Used Ital Form Vacuum Machine for sale (68,805)

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Müller Martini Progress S 24 or 25 inch Year of manufacture: 1996 Printing width: 20" Maximum printing speed: 335 m/min 5 printing units, type 2047 UV dryer: yes, see below 2 turner bars Camera: BST SHS 3000 Pro camera system Cross-cutting machine: yes, MM 2088 2-hole binding punch (24" & 25") Stack delivery: MM UNISTACK 2000 Turner bars: 2 units Cylinder circumference: convertible between 24" and 25" Additional magnetic cylinder (for punching dies) and a perforating cylinder Numbering tower: yes Color control: overall, manual ink zone control UV drying: Baldwin SpecTronic Iiedpfx Apsymdq Eecsa Spiral folding 24" and 25" 2-hole binding punch (24" & 25") Blanket washing system: no Unwinder 2036/2037 and rewinder 2033

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Iedpfeq A Um Rjx Apceia Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Iedohbu E Hspfx Apcsia Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Iijdpjn D Ew Iofx Apcsa Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Iijdpfx Apjq Nn Hcocja Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Condition: used, Tube ends – forming machine BLM (Italy) used tube end forming machine BLM for tubes with six-position turret Drive power: 7.5 kW max. tube diameter approx.: 40 mm Max. forming length estimated: 80 mm Weight approx.: 1.5 t Iiedpfx Apoymgckjcsa

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 45802, Handtmann RF 440 round former with vacuum filler for the automatic production of dumplings and balls with homemade quality. Year of construction 2021 very little used condition like new! Isdpfjyk U Ezex Apcoia

Year of construction: 2019, condition: like new (used), Marchenisi Group Box Forming Machine Model FRB500 Year 2019 Automated box forming machine. Form cartons with a Nordson hot melt glue pump. - fill cartons with sealed strips (robot) - indexing - insert booklet - seal lid with hot melt glue - index to serialised printing Iiedpfeybtnvex Apcja - carton discharge

Year of construction: 1992, condition: excellent (used), Roller Rolling Machine Make Abele & Höltich type BB 20 YEAR 1992 roll diameter 180 mm 5,5,kw 400 Volt space requirement : W.2400 mm depth 2100 mm Iiedpfxjg Tcn Ij Apcea height 1800 mm Documents available

Condition: ready for operation (used), Year of construction: 1994, A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible. Iedpfsyk Hb Uex Apcjia

Condition: new, Year of construction: 2025, Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. Isdpfx Apef Epzcecsia There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process with the lock forming machine LFM. After the process of locks forming are finished it’s necessary to put single hem lock into Pittsburgh lock and close it with a hummer or special Pittsburgh lock closing machine. After those procedures ventilation element is ready It’s very easy to work with our ventilation lock former machine LFM, because there are ruler guides so they help you to put metal in necessary forming position. Lock former machine LFM can be 380V (1.5kW engine power) or 220V (1.1-1.5kW engine power) depends on customer’s preferences. The machine is suited to work with color-coated metal sheets or stainless steel. We have been producing lock forming ventilation machines since 2008 year. So we have ready solutions for you to be the first Dimension: 110.00Sm x 51.00Sm x 100.00Sm Weight: 300.00Kg Maximum metal thickness: 1.2mm

Condition: new, Year of construction: 2025, Standing seam roof panel machine F3-39 (1.5 inches) Standing seam roof panel machine F3-39 logically complements the line of machines for double standing seam roof panels production we make. In Europe, the most common is 25 or 27mm lock high, but outside of Europe, in some parts of America and Canada regions seam metal roofing with 39mm lock high is also popular. That is why our company decided to start production equipment for such task, to expand sales geography, and to bring our products to more and more customers who may need it. Metal roof machine F3-39 has additional rolls for clip-relief rolling, which come as standard set of machine supply. Clip-relief is a small bend locating closer to the locks of panel and which make possible to hide fixation clips under the panel. Standing seam machine F3-39 has 8 pairs of main rolls to make the main part of the lock and a ninth stand to make clip-relief part. The rollers and base of machine are stronger comparing to standard version of equipment – roof panel roll forming machine F3. It has also rolls of bigger diameter to make 39mm (1.5 inches) lock. Despite all these increases, standing seam roof panel machine F3-39 is portable one, our customers can directly take it to construction place, and you can use it at the roof installation site as well. Thus giving the customer opportunity to reduce number of panel’s damages and the transportation cost. There is drawing of panel you can get with our F3-39 machine Roof panel roll forming machine F3-39 can make panels with clip relief or without it, depends on customer preferences. Machine can work with coated materials or without coating as well. Suitable for steel coils, copper aluminum, zinc etc. It’s possible to adjust gaps between rollers depends on material thickness customer use for forming. Standing seam metal roof machine has easy adjustable system to change the width of the panels. The machine operator just need to rotate adjusting wheel to make it happens As additional options you can get Length measuring device to set up number and lengths of panels; Ijdjq U N T Ropfx Apceia Cross cutting knife for metal cutting; Rolls for ribbed panels production; Floor decoiler; Hand seamers for lock closing; Sliding clip formers; Fixed clip former. Our company can produce other machines for metal roofing production: Standing seam metal roof machine F3 for 25mm lock high; Standing seam machine F3-27 for 27mm lock high; Snap lock roof panel machine SL-1; Automatic snap lock metal roofing panel machine SL-1 auto;

Condition: like new (used), Year of construction: 2019, operating hours: 25 h, functionality: fully functional, machine/vehicle number: 3820 345-19, total height: 2,020 mm, total width: 855 mm, total length: 2,580 mm, type of input current: three-phase, overall weight: 270 kg, film width: 280 mm, compressed air connection: 6 bar, number of blades: 1, input voltage: 380 V, product height (min.): 60 mm, product height (max.): 200 mm, product width (max.): 70 mm, product width (min.): 70 mm, path measurement accuracy: 1 mm, nominal power: 3 kW (4.08 HP), air demand: 3.6 m³/h, height adjustment type: electric, conveyor belt length: 1,000 mm, conveyor belt width: 300 mm, roll diameter: 300 mm, roll width: 280 mm, Equipment: documentation/manual, 4 seals (sachet) packaging machine, 2 lane, for liquid and semi-viscous products. Iijdeyt Iw Aepfx Apcsa Including: dosing unit and outlet conveyor dry contact (5A max) for external transfer pump to feed the 30 lt hopper 2 printers Markem 8018 (one per lane) photocell for printed film easy open tear notch

Year of construction: 2006, condition: like new (used), automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph Iedpfsdzrviox Apcjia

Condition: good (used), Year of construction: 2014, Food Machinery Co E4230 VFFS bagger 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph Iiodpfxjwtqrws Apcea

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, overall weight: 5,000 kg, We are offering this refurbished metal spinning machine UD320 CNC-Fanuc, fully overhauled in 2025. Iodpeykmmkofx Apcoia This is a metal spinning machine that has been completely refurbished by us and equipped with a new, modern Fanuc CNC control system. We currently own a total of 9 of these machines. Five of these machines have already undergone a retrofit with the Fanuc control unit. The overhaul of other components such as bearings, guides, and slideways is carried out either in-house or through external contractors. We are very familiar with these machines. The hydraulic unit has been custom-built to our specifications. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), GIC VFB4000 in immaculate condition. Was only used for a few weeks prior to the contract not going ahead. Can be supplied as a line with Multipond weigher (also only used for a few weeks) Isdpfjvtcqgox Apcjia

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, total width: 700 mm, total height: 1,135 mm, type of input current: AC, input voltage: 230 V, warranty duration: 12 months, power: 2 kW (2.72 HP), DGUV certified until: 03/2028, Universal Dosing Machine Model: U-Max Dosing with time and speed control Stainless steel construction Hopper capacity: 40 l Various accessories available Suitable for a wide range of fill materials such as pralines, jams, confectionery creams, honey, yogurt, creamy butters of both vegetable and animal origin, cream cheese masses, whipped cream, and even mixtures containing cut ingredients (herbs, nuts, olives, etc.). Dosing pistol with hose Including nozzle set: 12 pieces per set, single needle, flat nozzle 180-190 mm Connection: 230 V Dimensions: 700 x 870 x 1130 mm (W x D x H) New device With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Double needle Flat nozzle in special sizes Foot pedal LCD display Dosing programs Custom fabrication Maintenance contract Service package Iiedew S Sm Sspfx Apcea Delivery service Commissioning & training Visit our large machinery exhibition!

Condition: ready for operation (used), Year of construction: 2009, Roll width: 500mm, bag dimensions X/Y: 250mm/159mm, packaging capacity: 2 bags/cycle, filling weight range: 200g-250g, cycles: 50, control: Siemens Simatic S7-300, machine dimensions X/Y/Z: approx. 5800mm/2000mm/2300mm. Documentation available. On-site inspection is possible. Iiedpevtqrrsfx Apcea

Condition: ready for operation (used), Year of construction: 1996, Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025. Iijdpfx Aeu Rc R Sspcoa

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Iijdpfx Aox Ectuspcsa

Condition: ready for operation (used), A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible. Iodpeubbzzsfx Apcsia

Condition: ready for operation (used), Year of construction: 2011, A semi-automatic vacuum chamber packaging machine Multivac is available. Chamber dimensions X/Y/Z: 900mm/440mm/160mm, sealing bars: 2x440mm, sealing type: double-seam cut-off sealing, chamber height: 160mm, max. vacuum pump capacity: 150m³/h, machine dimensions X/Y/Z: approx. 1100mm/600mm/1400mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Iiodpexltvaefx Apcja

Condition: ready for operation (used), Year of construction: 2005, Two Beck MPX 240T are available, control panel: Siemens SIMATIC OP7, with documentation, on machine 1 the Teflon coating of the welding knife is partially damaged and must be replaced, on machine 2 the welding knife may have to be replaced, as well as the cover of the fan of the control cabinet. An on-site inspection is possible. Iijdswal Igjpfx Apcea

Condition: ready for operation (used), Year of construction: 2014, A Fuji horizontal flow-wrapping machine with integrated shrink unit and conveying system is available. Packaging capacity: 1000 bags/min, max. film width: 600mm, infeed screw: approx. 2300mm, max. product dimensions X/Y/Z: 200mm/250mm/100mm, material: stainless steel, machine dimensions X/Y/Z: approx. 4800mm/1300mm/1500mm. Documentation available. On-site inspection is possible. Iisdpfsvxi Uvjx Apcea