Used Haas Haas Vf-3 for sale (63,165)

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Iajdpfx Aex Eu Uysnwju

Condition: ready for operation (used), Bosch UVF 100M/4B-12S 920/3507813-3 SN 104-914339, used, normal signs of use, 100% functional, scope of delivery as per photos Iodpfx Anoi D Hg Uowjau

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 001/003, used, normal signs of use, 100% functional, scope of delivery as per photos Iodpsxaigkofx Anweau

Condition: ready for operation (used), Wagner tool system B16-VF tangential tool thread roller head 002/003, used, normal signs of use, 100% functional, scope of delivery as per photos Iasdpfx Ansxaigqjwju

Condition: ready for operation (used), Electro Adda FV71FE-8/2 3~ motor with Bonifiglioli angular gear MVF 49/P (i=7) , serial no. according to photo , hole spacing of mounting holes: 63 x 63 mm, Ø drive shaft: 30 mm ,used, normal signs of wear, 100% functional Iedpei D Htcsfx Anwjau

Condition: new, Manufacturer No.: UVF2D5003 Iodpfxjw Uq A Dj Anwjau

Condition: new, Year of construction: 2026, output frequency: 50 Hz, nominal power (apparent): 7 kVA, Dynaset hydraulic driven generators direct from stock! Iasdpfeic U Hdjx Anwsu Types; HG3,5S-E230SE23-15-VF HG5S-E230SE23-21-VF HG6,5E-E400SS23-34-VF

Condition: refurbished (used), HANDTMANN VF-830 F.P.A. PCM Isdpeyxntcofx Anweau The machine after capital renovation. All bearings and sealings in this machine are new. 3 months warranty for parts. Machine with clipper socket. Machine with loading. Instrumentation: grease, grease gun, rotor key, funnel key, holding device key, scraper, set of funnels and technical documentation. Delivery time: 2 weeks WITH: Linking gearbox AG-410 Holding device HV-414

Condition: used, Year of construction: 2005, FANUC 160 I-MB control KNOLL chip conveyor, type 1200 S-2, made in 2012 4 workstations Iedofxgiyspfx Anwsau

Year of construction: 2007, condition: used, THERMATOOL High Frequency Welding CFI 350 kW VF Fully revised in 2025 by Thermatool specialists Technical specifications Output power: 350 kW Welding frequency: 180 - 300 KHz Ijdpfx Anoymadbewjau Input voltage: 380 VAC / 50 Hz Total installed power 525 kVA Output power: 350 kW Welding-frequency: 180 - 300 KHz Input Voltage : 380 VAC / 50 Hz Total installed power: 525 kVA

Condition: like new (used), Year of construction: 2017, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,200 mm, table length: 3,500 mm, table width: 1,750 mm, spindle speed (min.): 24,000 rpm, Heidenhain iTNC 530 control Main spindle HSK-A 63 Ijdpfew S T Iqsx Anwjau Speeds: 1-24,000 rpm Tool changer for 50 tools Through-spindle cooling 5-axis milling machine with simultaneous milling head (Gabelkopf)

Year of construction: 2015, condition: excellent (used), Polygon and surface machining, gear and spline shaft machining, gear tooth pointing, shift stop machining, chamfering and deburring, SCUDDING Iaodjxupg Topfx Anwou See document

Year of construction: 2025, condition: new, Vertical filling machine for liquids into 3-side-seal- or pillow-bags. Including liquid dosing device (for high viscosity liquids). Twin filling layout for high capacity. Can be linked to CIP system to have an automatic circulating system to guarantee clean feeding pipes. The packaging material is sterilized by UV lights inside the machine to assure a clean environment for the packaging material and the liquid product. Contamination of the liquid product can be reduced during the packaging process to have a longer shelf life. - Specifications: max. speed of the machine in neutral: 100 cycles/minute; suitable for volumes from 200-1000ml; accuracy: +/- 1.5%; max. film width: 320mm; bag width: 100-160mm (depending on pouch type); bag length: 95-165mm; 0.7m³, 6bar; 380V, 3.9kW; machine dimensions: 1700x1100x2950mm; weight: 720kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Iedpfx Anjv Nmznewsau Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2019, operating hours: 69 h, condition: like new (used), functionality: fully functional, Spray cleaning system with basket rotation Batch size: 400 x 600 x 280 You can find more systems on our website under Used Systems. Iaedewzkq Nopfx Anwsu

Condition: excellent (used), functionality: fully functional, Handtmann VF 830, AL-System 228-01, 242-16 Vacuum Filler with AL Hanging and Linking System Vacuum filler VF 830 with AL-System 228-01 for linking/hanging as well as hanging unit 242-16. The set is designed for fully automated production of meat products, particularly sausages in natural, collagen, and artificial casings. These machines deliver high portioning accuracy, productivity, and reliability in continuous operation. 1. Handtmann VF 830 Vacuum Filler Manufacturer: Handtmann Model: VF 830 Serial number: 38725 Year of manufacture: 2016 Power: 6.0 kW Power supply: 200–260 V / 17.3 A 380–440 V / 9.1 A 480–575 V / 7.2 A Frequency: 50/60 Hz The VF 830 is a high-quality vacuum filler designed for the precise dosing of meat mixtures and other food masses. It ensures consistent portioning and a high degree of product repeatability. 2. AL-System – Handtmann AL-System 228-01 Manufacturer: Handtmann Model: 228-01 Code: 40287 Serial number: 16800980 Year of manufacture: 2017 Power: 5.5 kW Power supply: 400 V / 3~ Current: 8.3 A Frequency: 50 Hz Iasdpoxyrczefx Anwju Weight: 655 kg The AL (Automatic Line) system handles automatic twisting, separating, and portioning of sausages in a process integrated with the vacuum filler. It provides high performance and precision in linking, and supports operation with various casing types. 3. Hanging Unit – Aufhängeeinheit 242-16 Manufacturer: Handtmann Model: 242-16 Code: 38774 Serial number: 10903245 Year of manufacture: 2016 The 242-16 hanging unit enables automatic hanging of sausage loops onto rods in the production line. It ensures reliable, high-speed operation and full integration with the AL system.

Condition: used, Continuous vacuum filler for straight filling and portioning Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Electric power: 9.5 KW Machine dimensions in cm: Width: 175 Length: 140 Height: 205 Delivery time: 20 working days after advanced payment Iajdpfx Aneh Uxxtowju

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark Iedpfjvv Rfkex Anwsau We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Iodpfx Anevv H Hdoweau Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: used, Technical details: pressure: 63 t distance between columns: 900 mm no. of strokes: ca. 75 Hub/min ram adjustment: 80 mm stroke adjustable from - to: 3-100 mm Table dimensions: 900 x 600 mm throat: 310 mm dayligth: max. 350 mm drive power: 11 kW voltage: 380/220/24 V frequency: 50 Hz operating pressure: ca. 150 bar oil volume: 500 l safety distance: 150 mm passage opening in table: 200 mm total power requirement: 11 kW weight of the machine ca.: 4,0 t space requirements of the machine approx.: L:1,8 x B:1,8 x H:3,7 m DIFFERENTIAL PATH PRESS HIGH SPEED PRESS Iodpfx Anju Nfnkjwoau - High-speed press, C-stand - Compressed air connection: approx. 5 bar Condition. Press is not under power, without switch cabinet, sale as is. - Documentation available i.D. *

Condition: used, Haas ST10 CNC Lathe, New in 2018/09, Tailstock, Swarf Conveyor, Filtermist Unit - Excellent Condition, Ex College Machine. Specifications: Swing: 25.25" Iajdpfxszfad De Anwju Machining Length: 16.5" Chuck Size: 6.5" Bar Capacity: 1.75" Power: 15 hp Max RPM: 6,000 RPM Turning Dia: 14"

Condition: used, Haas TM2 CNC Toolroom Milling Machine, Table Size 270x1460mm, CAT 40 Tooling with 10 pcs of tooling, Machine Vice and collets, Travels, X-1016mm, Y-406, Z-406mm, Year 2007, Serial No 1061737 Specifications: X: 40" Y: 16" Z: 16" Iodsx Rcbropfx Anweau Power: 7.5 hp RPM: 4,000 RPM # ATC: 10 Taper: CAT-40 Table-W: 10.5" Table-L: 57.75"

Condition: excellent (used), Year of construction: 2005, operating hours: 1,963 h, functionality: fully functional, machine/vehicle number: 69724, type of input current: three-phase, Please message us with any questions we are aware there is limited information provided. Ijdpfxexvp E Es Anwsau

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). Isdpfx Aozc Id Usnwjau With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower.

Condition: excellent (used), Year of construction: 2020, 2020 Haas UMC-750 CNC 5 Axis Vertical Machining Centre Table Dimension Ø500mm (7 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=762mm, 'Y'=508mm, 'Z'=508mm, 'B'=-35° To +120°, 'C'=360°. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=22.9m/min, 'Y'=22.9m/min, 'Z'=22.9m/min, 'B'=50°/sec, 'C'=50°/sec. Maximum Cutting Feed 16,5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 40 + 1 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 305mm, Maximum Tool Weight 5.4kg. S/No. 1172799 (2020). With Coolant Filtration System (208L Tank), Hennig Chip Conveyor, Renishaw Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included. Iodpezc Idhefx Anwsau

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration unit Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:YAG laser with Hurryscan 10 - galvanometer head from Scanlab Fuchs extraction and filtration unit TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted individually Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Iedpfxozdqcue Anwjau Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.