Used Imv Presse Eccentric Press Double Column for sale (25,283)

Condition: used, pressure 150 t Table dimensions 1000 x 360 mm Bwsdpfx Ahoyuqdhemou voltage 400 V

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg Bodpfx Asyz Dr Tshmjwu In good condition

Condition: used, Year of construction: 2008, Pressure total: 100 ton Daylight: 1.400 mm Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN Bwsdoznn Upepfx Ahmeu max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

Condition: used, Year of construction: 1974, pressure 600 t distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled Bedpfx Ajyn R Dushmjwu die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1974, pressure 600 t Bwodpfjyn R D Ijx Ahmsu distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1974, pressure 600 t Bodpfxeyn R Dzo Ahmswu distance between columns 2600 mm stroke 900 mm distance table/blankh.,max. stroke up,adjustm. up 1600 mm table surface area 2500 x 1730 mm die-cushion pressure inside the table 250 t stroke of drawing cushion in table 400 mm die-cushion pressure in pusher 63 t stroke of drawing cushion in pusher 150 mm ram surface 2500 x 1730 mm column travel -side 1100 mm die-cushion inside the table hydraulic, controlled die-cushion in pusher hydraulic, controlled overhauled in 2005

Condition: used, Year of construction: 1983, pressure 100 t throat 375 mm stroke 20-125 mm no. of strokes 60 Hub/min ram - range of adjustment 80 mm table surface area 920x660 mm ram surface 700x450 mm hole in the table Ø90 mm Bwedpsxh Swhofx Ahmou tool hole in ram Ø50 mm weight of the machine ca. 8 t dimensions of the machine ca. 2100x1500x3300 m

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm stroke - stepless adjustable 30-140 mm Bjdpfsztfz Rox Ahmowu ram adjustment 63 mm weight of the machine ca. 2600 t

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations Bedpfjx U Eiaox Ahmowu - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: good (used), Year of construction: 1988, pressure 15 t throat 180 mm stroke 6 - 60 mm no. of strokes 145 Hub/min ram adjustment 40 mm table surface area 400 x 270 mm hole in the table 100 mm Bsdst Tqglepfx Ahmswu ram surface 120 x 100 mm dayligth 250 mm total power requirement 1,1 kW weight of the machine ca. 1150 kg dimensions of the machine ca. 0,96 x 1,34 x 1,88 m

Condition: used, pressure 63 t throat 315 mm stroke 16 - 125 mm Bsdpfx Ahotqm Dqsmowu max. distance table - ram 417 mm ram adjustment 70 mm no. of strokes 80 Hub/min table surface area 800 x 630 mm ram surface 500 x 400 mm total power requirement 6 kW weight of the machine ca. 5 t dimensions of the machine ca. 1,5 x 2,2 x 2,75 m

Condition: used, Year of construction: 1990, pressure 125 t throat 360 mm stroke 8 - 140 mm daylight, max. stroke above - ram adjustment above 500 mm ram adjustment 100 mm ram surface 800 x 400 mm table surface area 1000 x 720 mm clamping plate 990 x 670 mm clamping plate thickness 80 mm no. of strokes 60 Hub/min tool shank hole (depth x diameter) 90 x 50 mm Bwjdpfx Ahoyatx Eomju total power requirement 23 A weight of the machine ca. 11 t dimensions of the machine ca. BxTxH 2770 x 2520 x 2950 mm - Hydraulically operated Ortlinghaus clutch-brake combination - Belt drive - Hydraulic overload protection - Hydraulic connecting rod clamping - Motorized tappet height adjustment - Semi-automatic stroke adjustment - Manual TDC correction - Fixed table - Reverse switch (return) - Electric stroke counter - Electric preselection counter - Cam switch mechanism The machine is partially overhauled in-house as follows: - Disassembled, cleaned, and completely technically inspected - New paintwork (also available according to customer specifications) - New seals - New control cabinet with touchscreen, including wiring of the machine - Current press inspection

Condition: new, pressure 30 t throat 200 mm stroke 0 - 60 mm table: 400 x 600 mm Bjdpexabvkjfx Ahmowu table: 150 mm - Bohrung no. of strokes 140 Hub/min bore 40,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 300 mm total power requirement 3,0 kW weight 1.670 kg range L-W-H 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON

Condition: new, pressure 20 t throat 200 mm stroke 0 - 50 mm Bwsdpfx Ahexabrrsmju table: 360 x 550 mm table: 140 mm - Bohrung no. of strokes 160 Hub/min bore 35,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 240 mm total power requirement 2,2 kW weight 1.250 kg range L-W-H 1310 x 1250 x 1860 mm

Condition: new, pressure 10 t throat 160 mm Bedexaad Hjpfx Ahmswu stroke 0 - 40 mm table: 270 x 370 mm table: 100 mm - Bohrung no. of strokes 200 Hub/min bore 25,0 mm - Werkzeug compressed air max. 6,0 bar dayligth 180 mm total power requirement 0,75 kW weight 590 kg range L-W-H 1.168 x 1.010 x 1.670 mm

Condition: used, Single-column – Eccentric press EBU, Type 75 SKU Machine No. P 4598462, Year of manufacture 1962 Pressing force 75 tons Reach 300 mm Table area 800 x 620 mm Die opening 325 x 225 mm Slide area 470 x 180 mm Tool holder bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Slide adjustment 80 mm Maximum installation height approx. 420 mm Stroke rate 60 + 105 strokes/min Motor power 4 kW Power supply 380 Volts, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with shear plate in the slide - Tool monitoring system UNIDOR, Type APS MINI - Mechanically driven strip feed with strip straightener OSTERKAMP, Type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds through 2 V-belt stages on the gear pre-stage - Two-hand operation - Simple work area guard that can be swung open - Table height adjustment in the lowest position = threaded spindles for adjustment 50 mm below floor level Bsdpsdzqltofx Ahmjwu - Control cabinet and operator panel for tool monitoring located beside the machine - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons Good condition

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t dimensions (WxDxH) 1,6 x 2,3 x 3,3 m Bedozrpppspfx Ahmswu with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation

Condition: used, Year of construction: 1998, machine/vehicle number: 1 / 2000, Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Bodpfx Asyvz U Iehmjwu Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton Standard configuration Moving bolster front sidePin diameter 52 mmForce in microinches = 400 tA SIEMENS control system is installed The documentation is available.A packing list would be available, as an identical press has already been dismantled.

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm stroke 100 mm table surface area 440x320 mm ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm tool hole in ram Ø40 mm total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. BxTxH 1400x1200x2200 mm Bsdpfevnwd Dex Ahmjwu

Condition: used, pressure 150 t Table dimensions 1000 x 630 mm voltage 400 V Inclineable mechanical press with updated electrics (CE2004) and Bodpfx Ahsyqv Ahomewu bolster plates. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1989, pressure 150 t throat 310 mm stroke 30-120 mm no. of strokes 20-60 Hub/min ram - range of adjustment 90 mm table surface area 820x600 mm ram surface 550x430 mm hole in the table 330x200 mm table height 750 mm Bsdpfexh Sw Ujx Ahmswu tool hole in ram Ø50 mm weight of the machine ca. 9,5 t dimensions of the machine ca. BxTxH 2500x2500x3000 mm

Condition: used, Year of construction: 1969, Technical details: Bjdpfju Nfkxsx Ahmjwu pressure: 40 t throat: 220 mm stroke: 10 - 120 mm ram adjustment: 63 mm no. of strokes: 160 Hub/min distance table/ram: 300 mm Table dimensions: LxB: 440 x 620 mm passage opening in table: Ø 200 mm surface area of ram: 400 x 250 mm weight of the machine ca.: 2,52 t dimension machine xH: 1,5 x 1,2 x 1,3 m There is a clamping plate on the table: LxW: 440 x 620 with center hole Ø 100mm. A steel plate 380 x 325 x 27mm is mounted on the ram. The press is equipped with 2-hand control. *

Condition: new, pressure 400 t distance between columns 600 mm stroke 600 mm table-size 3000 x 1500 mm travel x / y 2200 x 900 mm working feed 7 mm/sec tank capacity 66 l working pressure 30-250 bar total power requirement 18,5 kW weight of the machine ca. 25 t dimensions of the machine ca. 3500 x 3500 x 3700 m 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke control in any position - X, Y, and Z-axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with the EC safety standards 2006/42/EC Machinery Directive, EN ISO 16092-01 and 16092-03 - Two-hand operation - Emergency stop button - Safety rope with switch around the press Bjdpfx Aozyvakehmowu 4. TRANSPORT AND INSTALLATION – The price includes transport costs, installation, and training at the customer's factory. – Hydraulic oil is not included in the price. – All handling costs (e.g., crane, forklift, etc.) are borne by the buyer. 5. WARRANTY – The machine has a 2-year manufacturer's warranty. – This warranty covers the delivery of all spare parts required for repair and service of the machine. Damaged parts will be returned to the manufacturer after replacement with a new part. – This warranty does not cover parts damaged due to improper use.

Condition: used, Year of construction: 2002, machine/vehicle number: 10857, Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Bjdpsvmfzbsfx Ahmowu Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm Automation

Condition: used, pressure 130 t throat 450 mm stroke 20 - 200 mm max. distance table - ram at biggest stroke 500 mm no. of strokes 80 Hub/min ram adjustment 110 mm table surface area 1400 x 880 mm ram surface 900 x 450 mm total power requirement 11 + 2,2 (Hydraulik) kW weight of the machine ca. 14 t dimensions of the machine ca. BxTxH 1,55 x 2,68 x 3,46 m Features: - hydraulic clutch - hydraulic overload protection - hydraulic ram adjustment - cam-operated shift mechanism Bodezupkfspfx Ahmswu - enlarged table The machine is being partially overhauled at our facility as follows: - complete disassembly and inspection - new paint job - new main drive - new separate control cabinet with touch panel, including machine wiring - Left/right work area enclosure with safety light curtain and cycle operation - New two-hand control panel on a separate stand