Used Horizontal Press for sale (18,283)

Condition: used, Year of construction: 1999, Amada Promecam HFB 2204 8-Axis Hydraulic Press Brake (1999), Capacity 2200kN, 4000mm Bed, Maximum Stroke 180mm, Stopping Time 80ms, Stopping Distance 9mm, Machine Weight 16000kg. S/No. HFBO 220 40 H990103 (1999). Country of Origin: France Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Please Note: This lot is located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Pedjzn Urzspfx Afljgp

Condition: new, Year of construction: 2026, functionality: fully functional, controller manufacturer: Cybelec, controller model: CybTouch 15, bending force (max.): 125 t, control type: CNC control, IT2 2026 Design CNC Controller CYBELEC CybTouch 15 Force 125 T Bending lenght 3000 mm Distance between columns 2600 mm Depth throat 320 mm Upper Ram stroke 150 mm Torsion Shaft with double Articulation Mechanical depth adjustment in each hydraulic Cylinder, Setting by brushless Servototor and transmission between left and right side Closing Ram speed 9 mm/s Upgoing Return-speed 40 mm/s Total Power requirement 10 kW Machine weight 6900 kg 3 +1 Axes (Y,X,R + compensation crowning) CNC controller CybTouch 15 with 15" Touchscreen with vivid colors and high contrast 200 Programs, 50 Dies, 24 Sequences per program, 10 Materials Automatic calculation of hydraulic cylinder's stopper position Easy single bends with the EasyBend page Correction menu Many languages available Upper Ram guidance by grey cast iron slydways Hydraulic equipment with counter balance compensation- pressure in lower chamber Centered lower die system 60 mm AMADA-tool Standard and 13 mm WILA Groove Upper Ram featured with 15 tool holders for punches with AMADA Standard dimensions and Fall down security Back gauge with linear guide and Ballscrews Back gauge travel 600 mm (Option 800 mm) 2 back gauge fingers on linear guides Automatic height adjustment (R axes) Automatic crowning table Safety Equipment : Foot switch with Emergency Stop Position Closing speed < 10 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit cat IV Standard configuration and equipment : Electric control cabinet on right side CNC control interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 150 mm 1 Line of 4 sides Dies, widths: 16 mm / 85°, 22 mm / 85°, 35 mm / 85°, 50 mm / 85° CE Certificate Operation manual in English, German or French language Pgodpfjxhc Spox Aflep Warranty 2 Years EXW Douarnenez/ FRANCE special price 55,120 € + VAT loaded on Truck Delivery and Services need to be quoted seperatly

Condition: refurbished (used), Year of construction: 1998, overall weight: 33,000 kg, working width: 4,300 mm, HACO hydraulic press brake, Pressmaster 43230 model 4.3 m x 230 tons Retrofit with new Easybend 2DT touch-screen CNC control Podpfx Aozqabaoflogp X-axis back gauge with ball screw Manual crowning table 2 adjustable front supports Machine designed for standard European tooling

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, working width: 2,500 mm, bending force (max.): 75 t, Refurbished machine Haco press brake, PPM type, 2.5m x 75T Psdpsxanm Ajfx Afljgp Control with + and - buttons Motorized back gauge, X-axis European standard type punches One-piece die

Condition: excellent (used), Year of construction: 2009, operating hours: 8,100 h, AMADA PROMECAM MODEL HFE 5020 50 TONS CAPACITY X 2000 year 2009 specification 7 AXIS CNC HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 50 TONS CONTROL OP 2000 CNC Podpfx Ajzn Afvsflsgp NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V090090 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2009 price POA specification

Year of construction: 1970, condition: ready for operation (used), machine/vehicle number: 55703, SANDT 410 Hydraulic Swing-Arm Cutting Press – 18 tonnes Price: €3,650 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands Very clean and robust German hydraulic swing-arm cutting press manufactured by J. Sandt AG, Pirmasens. Psdpfxozqhdie Afljgp Suitable for die-cutting materials such as leather, rubber, plastics, foam, felt, textiles, gasket material, cork and cardboard. Technical specifications * Manufacturer: J. Sandt AG * Model: 410 * Serial number: 55703 * Year of manufacture: unknown, presumably late 1960s * Cutting force: 18 tonnes * Working table: 900 × 450 mm * Swing-arm pressure plate: 550 × 350 mm * Measured clearance: approximately 110 mm * Mechanical height adjustment by handwheel * Electrical supply: 380 V, 3-phase, 50 Hz The machine is in clean, used condition and has been repainted. The lower cutting plate and the aluminium upper plate show signs of use. Machining and surface-grinding of both the lower and upper plates can be carried out upon request for an additional €250. The machine can be inspected and tested by appointment. Loading onto the buyer’s transport can be arranged. All information is provided to the best of our knowledge and is subject to verification.

Year of construction: 1996, condition: ready for operation (used), PRICE LOWERED for quick deal ! Pgodpfsxz Ncbox Aflop

Condition: good (used), Year of construction: 2001, functionality: fully functional, Please find below the details regarding the equipment available for sale: ARISA 400-ton Mechanical Press (S-2-400-160-FS) + DIMECO Feeder Line – Year 2001 Description: Complete ARISA 400-ton mechanical press for cutting/forming, with its automatic DIMECO feeder line (uncoiler/feeder). Technical Specifications: ARISA Press: - Brand / Model: ARISA S-2-400-160-FS (No. 400365947) - Year: 2001 | Standard: CE - Rated force: 4,000 kN (400 tons) - Stroke (Min / Max): 25 - 250 mm - Stroke rate: 25 to 100 strokes/min - Closed height: 485 mm | Slide adjustment: 200 mm - Power: 55 kW | Press weight: 65,000 kg (65 tons) ARISA Moving Table: - Model: Type 934.34 (No. 934345950) - Table dimensions (L x W): 1,700 × 1,300 mm - Max. tool load: 6,000 kg | Floor to table height: 1,025 mm DIMECO Uncoiling Line: - Includes: Single/double mandrel uncoiler + straightener/feeder + loop control - Max. coil capacity: 6,000 kg We remain at your disposal for any further information. BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS Pedpfx Aozpz U Ssflogp

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: High-performance mechanical stamping and forming press, ARISA brand, model S-2-400-240-FS, with a force of 400 tons (4,000 kN), year 1999. This high-precision industrial machine is ideal for stamping, cutting, and combined stamping/cutting operations for industrial series production (automotive, household appliances, precision sheet metal work). Here are the complete technical specifications: General Information: - Brand/Manufacturer: ARISA S.A. (Spain) - Model: S-2-400-240-FS (S Series) - Manufacturing No.: 400365704 - Certification: CE Type Examination No. 0070 090C 0088 09 95 (INRS) - Total weight: 66,000 kg (66 tons) Capacities & Performance: Pgsdpfx Ajzpz Dmjfljp - Rated force: 4,000 kN (400 tons) at 7 mm from the force point - Slide stroke: 25 - 250 mm - Closed height: 600 mm - Slide adjustment: 150 mm - Stroke rate: 25 - 100 strokes/min - Maximum flywheel speed: 500 rpm - Normal stop: Top Dead Center (TDC) - Time to reach safety distance: 0.126 s Dimensions & Tools: - Maximum dimensions of the upper tool (L x W): 2,300 × 960 mm - Maximum weight of the upper tool: 5,700 kg Power & Energy: - Installed power: 65 kW - Power supply: 380-500 V / 50 Hz (Three-phase, connection cable section 3.5 x 50 mm²) - Pneumatic pressure: 6 - 1 bar - Hydraulic pressure: 270 bar - Clutch-brake couplings: 30 cycles/min (Minimum-maximum pressure: 59 - 67 bar) Included Equipment: - Damping cushion / upper pneumatic cylinders - Front transparent protective screens and side safety grilles - Mobile control panel on wheels and emergency stop panels - Part/scrap discharge conveyor - High-rigidity column frame Do not hesitate to contact us for further information or to request a quote.

Condition: good (used), Year of construction: 2004, For sale CNC Horizontal Machining Center HELLER MCH 250 with Robot (YASKAWA GP50 Robot) – Siemens 840D Pgsdpfx Afjzpzyzslop 4-axis For sale, a high-productivity production cell / robotic island including a HELLER MCH 250 horizontal machining center with pallet changer, fully automated with a YASKAWA Motoman GP50 loading/handling robot and its secure loading cell. Complete set, ideal for high-volume production, intensive machining of automotive, aerospace, or precision mechanical parts with automated operation / without human presence. 1. Specifications of the HELLER MCH 250 Machining Center: Brand: HELLER (Gebr. Heller Maschinenfabrik GmbH) Model: MCH 250 Year of manufacture: 2004 Numerical Control (CNC): SIEMENS Sinumerik 840D Order / serial number: 32-46258 Power supply: 400 V / 50 Hz / 123 A Included equipment: 4 axes Automatic pallet changer Large capacity tool magazine (chain / upper matrix type) Chip conveyor with KNOLL high-pressure filtration / coolant unit 2. Specifications of the YASKAWA Loading Robot: Brand: YASKAWA Electric Corporation Robot Model: MOTOMAN-GP50 Type: YR-106VX50-A00 Year of manufacture: August 2018 Load capacity (Payload): 50 kg Robot weight: 570 kg Robot cell equipment: Specific gripper / clamp Gravity-fed / drawer part station / storage unit Complete protective enclosure with housing and CE safety grilles Machines disconnected and sold as is.

Condition: new, Year of construction: 2025, High performance CNC press brake PETERZEN model MORICO 70065 6 axis + 2 + 1 Rigid S355 steel frame Workbench structure and Ram manufactured from laminated S355 steel Symetric renforced Throats Heavy grey cast iron slydways with automatic lubrication system CNC Controller CYBELEC VisiPac 8 axis + 1 Bosch Rexroth servo valves Inovance servo drive systems DIEMA high resolution glass scales for high bending precision Bending force 700T Bending lenght 6500 mm Distance between columns 5100 mm Depth throat 420 mm Ram stroke 400 mm Closing Ram approach speed limited to 30 mm/s for human operation Closing Ram working speed 7 mm/s Return-speed 40 mm/s Main hydraulic motor 45 kW Machine weight 62,000 kg 8 Axes + 1 CNC controller Cybelec VisiPac Touchscreen monitor with vivid colors and high contrast 3D graphical profile drawing (Touch Profile) and precise 2D program creation The opening value can be setted individually in each sequence Machine can be inferfaced with different CAM software Easy single bends with the EasyBend page Correction menu Many languages available Centered lower die system 60 mm AMADA / WILA- tool or COLLY Standard Ram featured with intermittant tool holder for punches with AMADA or COLLY Standard dimensions and Fall down security All toolings adopt 42CrMo4 steel, induction hardened and cnc grinded 4 Axis Back gauge adopts linear guides and Ballscrews Back gauge travel X axis 1000 mm 2 automatic widened back gauge fingers on linear guide rails with helical rack and pinions (Axis Z1 and Z2) Automatic height adjustment (Axis R) 2 CNC Bending Followers 400 kg up to 60° angle Motorised displacement of bending followers and parking area on the right of the bending table Strong automatic mechanical crowning table. The compensation value is calculated and set by the CNC system. Safety Equipment : 3-position Foot switch with Emergency Stop Position Closing approaching speed limited to 30 mm/s for human operation Laser safety protection and permanent speed monitoring Closing bending (working) speed 7 mm/s Side covers with safety switch Rear-protection with sliding door and safety switch Low control Voltage (24V) Safety control unit category IV Standard configuration and equipment : Electric control cabinet on left side CNC user interface with Aluminium - arm 1 Line of punches (Upper tools) 85° R1, Height 200 mm 1 Line of centred lower Dies (to be defined) Place of manufacture : Douarnenez (Britanny) in Northwest FRANCE Customisation available Pgsdpfewd I Svox Aflep CE Certification in respect of CE2006/42 directive and EN12622+A1 European Standard Operation manual in English, German and French language Delivery and Services available worldwide Customized Quotation GROW YOUR BUSINESS WITH PETERZEN MACHINE TOOLS

Condition: used, Year of construction: 2005, functionality: fully functional, empty load weight: 1,300 kg, Horizontal drilling/pushing rig, complete with numerous extension rods. Bohrtec PZ 120/80. Year of manufacture: 2005. Weight: 1300 kg. Pushing force: 1200 kN. Pulling force: 800 kN. Length: 325 cm. Width: 60 cm. 46 x extension rod, 100 cm long, 22 cm diameter. 72 x extension rod, 100 cm long, 6 cm diameter. Crate with couplings and various accessories. See photos. Podpfxozp Sa Eo Aflegp Price net + 21% VAT or net for export. Calling or sending a WhatsApp message is the fastest way to contact us. We speak Dutch. We speak German. We speak English.

Condition: used, Year of construction: 2018, Avermann baling press, type AVOS 1810 BRK-90/100, year of manufacture 2018, cross-tying Technical data: Manufacturer: Avermann Type: AVOS 1810 BRK-90/100 Year of manufacture: 2018 Pressing force: 100 t Drive power: 2 x 45 kW Dimensions of the feed hopper: 1,800 x 1,000 mm Throughput capacity at 35 kg/m³: 15.0 t/h Throughput capacity at 60 kg/m³: 20.0 t/h Throughput capacity at 100 kg/m³: 29.0 t/h Bale dimensions: 1,100 x 750 mm (W x H), length variable Bale weight: up to 650 kg, depending on the material Podpfxjzqc Nge Afljgp Tying: 5-fold vertical, 3-fold horizontal, automatic Machine dimensions: approx. 11,200 x 2,400 x 3,900 mm (L x W x H) Machine weight: approx. 29,000 kg Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: like new (used), functionality: fully functional, * Mori Seiki NMV 5000 DCG. * Year: 2008. * Equipment value, including zero points, chucks, BT taper chucks, turning tool chucks, and pallets: 50,000–55,000 euros. * 5-axis continuous machining center. * High-precision Heidenhain linear guides. * Interface for connecting a pallet loader and robot. * Table with turning function. * Independent high-pressure cooling system at 40 bar. * Spindle oil cooling system. * BT 40 tool magazine. * Magazine capacity: 60 tools. * Maximum tool diameter: 125 mm. * Maximum tool length: 300 mm. * Maximum tool weight: 8 kg. * Travel on the X-axis: 730 mm. * Travel on the Y-axis: 510 mm. * Travel on the Z-axis: 510 mm. * Table with turning function. * Maximum workpiece diameter in turning mode: 450 mm. * Maximum turning diameter in turning mode: 700 mm. * Mori Seiki Mapps 4 conversational control. * Spindle speed: 20,000 rpm. * Spindle motor power: 18.5 / 15 kW. * Maximum cutting torque: 135 Nm. * C-axis table: 360,000 x 0.001 * B-axis rotation: +160 / -180 * Rapid traverse X/Y/Z: 50 / 50 / 50 m/min * Renishaw tool measurement system. * Renishaw workpiece measurement system. * Automatic zero-point adjustment. * Automatic cutting power control. * Program memory: 2 MB. * Dynamic zero-point correction (up to 8 points). * Pre-check of tool availability. * Custom macro (999 variables). * Rear chip conveyor. * Tool life management (128 x 2 groups). * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and instruction manual. * Weight: 13,500 kg. * Machine is currently in operation. * Available for inspection by an authorized Mori Seiki technician. * Immediate delivery, subject to immediate sale. Pgodpfozp Emfex Aflop

Condition: ready for operation (used), Year of construction: 1988, machine/vehicle number: 100.613, functionality: fully functional, Machine available for immediate delivery. Forklift available for loading. 2 cylinders per pressing unit. Cylinder stroke approximately 110 mm. Maximum pressing force approximately 1000 kp. Working width 250 - 2500 mm. Working height 250 - 1250 mm. Pgodpfxjy Tly As Aflep Working depth max. 600 mm. Electric height adjustment of the central vertical unit with scale. Manual adjustment of the central horizontal unit in 50 mm increments with pneumatic clamping. Separate control of the vertical and horizontal pressing units via hand control valve. Pressure force regulation 4 - 10 bar.

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 25 t, stroke length: 400 mm, reverse speed: 20 mm/s, table width: 1,000 mm, table length: 600 mm, table height: 1,000 mm, For sale is a hydraulic sub-platen press from the manufacturer DURENDUS with a maximum pressing force of 25 tons. The machine has a table size of 1,000 × 600 mm, a maximum installation height of 600 mm, and a stroke of 400 mm, making it suitable for assembly, straightening, pressing, and forming operations in industrial applications. ##### Technical data + information: Sub-platen press – 25 T – 1,000 × 600 mm ==== General information - Reference ID: DE-2026-HB-227-01 - Design: 4-column sub-platen press - Manufacturer: DURENDUS - Pressing force: 25 T (adjustable) - Table size: 1,000 × 600 mm - Maximum installation height: 600 mm - Working height: 1,000 mm - Overall height: approx. 1,850 mm - Overall width: approx. 1,750 mm - Overall depth: approx. 1,200 mm - Total weight: approx. 2,000 kg ==== Hydraulic cylinder - Stroke: 400 mm - Cylinder diameter: Ø 115 mm - Piston rod diameter: Ø 90 mm - Working pressure: 250 bar - Return speed: 20 mm/s - Idling speed: 10 mm/s ==== Hydraulics & drive - Hydraulic pump: 6 l/min - Motor power: 3 kW - Tank volume: 30 l - Pressure accuracy: ±5 bar - Hydraulic block and valves: DUPLOMATIC - Air and oil filter: FILTREC - Pressure gauge for pressure indication - Hydraulic unit: mounted at the bottom of the press - Hydraulic oil: HLP46 (not included) ==== Control - Operation: hand valve - Operating mode: manual - Pressure adjustment: rotary control - Stroke limitation: manual via sensor - Siemens components in the control cabinet ==== Safety - 4-column guidance with Ø 60 mm guides - Safety monitoring - CE-compliant design ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 4 kW - Total connection power: approx. 5 kW - Protection class of the control cabinet: IP54 ##### Application areas: pressing, forming, straightening, assembly work, jig and fixture construction, toolmaking, metalworking, mechanical engineering, maintenance, small series production (Sub-platen press, hydraulic sub-platen press, hydraulic press, 25 T press, 25 ton press, 4-column press, column press, assembly press, straightening press, pressing press, forming press, industrial press) Pedpfjzp Ex Uex Aflegp Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety directive NR 12, which is based on these. Our strength lies in the design and manufacture of special machines and the automation of presses. We distribute custom-made hydraulic presses at surprisingly affordable prices. Predominantly, components from leading European manufacturers are used for the hydraulics of the presses.

Condition: excellent (used), Year of construction: 1991, Distance between column:1870mm Pgjdpfx Aewyuqkjflop Hight under roof: 1400mm Table Length: 1600mm Length: 3400mm Width: 3400mm Height: 3500mm Weight: 19000kg

Condition: new, pressure 40.0 t stroke 285 mm flat steel 250 x 24 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 660 x 1250 mm Pgodpfx Afoxabhmsljp total power requirement 4.0 kW motor 400 Volt 50 Hz oil volume 40.0 l weight 800 kg range L-W-H 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 20.0 t stroke 185 mm flat steel 200 x 12 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 480 x 1060 mm total power requirement 2.2 kW motor 400 Volt 50 Hz Pgedpoxabtvefx Aflep oil volume 12.0 ltr. weight 530 kg range L-W-H 1150 x 480 x 1400 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual

Condition: new, pressure 80.0 t stroke 285 mm flat steel 300 x 25 mm working feed 10.0 mm/sec return speed 10.0 mm/min work height max. 930 mm table: 750 x 1425 mm total power requirement 10.0 kW motor 400 Volt 50 Hz oil volume 120 l weight 1700 kg range L-W-H 1500 x 750 x 1800 mm Features: Podpfexabhaox Aflegp - Electro-hydraulic horizontal bending machine - Large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * Programming of 1x bending end point & 1x return point possible - 1x tool set (1x bending punch / 1x 1V die) * Bending punch .. degree: 60° / bending radius: 5.0 mm * Die .. degree: 85° / V opening: 100.0 mm - Infinitely variable adjustment of bending speed & pressing force - 1x manual material stop - Freely movable double foot switch - Machine can be moved with a pallet truck/forklift - Operating instructions

Condition: used, Year of construction: 1995, functionality: fully functional, controller model: DNC 80, degree of automation: manual, Jonescheit Hytap 30 with DNC 80 – robust press brake featuring proven control system For sale is a Jonescheit Hytap 30 equipped with DNC 80 control. This is a robust and reliable press brake suitable for use in both workshop and production environments. The machine is designed for precise bending operations and stands out due to its solid construction and user-friendly operation via the DNC-80 control unit. It is an attractive solution for companies seeking a fully functional and immediately available press brake. Specifications: Manufacturer / Model: Jonescheit Hytap 30 Control: DNC 80 Year of manufacture: 1995 Type: manual Condition: used, fully functional Notes: The machine is sold without tooling. Inspection and test run on site are possible. Pgsdpfx Afsyxakyelop Condition: Used and ready for operation. Conclusion: A solid press brake for operators seeking a field-proven machine with DNC control. Ideal for on-site inspection and functional testing.

Condition: excellent (used), Year of construction: 2006, Rotogravure Printing Line with 3-Stage Rotary Die Cutter – 660 mm / 200 m/min High-capacity roll-fed rotogravure printing and converting line designed for large production runs of labels, cigarette cartons, pharmaceutical boxes and other folding-carton packaging. The machine combines printing, coating, drying, embossing, creasing, perforating, rotary die cutting, waste stripping and product delivery in one continuous production process. Main technical specifications Printing process: Rotogravure Number of printing units: 7 Pjdpfezpfpajx Aflogp Materials: Paper and cardboard Substrate weight: 60–300 gsm Maximum reel diameter: 1,800 mm Core diameter: 300 mm Maximum web width: 660 mm Maximum printing width: 640 mm Printing repeat range: 360–760 mm Maximum rotary die-cutting width: 660 mm Rotary die-cutting repeat: 535–800 mm Maximum production speed: Up to 200 m/min Print-to-print register accuracy: ±0.10 mm Print-to-cut register accuracy: ±0.15 mm Electrical supply: 400 V, 3-phase, 50 Hz Web direction: Right to left Unwinding and web control The line is equipped with a dual-reel automatic zero-speed splicing system. Printing and drying Seven rotogravure printing stations provide high-quality, repeatable color production. The printing units include adjustable doctor-blade systems, controlled impression pressure, ink circulation and viscosity-control equipment. Three supplementary ink trolleys are included. Space is available for the possible installation of an additional printing unit. The high-efficiency drying system provides: Electrical heating capacity: 50 kW Air volume: 7,000 m³/h Air velocity: 40 m/s Adjustable temperature and air recirculation Normal and UV varnish applications are possible, depending on the installed coating and curing configuration. Three-stage rotary finishing system This line is particularly suitable for manufacturers requiring large-volume, high-quality packaging production with printing and finishing completed in a single pass. rotogravure printing machine, gravure printing press, used rotogravure machine, 7 color rotogravure machine, 7 colour printing press, web-fed gravure press, roll-to-roll printing machine, packaging printing machine, packaging converting line, cigarette box printing machine, cigarette carton printing machine, tobacco packaging machine, cigarette packaging production line, folding carton printing machine, pharmaceutical carton printing machine, medicine box printing machine, paperboard printing machine, cardboard printing press, label printing machine, inline rotary die cutter, rotary die-cutting machine, rotary die cutter for paper, rotary die cutter for cardboard, embossing and creasing machine, carton die-cutting machine, inline finishing machine, roll-to-sheet machine, industrial sheeter, automatic reel splicer, non-stop reel splicer, register control printing press, The universal sheeting system provides a variable cutting length of 500–1,000 mm. Maximum production speed in sheeting configuration is approximately 140 m/min. The high-pile delivery can stack sheets directly onto pallets. Pallet changes and sample removal can be performed without stopping production. High-pile receptacle Voltage stabilizer The exact cylinder, cassette, tooling and spare-parts inventory should be confirmed during machine inspection.

Condition: excellent (used), Year of construction: 2014, Model Amada HFE MK2 80 x 2500 , 4 axis Press Brake Year 2014 Tonnage 80 tonnes Pgedpfx Aezmtqasflsp Max. Bend Length 2500 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power 9kw Weight 5600 Kg guarding Erwin Sick machine mounted light screen guards, side and rear interlocked fencing Dimensions Machine Length 3950 mm Machine Depth 2580 mm Machine Height 2540 mm Distance Between Side Frames 2125mm Beam width 60 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm

Condition: good (used), DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 X-axis travel: 650 mm Podpfx Aozqddxoflogp Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range - main spindle: 20 - 10,000 min/-1 Drive power - main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load, swivel range, rotary range: T-slots: 600 B: +/- 120 C: 360 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free neighboring slot: 160 mm Max. workpiece length: 315 mm Tool-to-tool change time: 1.6 sec Chip-to-chip change time: 8.0 sec Feeds: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed speed: 1 - 40,000 mm/min Total power requirement: 24 kVA Machine weight approx.: 11.5 t Space requirement approx.: 4.5 x 3.5 x 2.3 m Documentation Coolant system Electric handwheel Laser head: 100 Watts

Condition: good (used), Year of construction: 1997, functionality: unexamined, Equipment: CE marking, Used LIGMATECH carcass press - Model MPH 10 (GAZELLE) - immediately available Pgsdpfx Ajzp Sbisfljp - Year of manufacture 1997