Used Ixion Bench Drilling Machine for sale (66,671)

Condition: good (used), Year of construction: 1990, machine/vehicle number: 3010164, Offer 25462 Technical Data: - Drilling capacity in ST 37 up to 32 mm - Drill spindle mounting with drawbolt thread M 12 / MT 3 - Drill spindle speeds: 120 to 1600 rpm - Drilling unit height adjustable via hand crank - Maximum distance table / drill-milling spindle: 650 mm - Drill spindle stroke with fine feed via handwheel: 130 mm - Drill spindle outreach: 205 mm - Drill-milling unit rotatable 360° Dedpfx Adsy Nabas Necg - Coordinate table with 3 T-slots: 730 x 210 mm - Table travel: X-axis 250 mm / Y-axis 200 mm - Drive: 400 V / 1.5 kW - Space requirement: approx. W 1150 x H 1100 x D 1100 mm - Weight: approx. 270 kg

Year of construction: 2009, condition: used, Used machine Year of manufacture: 2009 Condition: well-maintained Point-to-point drilling machine Working width: 800 mm Dsdpfx Adsw Tfxqo Nscg with grooving unit Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle in X-axis direction 1 drilling spindle in Y-direction Grooving saw unit in X-direction 3-axis control X: NC-controlled feed of workpiece via overlapping pneumatic clamping gripper Y: NC-controlled drilling movement Z: NC-controlled drilling depth adjustment Pneumatic roller hold-downs in feed area Pneumatic clamping gripper for transport DXF interface 15" color screen Keyboard including mouse Network card USB interface Max. panel width: 950 mm Max. drilling width: 800 mm Max. processing width for back panel grooves: 600 mm Max. feed speed (X-axis): 30 m/min Max. drill bit diameter: 35 mm Max. total drill length: 70 mm Connected load: 2.5 kW Extraction port: 100 mm Required pressure: 6 bar Working height: 900 mm Machine dimensions (LxW): 1650 x 2100 mm Availability: Short-term Location: Solingen

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 Center of spindle to wall or column 293 mm spindle turning speed - stepless 160 - 2250 U/min Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm Dedpfx Aeyvvm Sed Nscg T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: new, bore capacity in steel St 60 30 mm bore capacity in cast iron GG 20 30 mm Drilling capacity in St 60 30 mm Dedpfx Adsyvvmxo Nscg threading in St 60 M 16 threading in GG 20 M 20 Short spindle MK 3 spindle stroke 140 mm throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 132 / 724 mm feed von Hand spindle turning speed - stepless 225 - 4300 U/min total power requirement 1,0/1,6 kW weight of the machine ca. 260 kg

Condition: new, 40 mm threading in St 60 M24 threading in GG 20 M30 Short spindle MK 3 spindle turning speed - stepless 160 - 2250 U/min Dedpfsyvvmrox Ad Njcg Center of spindle to wall or column 293 mm Column diameter 115 mm spindle stroke 120 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle-table min. 117/701 mm feed 0,10 + 0,20 mm/U Motor output 1,45 / 1,9 kW height of the machine ca. 1840 mm weight of the machine ca. 285 kg

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) Dcjdpfx Aovn Sv Uod Nsg 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Condition: good (used), Automatic drill, drill, plate drill, row drill -Automatic drill: for advertising signs -Spindle mount: 12 mm (can be changed according to customer requirements) -Automatic drilling -Table size: 1200 x 1000 mm -Spindle stroke: 200 mm -Speed: 2800 rpm -Feed: via gear -pneumatic workpiece clamping -Pneumatic workpiece ejection -Dimensions: 1360/1520/H2180 mm -Weight: 450 kg Dedpfsddfhxsx Ad Necg

Condition: good (used), Knopp Duplex glass drilling machine double-sided. Year of manufacture 2000 Dsdpsq Umcnjfx Ad Njcg In good condition. With ball roller table, cross laser and infinitely variable speed control. Incl water cooling

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 991217, total height: 1,600 mm, total width: 2,300 mm, total length: 2,200 mm, feed length X-axis: 1,500 mm, feed length Y-axis: 120 mm, feed length Z-axis: 40 mm, drilling depth: 40 mm, spindle speed (max.): 2,800 rpm, rotational speed (max.): 2,800 rpm, collet bore: 13 mm, power: 15 kW (20.39 HP), drilling capacity: 35 mm, number of spindles: 2, workpiece height (max.): 40 mm, We offer this used COMEC multi-spindle drilling machine FFR 2+2 1200 + CA, year of manufacture 1999. Brand: COMEC di Bergamasco L. & C. snc Model: FFR 2+2 1200 + CA Type: Milling/Drilling Machine Serial Number: 991217 Year of manufacture: 1999 Dsdpfx Aey Idzhjd Njcg Additional information: COMEC twin-column drilling machine for wood Machine dimensions: 2200 x 2300 x 1600 mm Power: 15 kW Voltage and frequency: 380V and 50Hz Spindle speed: 2800 RPM Chuck: from 0 to 13 mm Drill diameter: 35 mm Supply: electric and pneumatic Drilling capacity: - Length: 100 to 1500 mm - Width: 15 to 120 mm - Thickness: 15 to 40 mm If you have any questions or need more information, please don't hesitate to send us a message or call us.

Condition: excellent (used), Number of spindles 4 Drilling capacity -25 mm Throat 205 mm Quill stroke 120 mm Spindle speeds 150-2'000 rpm Table size 1400 x 275 mm Dcsdpoy Iz Sdefx Ad Nog With tapping device MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads Dcsdpfx Adey Ixbvs Neg - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Djdpfx Aey Iw Tdjd Nocg Additional information incl. 15 plates

Condition: good (used), Year of construction: 1999, Drilling capacity in steel (diameter): 60 mm / MK5 Quill stroke: 310 mm Spindle speed: 28...2500 rpm Table size: 1470 x 986 mm Dcsdpfxoy Iw R Nj Ad Njg Total power requirement: 4 kW Machine weight approx.: 4.6 t

Condition: new, Year of construction: 2022, bore capacity in steel (diameter) 35 mm throat 350 mm bore stroke 180 mm thread dia. M 24 mm feeds 0,1 - 0,2 mm/U spindle turning speed range 100 - 1450 U/min spindle taper MT 4 table surface area 560 x 385 mm Djdpfsy H Nvbsx Ad Nscg Distance spindle/table max. 780 mm distance spindle/base plate 1320 mm voltage 400 V / 50 Hz total power requirement 1,5 kW weight of the machine ca. 0,46 t dimensions of the machine ca. 1,2 x 0,7 x 2,4 m • with cooling and thread cutting device, • adjustable bore depth with automatical switch-off, • left-/right rotation of spindle, • adjustable chip protection

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Dedpfxjyyxkho Ad Nscg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Dcsdpfxey Nltns Ad Neg Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: used, machine/vehicle number: 008527, X axis working area: 6175 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 21 Dedoy Nx Ufepfx Ad Nscg Total number of tool changer positions: 76

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: Drilling capacity: 16/20 mm (temporarily up to 23 mm) Dedpjy Ih Tzefx Ad Nocg Morse taper MK 2 Throat depth: 245 mm Drilling depth: 100 mm Column diameter: 82 mm Table size: 220 x 310 mm Motor power: 0.75 kW Spindle speeds: 340-530-900-1530-2400 rpm Weight: 132 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1998, Used machine Year of construction 1998 Dsdow Naabepfx Ad Njcg this machine can be used to drill corner bearings, fanlights and olives on loose or pressed frame wood The scanning is carried out at the rebate, the 8 stops for the corner bearing and skylight, as well as for the set timber and transom are automatically used after the timber has been positioned. The machine has an automatic program sequence with electrical control for the drilling motors, triggered by a safety foot pedal Pneumatic connection R 1/4" 5-6 bar Suction speed 25 m/sec. Suction nozzle diameter 120 mm Electrical connection 0.75 kW Space requirement 2950 x 650 x 1100 mm Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter) 80 mm Arm reach 2000 mm Dcjdpfx Aoy H Daued Njg Workpiece height - approx. 1300 mm Boring diameter in steel 100 mm Boring diameter in cast iron 115 mm Thread cutting in ST 60 M 68 mm Spindle speeds 16 - 1250 rpm Number of spindle speeds 32 Spindle stroke 550 mm Number of feeds 18 Feed range 0.06 - 3.0 mm/rev Distance spindle/baseplate 480 to 1800 mm Column diameter 500 mm Spindle motor 11 kW Lifting motor 4 kW Total power requirement 15 kW Machine weight approx. 8,500 kg Footprint 3200 x 1250 x 3600 mm with work table 1500 x 1000 x 500 mm

Condition: used, Format: 0x0 Equipment: 2 spindles Dodpfx Adoy Dudxs Nscg

Condition: used, Year of construction: 1992, Elcos 2 head drilling machine is a machine manufactured by Elcos in 1992, with a format of 45 x 150 mm. Currently stored in Germany, it features a drill distance of 45 - 150 mm, space behind the drill heads of 100 mm, and is a double head paper driller. It operates with a lever and is single phase 240 volts. The delivery terms are FCA. Format: 45 x 150 mm Dedpfxowvuubs Ad Nocg Equipment: Double head paper driller Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts

Condition: good (used), Year of construction: 2002, Station 1: Cutting components to length Station 2: Drilling in the end face at pitch dimensions of 27, 32 or 60 mm, to a depth of 95 mm Station 3: Additional drilling in the end face or blowing out the drill holes from Station 1 Station 4: Deflection testing Dcedsy Hv Uqjpfx Ad Nsg Processing of strips: possible with lengths between approx. 400/450 mm up to approx. 2500 mm

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm Dcodpfx Asd Supged Neg working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: good (used), Year of construction: 2002, Station 1: Cutting components to length Station 2: Drilling in the end face at pitch dimensions of 27, 32 or 60 mm, to a depth of 95 mm Station 3: Additional drilling in the end face or blowing out the drill holes from Station 1 Station 4: Deflection testing Dcsdpfxjy Hv Nue Ad Nsg Processing of strips: possible with lengths between approx. 400/450 mm up to approx. 2500 mm