Used Karl Klink Gear Shaping Machines Karl Klink Rw 10 1963 for sale (88,457)

Condition: ready for operation (used), Year of construction: 2008, Fells axial forming machine with automated part feeding. Fsdpfxsz Dnt Uj Afujpn The machine was used to apply splines to tripod joints. CV joint splines, etc. The manufacturer specifies a maximum diameter of 50 mm for the spline working area. Further technical data can be found in the images.

Condition: excellent (used), Capacity Fjdpfxozql Ufs Afujpn M16 module Table diameter: 1,200 mm Maximum workpiece diameter: 1,500 mm Milling slide travel: 600 mm Table center hole diameter: 250 mm

Year of construction: 2012, condition: excellent (used), Railway machine Karl Deutsch - UWS 2500 MACH-ID 9494 Make: Karl Deutsch Type: UWS 2500 Year: 2012 stationary magnetic particle crack detector deutroflux uws 2500 for longworkpieces movable carriage for lengte adjustment Fedoy D Rugspfx Afuopn 2 phase shifted AC currents generate magnetic field thus, cracks in every direction are detected skin effect of AC uniform magnetization and demagnezation even in complicaties workpiece geometrie like cranckshaft new price EUR 250.000 Length:4500mm Width:1500mm Height:2300mm Weight:1750kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1981, Stankoimport gear hobbing machine 5K328A Year of manufacture: 1981 Fjdpozq Sq Hefx Afuopn Max. diameter of the gear wheel: - with counterbeam: 800 mm - without counterbeam: 1250 mm Max. module: 12 mm Max. width of the gear wheel: 560 mm Min. number of teeth: 20 Helix angle: +/- 60 degrees Table diameter: 935 mm Max. weight on the table: 2000 kg Hob arbor taper: Morse 6 Hob arbor speed range: 32 - 200 RPM Working feeds: - vertical: 0.5 - 5.6 mm/rev - radial: 0.22 - 2.6 mm/rev - tangential: 0.07 - 2.58 mm/rev Main electric motor power: 10 kW Net weight of the machine: 14 tons Change gears, arbors, and support available! Video of the machine in operation available!

Condition: used, Year of construction: 2015, overall weight: 16,000 kg, total height: 2,200 mm, total length: 4,410 mm, total width: 2,600 mm, GROB C6-A – Cold Rolling Machine Technical Data: Gear Module: up to approx. 2.3 Gear Diameter: approx. 8–80 mm Fpodpfx Afoz E Ra Hsuon Max. Clamping Diameter: approx. 315 mm Power: 25 kW Weight approx.: 16,000 kg Dimensions (LxWxH) approx.: 4410 x 2600 x 2200 mm Year of construction: 2,015 Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 679, overall weight: 8,000 kg, Equipment: documentation/manual, Höfler Helix 400k gear grinding machine Fedpfx Afjz Dqtweuspn The HÖFLER Helix 400k is currently in operation at our customer's production facility and is fully ready for use. An inspection and machine demonstration under production conditions can be arranged by appointment. The machine has been regularly serviced and maintained by Buss-Maschinenservice for several years. As part of the maintenance work carried out to date, all pneumatic hoses have been replaced, and several servo drives and servomotors have been overhauled or replaced. The mechanics have been inspected, and any necessary repairs have been carried out. The machine is being sold due to the purchase of new equipment. If desired, we will handle the complete machine relocation – from professional dismantling and packaging to transport, installation, commissioning, and customer training at the new location.

Condition: used, Year of construction: 2023, max. wheel diameter 200 mm gear width 60 mm max. module 5 min. module 2 workpiece weight max. 6,0 kg total power requirement 4 kVA weight of the machine ca. 0,5 t dimensions 1,35 x 1,55 x 1,7 m Less used Gear deburing machine - 3-jaw chuck ZG 125 - One twist in 5- 120 sec. - After test maybe modil 1,25 possible - Working Unit 1, milling function - Working Unit 2, brush function Fpedpfozy Satex Afuen - dust collector - automatic mode

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully reconditioned milling head from a Gleason Pfauter P210L – manufactured in 2004. Fsdpfxszr Hd Rs Afuspn

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm Fedpsyfnlkofx Afujpn For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Dressing device Grinding stones Turbo separator

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, position of the milling head: Schwenkbar (55°), table diameter: 170 mm, total length: 3,200 mm, gear diameter: 250 mm, total height: 3,000 mm, total width: 2,600 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 600 rpm, spindle speed (min.): 75 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 700 mm, overall weight: 12,000 kg, distance table to spindle center: 230 mm, tool diameter: 175 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, The WF 250 is the classic machine for gear cutting in the gearbox, drive, and supplier sectors: compact, rigid, and quickly retoolable. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems, ensuring full availability of spare parts and support. Proven Hurth module kinematics, new electrical systems, new drives, new safety technology: you get the performance of a new machine at a fraction of the price – inspected in Chemnitz, together with you. Fpsdpfsz Et A Rsx Afusn The machine mills spur and helical gears, as well as shafts, up to a module of 6 and a workpiece diameter of 250 mm. With an extended stand and counter-stand, long shafts and pinion shafts with a distance of up to 900 mm between the cutter axis and the table surface can be securely clamped. The milling head pivots by ±55°, the cutter speed ranges from 75 to 600 rpm, and the tangential travel of 240 mm utilizes the full cutter length for long service life. Technical data: max. workpiece diameter 250 mm, table diameter 170 mm, distance between cutter axis and table axis 40–230 mm, distance between cutter axis and table surface 200–900 mm, max. module 6, max. cutter diameter 175 mm, max. cutter length 300 mm, tangential travel 240 mm, cutter speed 75–600 rpm, swivel angle ±55°, total connection value 40 kVA. Installation dimensions approx. 3.2 × 2.6 × 3.0 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet of our own manufacture. The user-friendly interface enables easy setup and programming without in-depth G-code knowledge. Geometry acceptance is carried out according to manufacturer standards or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, an extended stand and counter-stand, a new paint job in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: used, Year of construction: 1994, Used CNC gear hobbing and milling machine Pfauter P800 / 1200 Fodez H Nuxepfx Afuspn For gear milling of spur and bevel gears.

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Maximum module 6 to 10 mm Fodpfxjcrd Nmo Afuopn Max. working diameter 320 to 800 mm

Condition: excellent (used), Weinig Powermat 400 four-sided planer max. planing width: 230mm max. planing height: 160mm 6 heads 2 vertical heads with powerlock 2 final horizontal heads with powerlock Spindle 1 - 7.5KW Spindle 2-3 - 11KW Spindle 4 - 11KW Spindle 5 - 11KW Spindle 6 - 7.5KW Powercom control system Fsdjzg Axgspfx Afuopn 40mm spindles feed rate via inverter, adjustment range: 5-30m/min Robust planer from WEINIG, machine inspected, well-maintained, in very good condition.

Condition: used, Year of construction: 1983, workpiece diameter 250 mm centre distance 0 mm honing length max. mm max. module 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features * Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. * All roughing and finishing infeeds can be adjusted by a decade switch; as well as by table reverse times and fast infeeds with preset times (1sec = Ø 0.04 mm), set on a potentiometer. Ampere display, etc. * Convex honing and conical honing are possible via templates. Asymmetric honing is also possible if the workpiece is prepared appropriately (i.e. pre-shaped). * Separate honing oil unit with magnetic separator and fine filter. * Mechanical tailstocks for manual loading. * Oil mist separator. * Sliding doors with foot switch. * Separate hydraulic unit. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Fodpfjt Hwzpsx Afujpn We have a large selection of gear machines available. Please let us know your requirements.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, working width: 800 mm, conveyor belt width: 800 mm, type of input current: three-phase, total width: 1,650 mm, total length: 1,000 mm, total height: 1,950 mm, Crescent Rolling Machine Universum LWT 3/80-HWM50I Suitable for all types of sticks such as Kornspitz and pretzel sticks, etc. Universal combination rolling machine For all dough types for wrapping and long rolling Rolling width 800 mm Stainless steel construction For roll lines with cross discharge Fpodpeywacysfx Afusn Capacity up to 3,000 pieces/hour Power connection: 400V, 16A CEE plug Dimensions approx.: 1650 x 1000 x 1950 mm (W x D x H) Used machine

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AH/109736, functionality: fully functional, input voltage: 400 V, edge thickness (max.): 2 mm, height adjustment type: mechanical, overall weight: 250 kg, Equipment: CE marking, machine in excellent condition, used very little practical and versatile edge gluing machine for carpenters for straight edges Fedpfx Aszvmygjfuspn for angled edges particularly suitable for edge banding of shaped parts READY FOR OPERATION

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Max diam 750mm, Z axial travel 900mm, X Radial travel 380mm, table 630mm, CNC Siemens 802D in Z and X. Weight ca 14.000kg Fpjdpfezbt Iiox Afujn

Condition: used, Year of construction: 2012, max. wheel diameter 300 mm gear width 320 mm max. module 10 min. module 0,5 control Siemens SIN840D max.helical angle 45 ° frequency 50 Hz voltage 400 V main fuse 125 A x-axis 270 mm y-axis 250 mm z-axis 320 mm A - axis +/- 45 ° B - axis 360 ° C-axis 360 ° total power requirement 89 kW weight of the machine ca. 23,5 t Fedpfx Afjx R U Hajuepn dimensions of the machine ca. 11,2 x 5,5 x 2,9 m automated Oil slinger station EWAB workpiece storage Hoffmann coolant filter system HSF 100 SE/K Minimax fire extinguishing system W+W air filter system Promot Automation "Cellmaster" (3 cells) year 2019

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m Fpsdpfov U T Dysx Afujn

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Fjdpfx Aeurulpofuspn Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote

Condition: good (used), Infeed conveyor for a four-sided planer with hydraulic drive TECHNICAL SPECIFICATIONS Working width: 300mm Working height: 200mm 6 material infeed chains Conveyor drive: hydraulic Fjdpjx Svn Iefx Afujpn Feed rate: 60m/min Hydraulic pump not included

Year of construction: 1964, condition: good (used), functionality: fully functional, machine/vehicle number: 2016, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 16,000 kg clearing length: 1.250 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 2,200 x 1,550 x 4,200 (without pit) Power supply / connected load: 380Volt 50 HZ Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and hydraulically mechanical in the feeder. The machine has been electrically (PLC Siemens S7) and mechanically modernized in 2004. The machine has an integrated coolant system. Fpjdpjt Dv I Asfx Afuen Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Fpjdpexvdryefx Afuon Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: ready for operation (used), Wheel width: 600mm, module range: 2-16, cutter dimensions X/Y: 240mm/280mm, table diameter: 1020mm, speed: 200rpm, swiveling: +/-45°, max. wheel diameter with/without counterholder: 1250mm/800mm. Machine dimensions X/Y/Z: approx. 4500mm/2100mm/3300mm, weight: approx. 16200kg. An on-site inspection is possible. Fpedpfxey Hk T Ij Afujn

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Fodpfx Afsyucd Hsujpn Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.