Used Klappverschluss Fastener for sale (482)

Condition: used, Monitoring module, safety module, controller, safety relay, relay -Manufacturer:Telemecanique, safety relay -Type: XPS-AL/SerieB -XPSAL5110 -Snap fastening on: 35 mm standard rail -Price per piece -Number: 6x available Iasdpjdngwcjfx Ahzjw -Weight: 0.2 kg

Condition: good (used), Screw clamps with shaft, pipe clamps, pipe fastening Iajdpfsb A Sl Sjx Ahzsw -DN: 10/12 -DN: 20/22 -DN: 25/28 -DN: 50/55 -DN: 65/70 -DN: 80/85 -DN: 100/102 Price: complete Package weight: 11.5 kg

Condition: used, Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamping brackets, pipe clamps, pipe clamps Iajdsiv A E Sopfx Ahzow -Pipe clamp: Pipe clamp with quick-release fastener -Clamping range: Ø 302 to 315 mm -Number: 5x clamps available -Price per piece -Dimensions: 325/95/H435 mm -Weight: 5.1kg/pcs

Condition: good (used), screw clamps, pipe clamps, pipe fastening, hose clamps, line clamps -Pipe clamps: 90 pieces -Type: Ø12x15 -Clamping range: 12 mm -Band width: 15 mm -Price/Delivery: complete -Dimensions each: 40/28/H15 mm Iodov A Sq Uspfx Ahzsaw -Weight: kg

Condition: used, Table shear cutting knife, replacement knife for table shear, replacement cutting, cutting knife, shear knife -Spare knife: for guillotine shears, from stock for guillotine shears Fischer DHS 12/3000 -Quantity: 4 pieces available -Lengths: 2x 2650/100/25 mm / 2x 450/100/25 mm Iasdpfx Ahoharuljzow -Hole spacing: 200/250 mm, see photos -Accessories: incl. Box with fastening screws -Price: complete -Weight: 126 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck type DURO-S chuck size Ø 160 mm -Passage: Ø 42 mm -Bolt circle: Ø 83 mm -Mounting: Short taper 4 / cone 56 - 62 mm short taper flange with Camlock fastening -Dimensions: Ø160 x 115 mm -Total weight: 9.6 kg Iaedpfx Aov Tlryshzjw

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange Iedpfjd Hcqyex Ahzsaw -Chuck flange with: driving pin -Outer diameter: 190 mm -Camlock fastening: DIN 55029 -Cone size: 5 -Hole circle: Ø 104.8 mm -Weight: 8 kg

Condition: new, mileage: 10 km, power: 131 kW (178.11 HP), fuel type: diesel, empty load weight: 2,900 kg, maximum load weight: 5,200 kg, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 3,650 mm, loading space width: 2,050 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, cruise control, differential lock, fog lights, full service history, lane keeping assist, non-smoking vehicle, onboard computer, power assisted steering, start-stop system, tachograph, traction control, trailer coupling, Vehicle with truck registration (Cat. N) Driver fatigue warning system DDAW Blind spot sensor integrated in the rear bar or at the rear overhang Blind spot monitoring system (2 sensors on the right side of the vehicle) Intelligent speed assistant – traffic sign recognition Monitoring system for the area in front of the vehicle when setting off (MOIS) CAB: Side mirrors mounted on arms for body width of 2.2 m Tinted windscreen Halogen headlights Widened wheel arches Fuel filler opening at the B-pillar of the cab Emission standard Euro VI lit. E Rear underrun protection, steel profile, with lighting Black radiator grille cover Daytime running lights (DRL) with bulbs Manual high beam activation Cab designed for a maximum width of 2000 mm Spare wheel in a pull-out basket under the rear overhang of the vehicle AdBlue tank 20 l (hidden in the entry area on the passenger side) Reversing signal with adjustable volume (72/55 dB) Batteries 2x12V 110Ah, for Daily 1x12V 110Ah Exhaust pipe centrally located under the vehicle between the axles Tow coupling 3.5 t Gross vehicle weight rating standard for vehicle type Wheel chocks, 2 pieces ESP system Fuel tank made of profiled plastic 70 l, filler neck in B-pillar (left side) Steel wheels Emergency brake system AEBS + City brake Mechanical parking brake with cable actuation Standard mounting of chassis components Splash guards for front axle Standard rear lights Tyres 195/75 R16 Acoustic comfort enhancement package Seat belt not fastened warning signal Telematics module Connectivity Box (4G) Warning triangle, 1 piece Central locking with remote control Thermal insulation of rear wall Lane departure warning system (LDWS) Tyre pressure monitoring system (TPMS), fitted at the valve Standard plastic headrests Standard key set with two keys (one key with remote if remote central locking is fitted) Steering wheel with soft plastic coating Digital tachograph DTCO 4.1, 1 day / 2 drivers, VDO Fabric seat upholstery (edges reinforced with vinyl) Heated and electrically adjustable exterior mirrors Automatic activation of lights and wipers COMFORT USB port A+C on driver’s side Infotainment system with 7-inch display Fog lights Iedpoziw T Refx Ahzoaw Cab ventilation and heating system with manual air conditioning Standard cruise control (CC) Air conditioning compressor 170 cm³ Comfortable driver’s seat with height-adjustable lumbar support (3-way adjustable, armrest) CONSTRUCTION 77742 Entry handles on A-pillar on both sides of the cab 72813 Electronic differential lock (Traction+) and hill start assist 00190 Steel cover for radiator and oil sump 06094 Two-stage multi-leaf rear springs (semi-elliptical) with auxiliary spring 00744 Window/windows in the rear wall of the cab 3-WAY TIPPER 3650x2050x400 Rear tailgate with opening and folding function, automatic rear tailgate opening system, side flaps for opening Wired remote control The floor is made of 3 mm thick hot-dip galvanized steel sheets 5-stage tipping cylinder with a maximum load capacity of up to 6 tons

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system Iajdpexpximofx Ahzsw - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button Iajdpfx Asu R Szashzjw safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: used, mileage: 15,438 km, power: 85 kW (115.57 HP), first registration: 06/2021, fuel type: electric, overall weight: 3,200 kg, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number: 263153 Former non-binding recommended price from the automobile manufacturer: 62,032 € ---- HIGHLIGHTS & PACKAGES * 2-way front speakers ASSISTANCE SYSTEMS * Mercedes-Benz emergency call system * Breakdown assistance Iajdpszh S S Sjfx Ahzsw * Headlamp assistant * Rearview camera * Rain sensor ENGINE, TRANSMISSION & CHASSIS * Basic chassis AUDIO & COMMUNICATION * Audio 40 * Communication module (LTE) for digital services * Digital radio (DAB) * Warning light for windshield washer fluid level INTERIOR * Caluma fabric, black * Lockable glove compartment * Driver's seat * LED light strip in the cargo area * Comfort overhead control panel * Airbag, passenger side * Semi-automatic TEMPMATIC climate control system * Climate zone 1 (cold/comfort) * Wooden floor * Passenger seat, two-seater * Tie-down rails on the side panel, attached to the seat belt * Partition, full height * Steering wheel adjustable for tilt and height * Seat heating for driver * Fastening points in the roof frame * Interior paneling of the cargo area up to roof height (wood) LIGHTS & VISIBILITY * Adaptive brake light TECHNOLOGY & SAFETY * Hill-start assist * Acoustic environmental protection * Multi-button remote control * Pedestrian protection EXTERIOR * Heat-insulating glass all around * Heated and electrically adjustable exterior mirrors * Rear door, two-leaf, 180 degrees, without window * Undercarriage panel, aerodynamic OTHER EQUIPMENT * Mercedes-Benz MobiloVan with roadside assistance and extended warranty * Wheelbase 3200 mm, long overhang * Model series C447 Vito/V-Class * Signage / Printed materials in German * Basic * Standard * Model update * Panel van * Weight variant 3,200 kg * Fleece battery 12 V 70 Ah * Speed limiter 120 km/h Further features * Digital extra: Live Traffic Information ---- Subject to prior sale and errors. The vehicle description is for general identification purposes only and does not constitute a guarantee in the legal sense. Please contact our sales team for detailed information on the specific equipment.

Condition: used, mileage: 44,209 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 06/2021, fuel consumption (urban): 8.4 l/100km, fuel consumption (extra-urban): 6.7 l/100km, fuel consumption (combined): 7.4 l/100km, CO₂ emissions: 194 g/km, emission class: euro6, energy efficiency: C, color: grey, suspension: steel, number of seats: 6, fuel: diesel, Equipment: ABS, air conditioning, airbag, all wheel drive, awning, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill Start Assist, LG2 LED Intelligent Light System, RK4 AMG light-alloy wheels 8 J x 19, diamond-cut finish, VL7 AMG floor mats, D27 electric glass sliding-tilt sunroof, PS2 AMG Line, C1L AMG front bumper with trim elements in black, FB1 AMG trim elements, FB4 AMG rear spoiler on tailgate, JS1 360-degree camera, EZ6 Parking Package with 360-degree camera, ZK9 pop-up roof, Z3N Night Package, Q50 removable ball-type tow bar, EX8 Navigation Plus, EY5 Mercedes-Benz emergency call system, BS1 brake calipers with Mercedes-Benz lettering, EY6 breakdown management, VB3 fly/mosquito screens for sliding windows, G43 9G-TRONIC, CM2 bumpers and add-on parts painted in body color, FS5 illuminated mirrors for sun visors, FK4 grille painted black, FC1 electronic key in chrome finish, JK5 instrument cluster with color display, LG4 tail, brake, and indicator lights in LED technology, RK1 tires 245/45 R19, LG8 High Beam Assist PLUS, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 driver’s seat lumbar support, SE4 passenger seat lumbar support, ZK8 roof bed, ZK7 Marco Polo, T70 child safety locks on rear doors, T74 entry grab handle, HH4 THERMOTRONIC automatic climate control, UR1 seat rail system with quick-release fasteners, E1E Digital Extra: hard disk navigation, V36 roof liner, E1D Digital Radio (DAB), Y10 first-aid kit, MJ8 ECO start-stop function, E1F display diagonal 26 cm (10.25”"), IB6 model series C447 Vito/V-Class, ES3 12V sockets for rear seat rows right & left, ES2 12V socket in boot. We will gladly prepare an individual financing or leasing offer and will accept your used vehicle in part exchange. We look forward to welcoming you to our dealership for further consultation. Vehicle condition in accordance with age/mileage, post-refinishing was carried out as part of reconditioning. No liability for printing or typographical errors. Subject to change and prior sale. ... more on our homepage Iedpfeyvyumjx Ahzjaw

Condition: used, Quantity: 4 available Manufacturer: Cleco Model: 18ESE12D3 Product type: Electric torque screwdriver Condition: used Design: Inline screwdriver Application: Industrial series assembly Drive: electric Use: Controlled screw fastening Suitable for: Production and assembly lines Industrial design: yes Iedpfszhnzcox Ahzeaw

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21320-33176, daxner WM 5-A-A 400 Rotating paddles generate centrifugal force, which presses the material through a stationary screen. Particles smaller than the screen mesh size pass through the screen, while particles larger than the mesh size are discharged via the coarse material outlet. Design: → Stainless steel housing with robust front plates on both sides → Rotor shaft with paddle assembly and ball bearings → Double shaft sealing rings Iaedozgt D Tjpfx Ahzow → Easy-to-clean design with removable front plate, including quick-release clamps, safety switch, and tilting mechanism → Connecting set for the inlet pipe with a quick-release fastener → Discharge hopper with a joint for the outlet pipe, including a 90-degree bend → Overflow tank made of shatterproof, transparent acrylic glass (capacity: 4 liters) → Drive with a 3-phase AC motor, 0.55 kW; 400 V; 50 Hz Output: → Up to 5,000 kg/h of wheat flour at a 2,000-micron mesh width Screen basket: → Nitex, standard 2,000-micrometer mesh → Diameter: 185 mm, Length: 385 mm, or as specified Option: → Optional dust explosion-proof design (ATEX) Material of sieve: stainless steel Material of coarse material outlet: steel coated Inlet: max Outlet: Outlet 2:

Condition: used, axle configuration: 2 axles, first registration: 02/2023, next inspection (TÜV): 03/2027, Year of construction: 2023, Load securing: Body certified to EN 12642 XL. Beverages certificate. Daimler 9.5 certificate. 2 identification plates at the rear, 565x200, ECE-R70, vertically on the rear panel. Vehicle complies with EC type approval with Certificate of Conformity (CoC). 1 foldable GGVS sign. Front crossmember height 125mm, rear 400+28mm, Smart Generation. Chassis: Standard version. "MODULOS" bolted chassis. E-bike carrier, cantilevered, bolted for 2 e-bikes, behind the unit. 10-year warranty against rust-through (see warranty conditions). Wheelbase 7700 mm. Axle spacing 1310/1310 mm. Outer frame: Speed Curtain on both sides. Underrun protection. Kingpin: 2" according to SAE standard, exchangeable. 1 kingpin position: 1690mm. Lateral impact protection in combination with pallet box. Starting aid (liftable front axle), activation "3x braking". Circular movement with lifted 1-axle not applicable. Starting aid (liftable front axle), activation "3x braking". Only permitted for use as a starting aid. Model SCS 24/L - 13.62 E B. Manufacturing date: 01.02.2023. Body length: 13620 MM. Body width: 2480 MM. Front panel height: 2400 MM. Body height at the front: 2680 MM. Body height: 2680 MM. Passage height: 2600 MM. Passage height: 2600 MM. Overall height at the front (unladen): 4002 MM. Overall height at the rear (unladen): 3907 MM. Loading height at the rear (unladen): 1197 MM. Tire size: 385/65R22.5. Total weight (permissible/technical): 36000/39000 KG. Payload (permissible/technical): 28875/31875 KG. Unit load (permissible/technical): 24000/27000 KG. Saddle load (permissible/technical): 12000/15000 KG. Unladen weight: 7125 KG. Saddle height (unladen): 1155 MM. Ride height: 270 MM. Wheelbase: 7700 MM. Rear door height: 2648 MM. Rear door width: 2480 MM. Brake disc diameter approx. 430mm. ROTOS SCB running gear system (disc brake). Axle: SCB 9 t, SP2040, FM1300, ET 120, disc brake 430 mm. Wheel fastening by center centering according to DIN 74 361 Part 3. SCB air suspension Type: MRH-KM30. Two-circuit compressed air braking system with standard couplings. Steel air tank. EBS 2S/2M with stability program. EBS power supply via ISO 7638 + CAN. Double-membrane spring accumulator cylinder. Lifting and lowering device with AUTO-RESET function. 2 wheel chocks with holder. Support jack, manufacturer: "JOST", semi-round foot with plate, one-sided operation, low maintenance. 1 LED lighting system 24V with multi-chamber lamp and dynamic turn signal. 2 sockets, 7-pole, 1x DIN ISO3731 / 1x DIN ISO1185 and 1 socket ISO12098. Continuous lamp carrier, white, with "SCHMITZ" embossing. LED side marker lights linked to the turn signal. 1 pair of LED side marker lights. Without rear warning system / ramp assistance. Tire brand: SCB ""SELECTION"" Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone. Regional traffic tires (M + S). 6-ply 385/65R22.5 (11.75x22.5). Steel wheels, ET 120. Protective caps for wheel nuts. Anti-spray mud flaps with Schmitz logo. Lashing eyes: 30 pairs in the outer frame, 2 tons tensile force per eye, according to EN 12640. Ram protection for the Speed Curtain running rail. Pallet stop, straight, on both sides of the outer frame, 19mm high, inner dimension 2460mm. Rubber ram protection on the rear. 2 rubber ram buffers vertically on the lamp panel. Pallet box for 24 Euro/16 ISO pallets. Pallet box ground clearance: 286 MM. Holder for light and brake connection at the front of the headboard. 1 extendable ladder at the rear. C00510 Speed Curtain body on b Iaedpfxszg R Hrs Ahzew

Condition: used, mileage: 99,900 km, power: 100 kW (135.96 HP), first registration: 05/2017, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note: Sales are primarily offered to commercial customers. Internal ID number: [3232] ----Optional extras: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery * Financing available, even without a down payment * Trailer hitch / reversing camera can be retrofitted upon request! * Spring special: Upon request and for an additional charge of only €999, the towing capacity can be increased to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * Euro 6 standard * Accident-free * Automatic transmission * Long wheelbase * Large multimedia display * Cruise control * Trailer hitch * Reversing camera * 3 seats Special equipment: Exterior mirrors, electrically foldable, exterior mirrors, electrically adjustable and heated, both sides, Driving Assistance System: active parking assistant, wooden floor in the cargo area, interior filter: pollen filter, ambient lighting in the passenger/cargo compartment, fuel tank: enlarged, steering wheel (steering column mechanically adjustable), steering wheel with multifunction buttons including trip computer, PTC heater, seats in the cab: co-driver's seat as a double seat, seats in the cab: driver's seat heated, trim in the cargo/passenger compartment: plywood, heat-insulating glazing, two-way speakers at the front Additional equipment: 3rd brake light, adaptive brake lights, airbag on the passenger side, airbag on the driver's side, hill start assist, exterior mirrors, aspherical, both sides, outside temperature display, fastening rails for roof racks, brake assistant, braking system with ABS+ASR, roof light in the cargo area, driving assistance system: attention assist (fatigue detection sensor), driving assistance system: crosswind assist, windshield with antenna, generator 150 A, cup holders at the rear, cup holders at the front, seat belt pretensioners, grab handle on the passenger side, glove compartment lockable, body/superstructure: standard van, body/superstructure: long, cargo area partition, load securing/tie-down points, engine 2.1 L - 100 kW CDI CAT, rear fog lamp, wheelbase 3200 mm, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment on the right, safety belt system with warning system (driver/passenger side), seat cover/upholstery: fabric, trim on window pillars, trim in the cargo/passenger compartment: hard fiber, half-height, lashing rails in the cargo area - side wall to roof frame, service interval display Assyst, permissible total weight 2.80 t ----Would you like to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Note: All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are reserved. Iaedjzg Staspfx Ahzjw The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of more than 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: new, mileage: 10 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,600 mm, loading space width: 2,280 mm, loading space height: 2,450 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, * Vehicle: * Opel Movano 2.2 with a 132 kW engine (179 hp) Iedpfxjzhd I Sj Ahzoaw * Electrically adjustable exterior mirrors * DAB radio * Multifunctional steering wheel * Bluetooth * Full-size spare wheel * Daytime running lights * Halogen headlights * Rearview camera * Lane keeping assist * Emergency brake assist * Airbag on driver's side * Multifunctional steering wheel * Body/superstructure: Furniture box * Engine 2.2 L - 132 kW * Start/stop system * Low emissions, compliant with Euro 6e emissions standard * Seats in the cab: Double passenger seat * Driver's seat: Active * Superstructure: * Premium box * Lighting in the box * Lockable portal doors * Omission of side door * Airline rail integrated in the floor * 2x rod rail (800mm and 1600mm) * Lateral fastening, airline type * Lockable toolbox If the vehicle is not in stock, a short delivery time is possible! * Ask us about an individual leasing or financing offer. * Net export possible. * Delivery from €199. Didn't find the right vehicle? Configure your own vehicle! Whether it's equipment, superstructure, or engine variant. All at a fair price! You can also purchase just the superstructures for your existing vehicle from us! Don't hesitate to contact us! * Images may show optional equipment that is not included in the basic price. ---- * The information provided on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typographical and data transmission errors / changes / input errors. Please verify the accuracy of the equipment features directly on the vehicle before purchase. Errors and prior sale are subject to change. This advertisement should be understood as an invitation to submit an offer.

Condition: excellent (used), Year of construction: 2022, Holzkraft Raw Air Extraction System Type: ASA 7703 For milling, planing, and saw chips (not suitable for dust) The 180° rotatable extraction unit allows suction guidance from below or above Robust metal impeller Equipped as standard with a high-quality mobility kit for increased stability and easy maneuvering Quick-release fasteners for filter and chip bag Iaodpfx Asy Ahpxshzjw Dimensions and Weights: Length (approx.): 1900 mm Width/Depth (approx.): 670 mm Height (approx.): 2800 mm Net weight (approx.): 88 kg Chip collection volume: 2 x 290 l Outer diameter of inlet extraction nozzle: 260 mm Outer diameter of outlet extraction nozzles: 3 x 120 mm, 1 x 100 mm Electrical Data: Motor speed: 2950 rpm Connection voltage: 400 V Power supply frequency: 50 Hz Input power: 4.8 kW Output power: 3.8 kW Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal airflow: 7700 m³/h Maximum negative pressure: 2800 Pa Location: Available from stock, 54634 Bitburg - Immediately available -

Condition: used, mileage: 74,000 km, power: 110 kW (149.56 HP), first registration: 04/2020, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 06/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,304 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,820 mm, loading space height: 1,340 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Well-maintained VW T6 L2 long wheelbase panel van, 110 kW, with high-quality features, ideal for trades and businesses. ALUCA workshop/shelving system (details below) Trailer hitch with 2.5 t towing capacity Chassis: Reinforced suspension and damping Auxiliary heater, programmable and with remote control Heated driver's seat Climatic air conditioning with pollen filter Driver comfort package with armrests on both sides, fold-out, adjustable in multiple ways: - Seat height, backrest, lumbar support Adjustable backrest on passenger seat Fabric Simora seat upholstery Driver assistance systems: - PDC Park Distance Control front and rear, with optical and acoustic display - Rear view camera - Cruise control - Hill start assist - Driver fatigue detection - Trailer stabilization - Tire pressure monitoring display - Brake assist (HBA) - Multi-collision brake - ABS, ASR, ESP Audio-navigation system Discover Media (touchscreen color display) - Radio, CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free system for mobile phone with Bluetooth - Mobile Online Services Car-Net - App-Connect (Android Auto and Apple CarPlay) prepared, can be activated - Voice control prepared, can be activated Iodjzh Inpjpfx Ahzoaw Multifunction display Plus / On-board computer Driver and passenger airbags Electrical package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control 12 V socket in the front (2x) Fog lights with cornering lights Vehicle has a speed limiter set to 135 km/h 2nd battery with separating relay Driver and passenger airbags Wheelbase 3400 mm Sliding door to the cargo area with tinted glass Rear door with tinted glass, heated, with windshield wiper Truck registration N1 / Van 17" chassis Engine 2.0 L - 110 kW TDI 6-speed manual transmission Adjustable steering wheel Non-smoker package Grips on A-pillars Thermal protection glazing Jack Cargo area equipment: Aluca workshop system (similar to Bott, Sortimo, Würth). Left side: shelving system: long storage compartment, storage bins, and 4 drawers. Right side: shelving system with storage bins, storage compartment, and 3 drawers. Fold-out workbench. Cargo area partition with window. Robust wooden floor. Load securing with eyelets and fastening rails. Ceiling lined. Ventilation. LED lighting. 4x 12V sockets. Electrical systems: External 230V socket (input). 230V / 1000W voltage converter. Charger for 2nd battery (powered via external 230V connection). Connection cable not included. Cargo area dimensions: - Length at the bottom: approx. 282 cm (without ALU plate on the partition) - Length in the middle: approx. 271 cm - Length at the top: approx. 261 cm - Height: 134 cm VW service records: 12/2021 at 19,738 km, oil change 03/2022 at 23,481 km, inspection 03/2023 at 36,112 km, inspection + oil change 03/2024 at 48,802 km, inspection 11/2024 at 57,000 km, inspection + oil change 11/2025 at 70,681 km, inspection Mounted tires: Winter tires 215/65 R 16 on steel rims with approx. 8 mm tread depth in the front and approx. 8 mm in the rear Additional tires: Summer tires 205/65 R 16 on steel rims with approx. 7/7/7/7 mm tread depth Despite careful processing, input and data transmission errors may occur in the vehicle description including pictures. Errors and prior sale are subject to change. The vehicle can be inspected by DEKRA or TÜV upon request.

Year of construction: 2017, condition: used, Embossing machine Kolbus PE 312 Age: 2017 Machine is intended for blind embossing, film embossing and hot embossing of firm, flexible and plastic cases. Configuration: - Copilot system with touch screen - Case pre-stacking conveyor (positioning with case overlap) - Case bending station - Case supply with 90 ° pivoting option (format-dependent) - Film feeder with two film pulling rollers - Unwinder - Film withdrawal unit - Motorised embossing head adjustment (max. 70 mm) - Divided embossing table plate - Correction rails for positioning precisely according to the register - Temperature-controlled embossing head heater with timer for pre-heating - Linear deposit belt with delivery table including overlap width setting - Automatic case counter - Servo-controlled drive technology based on Siemens technology - Counter-stacker delivery to the right with roller conveyor delivery Special equipment: - 1 embossing plate for accommodating the embossing tool (adhesive fastening) - 1 embossing plate with grid holes for accommodation (screw connection) - Case set-up outside of the machine for reducing the make-ready time - 3rd film pulling roller controlled by step motor for the 1st film feeder - 2nd film feeder with two film feed rollers controlled by step motors - 3rd film pulling roller controlled by step motor for the 2nd film feeder - Set-up for embossing time extension - Set-up for multiple embossing - Cycled feed for ideal utilisation of the film Technical specifications: - opened case (hardcover) max.: 660 x 405 mm - opened case (hardcover) min.: 155 x 100 mm - opened case (flexible embossing material) max.: 400 x 300 mm - opened case (flexible embossing material) min.: 135 x 100 mm - case pre-stacking conveyor min.: 155 mm Iodpszgc Ibsfx Ahzeaw - pressure surface max.: 460 x 355 mm - pressing force max.: 350 KN - mech. speed: up to 80 embossings/min

Condition: new, maximum load weight: 32,600 kg, overall weight: 40,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, PAVIC OptiPa PRSH 27 platform semi-trailer for transporting timber and long materials. * Chassis length approx. 13510 mm (head frame-head frame) * Chassis width approx. 2540 mm (outer frame-outer frame) * Sturdy steel bulkhead approx. 2,500 mm high * 16x OptiPa A7 one-piece aluminum stanchions * Steel floor 4/6 mm tear plate cover * Technically permissible total weight 43,000 kg * Unloaded ride height approx. 1400 mm with saddle height 1200 mm * Max. fifth wheel load approx. 16000 kg * 2" kingpin in accordance with SAE standard, interchangeable from below * 16x Optipa quick-release fastener system embedded in the outer frame and 8x as storage for stanchions distributed centrally over the entire length * 3x 9t axle with large disc brake and air suspension unit for 9t load capacity each Total lift approx. 180 mm * Lifting and lowering device with rotary slide valve * Axle lift first axle, automatic function, with starting aid * Smartboard/TIM/Infocenter * EBS brake system make Knorr or Wabco of our choice with Roll Stability program * Brand tires 385/65 R 22.5 * LED work lights * LED lighting system * 2x toolbox Iasdpfx Aen Hrrijhzsw * CDP with zinc phosphating plus powder, maximum corrosion protection (only if powder paint is available) For further information please do not hesitate to contact us

Condition: new, maximum load weight: 14,910 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 6,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis frame: * Welded construction made of high-quality steel with cross members and an outer frame. Ramp storage: * Ramp storage between the longitudinal beams. Under-run protection: * Rigid under-run protection in accordance with ECE R58-03 * Side and under-run protection in accordance with EC regulations. Front support: * Front support with two-stage crank supports (2 x 12 t). Rear support: * Rear support with lockable drop supports. Axles: * 2 x 10t SAF axles with drum brakes, low-maintenance air suspension axle, lifting and lowering device with a total lifting stroke of approx. 180 mm, asbestos-free brake pads. Axle with a load capacity of 10,000 kg. * Compressed air tank, steel * Wheel fastening by center centering Tires: * Tires 235/75 R 17.5, on steel disc wheels, 8-ply, manufacturer of our choice * Tire pressure monitoring system, which indicates low tire pressure. Splash guard: * Plastic mudguards, splash flaps Load securing: * 6 pairs of lashing recesses designed for 8 t, evenly distributed on the outer frame * Beveled and perforated outer frame for attaching lashing hooks when the side boards are closed * Stake pockets: 3 pairs of welded stake pockets, internal dimension for stakes approx. 80 x 50 mm, evenly distributed. Braking system: * Automatic, load-dependent, two-circuit pneumatic braking system in accordance with EC regulations with spring-loaded parking brake (incl. 1 release valve), EBS connections for air (red/yellow), corrugated flexible lines for trailer. Floor: * Hardwood floor approx. 30 mm, with Z-profile boards. Front wall: * Designed as a removable side board, approx. 600 mm high. Lighting/electrical system: * Electrical system: 24-volt lighting system in accordance with StVZO * Multi-chamber rear lights, completely LED, with integrated ballast and flashing side marker lights. * On the trailer, additional position lights. * Position lights at the front, white (required for approval in EU countries and Switzerland). Electrical system: * Trailer connections: 2x7-pole * Trailer connection: 1x15-pole * Mounting plate for supply lines on the front cross member, lines permanently mounted, without separate connections, supply connections on the left. Accessories: * Wheel chocks in accordance with StVZO. Iajdpezgqncjfx Ahzjw * Plug-in revolving warning light at the rear. * Delivery of an additional 40 mm towing hitch (GVWR max. 13,500 kg). Painting: * Coating of undercarriage: galvanized + powder-coated * Chassis frame with high-quality hot-dip galvanizing and subsequent powder coating for optimum corrosion protection; the surface may show the ripple structure of the hot-dip galvanizing. * Coating of body parts: standard Color: * RAL 3002 carmine red * Center and corner profiles: KTL + powder coating: RAL 3002 carmine red * Side boards: RAL 3002 carmine red * Drawbar: hot-dip galvanized * We would like to point out that, due to the size of the chassis and the selected coating process (hot-dip galvanizing), surface imperfections may occur. These include, for example, zinc pimples, run-ons, zinc whiskers, distortion, etc. We have no influence on this, and it will not constitute a legal defect with regard to the appearance at a later date. Contour marking: * Yellow lateral reflective contour marking. * Yellow ref

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Iodpfxjvvkipe Ahzeaw

Condition: excellent (used), Here we offer a fastening system. Ijdpfezgabfsx Ahzoaw Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone. Written orders can be placed via email or fax.

Condition: used, mileage: 49,986 km, power: 103 kW (140.04 HP), first registration: 06/2021, fuel type: diesel, overall weight: 3,300 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,413 mm, total width: 2,050 mm, total height: 2,522 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1148. 2S21220 ----EQUIPMENT * Tow hitch (non-removable) * Doors: Rear doors opening 260° * Transmission: 6-speed manual * ABS * Storage compartments in the front doors * Airbag, driver's side * Radio: Audio system (DAB), MP3-compatible, Bluetooth hands-free system - Touchscreen - Roof antenna - USB - Control lever on the steering wheel * Exterior mirrors, electrically adjustable and heated * Turn signals in the exterior mirrors * On-board computer * Brake light, third * Tachometer * ESP with hill start assist and ASR * Parking assist system at the rear with acoustic warning sensors * Power windows, front * Glove compartment - lockable * Manual air conditioning including outside temperature display * Headrests (3), height-adjustable * Paint: Solid color paint * Interior lighting in the cargo area * Steering wheel, adjustable in depth * Emergency brake assist * Particulate filter: Diesel particulate filter * Upholstery: Fabric * Radio: DAB: digital roof antenna * Rub rails, side * Headlight range adjustment, electric * Sliding door: Sliding door, right side * Power steering * Seat belts, height-adjustable - Warning signal "Seat belt not fastened" (driver) * Seats: Double passenger seat - with 3-point automatic seat belts * Seats: Driver's seat, height-adjustable, passive, with lumbar support - Armrest * Stop & Start system * Cruise control system including speed limiter * Partition, closed * Door: Automatic door unlocking in the event of an impact * Doors: Rear hinged doors, sheet metal up to 180° opening Isdpfx Ahjzhhucszsaw * Tie-down points in the cargo area * Immobilizer * Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!