Used Ingersoll Oil Hole Drilling Machine for sale (70,212)

Condition: good (used), Year of construction: 1989, double-sided processing from 280 to 2500 mm the following equipment is available on each side: saw drilling head with 3 drills Nwedszzprpspfx Agrjl dowel inserter 3 drilling units from above, at the front 2 drilling units from above, at the rear return transport from below

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit Nwedpfxsq Ii Dls Agrjl The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK BH40M Hinge Drilling Machine – Precise Machining of Furniture Fittings The CORMAK BH40M hinge drilling machine is a compact, efficient, and easy-to-use horizontal wood drilling machine designed for precise drilling of holes for furniture hinges. Ideal for carpentry and furniture manufacturing, the machine offers consistent drilling and stable tool guidance. Thanks to its intuitive design and robust components, the BH40M ensures high-quality work while maintaining ease of operation. Main Advantages of the Machine Without a Compressed Air System: Precise drilling for furniture hinges – an adjustable depth stop allows for drilling with full parameter control, minimizing the risk of material damage. Compact and stable construction – a rigid base with a large work table (790 x 390 mm) ensures comfort and safety. Compressed air-free – the lack of a pneumatic system translates into reliability and low operating and maintenance costs. A 0.75 kW motor – the head drive provides sufficient torque for working with Blum hinges and other hardware systems. Three working spindles – allow for simultaneous drilling of holes for the main hinge and side guides. Design and Technology The CORMAK BH40M model is designed with ease of use and durability in mind. A mechanical working head travel of 110 mm and manual control ensure full control over the work cycle. The 10 mm tool shank diameter allows for the use of standard hardware drills. Compact overall dimensions (800 x 630 x 780 mm) and a weight of 45 kg make this furniture hardware drill ideal for field assembly work. Precision and Efficiency Thanks to the optimally selected spindle speed (2800 rpm) and the ability to manually adjust settings, the operator can quickly and accurately drill holes for any standard hinge type. Adjustable drilling depth (up to 20 mm) allows for easy adaptation to various front thicknesses and hinge types. Stable workpiece clamping and parameter control minimize assembly errors and increase the efficiency of the entire process. The CORMAK BH40M hinge drilling machine is suitable for: kitchen, bathroom, and office furniture production, carpentry workshops and maintenance departments, service companies specializing in hardware installation, woodworking schools and training centers. Standard Equipment Three-spindle drilling head for hinges, mechanical guide travel (110 mm), adjustable depth stop, work table 790 x 390 mm, 0.75 kW (230 V) motor, manual control and workpiece clamping. Optional Equipment drill bits for Blum hinges and other systems, positioning templates for various types of fittings, sets of mounting plates and side stops. Nsdpfx Aow Hbwqogrewl Technical Data Table Dimensions 790 x 390 mm Guide Travel 110 mm Space Between Spindle and Table 155 mm Tool Shank Diameter 10 mm Number of Spindles 3 Max. Drilling depth: 20 mm Speed: 2800 rpm Workpiece clamping: manual Manual control Motor: 0.75 kW Power supply: 230 V Overall dimensions: 800 x 630 x 780 mm Weight: 45 kg

Condition: good (used), Year of construction: 1994, Used Jago K 21 PN dowel drilling machine Year of manufacture 1994, Machine No. 1178 For drilling cabinets, frames, fittings, and line holes in the 32 system Technical specifications Number of spindles: 21 Center distance between drill heads: 32 mm Tool holder shank: 10 mm Max. workpiece size: 880 x 2500 mm Max. workpiece height: 100 mm Max. drilling depth: 83 mm Nwodpfjwlgpcox Agrol Support table size: 940 x 410 mm Number of pressure cylinders: 2 2 side stops, approx. 1000 mm each 1 stop extension, approx. 1500 mm each Required air pressure: 6-8 bar

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, height adjustment type: electric, actuation type: electric, rotational speed (max.): 3,000 rpm, rotational speed (min.): 700 rpm, total width: 1,480 mm, total length: 4,440 mm, total height: 2,700 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, Vertical glass drilling machine with two opposing spindles – the hole is drilled from both sides at once, with no blow-out on the exit side and no need to turn the sheet. Brand new, made in Poland, CE. Batch drilling up to 20 holes – the cycle is programmed once, then the machine runs it on its own Automatic glass thickness measurement (±0.4 mm) – the PLC calculates spindle depth by itself Bar positioning accuracy ±0.7 mm – minimises cracking and chipping Hole chamfering – electronically controlled 7" HMI panel – operator training approx. 3 hours Modular design – servicing without dismantling the machine 10 years of remote online support from purchase, 12-month warranty Specifications: Dimensions 4,440 × 1,487 × 2,793 mm · weight 1,900 kg · spindle speed 700–2,800 rpm Nedpfezyb Srex Agrewl · max. drilling height 1,050 mm · max. sheet weight 200 kg · pneumatic clamping · drill cabinet for 70 bits · thin-wall bits 1/2", L=75 mm · float glass EXPOGLASS® – Polish manufacturer of glass processing machinery, 12+ years on the market.

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table Nwsdpeyfta Tofx Agrjl 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Slot drilling machine, like new, hardly used. Nedpfsy Tk Ufsx Agrjwl

Condition: excellent (used), Year of construction: 1972, machine/vehicle number: 42 473, Manufacturer: Meuser Type: M 70 R Year of manufacture: 1970 Condition: very good, fully functional Technical data: Overhang: 1800 mm Drill spindle mount: MK6 Nsdpfslp Iqmox Agrjwl Drilling capacity, max.: 120 Table size: 2000 x 1100 mm Rotary table: 700 x 700 x 500 mm Weight: 8000 kg With support column Hydraulic and electrical diagrams are available.

Condition: used, Vitap's smart solution for through-hole drilling and grooving with automatic return to the operator. Three controlled axes: - X-axis – continuous workpiece transport via a patented belt system. - Y-axis – drilling head movement, guided by rack and pinion. - Z-axis – drilling, guided by ball screw. Nwjdpfx Aszutqiegrjl The fewer limitations, the greater the progress! With our machine, we do not impose any limits on workpiece length. Simple TPA programming: - You can position the holes individually. - The machining operations are displayed on a virtual workpiece. - If the workpiece dimensions change, the holes can be automatically adjusted. Office software license – Power lies in tranquility. - Perhaps you have better ideas in a quieter environment? This allows you to make better use of the flexible CAD system. - With this license, you can write programs where they are developed and discussed, in the office. Color LCD TFT 19" 5/4 screen USB port for loading programs from any office workstation 3 password-protected access levels (operator, supervisor, assistance) Technical data: - 9 vertical spindles, individually controllable - 2+2 horizontal drilling spindles in X - 1+1 horizontal drilling spindles in Y - 1 grooving saw unit (saw blade diameter 100 mm) - Max. workpiece thickness 50 mm - Max. workpiece weight 50 kg - Max. workpiece size: X unlimited, Y 920 mm, Z 50 mm - Min. workpiece size: X 270 mm, Y 150 mm, Z 10 mm - Workpiece transport speed: 25 m/min - Spindle speed 3,600 rpm - Max. horizontal drilling depth, X and Y axes 30 mm - Max. vertical drilling depth 45 mm - Max. vertical tool diameter 35 mm - Max. horizontal tool diameter 12 mm - Motor power 1.7 kW - CE standard

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Nedpoz A D H Usfx Agrewl Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Dismantling, loading and installation can be carried out on request by our service team.

Condition: ready for operation (used), DAREX AP 5000 / Precision spiral drill grinding machine -CE marking -Grinding range 1.5 - 26 mm -Suitable for standard spiral drills (HSS cobalt, optionally carbide) -Grinding types: conical taper, and automatic cross-grinding (split point) Nwedsy U H Ecepfx Agrol to reduce the transverse cutting edge -Automatic operation -Various inserts Dimensions: L x W x H 0.5 x 0.5 x 0.4 meters / Weight 50 kg Errors and omissions excepted.

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK BBM40PNEU Hinge Boring Machine – Precision Machining for Furniture Fittings The CORMAK BBM40PNEU hinge boring machine is a compact, efficient, and easy-to-use woodworking drill designed for precise drilling of holes for furniture hinges. The machine performs exceptionally well in furniture production, offering repeatable drilling accuracy and stable tool guidance. Thanks to its intuitive design and robust components, the BBM40PNEU ensures high-quality work while remaining simple to operate. Key Advantages Pneumatic system – Pneumatic spindle lowering provides convenient and precise positioning as well as drilling repeatability, significantly improving efficiency and the quality of hinge installation. Pneumatic quick-connect system – Allows easy disconnection of the machine from a stationary compressed-air source, and together with its compact design, enables use as a hand-held drill directly on assembly sites. Precise drilling for furniture hinges – An adjustable depth stop located at the rear of the machine allows full control over drilling parameters, minimizing the risk of material damage. Compact and stable construction – A rigid base with a large worktable (350 × 300 mm) ensures comfort and safety during operation. High-power 1.1 kW motor – A uniquely powerful motor compared to competitive machines, providing sufficient torque for working with Blum-type hinges and other fittings systems. Three working spindles – Allow simultaneous drilling of the main hinge hole and the side pilot holes. Applications The CORMAK BBM40MAN hinge boring machine is used in: production of kitchen, bathroom, and office furniture, carpentry workshops and maintenance departments, Njdjxzdhropfx Agrewl service companies specializing in hardware installation, schools and training centers related to woodworking. Standard Equipment 3-spindle hinge boring head, pneumatic fence feed (110 mm), adjustable depth stop, 300 × 260 mm worktable, powerful 1.1 kW motor (230 V), 35 mm cutter + two 2 mm drill bits for BLUM hinges. Technical Specifications Specification Value Table dimensions 300 × 260 mm Fence feed 110 mm Distance between spindle and table 130 mm Tool shank diameter 10 mm Number of spindles 3 Speed 2800 rpm Workpiece clamping manual Control pneumatic Motor 1.1 kW Power supply 230 V Overall dimensions 350 × 500 × 550 mm Weight 20 kg

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Nwjdpswv Nq Rjfx Agrel Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Nwedpfxsxwaz Ho Agrsl

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and hole group drilling machine in system 32 Power connection 400V 0.75kW Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Nedpfx Ageumw Sberswl Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00

Condition: used, Year of construction: 1997, total width: 500 mm, total length: 700 mm, total height: 1,800 mm, Empty weight: 200 kg - Year: 1997 - Documentation available: No - CE certificate present: No - Power [kW]: 1.1 - Table length [mm]: 290 - Table width [mm]: 290 Nwjdpfx Agszry Ntersl - Drilling depth [mm]: 80 - Drilling capacity [mm]: 20 - Reach [mm]: 225 - Min. spindle speed [rpm]: 210 - Max. spindle speed [rpm]: 2580 - Transport dimensions: 700mm x 500mm x 1800mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, bore capacity in steel (diameter) 30 mm throat 250 mm bore stroke 130 mm spindle taper MT 3 MK table: 380 x 380 mm column diameter 98 mm turning speeds 75 - 3200 U/min feeds mm/U total power requirement 1,1 kW weight of the machine ca. 220 kg. range L-W-H 0,5 x 0,6 x 2,05 mm Gear drill Thread cutting device Left/right barrel Tilting work table. Lighting. 2 electric Speed levels. Depth stop. Gears run in oil. Packaging dimensions: 2100x400x710mm Nwjdpsu Imc Hjfx Agrsl Weight 260kg

Condition: used, Donau DR52 Drilling capacity in steel (diameter) 52 mm Arm length 1140 mm Workpiece height max. 830 mm Drilling capacity in cast iron 60 mm Taper MK 5 Table size 1100 x 620 mm Nsdpfx Agez D U Tzjrowl Drilling spindle stroke 225 mm Spindle speed range 28 - 1400 rpm Feed rate 0.1 - 0.5 mm/rev Total power consumption 10.0 kW Machine weight approx. 3.5 t Machine dimensions approx. 2.4 x 1.3 x 2.61 m

Condition: excellent (used), functionality: fully functional, TOYOSK 01C 550II-TMS Fixed 48 Multi spindle Machine Manufacturer: TOYOSK Type: 01C 550II-TMS Spindle diameter min.: M4x8 Spindle diameter max.: M4x15 Table size: 280x360mm Spindle speed: 430, 710, 1030 Power: 1.5kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings) Nwodpfx Agowcp Enorel If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg dimension machine approx.LxWxH: 0,73 x 0,56 x 0,22 m · Heavy, solid cast construction · Automatic gear lubrication via oil pump · Smooth running due to ground gearbox gears operating in an oil bath · High concentricity thanks to hardened and ground main spindle · Thread cutting device · Lockable main switch and motor protection switch · Optidrill B 40GSM additionally with automatic quill feed · Electric · 2 feed rates: 0.1 / 0.2 mm/rev · Coolant system Nodpfx Aoyli Sfsgrjwl · Drilling depth stop · 18 speeds: 50 – 1,450 rpm · 9 selectable speeds via gearbox lever on the front of the drill head *

Condition: ready for operation (used), Alzmetall AB 45 S Pillar Drill Machine, Drilling Machine Speed: 25-640 rpm Overhang: 350 mm Quill stroke: 180 mm Drilling capacity in steel: 45 mm Dimensions: approx. 1200 mm x 800 mm x 2300 mm (W x D x H) Weight: 950 kg You are welcome to come by for an inspection. Nsdszyp Axepfx Agrswl We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, arm length 2150 mm, drilling capacity 80 mm Nsdpfx Ageyzq Dpsrjwl weight 7000 kg

Condition: ready for operation (used), -Drill diameter: 5~25 mm Nwedpfx Aodgpltegrjl -Drilling depth: 1000 mm -Tailstock -Tank -Pump -Filter

Condition: good (used), Thread diameter: 22 mm Thread length: 30 mm throat: 300 mm Max. working height: 1100 mm Nodpji Nnutefx Agrewl Hole table: 360 x 500 mm Drilling depth max.: approx. 500 mm Distance between drill bits: 130 mm Power requirement: approx. 1.0 kW Nominal current consumption: 6 A Machine weight approx.: 1.4 t Machine dimensions approx.: 1.3 x 0.68 x 2.85 m Control unit: conventional Unique table for double-headed drilling with 4 material clamps. Size: 375x250 mm The lateral movement of the table is 150 mm

Year of construction: 2011, condition: used, machine/vehicle number: HG-0911-4801, This hebö – pipe drilling machine with accessories, machine type: RBV-12SV, is being auctioned off in our online auction "KGeschäftschließung Schellermann Metallbau GmbH - Vehicles, bending machine, welding equipment, workshop equipment, raw materials, and more." You can find this and many other items from the metalworking and workshop equipment sector on our RESTLOS auction platform. Machine details: Type: RBV-12SV Nwsdpfx Aez Erkgogrol Year of manufacture: 2011 Weight: 445 kg Scope of delivery: - Machine - Tool cart as shown in the pictures, function and completeness not checked. Any other items or objects shown in the pictures are not included in the scope of delivery.