement System - Ram swivel unit: approx. 175° - Extendable table: yes - Table ejector: available ==== Controls - Operation: Control panel - Additional function control: Oil ports for core pulls (2 units) ==== Safety - Mechanical anti-drop protection ==== Electrical Connection - Main supply: 400 V AC - Fuse protection: 35 A - Frequency: 50 Hz - Connected load main motor: 9.5 kW ##### Areas of application: spotting, adjustment, toolmaking, mould making, plastics engineering, automotive, maintenance (spotting press, try-out press, test press, hydraulic press, 40 t press, 40 tonne press, 4-column press, tool adjustment press, tryout press, tool try-out press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customised quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety guideline NR 12, which builds on these standards. Our core strength lies in custom machine construction and press automation. We supply bespoke hydraulic presses at surprisingly affordable prices. The hydraulic systems of our presses predominantly utilise components from leading European manufacturers.

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 54900 € 1037.61 € Doppelsäulenführung 5400x41x1,3 mm 20-100 m/min 440 mm 440 mm 610x440 mm rund 440 mm, quadrat 440 Bledpfeynnhdsx Ad Ajg rund 430 mm, quadrat 430 rund 320 mm, quadrat 260 807,5 mm 1.1 kW 4 kW 0.12 kW 2850 mm 2350 mm 2000 mm 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 61.900,--

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 61900 € 1169.91 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 540 mm 540 mm 670x540 mm rund 540 mm, quadrat 540 rund 510 mm, quadrat 510 rund 270 mm, quadrat 250 805 mm 2.2 kW 4 kW 0.12 kW 3100 mm 2350 mm 2150 mm 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping Bedpfsynm Rqsx Ad Aolg micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 70.200,--

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 45100 € 861.41 € Doppelsäulenführung 5200x34x1,1 mm 20-100 m/min 360 mm 360 mm 610x360 mm rund 360 mm, quadrat 360 rund 360 mm, quadrat 360 rund 325 mm, quadrat 265 735 mm 1.5 kW 3 kW 0.12 kW 2850 mm 2250 mm 1870 mm 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter Bedewirhxopfx Ad Aelg optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 50.900,--

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 34400 € 657.04 € Doppelsäulenführung 4380x34x1,1 mm 20-100 m/min 325 mm 325 mm 400x325 mm rund 325 mm, quadrat 325 rund 300 mm, quadrat 265 rund 190 mm, quadrat 190 655 mm 1.1 kW 2.2 kW 0.12 kW 2130 mm 2150 mm 1650 mm 1860 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice Bodpfx Aswirhred Ajlg hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping micro coolant equipment laser cutting line ALTERNATIVE: model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 38.900,--

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections Bljdpsy Ei R Ajfx Ad Asg • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle Description Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Type: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel coupling with sliding mechanism and self-lubricating (Jost JSK type), mounted on support frame • Reversing camera fully installed Bodywork: • Execution of all chassis modifications required for crane installation, including removal and installation of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork modifications are carried out in strict compliance with the bodybuilder guidelines of the respective chassis manufacturer and executed in premium quality. • Complete assembly of a proprietary designed and in-house manufactured special subframe made of fine-grained steel for crane and superstructure. The fully welded and bolted subframe to the chassis frame guarantees exceptional torsional rigidity and outstanding stability for the crane vehicle. A unique feature is the subframe construction, executed to the highest quality and coated in chassis color. • Installation/bolting of the crane and main outrigger support on the subframe. Installation of all hydraulic and electrical connections. Installation position: Front • Removable drop-side platform in steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Platform body painted in RAL (chassis colour) • Removable aluminium side boards by Suer, height 600 mm, anodised finish with step treads, removable Kinngripp stakes • Standard platform floor with welded 4 mm steel checker plate painted in RAL (chassis color) • 6 retractable lashing eyes, 2500 daN each side, set in perforated rails for flexible arrangement • 4 chain lashing points 6500 daN (2 front, 2 rear on body) • Robust front wall made from welded frame, welded 4 mm sheet steel and 5 accessory hooks, wall height approx. 1300 mm, painted steel version, with 2 folding lashing eyes welded on for securing straps • Cladding panels, mudguards made from aluminium checker plate (sandblasted, powder-coated, and painted); please specify RAL color • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder-coated, and painted); specify RAL color; size and arrangement depend on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stake pockets, 2 rows (as agreed), approx. 80 cm from front and rear walls • Holders (for outrigger pads, crane plates) made of galvanized steel • Additional stabilizing support mounted under chassis • Installation of underride protection at rear and additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections at front for semi-trailers and also at rear for trailers Blsdpey Ei R Njfx Ad Aeg New crane, FASSI F545 RA 2.27, continuous rotation, fully assembled, installed and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support pads with holders, arrangement per production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual, crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 beacons on the FH roof • 2 strobe lights in engine hood • 2 LED lights under bodywork at rear, left and right, position per agreement • 4 LED working lights, 2 each left and right

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 3,800 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis - New Vehicle: - NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x4, wheelbase 3700 mm • Fifth wheel with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Carrying out all necessary chassis work for crane installation, removal and installation of components, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and bodywork comply with the body mounting guidelines of the respective chassis manufacturer and are executed accordingly in top quality. • Complete assembly of a special auxiliary frame developed in-house design and manufactured in-house, made of fine-grained steel, for crane and bodywork. The fully welded and chassis-bolted auxiliary frame guarantees exceptional torsional rigidity and perfect stability of the crane vehicle. The distinctive feature is the design of the auxiliary frame. Production is to the highest quality standards and painted in chassis color. • Mounting/bolting the crane and main stabilizer to the auxiliary frame. Installation of all hydraulic and electrical connections. Mounting position: front. • Dropside body as removable steel/welded construction • Length approx. 380 cm, width approx. 248 cm • Dropside body painted, paint tone RAL (chassis color) • Removable aluminium drop sides, Suer make, height 600 mm, anodized version with stair steps, removable Kinngripp stanchions • Standard bed with welded 4 mm checkered steel floor, painted RAL (chassis color) • 6 retractable tie-down lashing rings per side, 2500 daN each, mounted in perforated rail for flexible arrangement • 4 chain lashing points, 6500 daN (2 at front and 2 at rear of body) • Robust front wall made of welded frame, welded 4 mm steel plate, 5 accessory hooks, front wall height approx. 1300 mm, steel painted, with 2 foldable lashing eyelets for tensioning straps, welded on • Cover panels, fenders made of aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified • 2 BROSSBOX toolboxes, aluminium checker plate (sandblasted, powder coated and painted), RAL tones to be specified; size and position depending on wheelbase and available space • 1 BROSSBOX toolbox between crane and front wall • Multifix stanchion sockets, double row as agreed, approx. 80 cm from front wall and rear Bsdpfsy Ei Rvox Ad Ajlg • Brackets (for support pads, crane plates) made of galvanized steel • Additional stabilizer installed under the chassis • Installation of underrun protection at the rear and the additional stabilizer, including hydraulic and electrical connections • Duomatic and red/yellow connectors at the front for semi-trailers and at the rear for trailers New crane, type FASSI F545 RA 2.27, infinitely rotating, fully assembled, installed and configured, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional equipment and crane accessories: • 5 crane support plates with brackets, arrangement according to production drawing • AWC (automatic rope length control) • Operating manual, maintenance manual and crane inspection book Lighting: • 2 integrated LED working lights in the front wall • 2 revolving lights on the FH roof • 2 strobe lights in the bonnet • 2 LEDs under the body at the rear, left and right, arrangement by agreement • 4 LED working lights, 2 left and 2 right under the body in the B