Used Horizontal Lathes Weiler E35 1997 for sale (12,194)

Condition: new, Year of construction: 2025, - New machine - Precision lathe with automatic cycle control, for chuck and shaft machining. Brand: WEILER | Model: E 120 x 4500 | Year of manufacture: 2025 The precision giant. A powerful and energy-efficient production lathe with optimum accessibility. The machine for heavy workpieces. Maximum cost-effectiveness from turning to milling. Precise and universally applicable, it impresses with: - State-of-the-art control and drive technology - Extremely simple operation and programming - Highest accuracy - Longevity - User-friendly ergonomics TECHNICAL DATA / ACCESSORIES, EQUIPMENT: Control system: Weiler cycle control ONE 1 (Siemens) Working range: - Centre height: 600 mm - Swivel diameter over bed: 1.200 mm - Swivel diameter over cross slide: 830 mm - Centre distance: 4.500 mm Ncjdpjy Hfy Asfx Ac Tju Extensive, high-quality equipment. Sales within Germany include a 24-month warranty. No guarantee is given as to the completeness and accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on the equipment available on request.

Condition: good (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: CK01, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 43 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, total height: 1,700 mm, total length: 1,800 mm, total width: 1,350 mm, quill diameter: 50 mm, quill stroke: 110 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, WEILER E30x750 lathe (year of manufacture 2007) – ready for immediate use, well-maintained, fully functional (Graz) For sale is a WEILER E30x750 lathe from 2007 in very good, well-maintained, and fully functional condition. The machine has been used reliably and is ready for immediate operation. Inspection is possible by appointment in Graz – either on-site or via video call. Data: Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Condition: fully functional, ready for immediate use Location: Graz Machine operating hours: 26,492 h (The actual operating hours are significantly lower! Based on experience, it can be assumed that the spindle running time (actual turning) accounts for only about 30% to 50% of this (i.e. approximately 8,000 to 13,000 hours) Electrical connection: 400 V Inspection: on-site or via video call by arrangement Technical data: Center height: 165 mm Turning diameter over bed: 330 mm Turning diameter over cross slide: 160 mm Distance between centers: 750 mm Turning spindle Ncsdpfxjvphv Ts Ac Tou Spindle head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turning spindle: 180 Nm Main drive Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: infinitely variable Feed / Rapid traverse Feed drive: three-phase AC feed drives Feed range (infinitely variable): longitudinal: 0.001–50 mm/rev (Note: additionally stated 0–20 mm/rev) cross: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (Note: additionally stated 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 TPI Tailstock / Quill Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Accuracy Acceptance accuracy: DIN 8605 Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for more information and to arrange an inspection appointment. We will gladly send you further photos and videos of the machine in operation.

Condition: new, functionality: fully functional, Hand lever quick-change chuck Spindle speeds from 110 - 3600 rpm Multifix A head Ncsdjzc I A Repfx Ac Teu Collets

Condition: good (used), functionality: fully functional, 1 x Mechanic’s lathe Weiler RDU 260-80 Machine with complete accessory package, in good condition. Technical data: - Spindle bore: 38 mm - Spindle speeds: 125 - 2800 (left/right) - Center height: 130 mm - Distance between centers: 350 mm Equipment: - Crank cross slide with Multifix A quick-change system - Crank tailstock MK 2 - Hand lever cross slide - Hand lever tailstock with draw-in collets Nedpezczbyofx Ac Tocu - Parting tool slide - 6-position turret - Collet chuck with draw-in collets - Coolant system Accessories: 65 x draw-in collets 358 E C - 5 1 x draw-in collet in tailstock 366 E (MK 2) 1 x quick-change tool holder Multifix A with 1 cassette 1 x 3-jaw chuck Röhm 140 mm Further accessories, such as collets for the tailstock or tools for the tailstock/turret, are available at an extra cost. The machine can be inspected while powered.

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual Ncedpfx Aeywpcpsc Teu • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm Nedpfx Acsxq Hhyo Tjcu turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm Ncodpsufud Dofx Ac Teu total power requirement:2,2 kW weight of the machine ca.:650 kg dimensions of the machine ca.:1700x1000x1700 mm :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 :0,007 - 0,63 mm/U :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 :MK 3 3-jaw chuck:160 mm mm :Typ B

Condition: excellent (used), Weiler Commodor Turning length: 750 mm Turning diameter over bed: 380 mm Ncsdpozcn Sfefx Ac Tou Turning diameter over cross slide: 190 mm Spindle speed: 25 - 2000 rpm 18 speeds Spindle bore: Ø 56.0 mm Tailstock quill mount: MK 4 Quill travel: 150 mm Bed width: 310 mm Spindle mount: DIN 55027 / 6 Feeds - longitudinal: 0.022 - 0.8 mm/rev Feeds - facing: 0.011 - 0.4 mm/rev Threads: M 0.3 - 10.0 mm Machine weight approx.: 1600 kg Dimensions L x W: 2400 x 900 mm Accessories/Equipment: - Emergency stop - Multifix B including 4 tool holders - Electrically interlocked chuck guard - Lead screw and feed spindle cover - 3-jaw chuck Forkardt D200mm The machine is in very good condition and runs perfectly. The machine bed is in excellent condition! Backlash of facing slide spindle: 0.1 mm Backlash of top slide: 0.1 mm

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Ncodpfx Acjzcn Aks Tou

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V Njdpfxjzbc Dts Ac Tscu weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: ready for operation (used), turning length 450 mm turning diameter over bed 245 mm turning diameter over slide rest 135 mm spindle bore 23.0 mm tool adaptor DIN 55021-4 quill: 2 MK quill travel 80.0 mm turning speeds 60 - 3000 U/min bed width 155 mm total power requirement 1.2 / 1.5 kW voltage 380 V weight of the machine ca. 340 kg. range L-W-H 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned parts The Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces. The machine is built for extremely tight tolerances. The hardened and ground machine bed ensures maximum for maximum vibration damping and durability. Features: Ncsdpfezbc Daex Ac Tou - Robust lead/traction spindle lathe - 2-axis digital readout "D60-2V" - three-jaw chuck - Folding lathe chuck guard - chuck key - MULTIFIX steel holder with 3x inserts - Sliding tailstock - Control panel, front left - infinitely adjustable feeds for flat and top support - Pole-changing drive motor - machine base frame - Chip guard rear panel - Additional accessories such as collet holder Collets etc. - EMERGENCY OFF button at the front

Condition: good (used), functionality: fully functional, Internal article number: 26049 Lathe Weiler Commodor + 2-axis digital display Heidenhain + Multifix "B" base holder + Chuck guard Technical data: Max. turning diameter over bed: 380 mm Max. turning diameter over cross slide: 190 mm Max. turning length: approx. 1000 mm Bar capacity: approx. Ø 56 mm Spindle speed range: approx. 13 – 2000 rpm Spindle nose: A2-6 Drive power: approx. 4.0 kW Feeds & threads Automatic longitudinal and cross feeds Feed range: approx. 0.011 – 0.80 mm/rev Tailstock MK4 L × W × H: approx. 2500 × 1200 × 1800 mm Weight: approx. 1500 kg Nedpfx Acezb Nmuo Tecu The machine is fully functional and can be inspected under power by arrangement in our heated storage area of over 500 m².

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. 2022 (Repairs/renovations performed by WEILER service technicians): Nsdpfszcv Egox Ac Tjcu - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted - Spindle bearings and timing belt of the X-axis replaced - Bearing unit of the Z-axis replaced - Scraper replaced - Reference points adjusted - Test run performed

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Nsdpfsxp Ru Uex Ac Tecu

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Ncjdpfx Acsxp Rvle Tou

Condition: used, Collet set, rotary tool chuck collet holder for draw-in collets Collet chuck, collet holder, collet system Suitable for BOLEY - LEINEN - SCHAUBLIN - WEILER Draw-in collet type: 367E K28 DIN 6341 Collet diameter: 28 mm Collet length: approx. 105 mm Ncjdpfx Acszbhu Dj Tou Collet thread: TR 28 x 1.5 mm Collet taper: 40° - Draw tube with internal thread M 28 x 1.5 mm, handwheel for manual tightening of the collet - Length of draw tube to stop collar inside the handwheel: 457 mm - Outer diameter of draw tube: Ø 31 mm over a length of 390 mm, Ø 32.5 mm over a length of 67 mm - 31 draw-in collets: Ø 1 / 2 / 3 / 3.5 / 4 / 4.5 / 5 / 5.5 / 6 / 6.5 / 7 / 7.5 / 8 / 8.5 / 9.5 / 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 20.5 / 21 / 22 / 23 / 24 mm Total weight: approx. 10 kg Good condition

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, WE OFFER AN NICE CONDITION REALMECA RMH -HORIZONTAL 4 AXES MILLING Ncedpfxovnz Dhj Ac Tou CONTROLS: HEIDENHAN 530 MACHINE IS IN GOOD WORKING CONDITION

Condition: used, Year of construction: 2005, operating hours: 11,800 h, functionality: fully functional, spindle bore: 41 mm, turning length: 750 mm, turning diameter: 330 mm, turning diameter over bed slide: 435 mm, quill diameter: 50 mm, center height: 165 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 11,000 W, overall weight: 1,400 kg, Equipment: rotational speed infinitely variable, Description For sale is a cycle-controlled WEILER E30X750 CNC lathe with a Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2005 Control system: Siemens 810 D Condition: good, fully functional Location: near Munich Inspection: on-site or via video call by arrangement Pictures/Video: Further pictures and videos of the running machine will be provided upon request. Technical data: Working area: Center height: 165 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 160 mm Distance between centers: 750 mm Turret: Turret head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turret: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 min⁻¹ Number of speeds: continuously variable Feed / Rapid traverse Feed drive: Three-phase AC feed drives Feed range (continuously variable): longitudinal: 0.001–50 mm/rev (Note: additionally specified 0–20 mm/rev) transverse: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N transverse: 3,000 N Max. rapid traverse speed longitudinal/transverse: 8 / 4 m/min (Note: additionally specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 threads/inch Tailstock / Quill: Njdpfx Acozbybvo Tocu Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Interested? Contact us for further information and to arrange an inspection appointment. Provider MT EVO, Puch bei Salzburg

Condition: new, Year of construction: 2022, functionality: fully functional, turning length: 500 mm, turning diameter: 240 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 530 mm, Equipment: documentation/manual, Numerically controlled turning center Weiler DZ 45 CNC / ARY with Siemens Sinumerik control system 840D sl The CNC precision lathe from Weiler for the highly productive area in production, toolmaking, research institutes and much more, toolmaking, research institutes and much more. High-quality, energy-efficient, precise and very versatile. Turning diameter 240 mm Turning length approx. 500 mm Bar capacity 42 mm Main drive with 21.5 kW Powerful axis drives Suitable for chuck, bar and shaft machining Y-axis for machining complex workpieces Counter spindle Up to 16 driven tools Complete machining of workpieces in one clamping operation High rapid traverse speeds High accuracy due to direct path measuring system Wide range of applications Integrated safety function in all axes LED machine light This offer is subject to change and non-binding. Subject to alterations, errors and prior sale. Thank you for your information, payment has already been received. Nodpjum R Ebofx Ac Tscu

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Center distance: 2000 mm • Center height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed slide guide length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: • Gear stage 1: 1–625 rpm • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Tool holder system: Multifix size C or Parat size 3 • Availability: machine available soon • Overhaul: will be fully overhauled in 2026 • Hardening and grinding of all bed guides; grinding of tailstock guides • Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways) • Renewal of bed slide sliding lining • Renewal or relining of keyways and lower guides • Installation of a tool system on a console (Multifix C or Parat Gr.3) Ncodpfx Acsy H E Akj Tju • Overhaul of complete spindle housing assembly • Regrind main spindle (internal/external taper and face) • Renewal of main spindle bearings • Renewal of X-axis ball screw drive incl. bearings • Renewal of Z-axis ball screw drive incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of defective rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and testing of the central lubrication unit • Replacement of movable cables and coolant hoses in the work area/to the monitor • Replacement of the membrane keypad (monitor) • Renewal of the energy chains • Painting in standard colors (standard texture) • DGUV and high-voltage testing with test report • Data backup of machine parameters/software • Geometric acceptance testing according to DIN 8605 Additional equipment • Optional accessory: chip conveyor availableThe machine will be overhauled in July the pictures are only refreneces of how it would look like. Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), functionality: fully functional, Weiler Praktikant R 500 lathe In very good condition, turning test: 100mm, runout 0.005 parallel. Guideways and smooth running in all speeds are flawless. Turning diameter: 280 x 500 Spindle speeds: 42 - 2000 Nedpfx Acszbhnqj Tecu Spindle bore: 36 3-jaw chuck Röhm 160, live center, quick-change drill chuck, lighting, coolant system. Multifix A with 4 holders, additional accessories available upon request. Dimensions: L 1.42m, W 0.6m, H 1.24m, weight approx. 600 kg Can be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: excellent (used), Year of construction: 2002, Technical Data WEILER E90 x 6000 precision lathe with cycle automation. The machine is in very good condition, considering its age. Maintenance has been documented. The Brio milling attachment allows for milling operations such as hexagon milling and the milling of grooves. Year of manufacture: 2002 Control system: Siemens Work area: Swinging diameter over bed: 900 mm Swinging diameter over cross slide: 530 mm Bed width: 600 mm Turning length: 6000 mm Spindle and drive: Spindle bore: 128 mm Spindle diameter in the front bearing: 178 mm Speed range: 1 to 1120 min⁻¹ Main drive with 2-stage gearbox: 45 / 37 kW Tailstock: Quill diameter: 140 mm Quill stroke: 300 mm Internal taper: MK 6 Dimensions and weight Nedpfjzagkhjx Ac Tocu Machine weight: 13,000 kg Dimensions (L x W x H): 8400 x 2600 x 2150 mm Equipment and accessories: Indexing device for main spindle Milling attachment Brio BF90, mount: SK50, drive power: 11 kW Turret with quick-change tool holder Heidenhain linear scale in the X-axis Chip conveyor Many tools, including tool holders, supports, steady rests, 3 x 3-jaw chucks (900 mm, 600 mm, 300 mm), drills, and other accessories – see photos.

Condition: used, Year of construction: 1999, turning length: 1,000 mm, turning diameter: 500 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, capacity: 1000 x 570 mm spindle bore: 80 mm multi-tool turret Ncsdpey E Hvvofx Ac Tju Siemens control steady rest 3-jaw rotary chuck, 315 mm

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 1324, spindle bore: 42 mm, total length: 2,000 mm, total width: 1,000 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 22 rpm, overall weight: 1,500 kg, WEILER CONDOR B Lead and Feed Screw Lathe - Operating voltage: 380 V - Control voltage: 220 V - Connection: 3 kW - Rated current: 25 A - Frequency: 50 Hz - Centre distance: approx. 700 mm - Centre height over bed: 170 mm - Swing over bed: 340 mm - Centre height over cross slide: 100 mm - Swing over cross slide: 200 mm The machine is equipped with a tailstock, a Multifix tool holder, type B, as well as a 3-jaw chuck by RÖHM, diameter: 150 mm. Additionally, it features a digital readout by ELESTA, model: VISULESTA 4, including a matching workshop drawer cabinet with suitable accessories for the machine. Nsdpoyiztisfx Ac Tscu FCA D-73235 Weilheim Teck – loaded onto truck

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Ncjdpfx Acon Ard Ds Tsu