Used Ina Vla200544-N for sale (52,491)

Condition: used, Year of construction: 2006, Technical details: Bwodpfsyfg Udjx Ad Asl turning diameter: 360 mm turning length: 1000 mm total power requirement: 5,5 kW centre height: 180 mm swing diameter over longit. slide guides: 335 mm max. turning dia. over cross-slide: 198 mm bed width: 250 mm main spindle bore: 42 mm spindle turning speed range: 1-4000 U/min Tailstock diameter: 58 mm Morse taper tailstock: MK 3

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Bedpfx Aevptt Red Aowl

Condition: excellent (used), SUDA FC 1530 Steel Laser Cutter Material / Metal Laser type / Fiber laser Cutting area / 1500 x 3000 mm Cutting thickness / depends on the processed materials Laser source brand / RAYCUS RFL-C1000 Operating mode / continuous wave Configuration / 3-axis Supported cutting products / sheet metal and tube Cooling / air and liquid cooled using S&A CWFL-1000 chiller Cutting speed / depends on the material type Supported graphic formats / AI, PLT, DXF, BMP, DST, DWG, LAS, DXP CNC / yes Laser head brand / WSX Servo motor brand / Schneider Guideway brand / THK Control system brand / Cypcut Control system Operating system / CYPCUT system Power supply / 1000W Laser wavelength / 1080nm Working area / 1500 x 3000 mm Positioning / red dot pointer Height: 1850 mm Width: 2111 mm Length: 3450 mm Bsdjvkf Rdopfx Ad Aswl Weight (kg) / 2500 kg The offer concerns a SUDA FC 1530 steel laser cutter + S&A CWFL-1000 chiller. !The sheet metal straightener is listed in a separate auction!

Condition: used, Year of construction: 1973, Weight 3 t x-travel 1000 mm 110 Bwsdpfx Aswzyt Tjd Ajl milling-head swivable +/- ja

Condition: used, Year of construction: 1993, // currently being renovated in our workshops //   Manufacturer : Haagen & Rinau Model : Unimix SRM 200 Year : 1993 Type: vacuum mixer   Material : stainless steel   Vessel capacity: 406 L Maximum temperature: 143°C Pressure: – 1 / 3 bars   Double jacket capacity: 34 L Maximum temperature: 151°C Pressure: 4 bars   Slow mixing : Central stirring + scrapers. Fixed counter action Power: 7,5 KW Fast mixing: emulsifier at the bottom of the tank. Suction and recirculation of the product. Bodpfxex R Aqae Ad Aswl Power : 8 / 12 KW   Integrated electrical cabinet. Siemens S5 controller   Hydraulic unit: – Up and down of the cover with its mixing tool – Rotation of the cover with its mixing tool – Tilting of the tank – Up and down of the homogeniser at the bottom of the tank.

Condition: excellent (used), For sale: a set of professional SK40 AD/B 6×80 tool holders according to DIN 69871 standard. The holders are in good technical condition, complete – some fitted with VHM/HSS drills of various diameters. Shank diameter: Ø6 mm Length: 80 mm Clamping type: SK40, DIN 69871 AD/B standard Condition: used, fully functional, visible signs of use (discoloration from heat). Ideal for CNC machining centers, milling machines, and precision drill presses. Bsdpfx Ajxcx Uvsd Aewl

Condition: excellent (used), Professional Ø100 mm x 6 mm disc milling cutter with indexable inserts mounted on an SK40 arbor – Made in Germany. Ideal for fast and precise slotting, cutting, and side machining of steels, cast iron, aluminum, and other structural materials. The cutter is equipped with multi-edge inserts – ensuring high machining performance and long tool life. The set is in good working condition, ready for immediate use on a CNC machining center. • Cutter diameter: Ø100 mm • Cutting width: 6 mm • Indexable inserts • Mount: SK40 taper • Condition: used – 100% functional • Manufacturer: Made in Germany. Bsdpfx Aexllclod Aswl

Condition: used, Year of construction: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI40 - Year of construction 2003 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 12 Nm - DC motor X-axis power: 4 Nm - Motor pump power: 0.57 kW Dimensions: Bodsuwrz Hjpfx Ad Aswl - Machine weight: approx. 2200 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm 0 - 180 ° 2" (60.,3mm) mm stufenlos 0,5 - 2,0 1,5 kW 700 kg - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping Bodpeivqrbofx Ad Ajwl - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: good (used), Packing Line, Packing Machine, Hood Shrink Machine, Hood Shrinker, Film Wrapping Machine, Sealing Tool Sealing Tool, Tray Sealing Machine, Tray Sealer -Manufacturer: Reepack, sealing tool from tray sealing machine Inauen VC999/ TS 1200 N -Type.: 342201270 -Shell size: 270 x 170 mm -Cutting die: see photos for size -Dimensions machine: 540/520/H220 mm Bsdpsm Hd Rhofx Ad Aowl -Weight 49 kg

Condition: used, Central processing unit, control, switchgear, CPU, SPS, SPS control -Manufacturer: Mitsubishi, SPS control from tray sealing machine Inauen VC999/ TS 1200 N Bwsdpfxom Dyh Ae Ad Ajl -Type: FX2n-48MR-DS -Total dimensions: 295/90/H83 mm -Weight: 1.3 kg

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Bwsdpfoxab E Sex Ad Asl Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Year of construction: 2009, operating hours: 13,400 h, condition: ready for operation (used), functionality: fully functional, Salt Makina pusher centrifuge for sale. Year of production: 2009. Capacity: 8-10 tph. Its in good condition and runs smoothly. Regularly maintained and serviced yearly. Bedoxu A Spepfx Ad Aowl Sieves changed 1 and half year ago. They are almost new.

Condition: good (used), Plastic sheets, plastic laminate -various sizes -Thickness: 6 mm -Outdoor outdoor area: usable -on: 2 pallets -Sale: only complete set -Dimensions: 1450/3100/H340 mm -Weight: 720 kg Bwsdpfx Adjb A Nwpe Ael

Condition: ready for operation (used), Supfina 808-262 carriage unit with base plate, used, in good condition, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Bwsdpoxah Rnjfx Ad Ajl

Condition: ready for operation (used), Supfina Type 814 = 811-041.76:00-2 Chuck SN:1111, used, normal signs of use, 100% functional, scope of delivery as per photos Bwodexah Slspfx Ad Ael

Condition: ready for operation (used), Supfina Type 814 = 811-041.76:00-2 Chuck SN:1112, used, normal signs of use, 100% functional, scope of delivery as per photos Bwedpfx Adsxah Srs Asl

Condition: ready for operation (used), Supfina 808-261 tool spindle with tool holder, used, good condition, 100% functional, scope of delivery as per photos Bwjdpfx Asxah Rbod Asl

Condition: ready for operation (used), Supfina 808-262 carriage unit with base plate, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for charges for packing and transport separately! Bwodpfx Ajxah Rhjd Ael

Condition: ready for operation (used), Supfina Type 814 = 811-041.76:00-2 Chuck SN:1113, used, normal signs of use, 100% functional, scope of delivery as per photos Bedpfx Adoxah Sxo Aswl

Condition: ready for operation (used), Supfina 808-261 tool spindle with tool holder, used, good condition, 100% functional, scope of delivery as per photos Bedpfxsxah N Rj Ad Aewl

Condition: ready for operation (used), Supfina 811-261 Tool spindle with draw tube SN:349 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Bwodpfx Adjxah R Us Ajl

Condition: ready for operation (used), Supfina 811-507.4 feed device NC consisting of: ZARN 2052 TN needle axial cylindrical roller bearing, 811-507:03-2 bearing plate, 811-507.2:01-2 guide sleeve, 811-507.2:02-2 roller screw drive, used, normal signs of use, 100% functional, scope of delivery as per photos Bjdpjxah Sfjfx Ad Aewl

Condition: ready for operation (used), Supfina / Fiege HSP 060.200.03 tool spindle 811 16,600 - 32,200 max min-¹, SN:FS-27-000245, used, normal signs of use, 100% functional, scope of delivery as per photos Bwjdpsxah Rujfx Ad Asl

Condition: ready for operation (used), Supfina 811-261 tool spindle with draw tube SN:241, used, normal signs of use, 100% functional, scope of delivery as per photos Bwodpoxah Rzefx Ad Ael