Used Hubtex Four-Way Side Loader for sale (26,917)

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/bottom/universal two axes heads regulation spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder digital displays of working dimensions electric regulation of pressure rolls pneumatic pressure of feeding rolls Predpez Hcipsfx Amxsb grooved table

Condition: good (used), Year of construction: 2014, Baumann EFQ50LL/12/50, 5-ton side loader – used: Price at our location: only €14,950.00 (net)! Manufacturer: Baumann Type: EFQ50LL/12/50 Year of manufacture: 2014 Prjdszxcgzspfx Amxob Serial number: 8539-2014 Current operating hours: can be provided upon request. In 2020, when the customer purchased the machine, it had 9,400 hours; it has been used relatively little since then. Own weight: 9550 kg Load capacity: 5000 kg Drive: Electric Lifting height: 4960 mm Mast: Duplex Tires: 250-15 SE Overall height: 3345 mm Length: 4550 mm Width: 2200 mm Forks: 1180 x 150 x 60 mm Motor: Battery, 3 units, 80 volts, 1200 x 290 x 630 mm Cab: Full cabin Charger New battery in 2022 (€9,500.00), 80V 7HPZS 875Ah Condition: used Available: immediately Location: Hockenheim

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. M = Multidirectional steering Q = Cross-seat cabin 40 = 4,000kg 2125 = Series PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Prsdex Aqaqspfx Amxjb Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement Predpfxoibq Nie Amxjb electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: excellent (used), CATALOGUE NUMBER: 6950 TECHNICAL DATA - Max. width of workpiece: 220mm - Max. height of workpiece: 130mm - 4 spindles: 1) Horizontal lower spindle, 220mm, 5.5kW 2) Vertical right spindle, 130mm 3) Vertical left spindle, 130mm; (2 and 3 spindles) 5.5kW 4) Horizontal upper spindle, 220mm, 5.5kW - 4 spindles with electric up/down adjustment - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - 4 top feeding rollers, toothed, including 1 double roller - 1 top double roller for withdrawal, rubber - 1 bottom roller for withdrawal, rubber - Feed via cardan shafts - Smooth feed rate adjustment: 6-22 m/min - Feed motor: 2.2kW - Lifting motor: 0.55kW - Electric adjustment of planing thickness - Length of infeed table: 1970mm - Central lubrication - Diameter of dust extraction nozzle: 3x120mm, 140mm - Enclosed in a cabinet - Dimensions (L/W/H): 3350x1400x1400mm, weight: 1700kg - Made in Germany - Unpainted Prsdpfxezwwlie Amxjb - Used planer, very good condition Net price: 29900 PLN Net price: 6953 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Price may be subject to change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 1992, Used Machine Year of Manufacture: 1992 Features and Technical Specifications: - 4-sided planer with automatic positioning - 2 CNC axes - Max. planing width (finished dimension) 220 x 120 mm - Min. planing dimension 25 x 5 mm - Feed table length 2000 mm Prodpfx Amjzyy Ekoxob - Machine adjustment without opening the hood - Motors with direct start - Feed/thickness planer spindle with digital numerical control - Left planer spindle with digital numerical control - Feed speeds 6–12 m/min. - With pre-planing cutter - Planer spindle diameter: 40 mm - Speed: 6000 rpm - Motorized feed rollers (top and bottom; smooth or rubber-coated) for the outfeed - Feed motor: 0.6–0.9 kW - Planer motor: 4 kW - Right planer shaft: 4 kW - Left planer shaft: 4 kW - Thicknesser shaft: 5.5 kW

Condition: used, Year of construction: 2015, total width: 1,900 mm, total height: 1,800 mm, Colour: White Empty weight: 2.000 kg Dimensions (LxBxH): 490 x 190 x 180 cm - Year: 2015 - Documentation available: No - CE certificate present: No - Serial number: 1511030 - Number of spindles [pcs.]: 6 - └ Spindle 1: - - Spindle type: Horizontal spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 2: - - Spindle type: Vertical spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 3: - - Spindle type: Vertical spindle - - Motor power [kW]: 7.5 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 4: - - Spindle type: Horizontal spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 5: - - Spindle type: Horizontal spindle - - Motor power [kW]: 11 Pedpozwuhhjfx Amxorb - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - └ Spindle 6: - - Spindle type: Horizontal spindle - - Motor power [kW]: 11 - - Spindle diameter [mm]: 40 - - Cutterhead speed [rpm]: 6000 - Min. planing width [mm]: 44 - Max. planing width [mm]: 240 - Min. planing height [mm]: 18 - Max. planing height [mm]: 150 - Feed table length [mm]: 1150 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 8.7 - System/software: Schneider - Conveyor drive: Cardan drive - Lubrication system: Manual - Diameter extraction nozzle [mm]: 125 - Options: Powered rollers in table - Feed speed: Automatic - └ Min. feed speed [m/min]: 6 - └ Max. feed speed [m/min]: 24.1 - └ Feed speed control: Continuously adjustable - Voltage [V]: 415 - Current consumption [A]: 144.3 - Fuse [A]: 200 - Power [kW]: 60.0 - Transport dimensions: 4900mm x 1900mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOGUE NUMBER 7219 TECHNICAL DATA - max. width of workpiece: 200mm - max. height of workpiece: 150mm Number of spindles: 4 1) horizontal lower spindle: 200mm, 5.5kW 2) vertical right spindle: 150mm, 4kW 3) vertical left spindle: 150mm, 4kW 4) horizontal upper spindle: 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm Top: - 6 infeed rollers (toothed), including 2 double rollers - 1 outfeed roller (rubber, double) Pjdpfx Amezu R Rmsxjrb Bottom: - 1 infeed roller (toothed, drive, adjustable in the lower bed) - 3 side pressure rollers - 1 outfeed roller (metal, smooth) - all rollers pneumatically pressed - length of infeed bed: 2130mm - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - lifting motor: 1.1kW - stepless feed speed adjustment - feed motor: 3kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction port: 4x130mm - dimensions (L/W/H): 3650x1750x1800mm - weight: approx. 3000kg ADVANTAGES - with 4 heads - ideal for wet and dry wood - DTR documentation - used machine, very good condition Net price: 52900 PLN Net price: 12302 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (prices may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7220 Pjdpfoztzd Ujx Amxjrb TECHNICAL DATA - min – max width of workpiece: 20 – 230mm - min – max height of workpiece: 8 – 160mm 7 spindles: 1) horizontal, lower: 230mm, 5.5kW 2) vertical, right: 160mm, 5.5kW 3) vertical, left: 160mm, 5.5kW 4) vertical, right: 160mm, 5.5kW 5) vertical, left: 160mm, 5.5kW 6) horizontal, upper: 230mm, 7.5kW 7) horizontal, lower: 230mm, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter: 40mm - spindle speed: 6000 rpm From above: - 10 toothed, metal feed rollers, including 2 double rollers - 3 side pressure rollers From below: - side pressure roller at the infeed - toothed, feed roller, rotatable in the lower bed - 2 side pressure rollers - grooved bed - toothed, metal feed roller - smooth, metal feed roller - pneumatically adjustable rollers - length of infeed bed: 2410mm - central lubrication of the bed - electric adjustment of cutting depth - lifting motor: 1.1kW - stepless feed speed adjustment via inverter: 6-30 m/min - feed motor: 5.5kW - feed via Cardan shafts - enclosed in a cabinet - diameter of dust extraction port: 7x160mm - dimensions (L/W/H): 5100x2190x1800mm - weight: 5400kg ADVANTAGES – with 7 heads – ideal for both wet and dry wood – DTR documentation available – used planer, very good condition Net price: 138900 PLN Net price: 32300 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may be subject to change in case of significant exchange rate fluctuations)

Condition: reconditioned (used), Year of construction: 2014, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 600 Compact ----- The machine has been cleaned and fully inspected. Brief Summary: ----- - 5 Spindles - Powerful Motors - Left and top spindles controlled for width and height Detailed Description: ----- Technical Data: Working Width: 20-230 mm Working Height: 10-120 mm Number of Spindles: 5 Podpfxewzmu Rj Amxjrb 1st Spindle - Bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool Circle: 125-145 mm Tool Circle for Rebating Cutter: 130-160 mm Axially Travel: 5 mm Rebating Device MarathonCoatine for table insert in front of the 1st lower tool holder Electronic digital display for rotary adjustment 2nd Spindle - Right ----- Motor with brake: 11.0 kW Shared motor with left-hand tool holder Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind fence: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm 3rd Spindle - Left ----- Motor with brake: Shared motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm CNC-controlled radial spindle 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm CNC-controlled radial spindle Split pressure shoe in front of upper tool holder, adjustable to the tool swing diameter and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper spindle with electronic digital displays, integrated into the memory function or the PowerCom 5. Spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool travel: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Adjustment travel of the feed rollers relative to the left tool holder, axial 35 mm Machine electrical system ----- Operating voltage 400 V (voltage range 380–420 V), 50 Hz. All spindles IE2 design. Electrical design according to DIN VDE 0113, electrical equipment of industrial machines EN 60204, IEC 204-1. Other electrical regulations are not considered. Machine stand, tables, and ...

Condition: excellent (used), Catalog number 7294 TECHNICAL DATA - max. width of workpiece 230mm - min. width of workpiece 15mm - max. height of workpiece 160mm - min. height of workpiece 10mm 7 spindles: 1) horizontal lower 230mm 7.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) horizontal upper 230mm 7.5kW 6) horizontal upper 230mm 7.5kW 7) horizontal lower 230mm 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - motor 2 x 0.37kW - spindle diameter 40mm - all spindles equipped with a brake from above: - 8 feeding rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, pulling, rubber, double from below: - feeding roller, toothed, pulling, pivoting - 3 discharge rollers, pulling, metal, smooth - rollers are pneumatically pressed - length of the feeding table 2480mm - central lubrication of the table - electric adjustment of planing thickness - motor for lifting the housing 0.56kW - stepless feed speed adjustment on an inverter 6-24m/min - feed motor 3.7kW - feed on Cardan shafts - diameter of the dust extraction nozzle 7x125mm - dimensions L/W/H 5520x1930x1900mm - weight approximately 4000kg ADVANTAGES - for 7 heads - ideal for wet and dry wood - with ATS - original DTR + CE documentation - unpainted - used planer, in perfect condition Predpfszab Nfsx Amxob Original photos Net price: 156900 PLN Net price: 36500 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: used, functionality: fully functional, machine/vehicle number: JU3413, Year of construction: 2002, operating hours: 12,760 h, load capacity: 7,000 kg, lifting height: 3,920 mm, free lift: 365 mm, load center: 700 mm, fuel type: diesel, construction height: 2,830 mm, motor manufacturer: Perkins, DGUV certified until: 11/2026, fork carriage width: 260 mm, fork length: 1,380 mm, front tire size: SE300-15, rear tire size: SE300-15, empty load weight: 9,900 kg, total height: 2,830 mm, total length: 5,100 mm, total width: 2,350 mm, color: red, Equipment: CE marking, lighting, sideshift, Forklift Jumbo J/SH/14/50; No. JU3413, year of manufacture 2002; tires SE 3.00-15; platform width 1,400 mm; platform height 1,150 mm; overall height – structural height: 2,850 mm; width 2,350 mm, length 5,100 mm, mast height: 2,830 mm, lifting height 3,920 mm, free lift 365 mm, forks: 260 x 50 x 1400 mm; load capacity 7,000 kg / load center 700 mm, engine: Perkins diesel, approx. 12,760 operating hours – may change slightly as the vehicle is still in use; fork positioner, full cabin. Sale without guarantee and without warranty; Vehicle sale ex works – must be picked up by the buyer; Predpfxsz D Aace Amxob Inspection and test drive are possible by appointment.

Condition: used, Four-side planer Predpslc Id Iefx Amxob

Condition: ready for operation (used), Year of construction: 2011, A diesel side loader from the manufacturer Bulmor (formerly Jumbo) is available. Load capacity: 7000kg, load center: 700mm, lifting height: 4500mm, mast type: duplex, free lift: 1540mm, engine power: 74.5kW. Machine dimensions X/Y/Z: approx. 2250mm/5000mm/3000mm, weight: approx. 11000kg, operating hours: approx. 22300h. An on-site inspection is possible. Prjdpozcp Ubofx Amxsb

Condition: reconditioned (used), functionality: fully functional, Refurbished four-sided planer by SCM GROUP. The simple and robust design ensures long-term durability and high performance. The rigid steel machine base guarantees machining accuracy and quality. The machine is intended for larger operations specializing in the production of shaped and straight profiles. Features: - 5 working spindles: bottom, right, left, top, bottom - Automatic central lubrication of the working table - Material feed speed variator - Inspected machine with half-year warranty - Excellent technical condition - Equipped with tooling Technical data: - Working width (finished profile thickness) min/max: 25 / 230 mm - Working height (finished profile thickness) min/max: 6 / 120 mm - Table length: 2000 mm - 1st spindle (bottom): approx. 5 kW - Right and left spindle: approx. 7 kW - 4th spindle (top): approx. 7 kW - 5th spindle (bottom): approx. 5 kW Prsdpjvxtzaofx Amxjb - Tool speed: 6000 rpm - Stepless feed speed: 4 - 24 m/min - Feed motor: 4 kW - Weight: approx. 3000 kg

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Technical specifications: Length of jointer table: 2100 mm Diameter of tool spindle: 30 mm Diameter of planer heads: 100 mm Planer spindle speed: 6000 rpm Working width: 30 - 180 mm Working height: 6 - 120 mm With an optionally available smaller planer head for the left spindle plus narrower feed rollers, a minimum width of 15 mm can be achieved Motor power bottom, left, right: each 3.7 kW Motor power top (thickness spindle): 5.5 kW Feed speed: 6 and 12 m/min Electric height adjustment With 1/10 increment control Including step-controlled feed roller Podpfxexgkf Ue Amxerb Including planer heads Extraction ports: 160/120/120/140 mm Availability: short-term Storage location: Flörsheim

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,800 h, load capacity: 4,200 kg, lifting height: 6,500 mm, free lift: 2,000 mm, fuel type: gas, mast type: duplex, construction height: 3,200 mm, fork carriage width: 3,100 mm, fork length: 1,800 mm, empty load weight: 7,900 kg, drive type: Treibgas, construction width: 3,400 mm, Four-way side loader Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Rear tire type: Superelastic Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, reach trucks, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options are available from us at favorable terms. We would also be happy to buy your used vehicle outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed information about this C4800. P.S.: Our forklift workshop specializes in the repair, maintenance, overhaul, and special construction of forklifts from 8 tons upwards. We would also be happy to offer your vehicle for consignment sale. Fork positioner, Pedpfjz Ewfijx Amxerb Full cabin, full free lift

Condition: used, functionality: fully functional, machine/vehicle number: 0710, Year of construction: 2006, operating hours: 13,380 h, load capacity: 4,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, power: 36.77 kW (49.99 HP), fork length: 1,200 mm, tire condition: 80 %, overall weight: 6,100 kg, empty load weight: 6,100 kg, total height: 2,600 mm, color: green, Equipment: CE marking, cabin, lighting, retractable fork, sideshift, Well-maintained side loader in used condition. Predoz Dgwfepfx Amxsb

Condition: excellent (used), Year of construction: 2012, operating hours: 326 h, lifting height: 3,020 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, total height: 2,190 mm, color: other, GVW: 1.870 kg Lifting capacity: 2.000 kg 4-WAY DRIVING! ONLY 326 HOURS! NEW BATTERY CELLS 24V 3PzS 375Ah! 220V high-frequency charger, Fork length 1200 mm, Distance between forks 1310 mm, Total width 1810 mm, Power steering, FUNCTIONS LIKE NEW! Pedpfx Ajz E Nnvjmxjrb

Condition: excellent (used), Catalog number: 6338 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 160mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, lower: 230mm, 7.5kW 7) Universal: 360°, 230mm, 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - All spindles equipped with a brake - Spindle speed: 6000 rpm Top: - 6 toothed, metal feed rollers, including 2 double rollers - 4 rubber feed rollers, including 1 double roller Prodpfxeztzgps Amxjb - 3 pressure rollers at the outlet Bottom: - Side pressure roller at the inlet - Toothed, feed roller, swiveling in the lower bed - 3 smooth, metal feed rollers - Rollers adjustable pneumatically - Length of the feed table: 1190mm - Central lubrication of the table - Electric adjustment of the cutting depth - Body lifting motor: 0.56kW - Smooth adjustment of the feed speed on an inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Enclosed in a cabinet - Diameter of the dust extraction nozzle: 7x125mm - Dimensions (L/W/H): 5100x2070x1900mm - Weight: approx. 5000kg ADVANTAGES – 7 heads – Universal spindle – Ideal for wet and dry wood – Spindles equipped with brakes - DTR documentation – Used planer, very good condition Net price: 115900 PLN Net price: 26960 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalog number 6368 TECHNICAL DATA - max. width of workpiece 230mm - max. height of workpiece 130mm 7 spindles: 1) horizontal, lower 230mm, 5.5kW Psdpfxoztzgij Amxorb 2) vertical, right 130mm, 5.5kW 3) vertical, left 130mm, 5.5kW 4) horizontal, upper 230mm, 7.5kW 5) horizontal, upper 230mm, 11kW 6) horizontal, lower 230mm, 18.5kW 7) universal 230mm, adjustable at 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 adjustable electrically up/down - from above, 8 feed rollers, metal, twisting, including 2 double rollers - from above, 4 feed rollers, rubber - from above, 2 pressure rollers - from below, pawls - from below, on the side, 3 pressure rollers - from below, 2 metal rollers, smooth, feed rollers - from below, 2 double rollers, feed rollers, rubber - rollers pneumatically pressed - feed mechanism on cardan shafts - stepless feed speed adjustment 5-36m/min - feed motor 4kW - electric adjustment of planing thickness 0.75kW - length of infeed table 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction nozzle diameters 5x120mm, 2x150mm - dimensions (L/W/H) 5500x1840x1900mm - weight approximately 5000kg ADVANTAGES – Italian made – with 7 heads – for wet and dry wood – last spindle is universal – unpainted – used planer, very good condition Net price: 116900 PLN Net price: 27190 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1992, Weinig Hydromat 22 BL planer with destacker Year: 1992 Feed: 60 m/min Heads: 1. lower – 11 kW 2. right side – 7.5 kW 3. left side – 7.5 kW 4. upper – 11 kW Predpfxsyymqvs Amxob 5. lower – 7.5 kW 6. upper – 7.5 kW 6 feed rollers in the table Feed motor – 15 kW Planing width – 170 mm Planing height – 120 mm Machine mounted on an elevated platform.

Condition: excellent (used), CATALOGUE NUMBER: 6575 TECHNICAL DATA - max. width of workpiece: 230mm Psdjztzflopfx Amxjrb - max. height of workpiece: 170mm - 7 spindles: 1) horizontal lower 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindles), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal lower 230mm, 7.5kW 7) universal 230mm, adjustable by 360°, 7.5kW - all spindles adjustable up/down, right/left - spindles 3 and 5 are electrically adjustable - ATS (Automatic Thickness Setting) - spindle diameter: 40mm - electric brakes - top: 4 feed rollers, toothed, including 1 double roller - top: rubber double feed roller - top: feed roller, rubber, double - bottom: 2 metal feed rollers, smooth - bottom: feed roller, rubber, double - feed on cardan shafts - rollers are pneumatically pressed - stepless feed speed adjustment: 6-24m/min - feed motor: 5.5kW - electric adjustment of cutting depth - body lifting motor: 0.55kW - central lubrication of the table - diameter of extraction nozzles: 7x140mm - dimensions (L/W/H): 5800x2050x1850mm - weight approximately: 4500kg ADVANTAGES - German production, WEINIG brand - with 7 heads - universal spindle - with ATS - for wet and dry wood - used planer, very good condition Net price: 126900 PLN Net price: 29520 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7186 TECHNICAL DATA - max. planing width 510mm - max. planing height, two-sided 170mm - max. planing height, four-sided 100mm *from above: - toothed infeed roller - pawls - toothed feed roller - pressure roller - planing roller 510mm, 4-knife (2 knives installed) 4kW - smooth feed roller, outfeed *from below: - guide strip - slip roller – adjustable table with roller, up/down - planing roller 510mm, 2-knife 4kW - 2 smooth, slip rollers, adjustable *from the rear: - 2 side spindles + pressure roller - 1) vertical right spindle 100mm 2.35kW Pedpfxeztalqo Amxjrb - 2) vertical left spindle 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual planing thickness adjustment - 4 feed speed settings - feed motor 1.5kW - dimensions L/W/H 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 32900 PLN Net price: 7651 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), WEINIG PROFIMAT 22N four-side planer - DTR - German production - adjustable spindles Pedpfxsh Akbao Amxerb TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) 4 kW lower head 2) right head 3) 5.5 kW left head 4) 4 kW upper head 5) universal head 360 ° 4 kW 2.2 kW feed motor feed speed 5 - 20 m / min four upper drawing steel rollers two upper pulling rubber rollers one pull roller in the table top feed on cardan shafts electric height adjustment pre-table length 1970 mm central lubrication pneumatic clamps dimensions of the machine (length / width / height) 380/200/170 cm weight ~ 2000 kg