Used H & H (Hardo) Th 1300-V60 Pu Bv for sale (59,440)

Condition: ready for operation (used), Bosch PU 401 servo positioning unit. Used, in good condition, 100% functional. Pedsi D Ubwopfx Adwepw

Condition: new, SEW Eurodrive R17F DRS71M4 / TH gearbox motor, serial number: 01.1736146301.0006.11, unused, 100% functional, scope of delivery as shown in the photos. Ppedpfx Aei D N Rujdwew

Condition: ready for operation (used), Bosch PU 401 servo-positioning unit. Used, in good condition, 100% functional. Pedpfxoi D Ubze Adwepw

Condition: ready for operation (used), SEW Eurodrive S62DT100LS-4BM/HR/TH/Z geared motor with brake SN: 010259205.9.03.03021,used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Pedpfx Adjudqtrjwspw

Condition: used, IKA EURO ST-D with 2 Paddles and H-Stand Podpfx Aszh Rhrodwspw Reliable IKA EURO ST-D overhead stirrer, offered complete with 2 stirring paddles and an H-stand. Ideal for laboratory mixing applications that require stable and consistent stirring performance. The unit is supplied with all the essential accessories needed for immediate use. Included: IKA EURO ST-D overhead stirrer 2 stirring paddles H-stand Suitable for: General laboratory mixing Research and development Chemical and pharmaceutical lab work Condition: Used Availability: Ready for immediate delivery

Condition: used, mileage: 467,100 km, power: 260 kW (353.50 HP), first registration: 01/2016, fuel type: diesel, number of seats: 60, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1168 * S 516 MD * Retarder * French inspection certificate is available. Ppsdpfx Ajxwr Apodwsw * Currently fitted with 58 seats (no reclining seats) --> therefore, the number of seats can be increased. * An additional row of seats is included separately, allowing for 60 seats. * The following repairs were carried out at EVOBUS in June 2026: * Retarder replaced * Retarder control unit replaced * Exhaust gas recirculation valve replaced * Haldex separator replaced * 2 x V-belts replaced * Air reservoir with drain replaced * Oil separator replaced * Cost: 8,500 EUR / net * In July 2026: Air conditioning service performed * Side matrix (without control unit) * Interior route display * Seats can be adjusted to face backwards * LIFT * Lifting mechanism - trunk lid on the right side * Storage compartments * Convector heater * Auxiliary heater * Air conditioning * Rear entrance * No toilet, no refrigerator. * Wheelchair-accessible bus * The customer is obliged to independently verify the condition and equipment of the goods/vehicle! * etc. * Vehicle may be in operation / mileage and condition may vary. * All information is subject to change without notice. * We reserve the right to sell the vehicle in the meantime. * We refer to our general terms and conditions.

Condition: used, Saw blade Ø: 1310 mm Psdebzg R Tspfx Adwspw round 440 mm square 400 mm flat 800 x 290 mm 60° 590/750 x 300 mm 45° 460/600 x 300 mm 30° 420 x 270 mm 20° 260 x 260 mm Dimensions 2870+380 x 1320 x 2700 mm (LxBxH) weight circa 7500 kg

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical data: - Working range X: 3,740 mm - Working range Y: 1,570 mm - Working range Z: 350 mm - 4th axis: present - 5th axis: 5-axis spindle, motor 12 kW - with additional locking of the C axis - Tool changer positions: 24 with disc changer; 10 in the machine column on the left Ppodszlbp Uopfx Adwjw - Vertical drilling spindles: 12 - Machine table: console table - Automatic table positioning: present - 6 workpiece supports type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining fields for pendulum operation - with automatic central lubrication - with mobile control desk with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control unit - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm Ppjdozlbpbopfx Adwew max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: good (used), saw blade diameter: 1,310 mm, Saw blade diameter: 1310 mm Ppjdpfx Adjzld Uajwsw Cutting diameter: 440 mm Machine weight: approx. 7.5 tons

Condition: new, functionality: fully functional, power: 280 kW (380.69 HP), fuel type: electric, color: other, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE TECHNICAL SPECIFICATIONS: -Production Capacity: 200-450 Tons Per Hour Pjdpfx Adjzhi T Hewopw -Crusher Type & Size: Turbo Impact Crusher – 1200x1200mm -Maximum Feeding Size: 700mm -Total Motor Power: 280 kW MIC-120 is a combination of: • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2018, Koppelmodul / Couple Box Heidelberg TH-TF-THBaujahr / Year 2018 - Serial-No. 0-03679 Koppelmodul für / Couple Box for Heidelberg TH-TF-TH MCT - DCT 500 - MCT Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Podpfx Ajl I Nlmodwepw

Condition: used, Year of construction: 2010, Koppelmodul / Couple Box Heidelberg TH-TD-THBaujahr / Year 2010 - Serial-No. 0-02178 Pedpfx Aelgz U Dodwspw Koppelmodul für / Couple Box for Heidelberg TH-TD-TH Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, functionality: fully functional, operating pressure: 150 bar, empty load weight: 198 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 140 °C, KRANZLE THERM 1017 TR TECHNICAL DATA: Model: KRANZLE THERM 1017 TR Ppjdsy R Tfhopfx Adwew Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 1000 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 5.5 Weight with accessories (kg): 198 Fuel tank capacity (l): 35 Dimensions (L x W x H) (mm): 1050 x 800 x 1300 KRANZLE THERM 1017 TR WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick coupler) Spray lance: KRANZLE (quick coupler) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. Integrated pressure hose reel 20m professional-grade pressure hose WHY CHOOSE THE KRANZLE THERM 1017 TR? The THERM 1017 TR is ideal for factories, workplaces, and industrial facilities. It is also successfully used by large and small transport companies, automotive repair shops, and in agriculture. It is also suitable for private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the 1017 TR model suitable for use in a wide range of industries. Additional handles allow for transporting the unit with additional accessories. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose, a reel, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. KRANZLE THERM 1017 TR RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Additional handles allow for transporting the device with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard equipment includes a high-pressure gun with lance, a 20m high-pressure hose reel, and a power nozzle. The device also features a quick-release attachment system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: used, Absaugarm aus Metallrohr und wird für das Punktschweißen, Laboranwendungen und die Nebelabsaugung Ventilatoren der FUA Serie können als Direktmontagelüfter für Absaugarme Psdpfoyt Iadsx Adwopw Suction Arm is ideal for grinding, polishing and other types of high-dusting Operations Absaugung - Ventilator / Suction - Fan Plymovent MMH-100-15 - FUA-1300 Baujahr / Year 2007 - Serial-No. 7402 Einsatzmöglichkeiten: Punktschweißen / Spot welding Schleifen und Polieren / Grinding and polishing Laboranwendungen / Laboratory Applikation Nebelabsaugung / Mist collection Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, power: 349 kW (474.51 HP), first registration: 10/2025, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: fridge, = Additional options and accessories = - Leaf suspension = Notes = Fuel tank: 680 litres Air conditioning Cab air suspension Roof spoiler Refrigerator Bluetooth DAB radio = Further information = Transmission: 16-speed manual Tyre size: 315/80R22.5 Suspension: leaf suspension Front axle: steered Pedpfxow N Rupe Adwspw Gross vehicle weight: 32,000 kg

Condition: new, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, overall weight: 206 kg, warranty duration: 24 months, temperature: 155 °C, Technical specifications: Current type (Ph/V/Hz): 3 / 400 / 50 Flow rate (l/h): 600 - 1300 Working pressure (bar): 30 - 200 Temperature (°C): 80 - max. 155 Full load heating oil or gas consumption (kg/h): 9.5 Eco!efficiency heating oil consumption (kg/h): 7.6 Connected load (kW): 9.5 Connection cable (m): 5 Fuel tank (l): 25 Weight with accessories (kg): 206 Dimensions (L × W × H) (mm): 1330 x 750 x 1060 Scope of delivery: Hand spray gun: EASY!Force Advanced High-pressure hose length: 10 m High-pressure hose type: Longlife High-pressure hose specifications: DN 8, 400 bar Spray lance: 1050 mm Power nozzle Servo Control Features: Pressure shut-off Option for dual-spray lance operation Pole reversible plug (3-pole) Soft damping system (SDS) 2 detergent tanks Dry-run protection Operational reliability: An easily accessible water filter protects the pump from particles in the water. Safety valves, low-water protection, and fuel safety devices ensure the machine's availability. The soft damping system (SDS) compensates for vibrations and pressure peaks in the high-pressure system. Accessory storage directly on the machine: All accessories can be stored directly on the machine. There are two hooks for the suction hose and power cable. Spacious storage compartment, e.g., for detergent, gloves, or tools. Detergent dosing: Easy switching between detergent tanks 1 and 2. Precise detergent dosing with rinse function. Mobility concept: Jogger-style design with large, rubber-tired wheels and a swivel caster. Integrated tipping tray for effortless transport over steps. Psdpjwglr Sofx Adwepw Push handles for easy transport and maneuverability. Simple controls: One switch for all device functions.

Condition: excellent (used), Year of construction: 2018, Control: Siemens 828D Travel X/Y/Z: 1300 x 710 x 610 mm Table size: 1450 x 610 mm Spindle speed: 12,000 rpm Ppedpfx Asywpfwodwow Tool magazine for 30 tools, SK 40 Through-spindle coolant 3D probing system

Condition: new, Year of construction: 2021, Storage location number: 100317030 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Demonstration unit Ppjdpfjzkz Uhox Adwow

Condition: new, functionality: fully functional, power: 4.2 kW (5.71 HP), fuel type: diesel, color: yellow, operation weight: 181 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 3050 H Vibratory Plate NEW Wacker Neuson DPU 3050 H Vibratory Plate – NEW | 30 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B30 with 4.2 kW Item Number: 5000610039 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 3050 H Condition: NEW Operating Weight: 181 kg Frequency: 90 Hz Centrifugal Force: 30 kN Working Width: 500 mm Engine: Hatz 1B30 Diesel Engine Engine Power: 4.2 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium-Heavy Compaction Surface Performance: approx. 624 m²/h Highlights & Features: - Powerful diesel vibratory plate for demanding compaction work - Robust construction – ideal for daily jobsite use - 500 mm working width – high surfacing performance in a compact design - Ergonomic guide handle – low vibration & comfortable - Reliable Hatz diesel engine – high performance & efficient - Made by Wacker Neuson – proven quality & immediately available Fields of Application: ✓ Paving and medium-sized areas ✓ Landscaping & gardening ✓ Municipal applications & construction companies ✓ Fiber optic & cable installation ✓ Compaction jobs on small to medium-sized sites Options: Surcharges only available in conjunction with the machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system to record operating data such as operating hours, maintenance intervals, and emissions. The data is transmitted wirelessly to the Wacker Neuson app, where it is clearly displayed. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery Germany-wide & internationally on request Prices ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All details subject to change. Errors and interim sale reserved. Prices excluding VAT Ppedpfx Aszh Eb Tsdwew Further models and sizes available! Also DPU 3750 etc. in stock ➡️ New & used machines, accessories & spare parts Buy a Wacker Neuson vibratory plate | DPU 3050 H NEW | Diesel Vibratory Plate 30 kN | Vibratory Compactor 500 mm Working Width | Hatz Engine | Wacker Neuson Compaction Equipment | Vibratory Plate for Paving Your reliable partner for compaction equipment & construction machinery: Claudio Macagnino Construction Equipment & Commercial Vehicle Trading Ltd. ➡️ Enquire now & secure immediately available new equipment! Virtual machine inspections via video call available on request.

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 166 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2550 H Vibratory Plate – NEW | 25 kN Centrifugal Force | 500 mm Working Width | Hatz Diesel Engine 1B20 with 3.1 kW Item No.: 5000610036 Technical Specifications: Manufacturer: Wacker Neuson Model: DPU 2550 H Condition: NEW Operating Weight: 166 kg Frequency: 90 Hz Centrifugal Force: 25 kN Working Width: 500 mm Engine: Hatz 1B20 Diesel Engine Engine Power: 3.1 kW Fuel: Diesel Starting System: Recoil Start Compaction Class: Medium-heavy duty Surface Capacity: approx. 624 m²/h Highlights & Features: - Compact diesel vibratory plate for versatile applications - Robust construction – ideal for daily site use - 500 mm working width – high surface capacity in a compact design Ppedpfx Aozh D R Tjdwow - Ergonomic guide bar – low-vibration & comfortable - Reliable Hatz diesel engine – powerful & efficient - Made by Wacker Neuson – proven quality & immediately available Fields of Application: ✓ Paving construction & medium-sized surface areas ✓ Landscaping & gardening ✓ Municipal works & construction companies ✓ Fiber optic & cable installation ✓ Compaction tasks on small to mid-sized sites Options: Available at extra cost only in combination with machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as operating hours, maintenance intervals, and emissions. Data is transmitted wirelessly to the Wacker Neuson app and clearly displayed. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery throughout Germany & internationally upon request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Subject to prior sale and errors. Prices plus VAT / VAT excluded Further models and sizes available! Also in stock: DPU 3050, DPU 3750 and more ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2550 H NEW | Diesel Vibratory Plate 25 kN | 500 mm Vibratory Plate | Hatz Engine | Wacker Neuson Compaction Equipment | Vibratory Plate for Paving Construction Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Contact us now & secure immediately available new equipment! Upon request, we are happy to offer you a virtual machine inspection via video call.

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), fuel type: diesel, color: yellow, operation weight: 160 kg, Year of construction: 2026, Equipment: UVV, Wacker Neuson DPU 2540 H Vibratory Plate Compactor – NEW Wacker Neuson DPU 2540 H Vibratory Plate Compactor – NEW | 25 kN centrifugal force | 400 mm working width | Hatz diesel engine 1B20 with 3.1 kW Item number: 5000610035 Technical specifications: Manufacturer: Wacker Neuson Model: DPU 2540 H Condition: NEW Operating weight: 160 kg Pjdpfxezh D Nco Adwepw Frequency: 90 Hz Centrifugal force: 25 kN Working width: 400 mm Engine: Hatz 1B20 diesel engine Engine output: 3.1 kW Fuel: Diesel Start system: Recoil starter Compaction class: Medium-duty Area performance: approx. 624 m²/h Highlights & Equipment: - Compact diesel vibratory plate, suitable for a wide variety of applications - Robust construction – ideal for daily use on construction sites - 400 mm working width – for precise compaction even in tight spaces - Ergonomic guide bar – low vibration & comfortable operation - Reliable Hatz diesel engine – powerful & fuel-efficient - Made by Wacker Neuson – proven quality & immediately available Applications: ✓ Paving and medium-size surfaces ✓ Landscaping and gardening ✓ Municipal projects & construction companies ✓ Fiber optic & cable installation ✓ Compaction tasks on small to mid-sized construction sites Options: Surcharge only in combination with machine: - EquipTrack Beacon: €49.00 ➡️ EquipTrack is a Bluetooth-based system for recording operating data such as run hours, service intervals, and emissions. Data is transmitted wirelessly to the Wacker Neuson app and clearly displayed there. Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Nationwide & international delivery on request Pricing ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information is provided without guarantee. Subject to errors and prior sale. Prices excluding VAT Further models and sizes available! Also in stock: DPU 2550, DPU 3050, DPU 3750 etc. ➡️ New & used machines, accessories & spare parts Buy Wacker Neuson Vibratory Plate | DPU 2540 H NEW | Diesel Compactor 25 kN | Vibratory Plate 400 mm working width | Hatz engine | Wacker Neuson Compaction Technology | Plate Compactor for Paving Applications Your reliable partner for compaction technology & construction equipment: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Enquire now & secure immediately available new equipment! Virtual viewing of the machine via video call available on request.

Condition: ready for operation (used), KSB ETABLOC-G 50-160/114 ID: 48862505 pump with QU FS 90S4A-60 H motor, serial number: 163752M, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ppjdpezh Sc Rsfx Adwsw

Condition: like new (used), Year of construction: 2020, operating hours: 395 h, functionality: fully functional, machine/vehicle number: 980-416, total width: 2,098 mm, total height: 1,405 mm, total length: 2,316 mm, briquette diameter: 80 mm, overall weight: 1,800 kg, type of input current: three-phase, input current: 28 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 250 l, Equipment: cooling unit, emergency stop, WEIMA TH 814 Briquette Press! Top condition! Like new! Available immediately! Private sale (no VAT can be declared)! Operating hours: only approx. 400 hours The WEIMA TH 814 is a robust hydraulic briquetting press for industrial applications. It processes wood and biomass waste into highly compressed cylindrical briquettes with a diameter of 80 mm. The machine is designed for reliable continuous operation and offers high energy efficiency as well as a compact design for easy integration into existing plants. Model: WEIMA TH 814 Briquette diameter: 80 mm Applications: Wood, biomass, paper, plastic waste Year of manufacture: 2020 Throughput rate: up to approx. 180 kg/h Hydraulic motor: 11 kW Hydraulic system: automatic operation, suitable for continuous duty Weight: approx. 1,800 kg Dimensions (L × W × H): approx. 2,098 × 2,316 × 1,405 mm Hydraulic oil capacity: approx. 250 liters Feed hopper: approx. 1,400 × 1,400 mm Briquette length is adjustable and can be regulated via the feed auger's speed. Depending on the feed material rate into the pressing chamber, the briquette length will vary. The control is managed by a time relay in the control cabinet, which determines the running time of the feed auger's motor. The machine has seen little use and is in very well-maintained condition. Sale due to underutilization. Trial run on-site possible. Loading on-site possible. Original operating manual (Hungarian) available. A German version can be provided by the supplier if needed. Pjdpfx Aoy Af T Iodwopw The integrated hydraulic system is equipped with automatic oil preheating and oil-cooling function. This ensures an optimal temperature range of the hydraulic oil, even at low ambient temperatures or during continuous operation. This allows reliable 24/7 continuous operation of the machine. The price is set fairly considering the condition and very low operating hours. Inspections can be arranged at short notice by appointment. If interested, I look forward to your message.

Condition: used, Year of construction: 2021, operating hours: 1,165 h, load capacity: 6,000 kg, fuel type: diesel, construction height: 10,000 mm, gearing type: automatic, Equipment: cabin, head guard, * Magni TH 6.10-D7/D telescopic handler * Year of manufacture: 2021 * Operating hours: 1,165 h * Radio remote control * Max. lifting capacity: 6,000 kg * Lifting height: 10 m * 4x4x4 / all-wheel drive / all-wheel steering * Hydraulic connections available * Rear-view camera * More photos and videos via Whatsapp * Information provided without guarantee, subject to prior sale. Ppedpfx Adeyq Dbljwew