Used Hagen & Goebel Bench Thread Cutting Machine for sale (67,900)

Condition: good (used), MicroStep SPL-PA plasma cutting system with extraction and compressor technology Bedpfxsyvd Uis Af Rjdc Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Current requirement: 120 A Machine type: CNC plasma cutting system CNC control: iMSNC Design: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection for extraction system: 400 volts Motor power of extraction system: 7.5 kW Compressed air generation: Screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: present Location: Waltenhofen, Germany Dismantling and loading by the seller included.

Condition: used, Year of construction: 2020, CNC portal plasma cutting machine with skew rotator beveling unit Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Working area: 3 x 10.8 m Track width: 4,000 mm Bodpfox Dlwmjx Af Redc 1 oxyfuel torch ALFA 1 plasma torch with skew rotator beveling unit Power source: Hypertherm XPR300 Cutting thickness: 50 mm piercing 80 mm cut Extraction table Beuting without filter system Software: Omniwin with Bevel ä3626

Condition: used, Year of construction: 2008, operating hours: 17,410 h, functionality: fully functional, machine/vehicle number: 400149, FLOW waterjet machine with INTEGRATED FLYING BRIDGE We are selling our Flow waterjet machine, including a stainless steel water tank, a 6000 bar pump, and sand/abrasive feeding system. The sand filter (wastewater treatment) is optional and not included in the price. The machine has been in use at our facility since 2008 and is being replaced by a new acquisition. The machine is in very good condition, fully functional, and can be inspected at any time. Manufacturer: Flow International Corporation, 1635 Jeffersonville, Indiana 47130, USA Year of manufacture: 02/2008 Model/Type: IFB INTEGRATED FLYING Bridge Serial No.: 400149 Transport dimensions: Overall height: 220 cm Overall width: 480 cm Overall length: 450 cm Tank size: Length: 425 cm Width: 255 cm Bedpfoza A Ayex Af Rodc Cutting area: Length: 365 cm Width: 182 cm Data sheets for the machine, pump, and software are available (PDF upon request). Inspection before purchase is possible and recommended. Delivery is available upon request. Sold as is, as shown in the pictures.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, MESSER MULTITHERM 3600 GLOBAL CNC PLASMA BED LENGTH 10300mm BED WIDTH 2100mm Bjdpfxoy Tpqxe Af Redc RAIL WIDTH 3650mm HYPERTHERM HPR 260. Cutting capacities: Mild steel cut capacity Dross free* 32 mm (1-1/4") Production pierce 38 mm (1-1/2") Maximum cutting capacity 64 mm (2-1/2") Stainless steel cut capacity Production pierce 32 mm (1-1/4") Maximum cutting capacity 50 mm (2") Aluminum cut capacity Production pierce 25 mm (1") Maximum cutting capacity 50 mm (2")

Condition: as good as new (ex-display), The Plasma-Jet AirPro Compact 1530 Maxpro is a state-of-the-art plasma cutting machine designed for the Plasma Cutting Machines category, offering exceptional performance within the compact product group. Built for efficiency and reliability, this system features a one-piece design that ensures easy transport and rapid setup, ideal for custom and small-series manufacturing environments. With a cutting length of 3,050 mm and a width of 1,550 mm, the machine can handle substantial cutting tasks while minimizing operating costs. It comes configured with high-performance features such as a powerful MAXPRO 200 plasma source, an intuitive PULSER 3 CNC unit, and professional ProNest LT nesting software. The machine utilizes EtherCAT technology for optimal CNC performance, while the robust linear guides provide accurate, long-lasting operation. In addition, a built-in collision guard protects against damage, and a magnetic coupling allows for quick maintenance. Invest in your workshop's capabilities today by requesting a quote for the Plasma-Jet AirPro Compact 1530 Maxpro – a precise solution in the Plasma Cutting Machines product group. Bdsdpfx Aeyg Dg Tof Rjc

Condition: used, laser type: CO₂ laser, laser source model: Laser Coherent CO2, workpiece weight (max.): 100 kg, - Laser Tube LT8 year 2009 - Machine hours: 80.000 - Automatic profile loader with 8500 mm, bundle management system. Rear installation side - Manual loader for single bar length 8500 mm. Front installation side - Automatic support/unloader for cut parts with a maximum length of 8500 mm, max. unloading length 8500 mm. - Metal conveyor with evacuation on the back for waste up to 350 mm. - Evacuator for cut pieces with max. length = 500 mm. - Piece collection bench on the front side - 3D head integration with inclination from + 45° to - 45° - 7.5" Lens and Lens Holder - 5" Lens and Lens Holder - Active Piercing LT8: device for controlling and optimizing the piercing process - Optical weld seam detection device - CO2 Rofin Sinar DC035 - 3500 Watt laser source - Closed circuit chiller for laser source Rofin DC 030-035 - Smoke extractor - USB key for Artube software - CAD – CAM Artube [first license] Bdjdpeza S Ifefx Af Roc - IGES / STEP Artube import module [first license]. - Artube Post Processor for LT8 [first license] - Artube Service Contract [one year] - Remote assistance equipment for VPN Internet connection.

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Bodpeyx Svbsfx Af Rsdc Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.

Condition: used, functionality: fully functional, Combined profile shear (ironworker) for metalworking. Punches, cuts, notches, and severs structural steel (angles, flat bars, round bars, square bars) in a single machine. Robust East German/West German industrial design – extremely durable, easy to maintain, no high-tech frills. Features a large base plate and multiple workstations. Ideal for locksmiths, steel construction companies, metalworkers, blacksmiths, training workshops, or well-equipped hobbyists with sufficient space. A comparable new machine costs well over 15,000 EUR. Technical data: - Design: Combined profile shear with multiple stations (punching, shearing, notching, profiling) - Drive: Three-phase motor 400 V - Shear blades: included - Punching tools: included (see photo) - Steel base plate: cast, very stable - Machine weight: approx. 1,500 - 2,500 kg - Year of manufacture: approx. 1970s-1980s Collection / Transport: Bdodpfx Afozabv Sj Rjc Self-collection with a heavy-duty forklift (>= 5 tons) or crane. Loading on site is possible. Shipping via a low-bed trailer is available by arrangement.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 310 mm, warranty duration: 12 months, pump pressure: 2,000 bar, power: 3.7 kW (5.03 HP), OMAX ProtoMAX® – the smallest industrial-grade waterjet cutting system in the world! Bjdpfjy Umphox Af Redc Its compact design, combined with its comprehensive versatility, makes the ProtoMAX® waterjet cutting system a perfect solution for applications such as the production of small batches and prototypes, as well as for educational purposes. Furthermore, the ProtoMAX® can also be used as a complement to larger waterjet cutting systems. Thanks to its small footprint, the ProtoMAX® waterjet cutting system is ideally suited for smaller spaces. Mounting the system on rollers allows for easy and straightforward relocation. ✔ 3.7 kW pump with 2,000 bar operating pressure ✔ Cutting thickness up to 25 mm for a wide range of materials ✔ Efficient and reliable pump technology with direct drive ✔ Includes laptop with pre-installed CAD/CAM software ✔ Quiet and clean underwater cutting (< 76 dB) ✔ Protective cover with safety switch ✔ Clamping device for securing the material A timely delivery can be arranged with INNOMAX AG. This is a demonstration machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, 2022 IPG Photonics GENESIS YLR 1500 WC 1.5kW Laser Welder Cell Model: SYSLC0000058U, S/No: PD206000, Power Supply: 380–415 VAC Phases: 3P + N + PE , Frequency: 50/60 Hz , Full Load Current: 25 FLA Overcurrent Protection: 30 A SCCR (Short Circuit Current Rating): 10 kVA. Circuit Diagram: DOCCHSDMPSXX0225 , Laser Source Model: YLR-1500-WC, S/No: PLMP32200563, Power Supply: 200–240 VAC, 1 Phase, 50/60 Hz , Rated Power: 4500 VA , Chiller – IPG Photonics , Model: LC71.01-A.4.5/6 , S/No: PC220200019 , Power Supply: 400/480 V, 3~ (3-phase), 50/60 Hz, Overcurrent Protection: 30 A / Type 1 Short Circuit Current: 50 kA, Rated Full Load Current: 16/17 A, Motor Current (Max Motor Load): M1 5.5 A, Circuit Diagram: P35-001221, Cooling Capacity: 5.5 / 5.9 kW. Refrigerant: R407-C, 2.2 kg, Maximum Operating Pressure: 30 bar Bdedpfjzbcq Tex Af Rjc

Condition: refurbished (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, warranty duration: 24 months, pump pressure: 4,000 bar, power: 30 kW (40.79 HP), OMAX OptiMAX 60X TiltaJET, 30 kW EnduroMAX pump, and TiltaJET for absolutely vertical cuts. Completely overhauled with manufacturer certification and a two-year warranty! The waterjet cutting system from the latest OMAX high-end OptiMAX series, featuring a bridge construction, represents the pinnacle of technological feasibility combined with reliability, durability, and maximum load capacity. Low-noise and low-emission operation combined with simple PC-assisted operation for precision at the touch of a button makes this series ideal for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7 operation. Features: • Closed measuring system • Digital drives • Brushless servo motors • Precision linear guides, surface-hardened • Portal (bridge) driven on both sides • Maintenance-free IntelliTRAX drive • Energy-efficient ultra-high-pressure EnduroMAX pump • Practical water level regulation as standard • Ergonomic control panel on wheels • IntelliMAX Premium control software • Highly accurate 5-axis TiltaJET kinematics • Accuracy up to ± 0.02 mm • Software and machine components based on the latest OMAX technology Bdjdpoy Umhkefx Af Rec With the TiltaJET swivel head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swivel head automatically compensates for the cutting angle error on the cutting edge, regardless of the selected quality and cutting speed. The configuration of the waterjet cutting system can be freely selected. The system can be expanded with extensive accessories according to your cutting requirements. Please contact us and let us know your configuration requirements. Upon request, financing via leasing is possible at very attractive conditions, e.g., up to 86 months. The machine has been completely overhauled; therefore, the images may differ from the offer. A timely delivery can be arranged with INNOMAX AG.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 57,467 h, machine/vehicle number: 30003596, degree of automation: semi-automatic, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: Bylaser 4400, laser hours: 57,467 h, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, power: 62 kW (84.30 HP), input voltage: 1,200 V, input current: 125 A, input frequency: 50 Hz, Equipment: CE marking, Bystar 3015 laser cutting machine from Bystronic. All maintenance has been carried out correctly by Bystronic and is up to date. The machine is ready for operation and is currently in use. Includes automation with Bytrans 3015 (year of manufacture 2006). Includes cooling system. Includes filter system. Includes 5-inch and 7.5-inch cutting heads. Includes accessories such as lenses, nozzles, etc. Bdodpjyxcvfjfx Af Roc We have two laser machines that we need to decommission by the end of July 2026. The price is symbolic and can be significantly reduced if the buyer assumes the decommissioning costs.

Condition: excellent (used), Year of construction: 2020, operating hours: 860 h, functionality: fully functional, machine/vehicle number: 2426201745, type of input current: AC, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, table length: 3,000 mm, working width: 2,000 mm, Equipment: documentation/manual, ZINSER 2426 CNC plasma cutting machine with Hypertherm XPR170 VWI Year of manufacture 2020 – Very good condition – including programming software For sale is a well-maintained and little-used CNC plasma cutting machine, type ZINSER 2426, with a Hypertherm XPR170 plasma source. The machine is in very good technical and optical condition and has only been used in our own operations. It is immediately ready for use and can be inspected and demonstrated under power after prior arrangement. Technical data: Manufacturer: ZINSER Type: 2426 Year of manufacture: 2020 Control system: ZINSER CNC 5010 Plasma source: Hypertherm XPR170 with VWI technology Cutting table: 3,000 × 2,000 mm Travel range, longitudinal axis: approx. 4,000 mm Side arm on the right Preparation for the integration of a pipe rotating unit Bdsdpjza Eufefx Af Rjc CNC-controlled height control Programming software / nesting software included Special features: The combination of the ZINSER machine and the Hypertherm XPR170 enables precise and economical cutting operations in mild steel, stainless steel, and aluminum. The modern XPR technology ensures excellent cut quality and high process reliability. Another advantage is the existing preparation for a pipe rotating unit, which means that the machine can be easily expanded if required. Scope of supply: ZINSER 2426 CNC plasma cutting machine Hypertherm XPR170 plasma source ZINSER CNC 5010 control system Programming software / nesting software Documentation and manuals Not included in the scope of supply: Extraction system. Location: Austria Inspection and test cut possible after prior arrangement. Disassembly and transport are to be organized by the buyer.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 4,000 W, power: 4 kW (5.44 HP), warranty duration: 12 months, Equipment: documentation/manual, TRADE FAIR MACHINE AT A SPECIAL PRICE!!! SF 1530G 4KW Max 5G laser source with Precitec head. Also enables cutting of aluminium! This compact machine with a side pull-out table is space-saving, while still capable of processing large-format sheets. Cutting area: 1500x3000 mm. Also ideal for your business! Cutting up to 18 mm (mild steel S235) possible!! Bjdjqwzuxspfx Af Rsdc

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, SF 1313G with 3 kW laser source, immediately available from stock in Büren! Includes installation and training / machine control in German. Working area 1300 x 1300mm. Weight approx. 2,000kg. Dimensions (L x W x H): 2985*2160*2000mm. The cutting system is particularly space-saving and even features an integrated control cabinet! Top machine, small and compact, fits into any production! Bjdpfx Aoiqnv Dof Rsdc

Condition: excellent (used), Year of construction: 2015, Workpiece diameter: 1.0 – 25 mm Workpiece length with stop: up to 500 mm Bjdpoypagusfx Af Rjdc Smallest workpiece length: from 5 mm Longer lengths also possible without stop Cutting spindle approx. 5400/11120 rpm Grinding spindle 2160/4,450 rpm Cutting disc diameter 125 x 1.5 x 20 mm Grinding disc diameter 100 x 50 x 20 mm Dimensions and weight: Dimensions 800 x 450 mm x 1,100 mm Weight approx. 200 kg The precision length cutting machine was inspected and cleaned by me, defective components was renewed. The machine combines cutting and grinding in a single operation and is ideal for high-precision machining of small to medium-sized workpieces such as ejector pins, sleeves or punches. Ideally suited for: Tool and mould making Punching and forming technology Production of carbide and HSS tools Precision mechanics and manufacturing technology Combined cutting and grinding in one machine High precision with short cycle times Suitable for steel, HSS and carbide

Condition: good (used), Iijima’s excellent, high-speed JF-1030, manufactured in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting unit adapted to be compatible with/for Bobst die-cutting blades and mounting strips. Sector segment driven by a dual set of bevel gears instead of the previous triple system. Smoother and vibration-free, improved operation of the gripper carriages. Chains renewed in May 2023. Gripper carriages have been repaired where necessary, but not replaced; current tolerance on front registration for rigid cardboard types < 0.15 mm. Engagement clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all rolling bearings on this shaft, including those in the oil casing just before and after the worm gear. Oil seals replaced. Oil casings flushed and thoroughly cleaned in preparation for conversion from mineral oil to full synthetic oil. Absolutely no foaming, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be supplied including installation, transport, and warranty. Other specifications as per the factory brochure. Technical Specifications – Flatbed Die Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout ⸻ Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm Bdedpfex Ndu Dex Af Roc • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm ⸻ Performance • Maximum cutting pressure: when running max. sheet size • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable • Normal cutting rule height: 8 – 12 mm ⸻ Pile Data Feeder pile • Height (incl. pallet): 1,200 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,080 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg ⸻ Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg ⸻ Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min ⸻ Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: good (used), Year of construction: 2014, 1 x cutting drum Bdodpfx Afoy Udads Rec Manufacturer: FERAG Model: SNT-50 Year of manufacture: 2014 Condition: good, in production until disassembly Other used FERAG components, such as infeed and outfeed stations (including newer models) and SDB systems, are available. Just inquire!

Condition: used, In very good condition Cutting machine Wohlenberg CUT-Tec 92 Schneidmaschine / Cutting machine Wohlenberg CUT-Tec 92 Year 2002 - Serial-No. 3810-001 Schnittbreite max. 920mm / Cutting width max. 920mm Programm - Display / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Bjdpey U U Skjfx Af Rjdc Sehr guter Zustand - in very good Condition   Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2013, FOR SALE: ERLENBACH ESA 5 Cutting Line with VIRO PPZA-1300/6 Packaging Machine Technical Data and Year of Manufacture: -Erlenbach ESA 5: Year 2013 -VIRO PPZA-1300/6: Year 2011 -Condition: Used for less than one month (like new) -Maximum block dimensions (L × W × H): 5100 × 1260 × 1260 mm -Cutting speed: 1.5 m/min -Waste recycling system: top, bottom and side trimming waste grinder Additional Features: -Full Oscillating Wire Cutting on All Stations The machine is equipped with an oscillating wire system on every cutting station: -Horizontal cutting station: up to 61 oscillating wires -Vertical cutting station: up to 11 oscillating wires with oscillation system -Down-Cutter station (top-to-bottom package cutting): equipped with full wire oscillation -Automatic Wire Positioning Automatic wire positioning is available on the key cutting stations: -Horizontal cutting station -Down-Cutter station (top-to-bottom cutting) -Automatic Adjustment for 5 m and 4 m Blocks The machine is factory-designed to process both 5-meter and 4-meter EPS blocks. Automatic cylinder adjustment in the Down-Cutter station: Bodpsv Hm A Tjfx Af Rodc When the operator selects either the 5-meter or 4-meter block option in the control menu, the machine automatically repositions the holding device and support barrier using a pneumatic cylinder. This ensures that the front side trimming waste produced during top-to-bottom cutting always falls precisely into the designated collection area. No manual adjustment is required.

Condition: good (used), Year of construction: 2016, Internal item no.: 26001 Taxed under the differential taxation scheme according to §25a German VAT Act. You will receive a proper invoice, but VAT is not separately shown. You are welcome to inspect the machine under power in a heated warehouse area of over 500 m². Column Drilling Machine Geldmacher DP25 Year of manufacture: 2016 Bjdsygvtxepfx Af Rsdc + Thread cutting function + Infinitely variable speed (150 - 3000 rpm) + Coolant pump + Emergency stop / safety cover with switch (UVV compliant) Dimensions (approx.): 90 x 65 x 185 cm Weight: approx. 350 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 18,649 h, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Working area (L x W): 3,000 mm x 1,500 mm Laser power: 5,000 W Sheet metal thickness, mild steel max.: 25 mm Sheet metal thickness, stainless steel max.: 20 mm Sheet metal thickness, aluminum max.: 12 mm MACHINE DETAILS Bodpfx Asy U U I Sjf Rodc Control system: CNC Operating hours NC ON: 38,900 h Operating hours Laser ON: 39,498 h Operating hours Beam ON: 18,649 h As of January 22, 2026 Machine weight: 12,000 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 45,815 h, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, Included in the purchase: TruLaser 5030 Classic + LiftMaster L3030 + TruFlow 5000 TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 1,500 mm Travel Z-axis: 115 mm Laser power: 5,000 W Max. sheet thickness - mild steel: 25 mm Max. sheet thickness - stainless steel: 20 mm Max. sheet thickness - aluminium: 12 mm Max. workpiece weight: 900 kg Bdodey U U Dmjpfx Af Roc MACHINE DETAILS Control type: CNC Beam-on hours: 45,815 h Laser-on hours: 86,475 h Dimensions & Weight Dimensions (L x W x H): 11,100 x 4,600 x 2,400 mm Machine weight: 12,000 kg

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm Bsdpfx Asy Urziof Redc – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for operation Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: good (used), EBA 721-06 LT Paper Cutting Guillotine The machine has been serviced and is ready for operation. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine, with a 721 mm knife length, is equipped with infrared safety curtains, a hydraulic pressure device, and an electromechanical cutter bar drive. Standard equipment also includes a programmable timer and electronic saddle position readout with an accuracy of 1/10 mm. The machine’s main work table is made of stainless steel with a blower. Technical data: Cutting length 721 mm Infeed height 78-80 mm Infeed depth 720 mm Power supply 400 V Bedpfezaz S Hox Af Redc Weight 620 kg Key features: Electromechanical knife drive, Hydraulic clamp, Fully adjustable cutting force (250-2000 kg), Optical cutting line indicator, Air table (on front and rear tables), Pedal for pre-marking the cutting line using the clamp or optical cutting indicator, Solid, adjustable steel knife carrier, Blade made of high-quality HSS steel. Safety features include: „Safety curtain” – a photocell in the front table, Transparent safety cover on the rear table, Safe drive – IDEAL patent, Electronically controlled two-handed cutting start, Automatic knife return from any position, Main switch equipped with a key switch. Key-operated Knife replacement possible with the blade permanently covered The set includes: a safety knife change tool, operating tools, a paper tapping tool, and a spare knife.