Used Hoesch Hegenscheidt Mfd Wheel Set Press 250 Ton for sale (46,841)

Condition: good (used), pressing force: 100 t, total width: 3,000 mm, Manufacturer: AMADA Bjdpfjvwcduox Aphjdf Type: HFE 100-3L + ASTRO 50Y Control: Operator Year of manufacture: 2007 Long stroke CNC Press brake 8 Axis controlled ASTRO 50Y AMADA Robot ASTRO 50 Y bending cell is composed of an HFE Pressbrake associated with an 7-axis robot. When machining medium / fine thick and large dimension parts. Machine turns out to be highly polyvalent thanks to a 4-m long linearaxis and numerous grippers. Programming has become particularly easy through EASY CAM software Safety CE Fence around machine and tobot Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) Length 8000mm Width 4000mm Please note: The information on this page is correct to the best of our knowledge and belief, and where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: used, Single-column hydraulic press, MAE Type S63SZ SO . 551277, year of manufacture approx. 1977 Nominal pressing force 63 tons. Pressing force: 50 tons (practically tested) Bdjdpfxsdzp Trs Aphof Overhang 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Maximum installation height approx. 730 mm Table height above floor 970 mm Hydraulic tank capacity 600 liters Drive power 15 kW Mains connection 380 volts, 50 Hz - Hydraulic draw cushion under the table with holes through the table top - 2-hand operation - Electrical control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 tons. The machine is functional, but the control cabinet is mechanically damaged. During a test run, the machine achieves a pressing force of 50 tons; presumably, a pressure relief valve is releasing.

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: Bdsdsry Trpepfx Aphef H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data: AD-R 60400 Bending force: 400 tons Bending length: 6050 mm Distance between uprights: 5100 mm Stroke: 365 mm Installed height: 630 mm Bodpfxefin Hwe Aphjdf Throat depth: 510 mm Optional throat depth: 750 mm | 1000 mm | 1250 mm Table height: 1220 mm Table width: 154 mm Y-axis rapid traverse: 120 mm/sec. Y-axis working speed: 8 mm/sec. Y-axis return speed: 100 mm/sec. X-axis working speed: 250 mm/sec. R-axis working speed: 140 mm/sec. R-axis travel: 250 Motor power: 37 kW Length: 7500 mm Width: 2110 mm Height: 3710 mm Weight approx. 35 tons With over 60 years of experience in the research and production of machines for sheet metal processing, and with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in their industry, with products distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center offers you the opportunity to gain an overview of our machines on-site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to offer you services related to training and customer support. We would now like to support you from Germany – from consulting, through purchasing, and throughout the entire life cycle of your machine. With our German branch, we are always there for you locally, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Year of construction: 2024, condition: new, AD-S 40400 PLATE BENDING MACHINE Bending force / Bending capacity tons: 400 Bending length / Bending length mm: 4050 Distance between columns / Distance between columns mm: 3400 Y rapid traverse speed / Rapid traverse speed mm/sec: 100 Y working speed / Working speed mm/sec: 8 Y return speed / Return speed mm/sec: 80 Crowning / Crowning: Motorized Daylight / Tool clearance and penetration depth of the bending machine mm: 630 Table width / Table width mm: 300 Table height / Table height mm: 1040 Stroke / Stroke mm: 365 Throat depth / Throat depth mm: 510 Support arms / Support arms: 2 Back gauge finger blocks / The back gauge is standardly equipped with two finger blocks: 2 Speed of travel in X-axis / Press force and speed of the bending machine. X-axis mm/sec: 350 Travel in X-axis / X-axis travel direction mm: 750 Bedjd Rlk Hjpfx Aphodf Speed of R-axis (max.) / Speed of R-axis (max.) mm/sec: 300 Travel in R-axis / R-axis travel direction mm: 250 Motor power / Motor power kW: 37 Oiltank capacity / Oil tank capacity liters: 450 Length / Length mm: 5750 Width / Width mm: 2110 Height / Height mm: 3540 Weight approx. / Weight approx. kg: 27760 X=650mm X, R, Z1, Z2, /AL CE with manual F. Akas ll M-FPSC-B-C (SAFETY PLC) Upper tool: Durma Lower tool: Durma Central clamping: Motorized Price excludes transport and commissioning. We look forward to hearing from you.

Year of construction: 2024, condition: new, SPECIAL OFFER: Press brake AD-S 1260 Length/Width/Height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons Bending length: 1250 mm Distance between stands: 1050 mm Stroke: 160 mm Installation height: 530 mm Overhang: 450 mm Table height: 900 mm Table width: 104 mm Y rapid traverse: 200 mm/sec. Y working speed: 10 mm/sec. Control: CYBELEC MODEVA 19T touchscreen CE compliant with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) European upper tool: P97.75.R08 (one of them is split) European lower tool: M.460R.85 (one of them is split) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC-controlled motorized crowning 60mm die holder (only for European dies) Overhang 410 Bsdpfx Apod R Dhpehsdf Adjustable support arms at the front with T-slot, strip stop and guide along the entire length Rear stop: Siemens DC servo motor & linear guide & ball screw system Support arms: 2 pcs Stop fingers: 2 pcs With foot pedal Oil capacity: 100 l Price is valid ex Staufenberg. The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2024, condition: new, Manufacturer: DURMA Type: AD-R 40400 Year of manufacture: NEW Bending length: 4050 mm Distance between uprights: 3400 mm Stroke: 365 mm Installation height: 630 mm Overhang: 510 mm Table height: 1050 mm Table width: 154 mm Y-axis rapid traverse: 140 mm/sec Y-axis working speed: 8 mm/sec Y-axis retraction speed: 120 mm/sec X-axis working speed: 250 mm/sec R-axis travel: 250 Motor power: 37 Length: 5750 mm Width: 2110 mm Height: 3540 mm Weight: approx. 25000 kg Standard equipment: Control system: CNC Cybelec ModEva 19T CNC-controlled motorized crowning European tool clamping system / or Durma clamping system on customer request Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes of the rear stop: X1, X2, R1, R2, Z1, Z2 Control system: DELEM DA-66T Delem 66T – 69T or Durma control system can be selected DAM – Durma angle measuring system Hydraulic upper tool clamping Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic lower tool clamping Wila NSCR-I-HC-CNC/UPB – PRO Power pack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 bending assistance 750 mm to 1500 mm selectable Parking area for support arms (1000 mm) TANDEM preparation Bdjdpfx Aed Hy Hujphsf Laser bending line Oil heating Central lubrication, manual or motorized Air conditioning for the control cabinet Further machines are available for demonstration at our location in Staufenberg. Upon request, we will gladly provide you with further information.

Year of construction: 2024, condition: new, Length/Width/Height: 3200mm/1550mm/2750mm Weight: 3550 kg Bending force: 60 tons Bending length: 2050 mm Distance between the uprights: 1700 mm Stroke: 265 mm Installation height: 530 mm Overhang: 410 mm Table height: 900 mm Bsdpsfgz U Sofx Aphsdf Table width: 104 mm Y rapid traverse: 200 mm/sec. Y working speed: 10 mm/sec. Control: CYBELEC MODEVA 19T touchscreen CE compliant with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) European upper tool: P97.75.R08 (one of which is split) European lower tool: M.460R.85 (one of which is split) Manual quick clamping Y1, Y2, X, R (4-axis) X=650mm X,R CNC-controlled motorized crowning 60mm die holder (only for European dies) Overhang 410 Adjustable front support arms with T-slot, stop, and guide along the entire length Rear stop: Siemens DC servo motor & linear guide & ball roller system Support arms: 2 pieces Stop fingers: 2 pieces With foot pedal Oil capacity: 100 l Price is valid ex works Staufenberg. The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by appointment. Other machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Year of construction: 2024, condition: new, Axes: Y1, Y2, X, R Control: Delem 66 T or 69 T (selectable) CE standard with manual Fiessler AKAS II M -FPSC-B-C + safety cover & switch Bjdpsfin Hcefx Aphodf Durma upper tool Durma lower tool CNC-controlled motorized crowning Overhang: standard 510 mm or selectable 750 mm, 1000 mm Back gauge: motorized & linear guide & ball bearing system Back gauge fingers: height-adjustable Back gauge motor: AC type Adjustable support arms with linear guide along the entire length Technical data available upon request.

Year of construction: 2024, condition: new, Everything can be configured to your specifications, with very short production and delivery times. Upon request, we will be happy to provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front supports for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, in accordance with globally applicable standards Bedpfx Apofiqdcohedf Electrical equipment, in accordance with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional front sheet metal support system, sliding Special sea packaging 8-meter press brake, 320 tons. Bilk9emkq3 With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice that is tailored to your company's goals. Our mission is to be your direct contact on site and to offer you services related to training and customer support. We are happy to support you from Germany – from consulting to purchase and throughout the entire life cycle of your machine. With our German branch, we are always there when you need us to react quickly and efficiently. Here, we are your reliable partner for technologically high-quality solutions in sheet metal processing.

Year of construction: 2024, condition: new, Everything can be configured according to your requirements, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor for rear back gauge and linear ball screw system (X-R) CNC crowning European-style tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional equipment: Control unit - ModEva Premium, 69T and 66T CE manual F. AKAS II M FPSC-B-C + safety guards with switch CE F. AKAS-LC II AKAS-3 M motorized + FPSC (safety PLC) CE BLVT safety – only for tandem machines Z1, Z2 axes X1, X2 axes R1, R2 axes Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm – rear guard with light curtain AP3-AP4 bending aid Height-adjustable laser angle measuring system Quick clamping system Hydraulic and pneumatic tool clamping systems Upper and lower tools Bjdpfx Asfiryfjphjdf Lower tool positioning system Parking area Central lubrication system Oil cooler Additional back gauge finger and additional adjustable support arms Special packaging for overseas transport

Condition: new, Everything is configurable on request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Rear back gauge with motor, linear guide, and ball screw Bdjdpfofiqa Rjx Aphef Back gauge finger with height adjustment (R-axis, manual) CE upper tooling system Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, complying with globally applicable standards Electrical equipment, complying with globally applicable standards Optional accessories: D-BEND software for 3D bending simulation and alignment R-axis CNC (X = 650mm), X, R (double guide, aluminum) Upper tooling, CE Lower tooling, CE Lower tooling, DURMA Quick tooling clamping system CNC-controlled crowning, with motor Rear back gauge (1000 mm) – rear protection with light curtain Oil cooler Additional back gauge finger and additional sliding front support system for sheet metal Special sea-worthy packaging 8-meter press brake, 800 tons. With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to gain an overview of our machines on-site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct point of contact on-site and to provide you with services relating to training and customer support. We are happy to support you from Germany – from consultation to purchase and throughout the entire life cycle of your machine. With our German branch, we are always available locally to react quickly and efficiently when you need us. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,580 kg, input voltage: 400 V, total length: 1,180 mm, total width: 1,600 mm, total height: 2,310 mm, 40T OPEN BACK ECCENTRIC PRESS Professional eccentric press with a rigid and durable construction designed for punching, stamping, bending and forming metal components. The open back frame design provides convenient access to the working area and excellent operating ergonomics. The machine is equipped with a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems ensuring reliable and safe operation. Main machine features: • Open back frame design • Rigid and durable machine construction • Fixed working table • Horizontally mounted crankshaft • Transversely mounted crankshaft • Dry pneumatic friction clutch • Adjustable slide stroke • Lifting balance device • Safety valves • Manual control • High production efficiency Bjdpeytdl Aofx Aphedf TECHNICAL SPECIFICATIONS: • Press force: 40 t • Stroke under nominal load: 6 mm • Slide stroke: 120 mm • Number of strokes: 55 strokes/min • Max. die height: 220 mm • Die height adjustment: 80 mm • Throat depth: 260 mm • Working table width: 480 mm • Working table length: 710 mm • Working table thickness: 80 mm • Table hole diameter: Ø180 mm • Bed opening dimensions: Ø200 × 150 × 300 mm • Slide bottom surface width: 270 mm • Slide bottom surface length: 320 mm • Max. body inclination angle: 25° • Distance between columns: 300 mm • Punch hole diameter: Ø50 mm • Punch hole depth: 70 mm • Motor power: 4 kW • Overall dimensions: 1600 × 1180 × 2310 mm • Weight: 3580 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Additional Information If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 950 mm, total width: 1,460 mm, total height: 2,380 mm, 25T OPEN BACK ECCENTRIC PRESS Professional eccentric press with a rigid and durable construction designed for punching, stamping, bending and forming metal components. The open back frame design provides convenient access to the working area and excellent operator ergonomics. The machine is equipped with a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems ensuring reliable and safe operation. Main machine features: • Open back frame design • Rigid and durable machine construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Press force: 25 t • Stroke under nominal load: 3 mm • Slide stroke: 10–110 mm • Number of strokes: 80–120 strokes/min • Max. die set height: 250 mm • Die height adjustment: 50 mm • Throat depth: 210 mm • Distance between frame columns: 450 mm • Working table width: 700 mm • Working table length: 400 mm • Working table thickness: 80 mm • Outer table hole diameter: Ø170 mm • Table hole depth: 20 mm • Inner table hole diameter: Ø150 mm • Slide bottom surface width: 360 mm • Slide bottom surface length: 300 mm • Punch hole diameter: Ø40 mm • Punch hole depth: 60 mm • Motor power: 3 kW • Overall dimensions: 1460 × 950 × 2380 mm • Weight: 3100 kg Bodpfx Aoytcvgjphodf Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Delivery Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. Additional Information If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, 16T OPEN BACK ECCENTRIC PRESS Professional 16-ton eccentric press designed for punching, stamping, bending and forming metal components. The open back frame construction provides easy access to the working area and comfortable machine operation. The rigid and durable construction ensures stable operation even during intensive industrial use. The machine is equipped with a dry pneumatic friction clutch and modern safety systems. Main machine features: • Open back frame design • Rigid and durable construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves Bdedsyrr E Ispfx Aphef • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Pressing force: 16 t • Stroke under load: 2 mm • Slide stroke: 0–70 mm • Number of strokes: 125 strokes/min • Maximum die height: 170 mm • Distance from slide block to frame: 170 mm • Working table dimensions: 320 × 480 mm • Table hole diameter: Ø100 mm • Opening dimensions: 160 × 240 × Ø210 mm • Slide dimensions: 180 × 200 mm • Shank hole size: Ø40 × 60 mm • Distance between columns: 220 mm • Table thickness: 60 mm • Maximum tilt angle: 25° • Motor power: 1.5 kW • Machine dimensions: 1150 × 900 × 1910 mm • Weight: 1400 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Delivery to customer possible • Shipping cost calculated individually • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Additional delivery information: • Delivery can be arranged throughout Europe • Shipping cost calculated individually depending on customer location • Fast order processing • Personal collection possible • Machine professionally secured for transport

Condition: used, functionality: fully functional, ERFURT PRESS 250t Bjdpev Hqacsfx Aphodf

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function Bjdpfx Apsyz Dtdshedf - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: repair required (used), Nice wheel loader – starts, drives, and brakes well. Year of manufacture: 2004. Hours unknown. Extra function. Lighting does not work. Comes with Dutch registration. Needs some work. Quick coupler does not release properly, it's stuck (jamming?). Bodpfxoywfp Es Aphsdf

Condition: new, Year of construction: 2025, total height: 3,700 mm, ram adjustment: 150 mm, installation height: 650 mm, table height: 854 mm, total width: 2,479 mm, total length: 4,186 mm, table length: 2,000 mm, table width: 1,200 mm, conveyor belt width: 350 mm, pressing force: 250 t, stroke length: 250 mm, distance between side stands: 920 mm, distance between stands: 2,040 mm, overall weight: 31,000 kg, control voltage: 24 V, Standardized 250-ton automatic punching press with fixed stroke at an attractive price. Cost-optimized basic configuration without enclosures or safety gates for use in a soundproof booth. Optional accessories such as safety gates/enclosures, press force measurement, tool change/clamping system, etc. are available. For technical specifications and available accessories, see PDF documents. Bdodpfx Aswb Dh Iephsf Delivery time: 6 months

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Bdjdpfouk I Nxsx Aphof

Condition: excellent (used), Part suitable for: cars Technical condition: very good Optical condition: very good Bdsdpfx Aox N R R Eophef

Condition: excellent (used), Part suitable for: cars Technical condition: very good Bdsdpfxsx N R R Sj Aphof Optical condition: very good

Condition: excellent (used), Part suitable for: cars Technical condition: very good Bdsdpfx Apex N R N Ushof Optical condition: very good

Condition: excellent (used), Part suitable for: cars Bdsdpfxox N R Rfe Aphof Technical condition: very good Optical condition: very good

Condition: excellent (used), Part suitable for: cars Technical condition: very good Bodpfx Asx N R Rlophodf Optical condition: very good