Used Hermle Uwf 801 6995 for sale (486)

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment Fodpfeylw Stjx Aagsph • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, number of axes: 3, This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine. Machine Benefits Fjdpfxsyarzre Aagjph Technical Machine Benefits • Operating voltage: 400 v / 3-phase / 50 hz • Control voltage: 24 v • Total current: 44 a • Magazine for 30 tools, sk40. Extra Information Machine still under power

Condition: good (used), Year of construction: 1999, functionality: fully functional, Control: Heidenhain TNC 426/410M Spindle taper: SK 40 (or ISO 40) Max. spindle speed: 7,000 rpm Fpodeyr Ez Ajpfx Aagjh Table clamping surface: approx. 900 x 528 mm Travel paths (X/Y/Z): 630 mm / 500 mm / 500 mm Max. table load: 400 kg Tool changer: 16-position magazine Machine weight: approx. 4,800 kg Travel paths (X/Y/Z): 630 mm / 500 mm / 500 mm

Condition: ready for operation (used), Year of construction: 2003, Make: HERMLE Type of machine: C 800 U Year of manufacture: 2003 Control system: Siemens 840D Machine's weight: 9.000,- Fpsdpfjtmtxmjx Aagsh Tool holder: SK40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 16.000 min-1 Number of tools in the magazine: 80 Pl.

Condition: ready for operation (used), Year of construction: 1999, Make: HERMLE Type of machine: C 800 V Year of manufacture: 1999 Control system: Heidenhain 430 Machine's weight: 7000 kg Tool holder: SK 40 x-travel: 800 mm y-travel: 600 mm z-travel: 500 mm Speed range: 8 000 min⁻¹ Fpjdpfxjyfgtaj Aagsh Table dimensions: 1000 × 560 mm Number of tools in the magazine: 30 Pl.

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Fpedpfxeyrirrs Aagsh Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40

Condition: excellent (used), Year of construction: 2010, Heidenhain iTNC 530 control Travel paths X/Y/Z: 1200 x 900 x 500 mm Spindle speed: 16,000 rpm Tool magazine for 30 tools + additional magazine for 57 tools, HSK-A 63 Fjdpsynw Erjfx Aagoph Internal coolant supply 40 bar Chip conveyor Heidenhain measuring probe Blum laser system

Condition: excellent (used), Year of construction: 1998, x-travel 800 mm y-travel 600 mm Fodpjx Dndcjfx Aagsph z-travel 500 mm

Condition: excellent (used), Year of construction: 2000, Two Hermle C 800 V machining centres for sale. Hermle C 800 V Year of manufacture: 2000 Control: Heidenhain TNC 430 Technical specifications: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Table clamping surface: 1000 x 560 mm Max. table load: 1000 kg Fsdpfxoylkzzo Aagjph Distance spindle/table: 100–500 mm Spindle speed: 8000 rpm SK40 30 tool changer positions

Year of construction: 1997, condition: ready for operation (used), X-travel: 630mm, y-travel: 500mm, z-travel: 500mm, table diameter: 900x528mm, NC rotary table diameter: 500mm, connected load: 14kVA, length: 3600mm, width: 3900mm, height: 2100mm, weight: 6t, with documentation. Fpjdpjlc N Stsfx Aageh

Condition: good (used), Year of construction: 2005, operating hours: 108,310 h, functionality: fully functional, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Year of manufacture: 2005 Heidenhain iTNC 530 Machine ON: 108,310 h, Spindle ON: 34,700 h - Milling head manual swivel/clamp - Main spindle 18,000 rpm - SK 40 - 16 tool positions - Rotary/angle table Fsdsyhv Eqepfx Aagjph - Standard coolant system - Chip tray - Observation windows - German documentation - Heidenhain measuring probe - Electronic hand control module - Chip flushing gun - Air blow-off device - Central blow air - U 740 with fixed table

Condition: ready for operation (used), Year of construction: 2003, operating hours: 27,804 h, functionality: fully functional, machine/vehicle number: 16165, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis travel: 915 mm Fpedpjyhnudofx Aagoh Y-axis travel: 500 mm Z-axis travel: 500 mm Number of axes: 5 Maximum spindle speed: 12,000 rpm Table length: 900 mm Table width: 500 mm Number of T-slots: 8 T-slot spacing: 65 mm T-slot width: 14 mm Maximum workpiece weight on table: 700 kg Maximum workpiece length: 900 mm Maximum workpiece width: 500 mm Maximum workpiece height: 500 mm Number of tools: 16 Maximum tool diameter: 125 mm Diameter with adjacent pockets empty: 180 mm Maximum tool length: 300 mm Maximum tool weight: 6 kg Tool holder: SK 40 Milling head swiveling range: -5° to +95° Rapid traverse: Longitudinal: 30 m/min Cross: 30 m/min Vertical: 20 m/min MACHINE SPECIFICATIONS Compressed air connection: 6 bar Electrical connection: 50 Hz, 3 x 400 Volt Spindle drive power: 32 kW Total power requirement: 26 kVA Noise level: 78 dB (A) Dimensions & Weight Dimensions (L x W x H): 2,760 x 2,390 x 2,370 mm Machine weight: approx. 7,300 kg Operating Hours Power-on time: 86,672 h Operating time: 34,362 h Spindle run time: 27,804 h EQUIPMENT 3-jaw chuck Ø 200 mm Workpiece probe HEIDENHAIN TS 640 Rotary table 4th axis HOFMANN type RW/NC-160 Rinsing gun RS 232 interface Ethernet interface Electrical cabinet air conditioning unit

Condition: new, Year of construction: 2025, operating hours: 671 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: Heidenhain TNC7, workpiece weight (max.): 1,100 kg, table width: 800 mm, table length: 616 mm, rotational speed (min.): 20 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Heidenhain TNC7 Spindle HSK-A63 16,000 rpm 30 tool positions Rigid clamping table 800x616 Internal coolant supply 40 bar with paper band filter Scraper belt conveyor Handwheel BLUM LC53-Digilog for tool breakage detection/measurement Touch probe BLUM TC Machine ON: 671 h Spindle ON: 61 h Machine is approx. 6 months old. Fpsdsyf E Atspfx Aageh Offered for sale on behalf of customer. Inspection possible by prior arrangement.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 2,466 h, functionality: fully functional, machine/vehicle number: 13147, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle Speed range: 20 – 12,000 rpm Tool holder: SK40 Table Dimensions: 1,000 x 560 mm Tool magazine: 30 positions MACHINE DETAILS Weight: 7,000 kg Spindle hours: 2,466 h Fpedpfx Aow Nqh Asagoh Machine operating hours: 34,485 h Power: 15 kW (at 40% duty cycle) Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V Total rated current: 44 A EQUIPMENT Chip tray Heidenhain TNC430 control Heidenhain touch probe system Extraction unit Electronic handwheel

Condition: good (used), Hermle Centrifuge Z 200 A Small Centrifuge A compact centrifuge for doctors and clinical laboratories. The Z 200 A takes up to 12 x 15 ml tubes with conical and round bottom. Specifications . Volume: max. 12 x 15 ml / 6 x 50 ml. Speed: max. speed/RCF: 6000 rpm / 4185 xg min. Speed/RCF: 250 rpm / 7 xg Speed range: 250 - 6000 rpm Speed setting: knob-controlled in 250 rpm steps Speed display: preset and actual speed - digital Running time: max. time: 30 min. / continuous run min. time: 0.5 min. Preselection: 0.5 - 30 min. / "Contin. Time setting: by push-button 0.5 min. increments Time display: remaining time - digital Brake: fixed braking force with soft stop Features: microprocessor-controlled - Microprocessor-controlled - DC motor, covered - ABS plastic housing shock and chemical resistant Safety: - Lid locking system - automatic unbalance indicator with safety cut-off - manufactured according to IEC 1010, UVV VBG 7z Dimensions (cm / inch): Width: 28 / 11.0 height: 26 / 10,2 Depth: 37 / 14.6 Weight: 15 kg / 33.0 lbs Power consumption: 180 W Fpodpfjm Albdex Aageh Item condition: used, top condition You can find more centrifuges - new and used - in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,702 h, functionality: fully functional, machine/vehicle number: 16261, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 840 D pl , spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Travel Paths X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Spindle speed range: 20 – 28,000 rpm Spindle drive power: 23 / 18 kW Max. torque: 79 Nm Tool taper: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed A: 25 / C: 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Max. tool length: 300 mm Feed Rates Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN MACHINE DETAILS Control: Siemens Sinumerik 840 D pl Space Requirement & Weight Required space approx.: 8.5 x 5.5 x 3.0 m Machine weight approx.: 10,500 kg Total power requirement: 43 kVA Operating hours: 48,702 h EQUIPMENT - Documentation - High-pressure cooling - Coolant system - Internal coolant supply: 80 bar / 1,300 l Fedsxbz A Hjpfx Aagjph - Electronic handwheel - Fully enclosed cabin - FASTEMS pallet pool / 15 positions - Chip conveyor - Paper band filter - Renishaw probe - Tool breakage monitoring Note: Transport lifting gear must be provided by the buyer. The pallet system cannot be observed under power. The Fastems controller is defective.

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 12644, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 15,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned as part of a business liquidation. Bids are binding and require timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel distances Travel distance X-axis: 1,200 mm Travel distance Y-axis: 900 mm Travel distance Z-axis: 500 mm Spindle Minimum distance from working spindle to top edge of table: 180 mm Maximum distance from working spindle to top edge of table: 680 mm Milling spindle diameter at front bearing: 70 mm Spindle speed: 15,000 rpm Tool holder: HSK A63 Feed Fjdpfxexqfzrs Aageph Feed rate X-axis: 1 – 3,000 mm/min Feed rate Y-axis: 1 – 3,000 mm/min Feed rate Z-axis: 1 – 3,000 mm/min Work table Table dimensions: 1,400 x 900 mm Number of T-slots: 14 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Electrical data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 31 A Connected load: 45 kVA Dimensions & weight Dimensions (L x W x H): 6,000 x 3,200 x 2,900 mm Weight: 12,000 kg EQUIPMENT 30-position tool changer Measuring probe Tool holders in the tool changer Note: Transport can be carried out on a truck up to 3,000 mm width.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 26,863 h, functionality: fully functional, machine/vehicle number: 12803, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: HEIDENHAIN TNC 430, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding constitutes an obligation for timely collection between 01.12.2025 and 05.12.2025! Fsdpjxnkfkofx Aageph TECHNICAL DETAILS Travels Travel X: 600 mm Travel Y: 450 mm Travel Z: 450 mm Feed range in X: 1–2,000/3,0000 mm/min Feed range in Y: 1–2,000/3,0000 mm/min Feed range in Z: 1–2,000/3,0000 mm/min Rapid traverse in X axis: 35 m/min Rapid traverse in Y axis: 35 m/min Rapid traverse in Z axis: 35 m/min Clamping table surface: 800 x 465 mm Max. spindle speed: 12,000 rpm Measuring system resolution: 0.1 µm Input unit measuring system: 0.1 µm Display increment measuring system: 0.1 µm MACHINE DETAILS CNC control: HEIDENHAIN TNC 430 Dimensions & Weight Dimensions (L x W x H): 2800 x 2100 x 2700 mm Weight: 6,700 kg Operating hours Spindle hours: 26,863 h CNC controller operation hours: 81,084 h EQUIPMENT Individual feed motors for each axis – three-phase (brushless) Note: The clamping devices (vices, chucks, etc.) mounted on the worktable are not included in the scope of sale or delivery. The machine is offered without tool holders and tools.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 20,222 h, functionality: fully functional, machine/vehicle number: 14631, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 16,000 rpm, spindle diameter: 70 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances Travel range X-axis: 800 mm Travel range Y-axis: 600 mm Travel range Z-axis: 500 mm Rapid traverse in X, Y, and Z axes: 35 m/min Max. spindle speed: 16,000 rpm Clamping table surface: 1,000 x 560 mm Spindle taper: HSK A63 (DIN 69063) Spindle diameter at front bearing: 70 mm MACHINE DETAILS Control: HEIDENHAIN TNC 430 Fsdpfx Aaexnkwgogsph Dimensions & Weight Dimensions (L x W x H): 3,300 x 2,400 x 3,000 mm Weight: 7,000 kg Coolant tank capacity: 300 l Operating hours Spindle hours: 20,222 h Power-on hours: 49,977 h EQUIPMENT 3D probing system Technical documentation Note: The mounting plate currently fixed on the worktable, as well as tool holders and tools, are not included in the scope of delivery or sale.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] Fpodeup Hw Eepfx Aagjh EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller manufacturer: Heidenhain, table width: 480 mm, table length: 900 mm, overall weight: 7,300 kg, Equipment: documentation/manual, TECHNICAL DETAILS Fixed table: 900 x 480 mm MACHINE DETAILS Control: HEIDENHAIN Electrical Data Net weight: 7,300 kg Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total power: 26 kVA Total rated current: 37 A Fpodpfoxl Sunox Aageh Weight: 6,300 kg EQUIPMENT Tool changer

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 1,000 mm, table length: 560 mm, TECHNICAL DETAILS Travel distances x-axis travel: 800 mm y-axis travel: 600 mm z-axis travel: 500 mm Table Clamping surface: 1,000 × 560 mm Spindle Milling spindle speed: 10,000 rpm Tool holder – diameter: SK40 mm Fpsdswynucepfx Aageh Control CNC control: TNC430 Tool magazine Number of tools: 30 MACHINE DETAILS Electrical data Total power requirement: 35 kW Weight and dimensions Machine weight: approx. 8.50 t Space requirement: approx. 2.90 × 3.50 × 3.00 m EQUIPMENT Swivel vice integrated into the left side panel with counter bearing (controlled 4th axis) Centre height 160 mm / centre width 500 mm Wireless measuring probe MP10 Chip tray with coolant pump

Condition: excellent (used), - Model: Omega 1 - Serial number: 13770392 - Dimensions: 2200x2600x1420 mm - Track width: 800 mm - Track depth: 1630 mm - Baking chamber height: 235 mm - Baking area: 6.6 m2 Fedpfx Aowxmp Ajagoph - Footprint: 3.7 m2 - Number of decks: 5 - Heating power: 65.2 kW - Voltage: 400V - Frequency: 50Hz - Maximum temperature: 300 °C - Year: 2008 - Oven weight: 2070 kg - Loading elevator included - Refurbished equipment: The unit is prepared on order; pick-up and return dates are defined at that time (please request price after refurbishment). The listing was translated automatically. Translation errors are possible.

Condition: used, - Dimensions LxWxH: 1441x2830x2682mm - Deck dimensions: 800x1800mm - Baking surface: 5.8m² - Without integrated loader or proofer - 4 ports - 4 decks - Ergocom control, 1 control per deck - Voltage: 400V - Power: 32.8kW - Weight: 1797kg - Top and bottom decks: 20mm thick refractory material on the sole - ROC orion EvO deck 1x800mm - Sole and vault in 20mm thick refractory material, 13mm refractory tiles on sides - Interior lighting - High-performance stainless steel heating elements - Integrated heating element protection system in the vault - Independent steam device with water doser for each deck Fpsdpow Imi Hjfx Aagjh - Pressure reducer - Steam distributed from the rear of the baking chamber, "anti-splash" water diffuser for bread.

Condition: good (used), mileage: 801,813 km, power: 266 kW (361.66 HP), first registration: 01/2015, fuel type: diesel, tire size: 315 / 70 / R22.5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 10,000 mm, total width: 2,600 mm, total height: 3,650 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, soot filter, spoiler, tail-lift, Technical information Number of cylinders: 5 Engine capacity: 9.291 cc Transmission Transmission: Scania, 12 gears, Automatic Axle configuration Tyre size: 315 / 70 / R22.5 Make axles: Scania Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 11.285 kg Carrying capacity: 7.715 kg GVW: 19.000 kg Functional Tail lift: Dhollandia DHSV.20, slider lift, 2000 kg Interior Interior: grey History Number of owners: 1 Condition Technical condition: good Visual appearance: good Fsdpfx Aaoza Ui Ejgjph Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Low-noise - Particulate filter - Radio, MP3 enabled - Radio/CD player - Speed limiter - Spoilers - Stability control - Visor