Used Guss Größe 500 Mm for sale (80,684)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) Gkedpfxjmhh Dho Afusc - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Gedpfxomkixws Afuokc According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: 7,350 mm Number of bays per rack row: 05 pcs. Number of levels plus floor level: 02 pcs. The scope of delivery includes: 06x pallet rack uprights, used Material color: grey Profile dimensions: 100 x 65 x 2.25 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x pallet rack traverse, used Material color: Ral 2004 orange Box profile: 80 x 50 mm Beam type: PNBH 0488 Bracket: 4 HK (hooks) Clear width: 1,350 mm 40x locking pin, used Version: completely galvanized For securing the side rails against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven ground 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Gjdpfxsrz Nf Ns Afuokc Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 90 mm, total width: 560 mm, total height: 75 mm, total length: 2,970 mm, conveying length: 2,970 mm, construction width: 560 mm, construction height: 75 mm, TAF article number: 1000003838 Manufacturer: unknown Year of manufacture: unknown Overall dimensions: approx. 2,970 x 560 x 75 mm (LxWxH) Cheek width: 560 mm Cheek height: 70 mm Conveyor length: 2,970 mm Conveyor width: 500 mm Roller type: Steel Rollers per axle: 1 piece Roller pitch: 90 mm Roller diameter: 50 mm Drive: Gravity Condition: Used / fully functional Gkjdpferaziwsx Afusc Function test: OK

Condition: repair required (used), Spare part for grinding machine, angle grinder, lathe tool grinder, tap and die grinder, milling cutter grinder, surface grinder, drill grinder Gksdpoivqmaefx Afuec -sold as a source of spare parts -Adjustment device: for grinding machine -Type: unfortunately without a type designation -Details: see photos -Dimensions: 580/400/H500 mm -Weight: 120 kg

Condition: good (used), vacuum furnace, chamber furnace -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C Gkedpfeif Sbiex Afusc -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control

Condition: good (used), Shelf upright: 2,300 mm x 1,500 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Godpfem Ezdqjx Afuekc Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 17.180 mm Number of bays / rack row: 06 pcs. á 2.700 mm Number of levels plus floor level: 02 pcs. Included in delivery: 07x pallet rack uprights, used material color frame: sendz. galvanized material color framework: blue profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 2.300 mm high 1.500 mm deep 24x pallet rack traverse, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 48x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 28x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Shelf upright: 3,100 mm x 1,500 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 17.180 mm Number of bays / rack row: 06 pcs. á 2.700 mm Number of levels plus floor level: 02 pcs. Included in delivery: 07x pallet rack uprights, used material color frame: sendz. galvanized material color framework: blue profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Godjm Eztfopfx Afuekc Base plates The stands are pre-assembled ( screwed truss ) 3.100 mm high 1.500 mm deep 24x pallet rack traverse, new Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 48x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 28x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 14x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: good (used), Shelf upright: 4,700 mm x 1,500 mm / Clear width: 2,700 mm Technical data of the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 14,340 mm Number of bays / rack row: 05 pcs. á 2.700 mm Number of levels plus floor level: 03 pcs. Included in delivery: 06x pallet rack uprights, used material color frame: sendz. galvanized Material color framework: blue Profile dim.: 140 x 80 x 2.25 mm Incl. cross and diagonal braces, Base plates The stands are pre-assembled ( screwed truss ) 4.700 mm high 1.500 mm deep 30x pallet rack truss, new Godpfx Afem Eztqeuskc Material color: Ral 2004 orange box profile: 130 x 50 mm type of cross beam: PNB 0413 S355MC agraffe: 4 HK (hooks) clear width: 2.700 mm max. load per truss pair 3.000 kg with evenly distributed load 60x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x shims, used execution: complete galvanized for levelling of the racks which are are placed on uneven ground 01x load plates with data of field and shelf loads, manufacturer and commission number Dimension: 297 x 210 x 2 mm

Condition: used, V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing Gjdpfx Ajm T Ahzsfuekc -V-belt pulley: pulley with 8 grooves -V-belt width: 17 mm -Receptacle: Ø 97/90 x 60 mm for taper clamping bush (Ø can be changed) -Dimensions: Ø 225 x 157 mm -Weight: 18kg

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 330 mm -Taper cone: Ø mm -Thread holder inside: M56 x 5 mm -Through hole: Ø 51 mm -Weight: 23 kg Gksdpfedfy E Asx Afusc

Condition: used, Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm Gkodpfx Aeb Uhpgefuec -Weight: 570 kg

Condition: used, Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 565 x 310 mm -Connection: Ø 500 mm -Material: sheet steel -Dimensions: 870/650/H650 mm -Weight: 38 kg Gkodpfecba Tvex Afujc

Condition: good (used), Bushing material, bushing material, bearing material Gkodocwdmkopfx Afuec -Inner diameter: 339 mm -Outer diameter: 422 mm -Length: 331 mm -Material: gunmetal -Quantity: 1x piece available -Weight: 142 kg

Condition: used, Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm Gkodpsdnuhiefx Afujc -Height: 175 mm -Plate thickness: 26 mm -with: support ribs -Weight: 90 kg

Condition: refurbished (used), Year of construction: 2025, Schaudt PF5 UB 1000-2500 mm Gksdpfsfg Tazex Afusc Grinding length: 1,000 / 1,500 / 2,000 / 2,500 mm Center height: 180 / 225 mm (more possible as an option) Workpiece weight: 350 / 500 / 800 kg (more possible as an option) Further options that can be freely selected: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control - Quick setup via GSN operator interface - Diatronic measuring system - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Center height adjustment - Dressing spindle for diamond form roller - Balancing and finish grinding sensor - Hydraulic clamping/releasing of the tailstock - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Suitable coolant/extraction system - Automation preparation - and much more We would also be happy to overhaul your existing grinding machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and others.

Condition: used, Sliding support, linear drive, clamping plate, unit carrier, milled surface, welding table, welding table -Spare part of: a Wotan table boring machine -compatible with: clamping plate ID 21339 Gkodped R Exgsfx Afujc -Width at the top: 80 mm -Width at the bottom: 270 mm -Length: 2200 mm -Height: 215 mm -Number: 2x available -Price: complete for both -Transport dimensions: 2200/600 / H300 mm -Weight: 556 kg

Condition: used, Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -Roller conveyor: with hydraulic drive -Roll width: 500 mm -Diameter roller: 50 mm -Center distance: 70 mm Gedsg N Tuzspfx Afuokc -Hydraulic motor: Danfoss type OMM 12.5 -Dimensions: 1200/700 / H180 mm -Weight: 41 kg

Condition: good (used), Here, we offer you a second-quality impact protection barrier for sale. The scope of delivery includes: 01x Impact protection barrier, second quality Material color: yellow/black/galvanized Overall height: 400 mm Overall depth: 180 mm Clear width: 2,500 mm Consisting of: 01x CS Sigma profile, second quality Material color: Sendzimir galvanized Profile dimensions: C 300 x 75 x 2 mm Length: 2,400 mm 02x L-shaped impact protection corners, new Material color: yellow/black According to DIN standard Overall height: 400 mm Leg length: 170 x 170 mm Material thickness: 5 mm Gkjdpfehpucrox Afuec Weight/piece: 6.10 kg 08x Screws: M12 08x Nuts: M12 16x U-washers: M12 The impact protection barrier is delivered completely pre-assembled. General information about the item: This item is only offered for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, clear span: 1,350 mm, total height: 2,500 mm, Current delivery time: approx. 10-15 working days Order goods Technical data for the shelf trolley: Shelving system: Kimer Number of levels: 05 pcs. The scope of delivery includes: 02x shelf uprights, new Material color: RAL 5003 sapphire blue Profile dimensions: 50 x 55 x 1.50 mm unassembled, incl. base plates Shelf depth: 400 mm Shelf height: 2,500 mm 10x shelf beams, new Material color: RAL 2004 orange Cross beam length: 1,350 mm 20x Kimer locking pins Material color: sendzimir galvanized 05x chipboard, used Thickness: 22 mm Width: 1,340 mm Gsdpjtxa N Ujfx Afuekc Depth: 395 mm Design: multi-part 10x depth bars, new Material color: sendzimir galvanized Shelf depth: approx. 400 mm 04x swivel castors, new swivel (360 degrees) Loadable up to 250 kg General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: new, machine/vehicle number: 190027001, Roller sorting table 2500 x 800 mm This device was designed for sorting a wide variety of fruit and fruits and vegetables. The rotating movement of the rollers during transportation of the goods, an apple, for example, can be inspected from every side to detect damaged areas. A light bar mounted above the rollers illuminates the working area. This allows the defective fruit to be immediately removed from the process. This is essential to achieve a high juice quality. Design of the appliance: The rotating plastic rollers are enclosed in a stainless steel housing, which is mounted on a height-adjustable frame with wheels. The appliance can be operated either manually or ideally with the VORAN large crate emptying system (GKE). Standard equipment: - Light bar - Adjustable speed - Height and angle adjustable - mobile Gjdstvfc Hepfx Afuokc Technical data: Processing capacity up to 3 000 kg/h Conveying speed 0.05-0.3 m/s Working height ~1000 mm Discharge width 500 mm Dispensing height ~800 mm Electrical connection 230V 50Hz (1-phase) Electrical power 0.55 kW Plug type F (=SCHUKO) Dimensions: Length 2 840 mm Width 1 080 mm Height (incl. light bar) 1 800 mm Weight 200 kg

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR600 Gedpfx Afsucp Uljujkc Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 9,720 mm Number of bays / row of shelves: 01 pcs. 1,800 mm each Number of levels plus floor level: 03 pcs. Technical data on volume: Pallet spaces per bay: 06 pcs. Pallet spaces per rack row: 30 pcs. Total pallet spaces: 30 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x pallet rack uprights, used Material color: sendzimir galvanized Profile dimensions: 120 x 100 mm Incl. cross and diagonal struts, base plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,050 mm deep 20x pallet rack beams, used Material color: RAL 5010 gentian blue INP profile: 80 x 42 mm Beam type: TRV1-180-08-l Agraffe: 4 HK (hooks) Clear width: approx. 1,800 mm Max. load per truss pair 2,800 kg, with evenly distributed load 40x locking pin, used Material color: sendzimir galvanized To secure the longitudinal beams against unintentional lifting out 24x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transportation or shipment of this item is associated with additional additional costs, which can be requested separately depending on the or scope of delivery can be requested from us.

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Gkjdpfx Asidchcjfuec Included in the scope of supply: 1x CS Sigma profile, used Material color: sendzimir galvanized Overall length: approx. 5,500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: good (used), Technical specifications for the pallet rack crossbeam: Rack system: Dexion Type: Speedlock P90 Included in delivery: 1x pallet rack crossbeam, used Material color: Sendzimir galvanized Box profile: 130 x 50 mm Crossbeam type: SLB Clamp: 5 HK Clear width: 3,500 mm Max. load per pair of crossbeams: 2,500 kg, with evenly distributed load 2x locking pins, used Design: fully galvanized To secure the longitudinal beams against accidental lifting Gkjdswa Iiaspfx Afujc Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: refurbished (used), functionality: fully functional, We offer 4 Schlick turbines – 320 mm, including 7.5 kW motors. Turbine model: Schlick ROTO-JET RB500 5.2/4/7.5 Turbine type: 5.2 Abrasive flow rate: 140 kg/min. Abrasive outlet velocity: 70 m/sec. Turbines have undergone a complete overhaul and original spare parts were used. Blasting machine, shot blasting, sandblasting equipment… Godpfxovphf Uj Afuekc PRICE PER UNIT: 2300 EUR.