Used Hang Paper Drill for sale (8,923)

Condition: ready for operation (used), Engine: CAT 3054 DI-T(EPA), power/speed: 78.5kW(107hp)/2300rpm, max. power: 80.5kW (110hp), diesel tank capacity: 160l. Hydraulic system: Hydraulic pumps: 1) circuit: 92l/min, 2) circuit: 73.6l/min, 3) circuit: 18.4l/min, 4) circuit: 8l/min, system pressure: 250bar, hydraulic tank capacity: 350l. Crawler chassis: type: B1, tractive force: 75kN, travel speed: 2.2km/h, specific ground pressure: 5.3N/cm², total width: 2200mm, length of crawler tracks: 1900mm, ground clearance: 390mm, oscillation possibility: +18°/-8°. Drilling equipment: permissible torque: 20kNm, total length: 5765mm, feed length: 4300mm, max. boom length: 4000mm, feed force: 40kN, retraction force: 60kN, feed speed: 9m/min, retraction speed: 9m/min, fast feed: 47m/min, fast retraction: 47m/min. Transport dimensions X/Y/Z: 6470mm/2200mm/2560mm, weight: 8500kg. Documentation available. Bjdetpp Ifjpfx Afwodg

Year of construction: 1999, condition: used, Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible. Bsdpfx Ajzuzzijfwjdg

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: K08003, cutting length (max.): 650 mm, type of input current: three-phase, working width: 1,170 mm, input voltage: 380 V, NEWLONG 2036TS + 508HS Automatic Paper Bag Making Machine Manufacturer : NEWLONG Bjdpfezmq T Esx Afwjdg Model : 2036TS + 508HS Year : 2008 Serial No. : K08003 Origin : Japan Condition : Good Working Condition Specifications • Bag Width : 200 - 360 mm • Bag Length : 260 - 590 mm • Cutting Length : 350 - 650 mm • Bottom Width : 70 - 210 mm • Max. Paper Roll Width : 1,170 mm • Production Speed : Up to 180 bags/min Main Features • Full Servo Controlled System • Gearless Drive • Shaftless Unwinder • Automatic Roll-fed Operation • Concealed Flat Paper Handle Unit (508HS) • High Precision Photo Cell Registration • Fast Size Changeover • Stable High-speed Production The machine is in good operating condition and can be inspected under power. Inspection and test run are available upon request. Please contact us for additional photos, videos, or quotation.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Bdsdpoxwaz Hefx Afwsg

Condition: used, Year of construction: 2019, load capacity: 1,200 kg, Paper roll clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Bsdpfxeud Eaae Afwjdg Technical condition: good Description: ISO 2A (41 cm) Year 2019 Capacity 1200 kg Opening range 530-1670 mm Clamp length 1000 mm Contact pads 250x900 mm Tilt range: 90° Width 1100 mm ID OS1386

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 4,600 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Bdsdpfxow Dwrre Afwjg Technical condition: good Description: Year 2014 ISO 4A (61 cm) Capacity 4,600 kg Rotator 180° Opening range 250-1520 mm Width 930 mm Contact pads 280x500 mm ID OS1553

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 4,000 kg, Paper roll clamp Load center: 650 ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully operational Bsdpfxex Racyo Afwedg Technical condition: good Description: Year 2020 ISO 4A (61 cm) Capacity 4,000 kg Rotator 180° Opening range 250-1,300 mm Width 1,200 mm ID OS1813

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 6,500 kg, Paper roll clamp ISO class: ISO class 4 = 5,000 - 10,000 kg Bedpfxst S Sq He Afwedg Condition: Ready for use and fully functional Technical condition: good Description: ISO 3A/4A Year 2018 Capacity 6500 kg Opening range 500-1300 mm Width 930 mm Pad 1200x270 ID OS1252

Condition: new, Drilling capacity in cast iron / steel ----- 28 / 25 mm Tapping capacity in cast iron / steel ----- 22 / 18 mm Motor ----- 1.1 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle taper ----- MK3 Drill table ----- 380 x 380 mm Base ----- 535 x 360 mm Maximum distance spindle - table ----- 825 mm Maximum distance spindle - base ----- 1220 mm Weight ----- 210 kg Bdjdpfx Afjga T D Noweg INCLUDED * LED work light * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Various tools in a case

Condition: new, WMD25LV - 230V / 1Ph Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Face milling ----- 63 mm Motor ----- Brushless 750W Spindle speed, continuously variable 50 - 3000 rpm Spindle stroke ----- 50 mm Bedsga T Eispfx Afwedg Spindle taper ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Overhang ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill chuck incl. chuck key * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Box with various tools OPTIONAL * Base cabinet € 249.00 excl. VAT

Condition: new, Motor ----- 1100W - 400V - 3-Phase Drilling capacity ----- 32 mm Spindle stroke ----- 120 mm Spindle taper ----- MK4 Number of speeds ----- 12 Spindle speed ----- 150-2450 rpm Work table ----- 470 x 420 mm Base ----- 580 x 430 mm Column diameter ----- 92 mm Overall height ----- 1720 mm Weight ----- 128 kg Packaging ----- 1430 x 660 x 320 mm Bdjdpfx Afjga T Hrewjg INCLUDED * Digital depth stop * CE guard * Laser device * LED lighting * CE emergency stop * Drill chuck with MK4 taper * Ejector pin

Condition: used, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 380 V, input frequency: 50 Hz, spindle mount: MK 2, actuation type: electric, overall weight: 150 kg, quill stroke: 120 mm, Equipment: type plate available, Gillardon pillar drilling machine Manufacturer: Maschinenfabrik Wilhelm Gillardon II, Bretten i. Baden According to the information on the attached nameplate, the drilling machine is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor Three-phase asynchronous motor, type KPER 80 K 4 VEM Motors Thurm GmbH, D Zwickau Bdodpfeh N Svljx Afwsg 3 speed ranges via belt drive. Pinole stroke approx. 120 mm, drilling spindle with Morse taper 2, weight approx. 150 kg / approx. 1380 RPM MK2 drilling column Power consumption 0.75 kW, mains connection 380 volts, 50 Hz. Good used condition Nameplate present An inspection of the bench drilling machine while it is powered on is possible after prior appointment. Price negotiable Our asking price is €390 net ex works, plus packaging costs. All technical specifications are subject to typographical errors/mistakes. Sale exclusively within EU countries.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS Bdsdpfsh Ek H Sex Afwjg EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: new,

Year of construction: 1994, condition: excellent (used), 29 spindles Bodpeiclfbofx Afwjdg maximum width of the element 168mm left / right spindles 32mm spindle spacing electric adjustment of the angle of the aggregate 4 pneumatic clamps pneumatic extension of the drilling head power supply 380V

Condition: new, Motor: 750W - 230V - 1 Phase Drilling capacity: 20 mm Spindle stroke: 85 mm Spindle taper: MK2 Number of speeds: 16 Spindle speed: 220-2840 rpm Work table: 305 x 305 mm Base: 460 x 280 mm Bodsk Iuqyopfx Afwjdg Column diameter: 72 mm Overall height: 990 mm Weight: 60 kg Packaging: 820 x 500 x 290 mm INCLUDED * Digital depth stop * CE protective shield * Laser guide * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Ejector pin

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Bdjdpfx Afji D Da Aoweg Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Bodpfx Aoikvcasfwsdg Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control HEIDENHAIN TNC 155 Manufacturer's No. 16186651 Year of Manufacture 1986 Spindle Taper FEHLMANN SF32 Drilling Capacity Ø 30 mm in steel Thread Cutting up to M20 in steel Travel X: 850 mm, Y: 435 mm Quill Stroke Z: 210 mm Vertical Movement of Milling Head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid Traverse X and Y 8 m/min. Rapid Traverse Z 4 m/min. Table Clamping Surface 1570 x 500 mm Distance Spindle Nose - Table 130 - 720 mm Overhang Spindle - Column 450 mm Spindle Speed 50 - 7100 RPM, stepless Spindle Drive 10 kW Total Connected Load 20 kW Mains Connection 400 Volt, 50 Hz - CNC Control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z quill adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - threading device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shutdown via adjustable cams - 3D probe RENISHAW, Type MP 11F with FEHLMANN SF32 mount - 20 tool holders FEHLMANN SF32 Bjdpfx Ajhik Ezofwodg - swiveling tool holder with 21 tool positions - coolant system in the machine frame - control cabinet fixed to the machine - documentation: operating manual, control manual and electrical diagrams Space Required L x W x H 2350 x 2000 x 2300 mm Weight 3.2 tons very good condition

Condition: good (used), Maximum drilling diameter in steel 50 mm Minimum overhang (minimum distance of the spindle axis from the body) 450 mm Maximum overhang (max. distance of spindle axis from the body) 1600 mm Bjdsttriwopfx Afwjdg Minimum spindle speed 20 1/min Maximum spindle speed 2000 1/min

Condition: good (used), Year of construction: 1980, machine/vehicle number: 334, Offer 19194 Bjdporwl Nnofx Afwedg Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm - Right - left rotation - Projection 210 mm - Machine table 480 x 420 mm - Distance machined base plate / drill spindle 190 / 340 mm - Drive 400 V / 0.8 / 1.0 kW - Space requirement W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: good (used), Year of construction: 1983, machine/vehicle number: 7346, Offer 24016 Technical data: - Drilling capacity 22 mm - Drill spindle holder MK 2 - Drill spindle stroke 100 mm - 4 drill spindle speeds 355 - 710 - 1400 - 2800 rpm Bdsdpfxjrwmbgo Afwjg - throat depth 210 mm - Machine table 480 x 420 mm - min. /max. distance drill spindle / table approx. 190 / 340 mm - Drive 400 V / 1.1 kW - Space requirement approx. W 450 x H 1200 x D 700 mm - Weight approx. 170 kg

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Bdedpfsr D T U Djx Afweg Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: new, Tool grinding machine Manufacturer: OPTigrind Model: GH 20 T Art. No.: 3100125 Condition: New machine Speed: 5,000 rpm Clamping range: 1 - 12 mm Standard equipment: - Collets 385E, sizes 4 / 6 / 8 / 10 / 12 mm Bedoc I Tzvspfx Afwodg - Corundum cup grinding wheel - Diamond cup grinding wheel - Device for re-grinding turning tools - Device for re-grinding shank milling cutters - Device for re-grinding twist drills - Operating manual

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical specifications: Bsdpfx Ajb Ennkjfwjdg - Drilling capacity in steel 28 mm - Thread cutting device - Drill spindle mount MK 3 - Drill spindle stroke 160 mm - Table dimensions approx. 750 x 500 mm - Overhang up to approx. 620 mm - Vertical stroke of the arm 600 mm - Column diameter 250 mm - Spindle speeds in 12 steps 80 - 2800 rpm - 3 feed rates 0.1 + 0.15 + 0.25 mm/rev - Drill spindle drive 400 V / 5.5 kW - Coolant system - Space required approx. W 1100 x H 1550 - 2150 x D 950 mm - Weight approx. 1200 kg - Operating manual