Used Kolbus Ratiobinder Km 470 for sale (10,452)

Condition: good (used), Year of construction: 1998, Krauss Maffei KM 800-8000 MC injection molding machine Year of manufacture: 1998 Serial number: 8D980U9 Control system: Krauss Maffei MC3F Clamping force: 8000 kN (800 t) Screw diameter: 130 mm L/D ratio: 22:1 Injection volume: 6570 cm³ Injection weight (PS): 5617 g Injection pressure: 1296 bar Maximum cylinder temperature: 375°C Distance between columns (H x V): 1120 x 1000 mm Dimensions of mounting plates: 1600 x 1530 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum daylight opening: 2000 mm Ejector stroke: 250 mm Ejector force: 226 / 95 kN (front / rear) Screw speed: 92 rpm Injection rate: 929 cm³/s Pump motor power: 132 kW Heater power: 70 kW Bwodpfx Ahjzrwy Asmeu Number of heating zones: 7 Dry cycle (EUROMAP): 700 cycles/h Oil tank capacity: 3600 l Supply voltage: 400 V / 50 Hz Machine length: approx. 10,500 mm Machine width: approx. 2650 mm Machine height: approx. 2400 mm

Condition: like new (used), mileage: 615,000 km, MERCEDES ANTOS 18-35, 2014, Euro 6, 615,000 km. Box body with side gates, dimensions 9.30 x 2.55 x 2.80 m, with hydraulic lift. Fifth wheel coupling. Automatic transmission. Full pneumatic braking system. Italian vehicle. Financing options available. Bwedpfezc Ra Sex Ahmou BENITO: 3383844139 MICHELE: 3394588233

Condition: ready for operation (used), Year of construction: 2021, operating hours: 9,500 h, clamping force: 1,000 kN, overall weight: 5,290 kg, This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details. - Tie Bar Distance: 470 mm- Mould Height Min.: 180 mm- Mould Height Max.: 550 mm- Centering Diameter (Fixed Platen): 125 mm- Centering Diameter (Moving Platen): 125 mm- Ejector Stroke: 150 mm- Ejector Force: 32 kN- Ejector Speed: 333 mm/s- Injection Unit Size: 250- Screw Diameter: 30 mm- L/D Ratio: 20- Injection Speed: 350 mm/s- Control Unit: SDIAS- Mains Connection / Voltage: 400 V / 50 Hz- Current / Amperage: 70 A- Short Circuit Capacity (Icw): 2.0 kA- Max. Hydraulic Pressure (Pmax): 210 bar- Total Weight: 5290 kg- Robot System Model: SDR 5S H&P- Robot Load Capacity: 3 kg- Robot X-Stroke (Transverse Stroke): 1000 mm (Non-operator side)- Robot Y-Stroke (Demoulding Stroke): 400 mm- Robot Z-Stroke (Vertical Stroke): 1000 mm- Additional / Peripheral Equipment:- Material Hopper Loader / Conveyor: KOCH TECHNIK- Temperature Control Unit: HB-THERM Thermo-5 Bsdpfx Aszp Ew Djhmjwu

Condition: excellent (used), Manufacturer: KRAUSS MAFFEI Type: KM 120-380 EX Control: MC5 Year of manufacture: 2008 Operating hours: 10113 h Technical data, clamping unit Clamping force: 1200 kN Tie bar spacing h x v: 470 x 470 mm Platen size h x v: 780 x 735 mm Minimum mold height: 200 mm Maximum mold height: 450 mm Maximum mold thickness: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centering of moving platen D: 160 mm Centering of fixed platen D: 125 mm Tool weight: 1485 kg Technical data, injection unit Screw diameter: 35 mm Injection volume: 156 cc Injection pressure: 2429 bar Screw length: 23 l/d Bwsdpfx Aozyn Igohmeu Screw speed: 289 rpm Plasticizing rate: 27 g/s PS Injection rate into free air: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 6 m x 1.7 m x 2.19 m Total weight: 9700 kg Equipment • Screen display in German • Screen display in English • CEE socket 16A • Hydraulic core pull, 2x • Machine with water manifold • Machine without material hopper • Leveling elements • EUROMAP 12 interface • Schuko socket 10A

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold thickness: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Screw diameter: 60 mm Injection volume: 769 ccm Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s Bsdpezypawsfx Ahmewu Injection rate into free air: 700 g/s Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 4x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 12x

Condition: used, mileage: 140,000 km, power: 96 kW (130.52 HP), first registration: 01/2020, fuel type: diesel, maximum load weight: 1,000 kg, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,300 mm, loading space width: 2,100 mm, Year of construction: 2020, - Used Truck: Ford Transit 350, Twin-Wheel configuration with Three-Sided Tipper Body - Registration: 01.2020, Engine: 2.0 TDCi 130 hp Euro 6d, 6-speed gearbox, Mileage: 140,000 km. - Gross Vehicle Weight: 35 tons, Payload: 10 tons, Twin rear wheels, Leaf spring reinforcement kit. - Equipment: Cantoni three-sided tipper body, External dimensions: 3,300 x 2,100 mm, Sideboards height: 400 mm, Lifting mechanism with No. 5 hydraulic cylinders, Front pole carrier with net, Rear pole carrier, No. 2 winch with tensioning cable, Rear light protection net, Spare wheel. - Equipped with: Air conditioning, Radio-Bluetooth, USB and Smartphone holder, Start-Stop system, On-board computer, Central locking, Two keys, Driver airbag. - Bodywork and interior in excellent condition, Mechanics with a 12-month dealer warranty. - Unique Vehicle - One Owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy, opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified Mileage. - Road test possible by appointment. - Ownership transfer can be arranged on-site. - Customized financing options available. Carlo Mauri Srl disclaims all responsibility for any unintentional discrepancies in the advertisement, which does not constitute any contractual commitment. The prices quoted are exclusive of VAT and ownership transfer fees. Bjdey Sti Aepfx Ahmjwu

Condition: used, mileage: 10,300 km, power: 96 kW (130.52 HP), first registration: 01/2024, fuel type: diesel, maximum load weight: 900 kg, overall weight: 3,500 kg, axle configuration: 4x2, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,500 mm, loading space width: 2,200 mm, loading space height: 2,200 mm, Year of construction: 2024, - Used truck in like-new condition - 35 quintals (7,700 lbs) maximum payload, twin rear wheels, reinforced leaf springs. - Year: January 2024, 130 HP Td engine, Euro 6d emission standard, 6-speed gearbox, 10,300 km. - TREND trim level: air conditioning, ABS, radio, spare wheel, two keys. - Metallic paint: magnetic grey - Cargo bed with aluminum side rails (external dimensions: 3500 x 2200 x 2200 mm). Dropside and tarpaulin with tensioners and rear doors, spoiler. Vehicle in excellent condition, tires at 95%, well-maintained bodywork, intact interior, single owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM. Saturday: 8:30 AM / 12:30 PM - 2:00 PM / 5:00 PM. - Certified mileage. - Test drive possible by appointment. - Transfer of ownership can be handled on-site. - Customized financing options available. Carlo Mauri Srl disclaims all responsibility for any unintentional inconsistencies in the advertisement, which does not constitute any contractual commitment. The prices shown are exclusive of VAT and transfer of ownership costs. Bedpfx Ajwtgk Aohmswu

Condition: excellent (used), Year of construction: 2008, Min. tool mounting height: 200 mm Max. tool mounting height: 350 mm Max. opening stroke: 380 mm Screw diameter: 22 mm Clamping force: 800 kN Tie bar spacing: 470 x 420 mm Delivery does not include attachments/accessories. Bwedpfszkfd Tex Ahmeu The machine is in very good condition and is powered on.

Condition: good (used), Year of construction: 2005, Length: 2300 mm, unlimited as it is open on the sides. 4 stations for drilling, inserting dowels, and applying adhesive. Equipped with a new adhesive nozzle. Bwjdpfx Aszzrdzohmou

Condition: ready for operation (used), Year of construction: 2003, CNC: GE Fanuc Series 18i-TB No. 02 motorized turrets Bjdpfjzmgh Eox Ahmewu Y-axis on rear turret Sub-spindle TOP loader

Condition: used, mileage: 124,685 km, power: 353 kW (479.95 HP), first registration: 12/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: automatic, emission class: euro5, Equipment: air conditioning, navigation system, parking heater, * Navigation system * Automatic climate control * Auxiliary heater (parking heater) * Refrigerator * Cruise control * Hill start assist * Engine brake * PTO (power take-off) * 8x8 * Unladen weight: 15,420 kg ----Internal vehicle number: 10618----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or need more information, feel free to contact us conveniently via WhatsApp. Bjdpfowlbpwox Ahmswu Whatsapp Whatsapp

Condition: used, mileage: 294,094 km, power: 199 kW (270.56 HP), first registration: 01/2018, tire size: 315/80 R22.5, axle configuration: 4x2, brakes: retarder, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, total length: 11,100 mm, total width: 2,600 mm, total height: 3,550 mm, loading space length: 8,700 mm, loading space width: 2,450 mm, loading space height: 2,150 mm, Year of construction: 2018, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, power assisted steering, retarder, = Additional options and accessories = - Air-suspended seats - Immobilizer - Radio/CD/Audio system - Sun visor = Remarks = Tail lift: Dhollandia , slider lift = More information = Type of fuel: CNG Tyre size: 315/80 R22.5 Front axle: Steering; Suspension: parabolic suspension Rear axle: Double wheels; Suspension: air suspension Empty weight: 11.180 kg Carrying capacity: 7.820 kg GVW: 19.000 kg Bsdpfxezw Hacs Ahmowu Make of bodywork: Lamberet

Condition: used, mileage: 222,824 km, power: 309 kW (420.12 HP), first registration: 05/2019, fuel type: diesel, color: red, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Hello! We are pleased to welcome you. We would like to offer you the following vehicle with the equipment listed below: Please be sure to include your phone number in your message! * Immediately ready for use * Retarder Bwjdpfozkdhdsx Ahmju * Automatic climate control * Navigation system * Dimensions without container height: 3.55m length: 7.08m width: 2.55m * Multifunction steering wheel * New TÜV (technical inspection) * Fixed trailer hitch * Suitable for short-distance transport * Refrigerator * Tires approximately 60% tread remaining * HIAB skiploader body, year of manufacture 2019 * Steerable axle Our services: - New TÜV and emissions test - Nationwide delivery - Test drive possible at any time - Attractive financing options - Vehicle trade-in Opening hours also on Sundays by appointment.

Year of construction: 1999, condition: ready for operation (used), A two-component injection molding machine Krauss Maffei Multinject is available. Clamping force: 3500kN, platen dimensions X/Y: 1280mm/1190mm, second unit: 390CZ. Machine dimensions X/Y/Z: approx. 6300mm/2000mm/3100mm, weight: approx. 17000kg, control: Krauss Maffei MC4, operating hours: 78424h. The control is defective. Documentation vorhanden. An on-site inspection is possible. Bsdpsxx Uf Ajfx Ahmewu

Year of construction: 2018, condition: ready for operation (used), Two identical Göztepe belt fryers are available for vegetables (onions, potatoes, nuts, etc.). Working length: 6800mm, working width: 700mm, inlet height: 1280mm, outlet height: 1060mm, working temperature: 180°C, plastic belt length and width bottom: 14000mm/720mm, plastic belt length and width top: 8500mm/720mm. Machine dimensions X/Y/Z: approx. 6900mm/1800mm/3500mm, total output: 135kW. Documentation available. On-site inspection is possible. Bedpsu Tiy Nefx Ahmewu

Condition: ready for operation (used), Nominal power: 468.2kW, max. temperature: 100°C, capacity: 59l, length: 1870mm, width: 845mm, height: 1460mm, weight: 465kg, was maintained regularly. Bjdpfx Aomt Efnjhmewu

Condition: excellent (used), Rule for Raimann KM 310 Bjdpfxeyaxdaj Ahmewu

Condition: used, mileage: 48,000 km, power: 75 kW (101.97 HP), first registration: 06/2000, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 11/2026, color: beige, gearing type: mechanical, emission class: euro2, number of seats: 6, total length: 5,413 mm, total width: 1,880 mm, total height: 2,090 mm, Year of construction: 2000, Equipment: ABS, all wheel drive, parking heater, 1st owner. Only 48,000 total kilometers driven, with service records. Directly from the heated garage of a German aid organization. Long wheelbase syncro 4x4 with limited-slip differential. 3320 mm wheelbase. Registered as a 9-seater, but actually has 6 seats. Original registration according to the vehicle registration document as a "closed passenger car 96/69/EC III". Last registered as "other motor vehicle, water rescue 96/69/EC I". Ball-type tow hitch with a 2000 kg braked towing capacity or 700 kg unbraked. Maximum permissible total weight = 4500 kg. Unladen weight according to documents: 1854 kg. Permissible total weight: 2800 kg. Overall vehicle dimensions: 5413 mm long / 1880 mm wide / 2090 mm high with a blue rotating beacon (without a special warning signal, it is 1920 mm). 5-cylinder TDI diesel engine with 2461 ccm and 102 hp, running perfectly. 5-speed manual transmission. 155 km/h. ABS. Power steering. Auxiliary heater. Bodpsyu Egwjfx Ahmowu 2nd battery and external power supply. Good winter tires from DOT 2023 (with "snowflake symbol"). Swiveling spare wheel carrier / original VW syncro. Fog lights. Additional rear upper turn signals. Production date of this VW bus at the Hanover plant: 02/17/2000. In spring 2026, the T4 was driven over 700 kilometers on the highway without any problems. It runs smoothly and cleanly at all speeds. No problems whatsoever. The van is ready to drive with a valid MOT until 11/2026. There are signs of wear. The overall condition of this long wheelbase syncro TDI is good. This offer is only valid for commercial enterprises of any kind as well as authorities/emergency services. Sale to private end consumers is unfortunately generally excluded. Subject to prior sale and errors. The purchase price is quoted gross = net. So-called differential taxation according to §25a UStG (German VAT Act). This means that no additional 19% VAT has to be paid on top of this price. At the same time, however, the VAT cannot be separately calculated from the purchase price and therefore cannot be deducted for those entitled to claim input tax deduction.

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Bwjdpoy D Adtjfx Ahmju Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Bwedpfx Ahozvmpnsmju Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Bwsdpfezvmxpjx Ahmou Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 850-8100 MX injection molding machine – with servo drive Year of manufacture: 2013 Control system: MC5 Clamping system: hydraulic-mechanical, two-platen Drive: hydraulic with servo drive Design and control Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions and 4 adjusting units mounted on the moving platen. PV – injection unit adjustment. MC5 PC (Pentium) control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with wear-resistant coating. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 8500 kN / 850 t Opening force: 560 kN Mold mounting plate dimensions (H × V): 1600 × 1600 mm Distance between tie bars (H × V): 1140 × 1140 mm Mold opening stroke: 1600 mm Minimum/maximum mold height: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force, front/rear: 200 / 100 kN Injection unit 8100 Screw diameter: 105 mm Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 4137 g Injection rate: 805 cm³/s Screw speed, standard / optional: 121 / 153 rpm Electro-hydraulic equipment Servo drive for the hydraulic system: YES Rated power of the pump motor: 110 kW Number of dry cycles according to EUROMAP 6: 965 cycles/h Oil tank capacity: 1500 l Bwjdpfx Aezvm A Ishmju Dimensions and weight Machine dimensions (L × W × H): 10.81 × 2.92 × 2.57 m Net weight with control cabinet: 43.5 t

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Bedpfx Ajzvm E Ajhmowu Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Condition: good (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, clearance between the columns: 520 mm, displacement volume: 318 cm³, injection weight: 289 g, Year of manufacture: 2005 Operating hours: 80,228 h Clamping force: 160 tons Distance between tie bars: 520 x 520 mm Screw diameter: 45 mm Injection volume: 318 ccm Injection weight: 289 g for PS Equipment: Krauss Maffei robot, core pull, Euromap, 3 additional injection units Bedpfezkqf Aox Ahmewu

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel Bsdpfezkanysx Ahmewu 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t