Used Hang Paper Drill for sale (8,629)

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). Isdpfx Acey R Tk Rswjtg With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Year of construction: 2010, condition: good (used), Double mitre saw DGS400 for 45° (frame) cuts with digital left stop. Drilling or dovetail milling machine T20NC for frame assembly. 4 motors at 1.1 kW. Speed: 26,500 rpm. Direction of rotation: right and left. Milling cutter / drill bit. Itedsxxytxjpfx Acwsg

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, Arm length 1800 mm, drilling capacity 80 mm, weight 7000 kg Itedpeyzq Dpofx Acwjg

Condition: used, empty load weight: 7,440 kg, axle configuration: 3 axles, first registration: 04/2019, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2019, ref: F0866670 Equipment: * Air connection: Red/Yellow head, * Electrical connection: 1 x 15-pin, * ABS, * EBS, * Customs cable, * Document box, * Railway coding, * Device for railway loading, * Side impact protection, * Wheel chock: 1, * Access ladder, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding cover, * Tension rod for sliding cover, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Insertion strip (aluminum): 32, * Customer lettering Itodsy Tbmxopfx Acwsg VIN: WKESD00000866670 Tire size: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 3.97m Internal height: 2.65m

Condition: used, empty load weight: 7,440 kg, axle configuration: 3 axles, first registration: 06/2019, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2019, ref: F0866686 Equipment: * Air connection: Red/yellow head, * Electrical connection: 1 x 15-pin, * ABS, * EBS, * Customs cable, * Document box, * Railway coding, * Device for railway loading, * Side impact protection, * Wheel chocks: 2, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding tarp, * Tensioning rod for sliding tarp, * Side sliding curtain, * Multilock, * Floor: Plywood floor, Iedpfx Asy Tbmrjcwstg * Insertion strip (aluminum): 32, * Customer lettering VIN: WKESD00000866686 Tire dimension: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 3.97m Internal height: 2.65m

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 5,000 kg, empty load weight: 2,100 kg, Paper roll clamp Load center: 800 ISO class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: very good Itodpfxsy Tc Ahj Acwjg Description: In addition to this unit, we offer other forklifts and warehouse technology equipment. Our equipment has been inspected according to workshop and FEM4.004 standards. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. Of course, we also buy your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing at favorable terms are available upon request. We will gladly provide you with competent and comprehensive advice on our vehicles.

Year of construction: 2023, condition: used, machine/vehicle number: 0799-250012, TM Minibox by Hartner – The compact solution for maximum tool control Increase your efficiency directly at the workplace: The TM Minibox is the smart, space-saving tool dispensing system for your production. Whether as an entry into digital tool management or as a supplement to your existing infrastructure – with the TM Minibox you take your production to the next level. Iedswpr Tnopfx Acwstg

Condition: used, bore capacity in steel (diameter) / mm throat / mm bore stroke 70 mm total power requirement 0,9 kW Itedjy Tbv Tspfx Acwjg

Condition: good (used), Drilling capacity: 13 mm Spindle mount: B 16 6 spindle speeds: 410 - 3400 rpm Drilling depth: 60 mm Machine dimensions (L x W x H): 750 x 660 x 1340 mm Weight: 250 kg - Drilling head with adjustable height - Motor with pole changeover Itsdpfx Ajwnfarocwog - Speed adjustment via V-belt Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Condition: used, Year of construction: 2000, number of spindles / Iodpfsy S Dm Sox Acwjtg bore capacity in steel (diameter) / mm bore stroke / mm BD13M – 5-Spindle Gang Drill / Bench Drill

Condition: used, Year of construction: 1981, machine/vehicle number: 800 02 81 46, type of input current: three-phase, Specialized EDM drill (eroding machine / hole starter EDM machine) Itodpfx Acey Su Iyjweg This machine is primarily used in metalworking as a hole starting EDM machine or for spark eroding the removal of broken tools (such as taps, drills, or reamers) from valuable workpieces. This is done with extreme precision without damaging the surrounding thread or material.

Condition: new, functionality: fully functional, Key features of the DOOSAN T4005 Drill Tap Center may include: High Precision: The DOOSAN T4005 Drill Tap Center is engineered for precise drilling and tapping results, delivering consistent quality in manufactured components. High-Speed Spindle: Featuring a powerful, high-speed spindle, the machine efficiently processes various materials—such as metals, plastics, and composites—while maintaining productivity. Itjdpfey Sv Tqex Acwjg Multi-Axis Capability: Many DOOSAN T4005 models are equipped with multiple axes, enabling complex machining operations and greater flexibility in component production. Automatic Tool Changer: The machine often includes an automatic tool changer, allowing for smooth transitions between different tools and minimizing setup times to enhance efficiency. User-Friendly Interface: The CNC system typically offers an intuitive user interface, simplifying programming, process monitoring, and operation for users at all experience levels. Robust Construction: Designed for industrial use, the machine is built with high-quality materials and components to ensure durability and continuous operation. Customization Options: Depending on the manufacturer, the CNC machine may offer various customization options to adapt to specific machining or production requirements.

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Iodpforn Riqjx Acwotg Torque at the spindle: max. Nm 250 Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: ready for operation (used), A gang drilling machine is offered. Number of spindles: 3, drilling capacity: 8mm, spindle holder: B12/MK1, table clamping surface X/Y: approx. 1050mm/300mm, speed range: 450rpm - 4500rpm, control system: manual. Equipped with quick-action drill chucks, solid cast iron base, emergency stop switch. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 1200mm/850mm/1700mm. Inspection possible by arrangement. Itjdsy Tau Uopfx Acwog

Condition: ready for operation (used), A column drilling machine is offered. Drilling capacity: 40mm, spindle holder: MK4, table clamping surface X/Y: approx. 550mm/450mm, speed range: 25rpm - 3000rpm, control system: manual. Equipped with machine vise, height-adjustable drilling table, coolant system. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 1000mm/700mm/2100mm. Inspection possible by arrangement. Itsdpfx Asy Tavfjcwjg

Year of construction: 1976, condition: ready for operation (used), A column drilling machine is offered. Drilling capacity: 32mm, spindle holder: MK3, table clamping surface X/Y: approx. 450mm/350mm, speed range: 100rpm - 1600rpm, control system: manual. Equipped with quick-action drill chuck, height-adjustable drilling table, foot switch. Weight: approx. 480kg, overall dimensions X/Y/Z: approx. 600mm/800mm/1850mm. Inspection possible by arrangement. Itodsy Tavljpfx Acwsg

Condition: used, Year of construction: 2006, Radial drilling machine Manufacturer: Valmer Type: TR 80/2500 SP Year of manufacture: 2006 Iodpfsw Dbgysx Acwetg Table dimensions: 1,000 x 800 x 560 mm Maximum drilling diameter: 80 mm Maximum threading diameter: 42 mm Distance between spindle axis and column, maximum: 2,500 mm Distance between spindle axis and column, minimum: 500 mm Head movement, horizontal: 2,000 mm Distance between spindle nose and work surface, maximum: 2,000 mm Distance between spindle nose and work surface, minimum: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg 19526

Condition: used, Currently in use in Zaventem, Belgium. In very good condition. Ijdey Siqcopfx Acwstg

Condition: good (used), Year of construction: 1982, Drilling diameter: 50 mm, gray cast iron: 60 mm Maximum spindle-guide distance: 1600 mm Vertical arm travel: 875 mm Carriage travel on the arm: 1280 mm Arm rotation: 180° Itodpfx Acjwlh E Sowjg Morse 5 spindle taper Spindle stroke: 310 mm Number of spindle speeds: 16 Maximum spindle torque: 31,000 Nm Mounting surface: 1820 x 986 mm Dimensions: 3100 x 1120 x 3396 mm Weight: 4300 kg

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer, cordless rotary hammer Itodpfx Acouwgg Dewjg -Manufacturer: Bauhaus Toolson, Cordless drill/driver type PRO-AS 18 Li-1 -Includes: charger and 1x battery -Number: 4x drill drivers available Price: per piece -Transport dimensions: 240/180/H240 mm Total weight: 1.9 kg/pc.

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 1,370 mm, BM5164 P137 EMC MON - refurbished EM electronic Monitor display LMS (Length Measuring System) => NEW 6-channel light guards two hand safety cutting back table guarding optical cutting line indication air table slot cover at back table side tables (2) adjustable hydraulic pressing 2 knives, documentation, el. diagrams, tooling Electric: 380V / A 12.3 / 50 Hz / 3 cycles ----- Additional periphery available at extra costs - intergrated hydraulic paperlift RH and/or LH - Unloader-Stacker TR130-ER-4 =>BM5134 - Paper Waste Disposal System =>BM5018 - Paper Jogger RA-B-5 =>BM5149 Ijdsy Spl Tspfx Acwjtg

Condition: excellent (used), Year of construction: 1988, operating hours: 9,807 h, functionality: fully functional, machine/vehicle number: 17483, NOTTMEYER KOMET SUPER S/PN - very well maintained Itjdpfex Af D Rox Acwsg - fully functional - available immediately

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg Itodpfx Acsihmwtswsg good condition

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Itedpjxddwrofx Acwjg Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: used, Column Drilling Machine INFRATIREA - ORADEA Type PH - 031 Serial No. Year of manufacture 1975 Drilling capacity 40 mm Spindle taper MK 4 - short quill Throat depth 320 mm Quill stroke 250 mm Table size 400 x 400 mm Column diameter 160 mm Spindle speed 85 - 1500 rpm, 6-speed gearbox Motor power 2.2 kW Power supply 400 Volt, 50 Hz Itsdstrpifopfx Acwsg - Spindle speed adjustable over 6 gear steps - Right and left-hand rotation - Automatic feed 0.10 - 0.16 - 0.25 - 0.4 mm/rev - Swivel drill table - Table height adjustment via hand crank - Clamping surface on machine base - Coolant pump integrated in base Required space L x W x H 1000 x 600 x 2450 mm Weight 700 kg