Used Jllig Ts 100 V for sale (52,494)

Condition: used, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, tire size: 235/75 r17,5, Year of construction: 2022, Further information Chassis central axle trailer low bed Welded fine-grained steel construction, front gear support foot, telescopic rear support, wheel chocks with bracket, sheet steel mudguards over both wheels Towing device central axle trailer Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brakes, laser-measured axle/chassis to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) Brake system 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Njdpjqmc Rasfx Ag Dswf Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable, TTS bridge low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor, bridge length 5500 mm, trough at front and sides with load-lock profile for tensioning strap attachment (8 pieces at front, 16 pieces on each side) Note: Slight floor undulation possible due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. Pair of additional lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways, with handle on the ramps, covered with wood, with gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra approval and expert opinion (in accordance with §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear

Condition: new, overall weight: 2,700 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ - We provide you with the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #510 Please note that the images are sample images. Actual equipment and color may vary. STS V-1.5 Tank • 1,500-liter tank capacity • Tank hot-dip galvanized • Tank slightly inclined to the rear for easier cleaning • Hydraulic rear tipping at approx. 20° for emptying via electro-hydraulic unit • Side flushing port in the tank to remove contamination or blockages without opening the tank lid • Tank lid opens completely to the passenger side and is secured with hook bolts • Two-stage safety system as standard to protect the compressor from damage • Siphon separator – overflow with 2 balls and sight glass • Manometer on suction assembly with protective guard • Mechanical fill level indicator with color scale Njdpfxjyxkcys Ag Dewf Engine and Compressor • MEC 3000 vacuum compressor with 3,500 liters air output • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda GX 390 industrial engine – electric starter, oil sensor, control panel with ignition lock, battery, and tank • Internal suction hose to prevent damage to engine components • Silencer for vacuum compressor with oil collection • Stainless steel heat shield above exhaust • 1 liter of biodegradable compressor oil stored in oil bottle holder • 5-liter fuel canister in holder • Standard long-neck funnel for changing and topping up engine oil • All engine components and accessories housed in lockable aluminum engine box, powder-coated in desired color Chassis • Self-supporting chassis, fully hot-dip galvanized • Electrohydraulics with wired remote control • Low loader tandem chassis 2.7t • Track width matches cars and Sprinter for optimal driving • Lowest possible center of gravity for the suction tank • 2 axles with 1,750kg capacity each and independent suspension from a reputable manufacturer • Continuous welded V-drawbar • Robust fenders with metal lamp housings • Stake holders for quick securing of suction hoses with rubber bands • Storage options for tools and accessories Suction Tank • Inertia brake with reverse automatics • Automatically locking ball hitch • Reinforced jockey wheel • 13-pin cable connector Connections and Hoses • 2 x suction hoses (3”) 5m long with Perrot couplings • 1 x suction lance 3” (1500mm long) • 1 x Perrot connection (3”) at the bottom of the tank lid • 1 x Perrot connection (3”) on the right side in the direction of travel Custom builds and special equipment available on request – Check us out: For further detailed information and/or images, please contact us directly. A large selection of additional vehicles for SALE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is required to independently verify the condition and features of the goods. Sale is subject exclusively to our terms and conditions and exclusion of all warranties.

Condition: new, overall weight: 2,700 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for every application! - Delivery worldwide / Dealer inquiries are welcome! Internal number: #514 The images are sample images. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Nwodpfx Agjyxkcts Dsf Tank: - 1,500-liter tank capacity - Fully hot-dip galvanized tank - Tank slightly inclined to the rear for easier cleaning - Side rinsing port in the tank for removal of dirt or blockages without opening the tank lid - Tank lid opens completely to the passenger side and is secured with hook bolts - Equipped as standard with two safety stages to prevent compressor damage - Siphon separator - Overflow with two balls and sight glass - Pressure gauge on suction unit with protective shroud - Mechanical level indicator with colored scale Engine and Compressor: - MEC 3000 vacuum compressor with 3,500 l/min air capacity - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for vacuum compressor - Honda industrial engine GX 390 - Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank - Internal intake hose to prevent damage to engine components - Silencer for the vacuum compressor with oil catchment - Stainless steel heat deflector plate above the exhaust - 1-liter bottle of biodegradable compressor oil stored in a dedicated bracket - 5-liter petrol canister in holder - Standard funnel with long neck for engine oil changes and refilling - All engine tech components and accessories stored securely in lockable aluminum engine box, powder-coated in the color of your choice Chassis: - Fully self-supporting chassis, completely hot-dip galvanized - Low-loader tandem chassis, 2.7 t gross weight - Track width matches that of passenger cars and Sprinters for optimal driving stability - Lowest possible center of gravity for the vacuum tank - 2 axles, each with 1,350 kg capacity and independent suspension from a renowned manufacturer - Continuous welded V-drawbar - Robust metal mudguards with integrated lamp housings - Stake holders for fast securing of suction hoses with bungee cords - Storage options for tools and accessories Vacuum Tank: - Overrun brake with automatic reverse function - Self-locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Fittings and Hoses: - 2x suction hoses (3") 5 meters long with Perrot couplings - 1x suction lance 3" (1,500 mm long) - 1x Perrot connection (3") at the bottom of the tank lid - 1x Perrot connection (3") on the right side, in travel direction Special builds and equipment available on request - Check it out: For more detailed information and/or pictures, please contact us directly. You will find a wide range of other vehicles for SALE or RENT at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively subject to our general terms and conditions and under exclusion of any warranty.

Condition: used, mileage: 2,500 km, first registration: 04/2024, overall weight: 2,700 kg, next inspection (TÜV): 04/2026, Year of construction: 2024, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for any application! - Delivery worldwide / Dealer inquiries welcome! Internal number: #382 The images shown are sample images. Actual equipment and color may vary. STS V-1.5 Vacuum Suction Tank Trailer Tank - 1,500-liter tank capacity - Fully hot-dip galvanized tank - Tank is slightly inclined to the rear for easier cleaning - Side rinsing port in the tank allows removal of contaminants or blockages without opening the tank lid - Tank lid opens completely toward the passenger side and is secured with hook screws - Standard two safety stages installed to prevent damage to the compressor - Siphon separator - Overflow with 2 balls and sight glass - Pressure gauge on suction assembly with protective bracket - Mechanical level indicator with color scale Engine and Compressor - Vacuum compressor MEC 3000 with 3,500 l/min air capacity - Vacuum max. -0.8 bar (continuous operation at -0.5 bar) - Overpressure max. 0.49 bar - Maintenance-free V-belt drive for the vacuum compressor - Industrial engine (gasoline) - Electric starter, oil sensor, control panel with ignition lock, battery, and fuel tank - Internal suction hose to prevent exposure within the engine unit - Silencer for vacuum compressor with oil collector - Stainless steel heat shield above exhaust - 1 liter of biodegradable compressor oil stored in oil bottle holder - 5-liter gasoline canister in holder - Standard long-neck funnel for changing and refilling engine oil - All engine components and accessories stored in a lockable engine box - Engine box made of aluminum, powder-coated in the desired color Chassis - Self-supporting chassis, fully hot-dip galvanized - Low-bed tandem chassis, 2.7t GVW - Track width matches cars and Sprinter for optimal driving characteristics - Lowest possible center of gravity for the suction tank - 2 axles, each with 1,350kg load capacity and independent suspension from a renowned manufacturer - Continuous welded V-drawbar - Robust fenders with metal lamp housings - Stake brackets for quick securing of suction hoses with rubber straps - Storage options for tools and accessories Suction Tank - Overrun brake with reverse-automatic - Automatically locking ball coupling - Reinforced jockey wheel - 13-pin electrical connector Connections and Hoses - 2x suction hoses (3") 5m each with Perrot couplings - 1x suction lance 3" (1,500mm long) - 1x Perrot connection (3") at the bottom of the tank lid - 1x Perrot connection (3") on the right side in the direction of travel Notes & Service - Worldwide delivery possible - Dealer inquiries welcome - Special constructions & custom adaptations on request Nodpjyxkb Njfx Ag Dowf For further detailed information and/or photos, please contact us directly. A wide selection of other vehicles for purchase or rent can be found at: Specifications subject to change, prior sale, and errors excepted. The buyer is responsible for independently verifying the condition and features of the goods. Sale is exclusively subject to our general terms and conditions with exclusion of any warranty.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, We offer a lot of 23 identical, unused (New Old Stock) Festo pneumatic cylinders, model DNG-160-100-PPV-A-S2. Ideal for automation, heavy-duty clamping, pressing, or maintenance stock. Details: Quantity: 23 pcs Bore: 160 mm Stroke: 100 mm Max pressure: 10 bar Adjustable pneumatic cushioning (PPV) Compliance: ISO 15552 / VDMA Condition: Unused, stored with rod protection Njdpfx Agjwxfrpo Djwf rice: Single unit: €380 3–5 pcs: €360/unit 10+ pcs: €340/unit Full lot: €320/unit

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, with safety system for solvent-containing substances in accordance with DIN 1539, including exhaust air fan, supply air cage filter, and concentration monitoring, as well as a recirculating air filter wall inside the unit Completely overhauled, 12 months warranty -Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm -External dimensions (w x d x h): 1900 x 1430 x 2315 mm -Capacity: 1500 liters -Max. temperature: 300°C -Eurotherm Controller 2404 (20 programs with 16 segments each) -Eurotherm Recorder -Connection load: 29 kW -Including 6 grid shelves and V2A stainless steel support brackets -Minimum exhaust air flow: 360 m³/h -Maximum allowable solvent quantity: 36 g at nominal temperature of 300°C -Including concentration measurement -Window seals renewed -Net weight approx. 1200 kg -Including documentation, CE declaration Nodovcb U Aspfx Ag Dswf -Electrically tested and supplied with DGUV test protocol Inspection at our warehouse by appointment. We supply new and used industrial ovens. Contact us for more information! Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, paint dryer, tempering oven, heating oven, tempering oven, drying cabinet, chamber furnace, baking oven, recirculating air drying cabinet, recirculation oven, solvent oven

Condition: used, Rotary vane vacuum pump - oil lubricated Manufacturer: Leybold Type: Sogevac SV100 Voltage: 50/60Hz Nedpfjb Rnffsx Ag Djwf 230-400/460V N. suction capacity: 100 m³/h Ultimate pressure without gas bellows: approx. 0.1 mbar (99.9% vacuum) Status: Overhauled Warranty: 12 months Instruction manual with first file list Delivery time: after arrangement

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm Nsdpfxeyx Ihye Ag Dswf permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1993, pressure 100 t distance between columns 1900 mm Nodjvuui Dopfx Ag Djwf stroke 500 mm Distance table/ram, stroke up 800 mm table surface area 1850 x 1000 mm Hole in the table 160 mm table height over floor 850 mm ram surface 1850 x 800 mm Side window 540 mm speed down 400 mm/s speed up 400 mm/s working speed 20 - 70 m/min oil volume 900 l Power capacity 34,0 kW Weight 13,0 t Dimensions (WxDxH) 2,7 x 2,2 x 4,0 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic cutting impact cushioning, hydraulic ram interlocking No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1980, pressure 100 t stroke 20 - 200 mm no. of strokes 20 - 60 /min distance between columns 1230 mm Nsdovuk H Ejpfx Ag Dswf dayligth (stroke and adjustment up) 650 mm column travel -side 540 mm table surface area 1050 x 750 mm table height over floor 760 mm ram surface 1000 x 750 mm ram adjustment 100 mm power requirement 18,0 kW Weight 20,5 t dimensions of the machine ca. 2,8 x 1,9 x 4,3 mxmxm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with infinitely variable drive (PIV), pneumatic hydraulic clutch/brake combination (Desch), hydraulic overload protection in ram, semi-automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, motoric circular oil lubrication, two-hand and foot operation as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1991, pressure 100 t distance between columns 770 mm stroke 200 mm distance table/ram, stroke up 800 mm Table area 770 x 900 mm table height above floor 850 mm die cushion pressure in table 40 t die cushion stroke in table 200 mm die cushion area in table 600 x 600 mm Nedpfxevut Ufo Ag Dswf side window 600 mm ram surface 770 x 900 mm speed down 62 mm/s speed up 350 mm/s working speed 17,5 mm/s oil volume 700 l power requirement 42,0 kW weight 9,0 t Dimensions (WxDxH) 2,6x 2,0 x 3,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, cutting impact cushioning, depth stop No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - Video at seller's site before dismantling available

Condition: used, Year of construction: 1957, pressure 100 t throat 315 mm stroke 30 - 160 mm no. of strokes 40 /min distance table/ram, max. stroke up, adjustment up 460 mm table surface area 910 x 680 mm Hole in the table 400 mm table height over floor 800 mm passage to the back 400 mm ram surface 630 x 400 mm ram adjustment 80 mm power requirement 7,5 kW weight 7,5 t dimensions (WxDxH) 1,7 x 2,0 x 3,0 m SPECIAL DEAL Nedpfx Aevzxnwsg Dowf as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1994, Pressure 100 t distance between columns 910 mm stroke 600 mm distance table/ram, stroke up 1000 mm table surface area 1340 x 1085 mm hole in the table 705 x 405 mm table height over floor 800 mm side window 685 mm ram surface 1235 x 1000 mm oil volume 450 l capacity of ejector 7,5 t ejector stroke 150 mm speed down 380 mm/s speed up 185 mm/s working speed 28 mm/s oil volume 450 l Njdpfx Agovuk E Ij Dowf power requirement 15,0 kW weight 9,5 t dimensions (WxDxH) 2,3 x 1,9 x 3,6 m SPECIAL DEAL as is where is, NOT CHECKED WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12931*19911, Year of construction: 2020, This forklift is a returned lease vehicle. The technical data corresponds to the original invoice; the seller assumes no liability for this information. Box-frame chassis Box frame, bolted tanks, mudguards, 2+2 crane lugs – step on the left side, handrail on the left side – external rearview mirrors on the fender, high-mounted, per pair – driver protection roof, steel construction – mudguards front/rear Drive system (diesel engine, transmission, drive/steering axles) – standard engine air filter, 2-stage element, with insert & indicator – wheel nut protection (10–25 t) – ZF automatic transmission 4WG-191-B – Volvo TAD-881-VE (requires ZF-191), 185 kW/1175 Nm/1600 rpm / 7.7 L / 6 cylinders EU Stage V – engine pre-heater 220 V, electric – Turbo II heavy-duty air filter – Kessler drive axle D91 (W = 4600 mm) Load-sensing hydraulic system with pressure and flow control (low energy consumption) Variable displacement piston pumps, return filter (10 µm) – hydraulic functions for lifting, tilting, and spreader, 1 joystick, power steering – pressure accumulator for lift mast 60 bar/2L (shock absorbing) – Hydraulic Long Life Filter (HLL), 12,000 h, 3 µm, change every 4,000 h – hydraulic oil tank pre-heating (I) – additional hydraulic oil cooler Electrical system Nsdpfx Agjylyi Is Djwf 24 V electrical system, monitoring system, CAN-Bus, 7” color display MD4 – LED lights (position/indicator/headlights) & LED work lights (2 on fenders, 2 on mast, 2 rear lights) – additional LED work lights (3000 lumen) on lamp console – qty 4 – Additional LED work lights (3000 lumen) on the boom – qty 2 – additional LED work lights (3000 lumen) on the front fenders – qty 4 – lamp console on the cab roof – reverse alarm – LED beacon (on lamp console) – one (1) 400V/3-phase power outlet for all heaters Electronic machine control (EMC) EMC Master incl. MD4 controller, 7" touch color display (A) – EMC 106 complete monitoring (engine, transmission, hydraulics, levers/joystick & service) – EMC 114 electronic joystick with RPM ramp-up – EMC 123 ECO drive module (fuel functions & settings) – EMC 124 driver login (up to 20 logins) – EMC 125 data logging module (alarm+error) – EMC 129 hour meter – EMC 122 maximum speed (specified 20 km/h) OPTIMA – Driver's Cabin Cabin Optima (L x W x H = 1605 x 1480 x 1620 mm) – solid cab, 1 joystick, ventilation, 3 wipers – opening window (right+left), interior rearview mirror (right) – Electrical 24V / 10A / 12.5mm socket / front right – coat hooks (2x) on rear wall of cabin (left and right) – additional trainer seat, 2-point belt, left side – driver seat Isringhausen ISRI 6830KA/870 (air suspension, heating, ventilation, 3-point belt) – DAB/analog radio with Bluetooth, MP3, AUX, USB, 2 speakers – variable wipers front/roof/rear window – ACC air conditioning – electrical 24V / 10A / 12.5mm socket / cab roof right – electrical 12V / 10A / 21.4mm socket / front right – electric cab heater including power socket – long sun visors (roof and front window) – additional rearview mirror (left side) –

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, total length: 71,000 mm, total height: 4,000 mm, clearance between the columns: 2,700 mm, shelf height: 4,000 mm, number of shelf rows: 7, load capacity: 6,000 kg, frame height: 4,000 mm, load per truss pair (max.): 3,000 kg, Pallet Racking System 4 m high, each bay with 2 beam levels (clear width 2700 mm) Scope of supply: 32 frames, 4 m high 128 floor anchors 18 corner impact protectors 100 beams, 2.7 m long, 0.11 m high 150 mesh decks 89/110, load capacity 1000 kg 7 load capacity signs Delivery: free to site Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Free delivery to site / assembly location Njdpfx Agsyyny Es Dowf - Unloading from the truck is carried out by the customer using their own lifting equipment - Delivery to anywhere in Germany except islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, mileage: 433,031 km, power: 114 kW (155.00 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 1,136 kg, first registration: 12/2022, emission class: euro6, number of seats: 3, For information Nwedpfoyy S Ugex Ag Djf

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 2806J-E18TAG1, General information Field of application: Construction Weights Empty weight: 6.740 kg Functional Generator capacity: 550 kVA CE mark: yes Other information Fuel consumption: 94.5 Liter / Hour at 75% Load Generator: LL6114K Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1125 l Transport dimensions (LxWxH): 5,42x2,04x2,434 Production country: CN Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel Nwodpew A E T Ujfx Ag Def - Steel canopy - Tank = Remarks = EU STAGE 5 Compliant 50/60 Hz switchable frequency via terminal link 550 kVA Prime power Spark arresting silencer

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, STC-Ref:G-671-2399 Horizon VAC 100A + SPF200 + FCA 200a, Year: 2012 equipped with: - 1 stations type VAC 100 a Nwedpfx Asywhczog Def - short belt delivery - Trimmer FC-200 A - Stitching and folding unit SPF 200 A - 1 collating tower VAC 100 a - 2 stitching heads Hohner - monitor --> available: 04/2026

Condition: used, mileage: 6,900 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 07/2025, emission class: euro6, color: white, suspension: air, number of seats: 8, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill-Start Assist, F2W Winter Package, JA7 Blind Spot Assist, T56 Electric Operation for Left Sliding Door, T55 Electric Operation for Right Sliding Door, EY5 Mercedes-Benz Emergency Call System, BS1 Brake Calipers with Mercedes-Benz Lettering, EY6 Breakdown Management, B25 Electric Parking Brake, G43 9G-TRONIC, CM2 Bumpers and Attachments Painted in Body Color, FS5 Illuminated Mirrors for Sun Visors, EI0 Wireless Charging System for Mobile Devices, R1Q Alloy Wheels 8.0Jx19 10-Spoke Design, LG4 Tail, Brake, and Turn Signal Lights in LED Technology, RK1 245/45 R19 Tires, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 Lumbar Support Driver Seat, SE4 Lumbar Support Passenger Seat, QA4 Towing Capacity 2500 kg, T70 Child Safety Locks on Passenger Compartment Doors, ZC6 Sales Code 1, T74 Entry Handle, HH4 THERMOTRONIC Automatic Climate Control, UR1 Seat Rail System with Quick Release, V33 Carpet Floor in Rear, E1E Digital Extra: Hard Disk Navigation, V36 Roof Lining, E1D Digital Radio (DAB), Y10 First Aid Kit, MJ8 ECO Start-Stop Function, IB6 Model Series C447 Vito/V-Class, VL2 Velour Floor Mats, 806 AEJ X5/1, ES3 12V Sockets for Right and Left Rear Seat Rows, ES2 12V Socket in Trunk / Cargo Area, F3T Trim Elements in Olive Dark Grey Open Pore Wood Look, VD7 Black Interior Roof Liner, E1T Touchpad, H00 Warm Air Duct to Passenger Compartment, F3Z Comfort Closing, IK3 Luxury Van, HI1 Climate Zone 1 (Cold/Comfort), W64 Separately Opening Rear Window, US5 3-Seater Comfort Bench EASY-ENTRY 2nd Row Rear, US4 3-Seater Comfort Bench EASY-ENTRY 1st Row Rear, V44 Carpet Floor in Front Vehicle Interior, C6L Multifunction Steering Wheel, RM4 Comfort Tires, W68 EASY-PACK H. Nwjdoyxcd Aspfx Ag Djf We are available by phone Monday through Friday until 8:00 pm and Saturday until 4:00 pm! More Info: Leasing/Financing and Trade-ins possible! Errors and prior sale excepted! All information without guarantee ... more on our homepage

Condition: new, functionality: fully functional, power: 300 kW (407.89 HP), overall weight: 65,000 kg, tire size: 6*2, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 3 axles, emission class: euro3, Year of construction: 2026, machine/vehicle number: V9638J96, Equipment: all wheel drive, hydraulics, onboard computer, Sand and Gravel Production Plant | MINGYUAN Heavy Industrial Equipment A sand and gravel production plant is an integrated system designed for producing high-quality construction aggregates, including sand, gravel, crushed stone, and artificial sand. MINGYUAN provides complete aggregate crushing and screening solutions for quarries, mining, construction, and infrastructure projects, ensuring efficient material processing and consistent output. General Introduction The MINGYUAN sand and gravel production line combines advanced crushing, screening, washing, and conveying equipment to process raw materials such as limestone, granite, basalt, river stone, and quartz into various sizes of construction sand and gravel aggregates. The plant typically includes jaw crushers, impact crushers, cone crushers, vibrating screens, sand washers, belt conveyors, and dust collectors, forming a complete and automated production system. It is widely used in road construction, concrete batching plants, building materials, and hydropower projects. Capacity range: 30–1000 tons per hour (customizable) Feed size: ≤800 mm depending on crusher type Output size: 0–5 mm (sand), 5–10 mm, 10–20 mm, 20–40 mm (gravel) Main equipment: Jaw crusher (PE/PEX series), cone crusher, impact crusher, VSI sand maker, vibrating feeder, vibrating screen, sand washing machine, belt conveyor, and control system Power configuration: Electric or diesel-driven options available Automation: PLC control with real-time monitoring and adjustable output ratio MINGYUAN Heavy Industrial Equipment Co., Ltd. provides complete sand and gravel production solutions with reliable performance, competitive price, and professional after-sales service for global customers in the mining, construction, and cement industries. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. Nsdpfx Agsq Nia Is Dowf 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. Keywords Sand production line, gravel production plant, aggregate crushing plant, stone crusher, sand making machine, sand washer, vibrating screen, jaw crusher, cone crusher, impact crusher, VSI crusher, quarry equipment, mining machinery, construction aggregates, artificial sand, crushed stone, river gravel, limestone crusher, basalt crusher, granite crusher, sand washing plant, screening plant, conveyor system, MINGYUAN sand plant, aggregate processing equipment, stone crushing line, sand and gravel washing system, high-efficiency crusher, environmental sand plant, aggregate production line manufacturer.

Condition: new, Year of construction: 2025, Rotary vane vacuum pump in oil bath for work with MAP atmosfere ( hig % of O2) Available in stock. Completely new with 12 months warranty Nominal flow: 100 m3 / h at 50Hz. End vacuum: 0.5 mbar abs. Any clarification, do not hesitate to contact us. Njdpfx Agefk Size Djwf

Condition: used, Year of construction: 2011, mast type: simplex, Charger Nsdpfx Ajyvcmksg Dswf Mast type: Standard

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 1706J-E93TAG2, General information Field of application: Construction Weights Empty weight: 4.103 kg Functional Generator capacity: 310 kVA Other information Fuel consumption: 46.9 Liter / Hour at 75% Load Generator: FG WILSON LL5114N Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 667 l Transport dimensions (LxWxH): 4,085x1,514x2,277 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = Nwodpex S Um Nefx Ag Dof - Battery - Control Panel - Steel canopy - Tank

Condition: new, Year of construction: 2025, machine/vehicle number: 20250205007, Field of application: Construction Empty weight: 385 kg Nodpfx Agowqbq Eo Dewf Generator capacity: 100 kVA CE mark: yes Frequency: 50 Voltage: 400 Transport dimensions (LxWxH): 0,82x0,54x0,62 Production country: CN Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 1206J-E70TTAG, General information Field of application: Construction Weights Empty weight: 3.651 kg Functional Generator capacity: 200 kVA CE mark: yes Other information Fuel consumption: 32.4 Liter / Hour at 75% Load Generator: FG WILSON LL5114F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 822 l Transport dimensions (LxWxH): 4,085x1,42x2,367 Production country: CN Nodpfxjx S Umve Ag Dswf Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank