Used Hardfacing Electrode (28214) for sale (440)

Condition: good (used), Flame cutting pliers, electrode pliers, hose assembly Hfodpfx Aqeb A S Avsgon -Length: 3 m Price: per piece -Quantity: 5 available -Weight: 3.5 kg/piece

Condition: good (used), Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy Hsdpfx Aqsb A Ig Djgofn -various manufacturers: -7x Elisental 1.2 mm SG-AlMg5 -1x MTC 1.0 mm AlMg5 -6x ALCAN 1.2 mm S-ALmg 5 -1x Thyssen 1.2 mm AlMg4.5Mn -Weight: 7 kg/roll Price: per piece

Year of construction: 2008, operating hours: 30,000 h, condition: ready for operation (used), Automation equipment manufactured in 2008. This KOMAX Alpha 433 L system is designed for the automatic processing of cables, including cutting, stripping, crimping, and welding. It includes a Komax ADS 123 wire storage unit, safety enclosure, extraction system, and various crimping and processing modules. If you are looking to get high-quality cable processing capabilities, consider the KOMAX Alpha 433 L machine we have for sale. Contact us for further details. Komax ADS 123 (Wire Storage Unit) • Manufacturer: Komax France • Power Supply: 3 × 400 V (3P+N) • Frequency: 50–60 Hz • Maximum Power Consumption: 5,500 VA • Air Pressure: 4–6 bar Cosmotec Cooling Unit • Manufacturer: Cosmotec • Model: XVA36 03 320 • Frequency: 50/60 Hz • Current: 0.51 A Schunk KM-CFK-564MF (Welding Module 1) • Manufacturer: Schunk • Model: KM-CFK-564MF • Year of Construction: 2012 • Rated Power (50% Duty Cycle): 120 kVA • Rated Primary Voltage: 500 V • Rated Frequency: 1000 Hz • Supply Power: 43 kVA • Secondary Working Current (50% Duty Cycle): 15.6 kA • Secondary Short-Circuit Current: 120 kA • Secondary Open-Circuit Voltage: Up to 8 V • Electrode Force: 31–187 daN • Weight: 180 kg Schunk KM-CFK-564MF (Welding Module 2) • Manufacturer: Schunk • Model: KM-CFK-564MF • Year of Construction: 2012 • Rated Power (50% Duty Cycle): 120 kVA • Rated Primary Voltage: 500 V • Rated Frequency: 1000 Hz • Supply Power: 43 kVA • Secondary Working Current (50% Duty Cycle): 15.6 kA • Secondary Short-Circuit Current: 120 kA • Secondary Open-Circuit Voltage: Up to 8 V • Electrode Force: 31–187 daN • Weight: 180 kg Scope of the system: • Komax Alpha 433 L fully automatic machine • Komax ADS 123 wire storage unit • Safety enclosure Hedpfxozg Hm Ue Aqgjfn • Extraction system (AAT 260) • Operating computer and control unit • Various crimping and processing modules, optional • Further optional accessories available upon request Used for: • The system is in working order and has been used for the automatic processing of cables, including cutting, stripping, crimping and welding • All systems are currently still powered and fully functional • Approximately 30,000 machine hours

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 755 mm, travel distance W-axis: 500 mm, number of slots in tool magazine: 54, TECHNICAL DETAILS Type: CNC EDM Drilling Machine Travel in X-axis: 600 mm Travel in Y-axis: 500 mm Travel in Z-axis: 755 mm Travel in W-axis: 500 mm W-axis type: Servomotor Electrode length: 800 mm Drilling diameter: from 0.10 mm MACHINE DETAILS Width: 1,975 mm Depth: 1,445 mm Height: 2,280 mm Height: max. 2,785 mm EQUIPMENT Electric changer with 18 stations Electric changer with 36 stations Automatic electrode and guide changer Breakthrough detection CAD import with intuitive touch operation Detection of the holes by color code Automatic wear compensation Blind hole machining with depth control 3-stage discharge control Hfjdpfszhnigox Aqgon Thread erosion for hardened materials M3 - M16 Generator Power Booster for large diameters Indexing axes, 1 and 2 axes available Large water tank with 175 liters and filter system Drilling depth measurement Automatic electrode check

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, table width: 650 mm, For sale are 2 OPS Ingersoll EDM machines, model Gentry Eagle 500. The machines are being sold from a production facility, are in very good condition, and fully functional. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: By arrangement Travel paths: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm with Erowa) C-axis: controlled (0.001 mm resolution) Electrode holder (quill): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16m² paper candle - Compressor - Recooling unit - Liftable tank with automatic tank refilling (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Footprint: 3,135 x 3,944 x 2,871 mm Options: - Pallet holder for four Power-Grip160 (not included in price) Hedpfx Ajxrpm Ujqgjfn - Various 4-fold aluminum exchange pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional cost upon request. Prices plus VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options please visit our website.

Year of construction: 2014, condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 600 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 500 mm MAX ELECTRODE WEIGHT: 50 Kg MAX  PIECE WEIGHT: 2000 Kg MAX PIECE SIZE: 1200 x 800 x 350 mm TANK SIZE: 1280 x 850 x 390 mm CONTROL UNIT: VISION 5 WEIGHT: 5500 Kg OVERALL DIMENSIONS: 1800 x 2900 x 3200 mm ACCESSORIES: C-AXIS Hfsdpfxeyy Th Ie Aqgsn NOTE: POSSIBILITA' DI AGGIUNTA MAGAZZINO CAMBIO ELETTRODI.

Condition: ready for operation (used), Year of construction: 2012, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 390 mm, total height: 2,580 mm, total width: 1,900 mm, overall weight: 2,100 kg, product length (max.): 2,700 mm, number of axes: 5, This 5-axis TOPEDM TSH-400T CNC EDM Spark Erosion Hole Drilling Machine machine was manufactured in 2012. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 390 mm. The machine includes a stainless steel table size of 480 × 458 mm and an automatic electrode changer with 21 positions. If you are looking to get high-quality spark erosion hole drilling capabilities, consider the TOPEDM TSH-400T Spark Erosion Hole Drilling Machine EDM we have for sale. Contact us for further details. Hjdsy T Savepfx Aqgjfn • Machine head travel: 310 mm • Stainless steel table size: 480 × 458 mm • Work tank size: 670 × 930 × 330 mm • Max. distance between guide unit and worktable: 315 mm • Electrode diameter: Ø0.15 – Ø6.0 mm • Submersible tank: Yes • Dielectric system: Pressure and deionization control • Max. machining current: 50 A • Max. power consumption: 5 kVA • Electrical data: 380 V, 50/60 Hz, 14.6 A Additional equipment • Automatic Electrode Changer (AEC), 21 positions • Automatic Guide Changer (AGC), 5 guides

Condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 400 mm Hfodpfxeyvlxws Aqgsn Y-AXIS TRAVEL: 300 mm MAX ELECTRODE WEIGHT: 100 Kg MAX  PIECE WEIGHT: 800 Kg MAX C-AXIS WEIGHT - STATIC/DYNAMIC: 50-10 Kg MAX PIECE SIZE: 220 x 400 x 220 mm TANK SIZE: 900 mm TABLE SIZE: 550 x 400 mm TOOL MAGAZINE: 5 POS CONTROL UNIT: TECHNO 60 WEIGHT: 3000 Kg

Condition: like new (used), Year of construction: 2020, Power at 50%: 25kVA Short circuit-current: 18kA Electrode force: 240daN Throat depth: 230-550mm Hfjdpfx Ajzgxfisqgjn --- Weld control: TE101 (13-parameters, 99-program) --- Extra Equipment: - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 1,000 kg, workpiece length (max.): 760 mm, workpiece width (max.): 450 mm, workpiece height (max.): 255 mm, overall weight: 4,000 kg, Wire EDM machine GF AgieCharmilles Spirit 3 Year of manufacture: 2008 Travel ranges (X/Y/Z): 550 x 400 x 350 mm Max. workpiece dimensions: 760 x 450 x 255 mm Max. workpiece weight: 1000 kg Distance table - quill: 170-520 mm Bath level up to 295 mm Includes pneumatic chuck of the 3R system or Erowa ITS 50, selectable Includes 10-position electrode changer in the magazine Max. electrode weight: 50 kg Includes C-axis with U=0-40 RPM Total weight (without dielectric fluid): 3300 kg Dimensions: 2800 x 2800 x 2690 mm Hjdpfx Aqszcawmegofn After receiving your order, we will clean, service, and test the machine. You will then receive a 6-month warranty on the machine. We would be happy to provide you with free training on the machine at our facility. We would also be pleased to offer you the following additional services and products: - Commissioning - Transport - On-site training - Clamping devices - Dielectric fluid - Cooling unit

Condition: excellent (used), Year of construction: 2024, operating hours: 142 h, functionality: fully functional, machine/vehicle number: 395.900.219.1428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, total height: 2,858 mm, total width: 1,600 mm, total length: 2,845 mm, table width: 800 mm, table length: 400 mm, workpiece length (max.): 1,000 mm, workpiece height (max.): 400 mm, input voltage: 400 V, overall weight: 4,050 kg, year of last overhaul: 2026, Equipment: documentation/manual, For sale: AGIE CHARMILLES FORM E 600 EDM sinker machine (2024) We offer an AGIE CHARMILLES FORM E 600 EDM sinker machine from 2024, in very good technical and visual condition. Machine specifications: Manufacturer: AGIE CHARMILLES Model: FORM E 600 Year of manufacture: 2024 Type: EDM (electro-discharge machining) sinker machine Hsdozclpnopfx Aqgjfn Equipment: FORM E 600 sinker EDM center - System 3R Macro electrode holder - Automatic 6-position electrode changer - High-speed C-axis - Heat exchanger - EMC/CE compliant version - Set of reference balls - Chiller - SPD surge protection system - System 3R 3R-656.21-SP03 measuring probe with a Ø 3 mm measuring ball - System 3R-628.31-S starter kit - Set of transport locks The machine is ready for operation and is an excellent solution for demanding applications in electro-discharge machining. We provide assistance with machine loading. If you have any questions or would like to obtain additional information, please contact us by phone or email.

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Hsdoy N Dukepfx Aqgjfn Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² Hfsdpfx Aqjzn N Ecogsn o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Condition: used, Spot welding machine, projection welding machine, NIMAK Type PMP 5 / 35 Hfedpshubgzsfx Aqgon Manufacturer's number: 88100, Year of manufacture: approx. 1988 Power at 50% duty cycle: 35 kVA Reach: 250 - 450 mm Working stroke: 40 mm Electrode force: 100 - 460 kp, steplessly adjustable Electrode force at 6 bar: 460 daN Operating air pressure: 2 to 6 bar Electrode arm: Ø 60 mm Electrode holder: Ø 30 mm Insert electrodes, cone: MK 2, Ø 17.78 mm Arm distance: 200 / 400 mm Adjustability of the electrode holder: 200 mm Connected load: 83 kVA Mains connection: 380 Volt, 50 Hz - 4-cycle control - Stepless power adjustment - Single-point and multi-point welding - Parallel electrode guidance - Water-cooled (without cooling unit) - Electric foot switch Space requirement L x W x H: 1200 x 650 x 1500 mm Weight: 300 kg Good condition

Condition: new, Year of construction: 2024, Handheld laser welder LWH-1000-N Gefasst SUP 20S The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 1000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 230 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Gefasst SUP 20S laser head - Welding and cutting Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications Hfedpfxehufigo Aqgen 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: used, Capacitor discharge welding machine MEGATRONIC, type CD-1200 / QB 2 / 6P Capacitor discharge welding with high currents and minimal welding times. Spot and projection welding machine The CD (Capacitor Discharge) welding technology works according to the principle of transformed capacitor discharge. Year of manufacture: 1993 Very high welding performance with a relatively small mains connection. Hfsdpfx Aqjguvtdogsn - very short welding times, welding process with current rise and high welding current in milliseconds - no distortion or annealing - no significant heating of the edge areas, ideal for heat-sensitive components - welding of steels with high carbon content - welding of surface-coated workpieces Rated power: 12288 Ws Uc: 3200 Volt Capacity: 2400 µF Open-circuit voltage: 10 Volt Electrode force: 200-2000 daN, continuously adjustable Operating air pressure: 6 bar Mains fuse: min. 35 Amp. Operating current: 32 Amp. Mains connection: 400 Volt, 50 Hz - Programmable control unit megapuls CD-12000 - Parallel electrode guidance - Electrical 2-hand control panel located beside the machine - Control cabinet with control unit fixed to the machine Weight: 3000 kg Good condition

Condition: used, Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg -Number: 2x package available -Price: per package -Weight complete: 15.6 kg/package Hjdpfscbki Tex Aqgefn

Condition: used, Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x packages available Hfedpfxochp Awj Aqgon -Price: per package -Weight: 7.6kg/package

Condition: used, wire electrode, welding wire, welding wire -Cored wire: Fluxofil 31 -Diameter: 1.6mm Hfedpfx Asd N Apusqgon -Dimensions: O 300/100 mm -Weight complete: 15 kg

Condition: good (used), Year of construction: 2003, machine/vehicle number: 18220203, System for automated robot welding Mains voltage:3 x 400 V Mains voltage tolerance:+ /- 15 Mains frequency:50 / 60 Hz Mains fuse protection:35 A slow-blow Primary continuous current:18 - 29.5 A - 100 duty cycle Primary continuous power:13.1 kVA Power factor:0.99 Efficiency:0.9 Welding current range:MIG/MAG: 3-500 A Rod Electrode: 10-500 A TIG: 3-500 A Welding current:40 duty cycle: 500 A 60 duty cycle: 450 A Hfjdoqpgntepfx Aqgjn 100 duty cycle: 360 A Welding voltage range:MIG/MAG: 14.2 - 39.0 V Rod electrode: 20.4 - 40.0 V TIG: 10.1 - 30.0 V Max. Welding voltage:49.2 V Open circuit voltage (OCV):70 V Dimensions (mm) H x W x D:626 x 287 x 477 mm Weights:35.6 kg Included in the scope of delivery: Power source on steel platform (RS 422 interface) Cooling unit (FK 4000-R) Fronius VR 1500 4R/W/E robot wire feed case Supply voltage 55 V DC Rated current 4 A Wire diameter 0.8 - 1.6 mm 0.03 - 0.06 in. Wire speed 0.5 - 22 m/min 19.69 - 866.14 ipm. Torque 4 Nm Protection class IP 21 Dimensions I x w x h 405 x 208 x 205 mm 15.94 x 8.19 x 8.07 in. Weight 7 kg 15.43 Ib. Drive 4 roller drive Maximum shielding gas pressure 7 bar 101 psi. Coolant Original Fronius coolant Maximum coolant pressure 6 bar 87 psi. Welding torch Robacta Drive W/E/6.25m Hose package 6.5m Various wearing parts (e.g. pipe bends, gas nozzle, contact pieces) Suction unit with hose guide

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. Hfodpfx Aqouu Rthegon All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: used, wire electrode, welding wire, welding wire -Gas wire electrode: roll started -Type: 308L Ø 0.8 mm -Dimension: Ø 300/100 mm Hsdpfx Ajimd S Ajqgsfn -Weight reel: 9.3 kg

Condition: used, Inverter welding machine for manual arc welding, TECHNOLIT Type PROFImat 170 Plus MMA welding machine, inverter welding machine, manual arc welding inverter New - unused Serial No.: TB1703500316 Article No.: 440030 Year of manufacture: 2022 Output WIG (DC) 170 amps, 45% duty cycle 150 amps, 60% duty cycle 135 amps, 100% duty cycle Output manual arc welding 170 amps, 35% duty cycle 145 amps, 60% duty cycle 125 amps, 100% duty cycle Adjustment range 5-170 amps, continuously adjustable Mains connection 230 volts, 50 Hz - Hot-start function (optimizes ignition behavior, simplifies starting the welding process for electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents possible sticking of the electrode) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition Hfodpfx Aei E Iz Ijqgsn - Stick electrode welding, suitable for all electrode types up to Ø 4 mm - Ground cable with plug connection - Electrode holder with 3-meter cable and plug connection - Equipped with a 230-volt Schuko plug - S-mark for welding under increased electrical hazard - Overvoltage protection Dimensions (device without cable) L x W x H 310 x 155 x 265 mm Weight (without cable) 7 kg NEW - unused, from stock

Condition: used, machine/vehicle number: 1A50129320, wire diameter 1.2 mm weight 216 kg non-copper-plated wire electrode of quality G3Si1 for MAG welding Hsdstyq E Njpfx Aqgjfn

Condition: used, Spot and projection welding machine NIMAK type BMP 20/150 Spot welding machine, projection welding machine Mach. No. 81692 year of manufacture approx. 1980 Power at 50% duty cycle 150 kVA Clamping plate below 200 x 160 mm Clamping plate above 200 x 160 mm Power setting continuously variable Max. projection 150 mm Electrode force 200 - 2000 kp continuously variable Hjdpfev Dxm Sjx Aqgofn Operating air pressure max. 6 bar Connection power 600 kVA Mains connection 380 volts, 50 Hz - Welding control DTW 4Z 2P - Single spots and series spots - Parallel electrode guidance - Water-cooled without cooling unit - Electric 2-hand control panel with emergency stop - Control cabinet with control permanently attached to the machine Space requirement L x W x H 1000 x 800 x 1800 mm Weight 900 kg good condition