Used Haas Vf1 Vertical Machining Centre for sale (66,644)

Condition: excellent (used), Year of construction: 2013, 2013 Quaser MF400 5 Axis CNC Vertical Machining Centre with Tilting Rotary Table with Siemens 828D CNC Control Tilting Rotary (Trunnion) Table Dimension Ø320mm (4 'T' Slots). Maximum Swing Ø400mm. Maximum Table Load 100Kg. Axis Travel 'X'=410mm, 'Y'=610mm, 'Z'=510mm, 'A'=+30/-120Deg, 'C'=360deg. Rapid traverse 'X/Y'=36 m/min, 'Z'=25m/min. MAximum Cutting Feedrate 20m/min. Maximum Spindle Speed 15,000rpm (Motor 15/20HP). Spindle Taper BT40. ATC Capacity 30 Tools. Maximum Tool Ø76mm (Ø125mm non Adjacent Tools), Maximum Tool Length 280mm. S/No. (TBC) (2013) Nedpfsy Sya Usx Akujlb With Through Spindle Coolant, Filtermist FX6002 Mist Extraction Unit, Renishaw Spindle Probe Interface, Hand Wheel & Signal Tower. Note: Tooling & Work Holding Not Included.

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 1020 x 510 x 510mm, Table 1200 x 450mm, Spindle speed 8,000rpm, Spindle taper BT40, Spindle Motor 11kW, Nlsdpfx Aksy Tka Ueujb Fanuc Oi-MC Control, 24 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,450 mm, total length: 3,200 mm, total width: 2,850 mm, table width: 1,200 mm, table length: 600 mm, table load: 900 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,039 h, coolant supply: 20 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Bridgeport XR1000 is special because it is a relatively heavy, high-quality vertical CNC milling machine that was built to be significantly stiffer, faster, and more accurate than standard VMCs (Vertical Machining Centers) in the same class. This machine has always been very well maintained by the previous owner (a sole proprietorship) and is therefore still in very good condition! Nlsdpfjy Uklmjx Akuob The machine is very well-equipped with various options and can also be viewed in our showroom while in operation. Additional options & accessories: - Controlled 4-axis (NIKKEN CNCZ 105ZA) - 20 bar coolant through the spindle. - Air to the spindle (not through it) - Coolant flushing system, wash down and wash gun. - Heidenhain touch probe TS27R. - Chip conveyor - Electronic handwheel (Heidenhain) permanently mounted on the PLC. - Original documentation + manual for the 4-axis. Weight & dimensions: approx. 6,500 kg approx. 3,200x2,850x2,450 (LxWxH)

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D, workpiece height (max.): 450 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 12,400 kg, spindle speed (max.): 12,000 rpm, distance table to spindle center: 130 mm, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 181, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We acquired this machine in working condition directly from production—see the videos of the machine operating prior to disassembly! The Mori Seiki NMV 5000 DCG is a high-end (simultaneous) 5-axis machining center, designed for precision manufacturing in industries where complex geometries and exact tolerances are crucial. Included: - KNOLL FKA/500 band filter system + 3 filter rolls. - Filtermist FX5000 coolant mist extractor. - Renishaw OMP60 3D probe. - Chip conveyor Nledpfx Asyq Emiekueb - Spindle cooler - Original Mori Seiki tool holder block. - Original documentation + electrical diagrams. This Mori received a new spindle some time ago, which has only seen limited operating hours since. Report available!

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: Nledpfx Aksxgukbsusb - Original documentation for the machine and the Weiss spindle - BLUM tool laser - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.

Condition: used, Year of construction: 2000, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: Heidenhain, controller model: 410 / 426, table load: 500 kg, overall weight: 2,500 kg, spindle speed (max.): 6,000 rpm, spindle nose: bt40, Equipment: rotational speed infinitely variable, The stated price includes loading. Nedpoy Av S Ujfx Akuolb

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 850 kg, table width: 1,020 mm, table length: 610 mm, table load: 850 kg, overall weight: 8,400 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,200 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This extremely robust Kunzmann BA 1000 is in excellent condition and can be seen in operation in our showroom. It is a relatively compact machine, yet with a large working area (X:1020 mm - Y:620 mm), a table size of 1200x610mm, and a weight of 8,400kg. Nsdpfx Ajxwk Nnekuelb The machine is equipped with: chip conveyor, electronic handwheel, rinsing gun, Losma mist extraction system, Step-Tec spindle, Heidenhain TT 140 height gauge, 3 modular machine vices, 32 high-quality tool holders including cutting tools, and the original documentation.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: FANUC, controller model: Series 0i/-MC, total height: 2,580 mm, total length: 2,150 mm, total width: 2,470 mm, table width: 750 mm, table length: 540 mm, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 1,480 h, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, Equipment: documentation/manual, rotational speed infinitely variable, The Schaublin 60 CNC is perfectly suited for high-precision work and small batch production. This machine is renowned for its exceptional dimensional and form accuracy, excellent spindle runout, and top-quality surface finish—ideal for toolmaking, precision engineering, or the medical/jewelry industry! Nodpfxjyu Rpko Akuolb The machine is standard equipped with: - Internal cooling (TSC) - Electronic handwheel - Original documentation - Approximately 30 drawbars

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: HAAS, table width: 1,219 mm, table length: 547 mm, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is set up in our warehouse and can be inspected under power! The machine is equipped with: chip conveyor, internal cooling, programmable coolant nozzle, 21-position tool changer, coolant tank, and original documentation. Nodpfsyybimjx Akuslb

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We have acquired this Japanese DMG MORI ecoMill 600V directly from production and it is in very good condition. The CMX 600V (ecoMill 600V) features a C-frame design (classic configuration) and a movable table (X-axis), which makes it suitable for general/all-round milling tasks. Additional options & accessories: - Siemens 840D SlimLine including 3D simulation. - PROGRESSLine (indicates the remaining production time and quantity for a complete machining process). - Chip conveyor - Rinsing gun - Preparation for internal cooling Nljdjy Dg Euopfx Akuob - Original documentation

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 600 kg, total height: 2,665 mm, total length: 2,440 mm, total width: 1,900 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 4,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 6,651 h, coolant supply: 20 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, A very well-equipped DMG Deckel Maho DMC 635 V with relatively low spindle hours. The machine is connected to power and can be seen in operation by appointment. Additional options & accessories: - Operation mode 4 - Internal cooling – 20 bar - Band filter system – 600L - Chip conveyor - Electronic handwheel - Original accordion cabin roof - Rinsing pistol - Approx. 30 pcs. SK40 tool holders (incl. 3D probe) - All original documentation Weight & dimensions: Nledpey E N Dcofx Akusb 4,200 kg 2440 (3500 incl. PLC) x 1900 x 2665 mm (LxWxH)

Condition: good (used), Year of construction: 2016, operating hours: 6,400 h, DMG MORI EcoMill 1100V CNC Milling Machine In well-maintained condition, DMG MORI Ecoline milling machine. Year of manufacture: 2016. Technical data: Spindle speed: 20–12,000 rpm, continuously adjustable 14 kW main motor Spindle mounting: SK40 Travel ranges: X: 1100 mm, rapid traverse: 36 m/min Y: 560 mm, rapid traverse: 36 m/min Z: 510 mm, rapid traverse: 30 m/min Table dimensions: 1400 × 560 mm Maximum table load: 1000 kg Nledpfxsy Ulb No Akusb Control system: Siemens SLIMline 3D Multi Touch 19" Weight: approx. 5830 kg External dimensions: 4898 × 2770 × 2935 mm Equipped with: IKZ (internal cooling through the spindle) Large tool magazine and tool changer with 30 positions Renishaw Power Probe 3D probing system Chip conveyor Documentation and maintenance history Tool cart with various holders and Renishaw OMP40-2.

Condition: used, MUST BE REMOVED THIS WEEK!! Emmegi machining center for aluminum. Nljdpoyy Ilnefx Akusb In working order.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 0-250-95-6951, functionality: fully functional, operating hours: 682 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, working width: 1,415 mm, spindle motor power: 10,000 W, working length: 3,100 mm, 2017 HOMAG Weeke Venture 115 CNC machining centre in excellent condition. Lightly used machine with very low spindle hours for age. Moved once since initial install. Machine is currently installed, calibrated, and available for inspection under power. - 10kw spindle - 18 position drill block with grooving saw - Multipurpose saw 118mm cut depth - 22 position tool change capacity - Pod & Rail Table with LED positioning indicator This is a clean, well-kept machine from a low-use environment, not a hard-worked production machine. Important point on specification: the machine is 5-axis capable, but the additional 5-axis software licence is not included in the sale. This can be added via Homag at additional cost if required. Buyer responsible for decommissioning, loading, transport and insurance. Nljdpfx Aksy S Dfbjujb Machine available for demonstration in situ by appointment.

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 15 m/min, controller manufacturer: Fanuc, rotational speed (min.): 54 rpm, rotational speed (max.): 10,000 rpm, number of spindles: 1, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Here we offer a vertical machining center from the manufacturer YCM. The machine is in good condition and can be inspected and tested at any time. Free loading onto a truck. Manufacturer: YCM Type: MV106A Year of manufacture: 2005 Control: Fanuc MXP-200i Technical data: Travel ranges X-Y-Z: 1020x600x600 mm Rapid traverse rate X-Y-Z: 24/24/15 m/min Feed rate X-Y-Z: 10,000 mm/min Clamping area: 1120x600 mm Workpiece weight: 800 kg Tool changer arm magazine 24 stations Spindle taper: ISO-40 Spindle speed: 45-10,000 rpm Nedpfxey Uklgs Akuolb Spindle drive: 15 kW Two-stage gearbox Spindle oil cooler Internal coolant supply for spindle (IKZ): 20 bar Power consumption: 25 kVA Machine weight: 6500 kg Machine dimensions: 2580x3065x2730 mm Transport dimensions: 2300x3065x2600 mm

Condition: good (used), Year of construction: 2018, HURCO VMX42i Vertical Machining Center Year of manufacture 2018 Control system: HURCO WinMax5 Travel distances: X – 1,067 mm / Y – 610 mm / Z – 610 mm Only approx. 3,600 spindle hours (as of March 25, 2026) Equipment: WinMax5 control system with removable electronic handwheel 2x 19” LCD color monitors (text + graphics) Network interface 2 software units (1x plain text dialog programming on the machine 1x for ISO code programming via external programming device or CAD/CAM system) Pentium technology, SSD (Solid-State-Drive) storage medium, 2 GB RAM, Ethernet interface, USB interface, System-internal self-diagnosis, WINDOWS platform Adaptipath Trochoidal milling for higher material removal rate, controlled feed rate and detection of residual material Simulation graphics Tool and material library Pocket milling with islands Synchronous thread cutting (Thread cutting without a compensation chuck) ISNC extended NC mode RENISHAW measuring probe RENISHAW workpiece and tool measurement Spindle cooler Chip conveyor Nodpfx Akoy Uhnrsujlb Chip guard cabin Coolant system Coolant spray gun Flushing system to assist chip removal LED machine light in the working area Signal light for machine operating status Set of machine feet Programming and maintenance instructions via the control system help function High-pressure cooling system for coolant supply through the spindle Coolant type: emulsion Coolant pressure: 20 bar Integrated hydraulic tool clamping system WinMax PC software NC programming system WinMax PC with 3D-plus and DXF interface Technological features: Simple programming through plain text full dialog Easy operation via PC keyboard Easy control by switching from text display to graphics display Simple programming of the finished part contour On-line help in German Included in the scope of delivery: 2 hydraulic clamping vices approx. 50 tool holders, some with tools Operating manual Machine parameters on USB stick Technical data and control system – see PDF. All technical specifications, illustrations and content are non-binding and without warranty. Subject to change, errors and omissions. All other accessories visible in the photos and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free on Truck) D-32457 Porta Westfalica exclusively packaging Delivery time: immediately Subject to prior sale / Payment immediately upon completion of purchase.

Condition: used, Year of construction: 2016, Mazak Variaxis i-500 5 Axis CNC Machining Centre. S/No. 276584 (2016) with Mazatrol Smooth X CNC Control, 500mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 500mm Diameter x 350mm x 300kg, 40 Tool ATC, CAT40 Spindle Taper, Mazak Spindle Chiller Unit, Absolent A Mist 10 Oil Mist Filter Extractor, Cromer Swarf Management and Filtration System, Renishaw RMI-Q Tooleye, Machine Weight 8000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Nsdpfx Aey Shk Uekuslb Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2016, condition: used, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 268148 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Nledpfxjy Shkns Akuob Please Note: Erowa Machining Fixture Not Included. Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2016, Mazak Variaxis i-700 5 Axis CNC Machining Centre with Mazatrol Smooth X CNC Control. S/No. 276585 (2016), 700mm Diameter Work Table, Spindle Speeds Max 18,000rpm, Max Workpiece Size 850mm Diameter x 500mm x 700kg, 40 Tool ATC, CAT40 Spindle Taper, Absolent A Mist 10 Oil Mist Filter Extractor, Mazak Spindle Chiller Unit, Cromar Swarf Management & Filtration System, Machine Weight 15000kg. Country of Origin: Japan Please Note: Erowa Machining Fixture Not Included Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Nledpey Shiwofx Akueb

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Nledjy T Ekbjpfx Akuob Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Weight: 4,000 kg

Condition: ready for operation (used), Year of construction: 2005, Offered is a vertical CNC machining center. Travels X/Y/Z: 560mm/410mm/510mm, spindle holder: SK40, spindle speed: 12000rpm, table size: 900mm x 410mm, max. table load: 500kg, tool positions: 30, max. tool weight: 8kg, max. tool length: 350mm, rapid traverse X/Y/Z: 36m/min, spindle motor: 18.5kW, operating hours: 66174h, control system: Mazatrol 640M. Equipped with 30-position tool changer, flood cooling, 1 set of manuals, 1 set of adjustment tools, adaptive feed control function, documentation available. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 2600mm/2500mm/2850mm. Inspection possible by arrangement. Nodpfey Ulmrex Akujlb

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, nominal power (apparent): 10 kVA, overall weight: 6,500 kg, spindle speed (max.): 20,000 rpm, Heidenhain TNC530, 4th axis rotary table Nlodpfx Ajw Dc Irskueb spindle 20,000 rpm, HSK 63 table 850x530 mm travels 600x450x450 mm 30-tool changer weight 6,500 kg

Year of construction: 2007, condition: used, Dimensions (LxBxH): 325 x 201 x 351 cm Quick coupler system: Yes Serial number: IN 64931/07 X-axis: 2500 mm Y axis: 1000 mm Z-axis: 800 mm Machine length: 3259 mm Machine width: 2011 mm Machine height: 3510 mm Model: LK V-SL High-accuracy coordinate measuring machine (HA) Renishaw control system Probe head controller: PHC 10-2 Interface selector: 191-2 Probe interface: PI 200 Laser control system: LC60DX Laser scanner accuracy: 9 µm Renishaw PH10M motorized indexing measuring head A-axis rotation: ±180° Nljdpfx Aey T Razokueb B-axis rotation: 0-115° Indexation step: 7.5° Total positions: 720 Maximum stylus weight: 300 g Maximum stylus length: 300 mm Position repeatability: ±0.4 µm SCHUNK quick-change clamping system Model: VERO-S NSE plus 90 Module diameter: 90 mm Operating pressure: 6 bar Clamping force: 25,000 N (25 kN) Material: hardened stainless steel Operation: pneumatic actuation with mechanical self-locking Positioning accuracy: ≤ 0.005 mm Last calibration: 19-09-2024 Renishaw control system: Probe head controller: PHC 10-2 Interface selector 191-2 Probe interface PI 200 TP 200 Renishaw probe Laser control system. LC60DX The LC60Dx is designed for high-speed, medium-range 3D laser scanning on coordinate measuring machines (CMMs). It offers excellent performance when scanning large parts, such as molds, car panels or structural components, with accuracies of up to 9 microns. Renishaw PH10M - Motorized indexing measuring head Rotational axes: A-axis: ±180° B-axis: 0-115° Indexing step: 7.5° → giving a total of 720 positive positives Interface: Autojoint/M8 connector (compatible with modular test systems such as Renishaw TP200, SP25M or Nikon/Metris laser scanners) Maximum stylus weight: approx. 300gr Maximum stylus length: up to 300 mm Position repeatability: ±0.4 µm (0.0004 mm) Applications: Measurement of parts with complex shapes (turbine blades, molds, housings, etc.). Used with probes such as Renishaw SP25M, TP200 or Nikon/Metris LC15Dx Compatible with most CMM brands (DEA, Hexagon, Mitutoyo, Wenzel, LK, etc.) SCHUNK - quick-change clamping system for use on CNC machines. It is intended for securing pallets, clamping workpieces on the machine table with very high positioning accuracy (up to 0.005 mm). Manufacturer: SCHUNK (Germany) Model: VERO-S NSE plus 90 Type: Quick-change clamping module Module diameter: 90 mm Operating pressure: 6 bar Clamping force: up to 25,000 N (25 kN) Material: hardened stainless steel Operation: Pneumatic operation with mechanical self-locking Positioning accuracy: ≤ 0.005 mm Already partially disassembled Resale at reduced prices from the online auction of a former tire mold manufacturing plant with high-end metalworking machines and tools (e.g. 2 BRETON CNC machining centers, FANUC 6-axis robotic arm, STAUBLI precision milling robot, Nikon coordinate measuring machine (CMM), OMV CNC milling machines, MARIO CANARGHI CNC carousel lathe, CHARMILLES spark erosion machine, SM Systems advanced laser/microlasher, HINDENLANG induction furnaces, etc.), workshop tools, spare parts, rolling stock (e.g. TOYOTA, STILL...

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Designed for flexible packaging of industrial food products, chemicals, powders, granular materials, frozen foods, snacks, dried fruits, rice, pasta, coffee, cereals, legumes, sugar, salt, flours, pet food, pellets, fertilizers, and other similar products. High productivity, great versatility, and a maximum speed of 60 bags per minute when working with bags that are 40 to 250 mm wide and up to 400 mm long. Accepts film, PE, composite films, heat-sealable paper, and recyclable film. Incorporates a PLC with an OMRON touch screen, software control, Ethernet and WiFi communication, peripheral integration, and SCADA connection capability. Features a vertical and horizontal sealing system, servomotor, encoder, photocell, toothed blade, Linatex belts, round, oval, or rectangular forming tubes, and an IP65 electrical panel. The machine includes a feed conveyor belt and an output conveyor belt, operates at 400 V with a three-phase power supply and an installed power of 1.5 kW. Maximum power consumption is 7 kW, and compressed air consumption is 50 to 150 l/min. Dimensions are 1950 x 1240 x 2020 mm. Nlsdpfx Aksy Ui Dnoujb

Condition: used, Year of construction: 2010, x-travel 800 mm y-travel 600 mm z-travel 500 mm control Heidenhain iTNC 530 Nlodpfxsy Ay Ito Akusb weight of the machine ca. 8300 kg