Used Ice Cube Factory From Wembley Stadium for sale (29,363)

Condition: used, length 1200 mm width 710 mm height 1000 mm Iedpey Tbvtofx Anwoic weight of the machine ca. 1,4 t Edge distance: 120/100 mm Groove size: 34mm Thickness: 80mm Number of grooves: 4x4

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round Isdpeivdv Dsfx Anwoic + rapid swelling during mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multi-tube stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra charge: - 3-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 70 liters - Continuous output*: 230 liters / hour - Peak cooling capacity*: 500 liters / hour - Ice bank: 60 kg - Cooling capacity (CECOMAF): 3.978 kW - Connection values: 400 V - 50 Hz - 1 phase - Power consumption: 2.84 kW - Water connection: 1/2 inch - Water flow at 2 bar: 25 liters / min - Dimensions: 1170 x 630 x 770 mm (L x W x H) - Net weight: 145 kg - Energy consumption per 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid hydration when mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + accurate dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-maintain surface structure + low energy consumption SPECIAL accessories, available as an option at an extra charge: - Wall bracket made of stainless steel (for models L130 + L170): + €499.00 net - Machine table (for models L130 + L170): + €589.00 net - 3-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 50 liters - Continuous output*: 115 liters/hour - Peak cooling capacity*: 330 liters/hour - Ice bank: 40 kg Iodpoivdvvsfx Anweic - Cooling capacity (CECOMAF): 1.86 kW - Refrigerant: R290 (new 2021 standard!) - Connection values: 230 V - 50 Hz - Power consumption: 1.45 kW - Water connection: 1/2 inch - Water flow rate at 2 bar: 20 liters/min - Dimensions: 560 x 590 x 900 mm (LxWxH) - Net weight: 80 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with 12 months warranty. Iisdpfx Anoivdu Uewec Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid hydration when mixing without ice + fluffier doughs thanks to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts made of stainless steel, requiring no cleaning + hygienically impeccable, clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel cooling evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for models L60 + L100): + €319.00 net - Machine table (for model L60): + €399.00 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 15 liters - Continuous output*: 50 liters / hour - Peak cooling capacity*: 90 liters / hour - Ice bank: 10 kg - Cooling capacity (CECOMAF): 1.013 kW - Connection values: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow rate at 2 bar: 8 liters / min - Dimensions: 650 x 400 x 560 mm (L x W x H) - Net weight: 50 kg - Energy consumption per 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with 12 months warranty Advantages of chilled ice water: + consistently low water temperatures + precise dough temperature control year-round + rapid swelling during mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + precise metering possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve Iedpfx Anoivdvkjwoic + electronic ice bank controllers + stainless steel refrigeration evaporators + multiple stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an extra charge: - Wall bracket made of stainless steel (for model L130 + L170): + €499.00 net - Machine table (for model L130 + L170): + €589.00 net - 3-way changeover valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 40 liters - Continuous output*: 70 liters / hour - Peak cooling capacity*: 230 liters / hour - Ice bank: 30 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50Hz - Power consumption: 670 W - Water connection: 1/2 inch - Water flow rate at 2 bar: 15 liters / min - Dimensions: 560 x 590 x 900 mm (L x W x H) - Net weight: 60 kg - Energy consumption for 100 liters: 1.5 - 2.5 kWh * at +17.5°C inlet and +2.5°C outlet

Year of construction: 2026, condition: new, functionality: fully functional, New unit with a 12-month warranty. Advantages of using chilled ice water: + consistently low water temperatures + precise dough temperature control throughout the year + rapid hydration during mixing without ice + fluffier doughs due to freshly chilled, liquid ice water + precise dosing possible via water mixing and dosing unit + water-carrying parts are made of stainless steel and require no cleaning + hygienically impeccable clean drinking water Langheinz ice water systems are characterized by: + consistently low water temperatures + high-performance refrigeration units + refrigeration systems with expansion valve + electronic ice bank controllers + stainless steel refrigeration evaporators + multi-stage stainless steel water heat exchangers + insulated stainless steel ice water tank + drain valve in the ice water tank + high flow rate + compact dimensions + easy-to-clean surface structure + low energy consumption SPECIAL accessories, optionally available at an additional cost: Iiodpfx Anjivdvcswsc - Wall bracket made of stainless steel (for models L60 + L100): + €319.00 net - Machine table (for model L100): + €389.00 net - 3-way switching valves --- for water mixing and dosing units with only 2 inlets (cold / warm) + €349.00 net Technical data: - Batch size (recommended): up to 30 liters - Continuous output*: 60 liters / hour - Peak cooling capacity*: 180 liters / hour - Ice bank: 20 kg - Cooling capacity (CECOMAF): 1,189 kW - Connection values: 230 V - 50 Hz - Power consumption: 575 W - Water connection: 1/2 inch - Water flow rate at 2 bar: 8 liters / min - Dimensions: 950 x 530 x 560 mm (L x W x H) - Net weight: 60 kg - Energy consumption per 100 liters: 1 - 2 kWh * at +17.5°C inlet and +2.5°C outlet

Condition: good (used), For sale: Baking trays with gutters brand: SASA number of pieces in total: 550 baking trays total price: €25,000 dimensions: Length: 200 cm width: 80 cm height: 5 cm gutter width: 9.5 cm number of gutters per plate: 21 gutters The baking trays come from a current Mecatherm Line See also the photos All as good as new and still provided with a Teflon layer and all the plate are stainless steel. Viewing is possible on location If you have any questions, we'd love to hear from you! Kind regards, Leo Holland for sale: baking trays with gutters brand: SASA total number of pieces: 550 baking trays total price: 25,000,- dimensions: Length: 200 cm width: 80 cm Iedpfert Uw Rsx Anwsic height: 5 cm width gutter: 9.5 cm number of gutters per plate: 21 gutters See also the photos All as good as new and still provided with Teflon layer and all plates are made of stainless steel The baking trays come from a current Mecatherm Line Viewing is possible on location If you have any questions, we would like to hear from you! kind regards, Leo Holland

Condition: used, functionality: fully functional, Clamping fixture for SK 40 tools The metal plate reads: Lorenz Ettlingen 7-191-020-0001 For securely clamping tool holders with SK40 during tool changes – tool clamping. For example, as an accessory for the Lorenz gear hobbing machine – impact machine. Clamping vise / clamping table / clamping cube. Clamping device for secure fixing and clamping. Clamping tower – tool changing device. Suitable for the 4 pcs. SK 40 tool holders. Weight: 75 kg Dimensions: 80 x 60 x 60 Price / details upon request. All technical specifications are subject to typographical errors and omissions. Ijdpfoyuwzmjx Anwjic We only sell to countries within the European Community.

Condition: used, Liquidation of a car paint shop with various painting and workshop accessories, all in working condition: 1. 4x (3+1 types) mobile sanding stations 2. 1x mobile sanding station 3. Approx. 10 stands 4. Approx. 10 X-stands 5. 3 hydraulic lifting platforms (compressed air) a. 1x 3.2t b. 2x 2.8t (1x converted into a motorcycle lift) 6. LOCKERS incl. keys a. 2x 90W x D40 x H190 b. 2x 80W + D40 + H190 7. CAR SPRAY FOIL SET (located in one of the lockers above) 8. 2 lockers incl. keys 180x60x60 9. IR heaters 10. Rolling scaffold H250 x D150 x L300 11. 2 x unwinding stands 12. 2 x scaffolds H250 x D80 x L2x300 13. Mini fan (jack) 14. STAND L100 x D35 x H35 15. STAND L130 x D30 x H50 16. STAND L190 x D50 x H75 17. Work platform with compressed air L200 x D70 x working height 100-120 18. Work platform L200 x D90 x H220 19. 13 spray guns + accessories 20. PAINTING STATION a. BYK paint measuring device "Automatchic Vision" 7060 (345 000 010) b. Scale c. Mixing station with scale and printer d. SHELF for paint manufacturer incl. remaining paints/coatings as shown in the photo 21. 2 x oxygen masks 3M Jupiter with adapter 22. Dent repair tool 23. Extraction system L190 x D70 x H110 The painting booth / painting system is not included in the offer, but can also be purchased. Iedpfsy Tyykjx Anwoic Condition: Used, functional Offers are welcome for the entire package or individual items. Further equipment can be viewed/taken on site. Also available in combination with the painting booth. Location: Ravensburg

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Ijdpfoxw Rcusx Anweic Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, LINDE Electric Forklift Type E25L-01 Serial No. H2X387D01930 Year of Manufacture 2013 Load Capacity 2500 kg Lift Height 4700 mm Fork Length 1600 mm Ijdpod Rmx Nsfx Anweic Fork Carriage Width 1150 mm Overall Height 2200 mm Operating Voltage 80 Volts - Triplex clear-view mast with 1500 mm free lift - 2x auxiliary hydraulics on the fork carriage for attachments - HOPPECKE Type 5HPZS 575 battery pack, 80 Volt 575 AH with EUW (new battery from 2019) - INDATRON Type D automatic charger, 80 Volt / 80 Ampere with EUW - 4-wheel super-elastic, solid rubber tires, front 225/75-10, rear 200/50-10 - Driver's cabin with Heating - Hydraulic auxiliary steering - 2 LED work lights at the front - 1 LED work light at the rear - 1 LED BlueSpott at the rear - 15,995 operating hours according to the hour meter - New TÜV and UVV inspection Length without forks: 2,500 mm Overall width: 1,150 mm Weight: approx. 4,700 kg Good condition

Condition: used, NAKAMURA-TOME NTRX 300 is a machining and turning center from bar, engineered for precision, high accuracy and reliable production. Main capacities: 6 axes (5 simultaneous), Z travel 1125 mm, X 700 mm, Y ±125 mm, B tilt 225°, C 360° resolution 0.001; workpieces up to 1100 mm length and Ø 640 mm; tool magazine 40 stations, tool Ø max 90 mm, tool length 300 mm. Technical specs: spindle nose Capto C6, main spindle up to 4500 rpm, milling spindle up to 8000 rpm, spindle motor 15/11 kW, rapid traverse 36 m/min, air 5–7 bar, 3x400 V 50 Hz, total power 65.1 kVA, weight ~18000 kg, footprint 4530×2670×2615 mm. Accessories: coolant system, paper filtration, toolholder set, milling cutters, drills, lamp, oil‑mist extractor, bar loader. Achieves tight tolerances; suited for automotive, aerospace, medical, watchmaking and machine‑tool sectors. Isdpey S A Rpjfx Anwsic

Condition: used, height 1000 mm width 750 mm depth 500 mm T-slot - width 22/40 mm T-slot - distance 170 mm Iiodpfx Asy Swhcsnwsc number of T-slots 5 There are 2 brackets. The dimensions refer to 1 angle. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Ice water facility L 100 model Iodofmcikjpfx Anwjic Recommended batch size up to: 30 liters Continuous output * (cooling output): 60 liters Peak cooling performance * with ice bank: 180 liters / h Ice bank: 20kg Cooling capacity (CECOMAF) t = -5 ° C: 1189 W Voltage: 230V; 50Hz Power consumption: 575W Water connection: 1/2 " Water flow at 2 bar: 8 liters / min Device dimensions L x W x H mm: 950 x 530 x 560 Weight empty / operation approx .: 60kg / 130kg Energy consumption at 100 liters: 1-2 KWh NEW device with warranty * with + 17.5 ° C inlet and + 2.5 ° C outlet. Technical changes reserved. Option: Underframe Visit us at the Milbrandt outlet shop

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 230 V, DGUV certified until: 06/2027, total width: 485 mm, total length: 586 mm, total height: 720 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 10 A, power: 1 kW (1.36 HP), NEW ++ NEW Flake Ice Maker KF 75 L NEW ++ NEW TOP Ice Machine - Stainless steel construction - Daily output up to 80 kg/24h - Air-cooled - Refrigerant R 404 A Iisdpfouiruzsx Anwjc Only with us: DGUV V3 tested Connection 230V/520Watt Dimensions: 485 x 586 x 720 mm (W x D x H) Brand new machine, SAB certified with warranty + service Options: Delivery service Water filter Maintenance contract Service package Leasing & rental service We have a large selection of bakery machines in stock!

Condition: good (used), Year of construction: 1993, total length: 1,400 mm, total width: 795 mm, total height: 920 mm, Manufacturer: ASQUITH Type: TB-1400 Year of manufacture: 1993 3 matching pieces Weight 2300 kg each Taper fabricated construction Ijdpfx Aewpvd Renwsic Specifications Metric US Standard Number of T slots 5 Up and 5 Down Pitch from T to T 260 mm T-slot dimension 28 mm Number of T-slotted sides 2 Dimensions (Estimate) Length 1400 mm Width 795 mm Height 920 mm Weight 2300 kg Please note: The information on this page was obtained by us to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but the accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend you check all important details.

Condition: good (used), overall weight: 2,800 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 900 mm, Manufacturer: CORREA Type: Box Table Year of manufacture: 2006 Specifications Iiodpfx Answp Dn Dewoc Metric US Standard Number of T slots: 8 Pitch from T to T: 150 mm T dimension: 22 mm Number of T-slotted sides: 2 Dimensions (approx. estimate) Length: 1500 mm Width: 1000 mm Height: 900 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you verify all important details.

Condition: good (used), Year of construction: 2005, EMCOMILL FB 6 (with digital scales X, Y, Z) Tool milling machine with 18 spindle speeds from 63-3150 rpm, 18 feeds in the X, Y, Z axes, toolmaker accuracy according to DIN 8615, slide travels X/Y/Z 700/500/500 mm, power 5.5 kW (100% duty cycle), hydraulic tool clamping, Ijdpfjy Tkghjx Anweic tool holder DIN 69871 SK 40, electrical connection 400/50/3, incl. Heidenhain scales in X/Y/Z, machine complies with CE, without counter support, with work area protection Manufactured according to ISO 9001: 1994 Year of manufacture 2005 F4UT3901

Condition: excellent (used), Year of construction: 2021, EMCOMAT 14 D Metric center lathe, including: Digital display and constant cutting speed, center distance 650 mm, center height 140 mm, spindle bore DIN 55029 - Size 4, spindle bore Dm. 40 mm, electrical equipment 400V/50Hz/~3/PE, drive power 5.4 kW, Continuously variable spindle speeds 60-4000 rpm, including chuck guard and spindle cover, machine stand, splash guard, standard accessories, operating manual and spare parts list, Electrical documentation. Digital display EMCO ACC. Machine complies with European safety standards (CE) Year of manufacture: 2021 C7D215001 includes: Röhm 3-jaw chuck ZS dmr. 140 mm Set of 3 toothed soft jaws External jaws, hardened, for Röhm chuck Dm. 140 Internal jaws, hardened, for Röhm chuck Dm. 140 FOLLOWING CENTER MK2 Quick-change drill chuck type 136 S, 1-13 Arbor MK2 / B12 Iiodjy Tichepfx Anwec MACHINE LIGHT LOADING DEVICE LONGITUDINAL TURNING STOP Leveling element Quick-change tool holder set A Operating manual EM14

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Equipment: freezer, lighting, ISA PROFESSIONAL ice cream display case ice counter ice cream parlor ice cream refrigerated display case 24 types of ice. Different advertising in front - the model remains the same. Ice cream display case with air-cooled indoor unit for the presentation of 24 ice cream bowls 5 liters. Weight: 480kg Width / length ~ 218,3 cm Depth ~ 106,9 cm Height ~ 130,8 cm Plastic / metal bracket accessories Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. Iiodpfxey Tnc To Anwsc Used machine - very good condition - checked and fully functional. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Version: heavy -Groove: 24 mm -Slot spacing: 80 mm -Quantity: 1 piece -Dimensions: 360/285/H245 mm Iijdped I Dbdsfx Anwjc -Weight: 70 kg

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version Iiodjxrk Iyepfx Anwoc -Length: 665 mm -Material: Cast iron -Bores: Ø 28 mm, groove 228 x 28 mm -Dimensions: see photo -Quantity: 2x mounting cubes available -Price: per piece -Dimensions: 300/200/H100 mm -Weight: 15 kg/pc.

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Ijdpfxexrkvko Anweic -Clamping cube: heavy version -Length: 665 mm -Material: Steel -Quantity: 2x mounting cubes available -Price: per piece -Dimensions: 665/200/H250 mm -Weight: 117 kg/unit

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Features and technical data: - with tilting spindle: 0° - 45° - with aluminium sliding table - Table size: 1100 x 620 mm - Working height: 880 mm - Sliding table dimensions: 900 x 200 mm - Sliding table travel: 900 mm - Spindle diameter: 30 mm - Spindle stroke: 150 mm - Speeds: 3100/4600/6200/8000 rpm - Motor: 4 kW - with 4-roller power feeder - Dimensions: 1200 x 1000 x 1400 mm - Weight: approx. 490 kg Iisdpfjy Si Arsx Anwjc Availability: short-term Location: 63934 Röllbach

Condition: new, overall weight: 122 kg, Equipment: second-hand vehicle warranty, HAKO SWEEPMASTER B650 PROFESSIONAL SWEEPING MACHINE - 3525 m²/h TECHNICAL DATA: Model: SWEEPMASTER B650 Manufacturer: Hako Type: Compact Sweeper Country of Manufacture: Germany Series: Professional Condition: NEW Wheel Drive: Yes Charger: Built-in Power Supply: Battery Battery Type: Sonnenschein GF1276V (12V 76Ah) Working Width (mm): 505 Working Width with 1 Side Brush (mm): 705 Dustbin Capacity (l): 35 Theoretical Area Performance (m²/h): 3525 Iisdpfjy Tm Nrjx Anwoc Weight, ready to use (kg): 122 HAKO SWEEPMASTER EQUIPMENT B650: Roller brush (polypropylene bristles) Side brush (antistatic bristles - MIX) Sonnenschein 12V 76 Ah battery Built-in charger Air filter Debris container WHY CHOOSE THE HAKO SWEEPMASTER B650 SWEEPERS? Maneuverable, quiet, and easy to use. The Sweepmaster B650 sweeper has a working width of 705mm, making it ideal for cleaning small and medium-sized rooms and outdoor spaces where maneuverability is essential. The intuitive control panel ensures easy operation and a quick learning curve for basic functions. The sweeper features a collection container with a convenient handle, making it easy to carry and empty. The device is made of high-quality materials that are resistant to impacts and chemicals. Like all HAKO products, the Sweepmaster B650 is proven in industrial applications, and the availability of parts and service guarantees a long service life of the machine.