Used H+K Quadroplan for sale (72,558)

Condition: excellent (used), Year of construction: 2017, operating hours: 400 h, functionality: fully functional, Equipment: compressor, documentation/manual, High-end (!) Austrian Brewery, newly purchased in 2017 directly from the owner. It has been used less than 100 times ever since because it is positioned at a remote location away from the main brewery. It has been maintained very well, ready for inspection. Ideally for brew-pubs. It is 5HL machine but can do 2 brews simultaneously, so effectively it can be considered a 10HL machine. It has 4 Uni-tanks of 12 HL and all the necessary equipment, such as cooling, to make it a turn-key brew installation of a premium quality. Also all necessary hoses plus a mobile pump for CIP of the Unitanks, etc. Original documentation available, in German, showing that all equipment was purchased at the Labu factory. This whole set would currently cost approx. 240.000€ (ex VAT, ex works). Delivery possible per direct after dismantling. We could provide a proper instruction / training by one of our senior brewers. Current asking price is approx. 135K€, ex VAT ex work but including instruction. The brewery is located in the Amsterdam area, the Netherlands Ndedpfxjzz Rlws Agreb

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,137 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, fuel type: gas, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion engine forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 80 - 100% Description: Delivery includes a new FEM 4.004 inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We would be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible, even if you do not purchase a device from us. The stated operating hours were recorded at the time the listing was created. Subject to prior sale, changes and errors. Side shifter, Nodpfx Agez Ecvgsrodb pre-installed side shifter 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light, seat heating.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 930853, WAB Turbula T2C from 1993. The mixer is in very good condition and was serviced by WAB in August 2026. During the service, the circular belts, flat belts, both tensioning pulleys, and the rubber tensioners were replaced with new ones. In addition, the following items are included as new: - 1 set of black rubber tensioners Ndodpfez Dx N Tsx Agrob - 2 sets of red rubber tensioners (for heavier loads) - 1 mixing container, 1 liter - 1 mixing container, 2 liters Furthermore, the original operating manual from WAB and the maintenance log from 08/26 are included.

Year of construction: 2012, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 120501, High-frequency generator, 70 kW, frequency range: 120 - 450 kHz, including energy controller, current controller, and bus interface. Ndsdpfxszxwx Eo Agrsb Ground fault monitoring, adjustable.

Condition: excellent (used), Year of construction: 2016, Seydelmann K126 bowl cutter with tote bin loader. In almost new condition having only been used for 3,800 hours. Can be sold with full safety cage guarding system. Nodpfx Asvthdfjgrjdb

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 21239, pressing force: 38 t, type of input current: three-phase, input voltage: 400 V, input current: 32 A, overall weight: 15,000 kg, oil tank capacity: 80 l, empty load weight: 5,580 kg, operating pressure: 200 bar, input frequency: 50 Hz, Equipment: documentation/manual, Avermann AVOS MPC 20 + HKV – 20 m³ | Tilting mechanism 240/660/1100 L | Cable & hook attachment | Discharge flap For sale: Avermann AVOS MPC 20 P/A/L/R + HKV compaction container, built in 2016, with a capacity of 20 m³. This robust Avermann compaction container is equipped with an integrated hydraulic lifting and tilting mechanism, making it particularly suitable for locations where roll-on-roll-off containers need to be emptied directly into the container. The tilting mechanism features a hydraulic comb attachment for 240-liter containers and a DIN attachment for 660- and 1,100-liter roll-on-roll-off containers with a flat lid. This makes the machine versatile and suitable for various types of waste containers. In addition, the compaction container is suitable for both cable and hook attachments. At the rear, the machine is equipped with a discharge flap instead of a traditional discharge door, making this version particularly interesting for certain waste streams and applications. Technical specifications: Brand: Avermann Type: AVOS MPC 20 P/A/L/R + HKV Year of construction: 2016 Serial number: 21239 Capacity: 20 m³ Power supply: 3 x 400 V + N + PE, 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP55 Maximum working pressure: 200 bar Nedjz Ergzepfx Agrjdb Own weight: approx. 5,580 kg Permissible total weight: 15,000 kg Integrated hydraulic lifting and tilting mechanism Hydraulic comb attachment for 240-liter containers DIN attachment for 660- and 1,100-liter roll-on-roll-off containers Cable and hook attachments Equipped with a discharge flap Condition: The machine is currently in used condition and shows visible signs of wear and tear, consistent with its age and use. The compaction container can be delivered in its current state, but if desired, it can also be fully overhauled, sandblasted, and repainted in a color of your choice. Price in current condition: €9,000 Price fully overhauled, sandblasted, and repainted: €17,500 Due to the combination of the 20 m³ capacity, integrated tilting mechanism, and flexible container attachments, this is a very practical machine for, among other applications, industry, logistics, manufacturing companies, recycling, and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information or technical questions. Keywords: Avermann, AVOS MPC20, MPC 20, compaction container, 20m3, waste compactor, container compactor, HKV, lifting tilting mechanism, tilting mechanism, 240 liter, 660 liter, 1100 liter, DIN attachment, comb attachment, hook attachment, cable attachment, discharge flap, waste compaction, recycling.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, total width: 7,500 mm, total length: 35,000 mm, overall weight: 32,000 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Lisec combination line for jumbo-sized sheets with automatic storage and loading table: Njdpfjz Abahjx Agredb Configuration: LBR - ATF - GFB RE S - LKT - BHK

Condition: good (used), refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, refrigeration machine, refrigeration unit -Manufacturer: VEB, refrigeration compressor cooling unit complete -Type: K 1.6 H 200.2 / DK1.6H200.2-2.7 -Power: 290 W -Voltage: 220V Ndsdsupbdaopfx Agrjb rating pressure: 15.2 bar -Technical data: see photos type plate -Total dimensions: 480/300/H245 mm -Weight: 22 kg

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-261-20-6827, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Type KDF 220 Profiline Year of manufacture: 2012 Units controlled from display Jointing unit: 2 x 2.2 kW Gluing unit A6 End trimming saw unit: 2 x 0.18 kW Flush milling unit: 2 x 0.27 kW Profile milling unit: 2 x 0.35 kW WD 40 Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-60 mm Feed speed: 11 m/min Total power: 16 kW Length: 4150 mm Nodpfxeyy S Ade Agrodb

Condition: used, Year of construction: 2007, Filtration with briquette press 4kW press group Briquets 120/45mm 400V Ndjdpfjzm Uw Iox Agrob

Condition: used, mileage: 150,351 km, power: 100 kW (135.96 HP), first registration: 01/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency/federal police. Equipped as a bus (group transport vehicle) with a raised roof, full air conditioning, auxiliary heater, ABS, driver airbag, and a differential lock on the rear axle, as well as a retarder – an electrically powered, wear-free eddy current brake for speed adjustment. The body only has minor surface rust on the lower edges of the sills – no holes are present. There is a slight bulge on the rear wheel arch, but this is not relevant for the TÜV (technical inspection). Ndsdpfx Aezmqnpjgrjb Technically, this Vario is in excellent condition and does not require any immediate repairs – it has been consistently maintained according to the service schedule. We have already replaced both starter batteries, and before the sale, we will replace the windshield with a real glass one, making it suitable for private registration. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. The air conditioning and auxiliary heater are functional and very effective: 1) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2) The auxiliary heater is a hot water circulation heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to documentation: 120 km/h. A total of 11 seats, with the seats in the passenger compartment designed as reclining armchairs – with adjustable backrests and armrests. Furthermore, the left inner seats can be moved forward by approximately 10 cm on the console for more freedom of movement. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH). For an additional charge of €750, we can carry out a technical modification to convert it into a camper van by removing some seats. Due to space constraints, a maximum of 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. +++Errors, changes, and prior sale are subject to change.

Condition: used, Year of construction: 2007, liter capacity 100 / 154 / 52 l Control OP77A Siemens tank capacity 2800 l total power requirement 46 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,7 x 2,5 x 3,56 m Suction belt filter HSF 150 E / was operated on a grinding machine with OIL Nedevxwq Sopfx Agrodb Machine supply pump 1 100L 2.5 bar Machine supply pump 2 154L 20 bar / 52L 60 bar Cooling unit OED RK-V-2 with 25kW cooling capacity Tank volume 2800L Clean tank 1050L capacity Dirt tank 1750L capacity Filter capacity min. 375L / max. 600L for emulsion Filter capacity max. 300L for oil

Condition: used, Year of construction: 2002, operating hours: 11,000 h, Equipment: all wheel drive, * O & K MH Plus wheeled excavator with approx. 11,000 operating hours - first commissioned in 2002 * With articulated system - quick coupler - hammer line and 5 buckets in total * Transport length : 7,900 mm - Total width : 2,500 mm - Total height : 3,100 mm * Total weight : 14.300 kg - Tires 10 R 20 - Vehicle available immediately - * Regularly serviced - German vehicle - From 1st hand - * Engine manufacturer : Deutz Type : F4L913 with 78 KW / 106 PS * PICK-UP PRICE - TAKE IT AS IS - WITHOUT TÜV - WITHOUT LICENSE PLATE - * For viewing please make an appointment * Contact person : Mr. Andreas Vogel Ndsdpfx Agsxgldlsrob * The information provided on the Internet is a non-binding description. * They do not represent warranted characteristics. * The seller is not liable for typing or data transmission errors. * Subject to alterations, errors and prior sale.

Condition: like new (used), Year of construction: 2008, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade: We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year: 2008 Machine No.: 61011790 Operating Hours: 24,600 h Injection Unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nodpfx Aoz A Iarogredb Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping Unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen distance: 950 mm Minimum tool mounting height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Wedge shoe machine mounting -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector area protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in sequence -Chrome-plated tie bars for the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control 1-way on the non-operator side. -Water manifold 8-way -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5. -Ejection of the cooled nozzle tip -Fan on the control cabinet -Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor) -1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version. -Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of supply. Free loading ex our warehouse in Hanover - worldwide delivery possible on request. Inspection under power possible by arrangement.

Condition: good (used), functionality: fully functional, overall weight: 85 kg, SUCTION UNIT PLYMOVENT EMK 1602-H Manufacturer: PLYMOVENT Designation: EMK 1602-H Weight: approx. 85 kg Very good condition (see photos) Large castor wheels, 2 of which can be locked (simply operate with foot) Dimensions: Ndodpjt Dkytjfx Agrob Height 107 cm width 90 cm Depth 1100 cm Offer consists of 1 piece EMK1602-H General information: We are offering items here from various company liquidations, which we describe as well as possible and provide informative photos. Further information about the item cannot be provided. We offer the opportunity to view items on Tuesdays and Thursdays between 9 am and 4 pm by telephone appointment. If required, the item can be taken away immediately. Unless expressly described, this offer is for second-hand goods. Items have been visually inspected and are in good condition. Please note the photos Functionality performed - result ok. All offers ex stock 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. all dimensions are approximate Photos similar

Condition: used, Year of construction: 1993, operating hours: 6,740 h, load capacity: 4,000 kg, lifting height: 4,400 mm, fuel type: diesel, construction height: 2,970 mm, gearing type: automatic, Equipment: cabin, H 40 D front loader with full cab own forklift truck from GLW various repairs, always serviced Total operating hours 6,740 h Lifting height 4.4m Ndodeurpwtspfx Agrsb Total height 2.97 m Subject to errors and prior sale. Price ex warehouse Riederich.

Condition: good (used), Year of construction: 2012, Used press brake from Knuth Capacity: 4100 x 250 tons Cybelec DNC 880S CNC control Y1, Y2, X and R axis CNC Hydraulic crowning Amada / Euro top clamp 1 set of complete tooling Ndsdpozz Rz Ssfx Agrjb

Condition: used, mileage: 580 km, power: 66 kW (89.73 HP), first registration: 05/1962, fuel type: diesel, number of seats: 22, gearing type: mechanical, color: beige, Year of construction: 1962, Available in multiple colors (yellow/red/green), built between 1957 and 1964. We also have 8 restoration projects ready to start immediately. Features: 8 sleeping seats or 20 seating capacity * Double tour guide seat * Large club lounge for 8-seat configuration Njdpfx Agezyx Nzerjdb Length: 6,650 mm Width: 2,250 mm Permissible total weight: 6,200 kg Complete restoration Henschel engine Steering wheel manual transmission Roof luggage rack German historic (H) registration, passenger coach - Rental for your event possible. Europe-wide delivery available with our vehicle transporters. We have a wide selection of classic Setra buses: S6, S7, S9 to S14, Mercedes O 319 and O 3500, Saurer bonnet buses. We make shipment worldwide. Net price: 165,000.00 Euro

Condition: used, Year of construction: 2008, Deckel Maho DMC 55H duoBlock Horizontal Machining Center – Copy" Horizontal Machining Center Deckel Maho Type / Model: DMC 55 H DuoBlock Year of Construction: 2008 Condition: Used Program Runtime: approx. 61,600 h Spindle Runtime: approx. 44,700 h Technical Data Travel ranges X / Y / Z axes: 560 mm / 600 mm / 600 mm Rapid traverse rate (X/Y/Z): 40 m/min Work table & Pallet Changer (APC) Number of pallets: 2-position pallet changer Pallet size: 400 mm x 400 mm Max. workpiece weight: 500 kg Max. workpiece height: 850 mm B-axis (rotary table): 360° (designed as an NC rotary table, usually with 0.001° indexing) Main spindle: 12,000 1/min; HSK 63; approx. 38 kW Tool Changer (ATC) Tool magazine: 40 magazine positions Tool holder: HSK-A63 Max. tool diameter: 80 mm (up to 160 mm with free neighboring positions) Max. tool length: 330 mm Electrical Data Power connection: 400V 3/N, PE 50Hz Power consumption: 58 kVA Inrush current: 84 A Max. fuse rating: 100 A DC control voltage: 24 VDC Auxiliary voltage: 230 VAC Dimensions, Weight & Control Machine weight: approx. 11,000 kg to 13,000 kg (depending on magazine size and chip conveyor) Footprint (L x W x H): approx. 5.0 x 3.0 x 2.8 m (pure space requirement without peripherals) Control system: Siemens Sinumerik 840D Equipment NC rotary table Tool measurement system BLUM Mist and fume extractor IIFE-2000 Hydraulic clamping system Proportional amplifier Handwheel BHG Signal light Coolant system 980l Coolant nozzle Rotoclear Chip conveyor Master probe OMP60 Operating mode 4 Njdpfozzc Evex Agrsdb Quotation item: Transport costs in a separate offer.

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision Ndedszkbn Ujpfx Agreb - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm Nodpfxsy E Np Se Agrodb y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: excellent (used), Year of construction: 2010, Model Amada HFE M2 103t x 3110 3m, 8 axis Press Brake Year 2010 Very low hours Ndedpezb Eg Rjfx Agreb Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Feissler machine mounted Laser guards ,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: good (used), Year of construction: 1997, functionality: unexamined, We offer this used Sigrist-Müller FKS 450-1HNFE sharpening machine, year of construction 1997. Manufacturer: Sigrist & Müller AG Machine type: FKS 450-1HNFE Serial number: 1468 Ndsdpszzyftsfx Agrob Year of manufacture: 1997 year Country of origin: Switzerland The machine is in good condition but has not been used for several years. This machine is CNC controlled and is sold complete with with the guards and accessories shown on the pictures. Please make a reasonable offer per e-mail.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Nodpfjxf E Twex Agrsdb Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2004, Spraying machine Venjakob VEN SPRAY-K All pictures only for example - Producer Venjakob - Year of construction 2004 - Current condition: not refurbished - Offer price for refurbished condition - Working width 800 mm (1000) mm - Operating side, right - Duo gun drive system - Dry filter system 4.000 m³/Std. - Diameter exhaust air pipe 400 mm - Transport belttransport System - Feed speed adjustable 3 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system LS 1 - Number of installed lacquer circles 1 Stk. - Airless spraying system 4 Stk. Krautzberger KAA 1300 - Number of lacquer pumps 1 Stk. - Producer lacquer pump Wagner 35-70 - Suitably for solvent based lacquer - Suitably for water based lacquer - Total connection power 7 kW, Stromaufnahme 17 A , Absicherung 35 A - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. Ndodpfjzv Tg Hex Agrob We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!