Used Kramer Motorized/Hydraulic Folder for sale (36,557)

Condition: good (used), 1 x Kramer Grebe & CFS Bowl Cutter Gedpfx Ahoy Exlcozoud Model: VSM 500 Year: 1992 Volume : 500ltr with vacuum *Videos available on request*

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Gedpfsww I Tmex Ahzsud

Condition: used, Year of construction: 1980, Hydraulic guillotine shears, Kramer type TM III HY 2500 Cutting capacity 2500 mm Cutting thickness 12 mm elketr. backgauge Cutting gap adjustment Gsdpfx Asrfwyrohzoud

Condition: excellent (used), Year of construction: 1985, Cutting length 1030 mm Max. sheet thickness 2 mm Stroke rate approx. 67 / min Rear stop 500 mm Table width 230 mm Working height 905 mm, can be lowered to 755 mm Motor power 3 kW Dimensions, machine L x W x H 1550 x 1300 (without support arms) x 1250 mm Weight 850 kg Accessories / Special features: • Rear, manually adjustable rack and pinion stop with measuring tape, length 500 mm • Safety cable at the front, electrically secured • 1 side stop on the right • 1 support arm • Gear brake motor • The current working height is 905 mm. This can be lowered by 150 mm to 755 mm, as the machine has been raised on its machine feet. • Manual central oil lubrication • Electric foot switch We have resharpened and readjusted both blades. Guodpfx Ahjfpa Ihozed Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Cardboard from 210-800 gsm Corrugate A/B/E Crash lock 300 meter per minute Guedetq E U Sspfx Ahzod Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns unit 2end and 4th creasing Remote control Lenght 12.5 m 12KW

Year of construction: 1988, condition: ready for operation (used), A Krämer & Grebe rotary cutter is available. Bowl volume: 325l, knife speed: 3000rpm, knife peripheral speed: 120m/s, steam pressure: 2-4bar, steam temperature: 120°C-150°C, cooking temperature: 65°C-85°C, cooling temperature: 45°C-50°C, machine dimensions X/Y/Z: approx. 3000mm/2250mm/2050mm, weight: approx. 4300kg. Including accessories such as knives, plastic parts and assembly wrench. The machine is dismantled and the control cabinet and the motor are located in the hall. An on-site inspection is possible. Gujdpfx Ajyypl Ashzed

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm opening width top clamping bar: 90 mm adjustment bending cheek: 90 mm Gedpfx Aod Rbz Tehzsud clamping bar drive: 1,5 kW below cheek drive: 4 kW electrical connection: 380 V kW weight: 2600 kg space needed: 3050 x 800 x 1350 mm

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm clamping bar drive: 1,1 kW Gjdpfxjy Np Aj Ahzjud below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm

Condition: refurbished (used), Krämer + Grebe 200L cutter The machine is completely overhauled by us. All wear parts have been replaced on the machine. Godep Aub Iopfx Ahzeud The electrics on the machine is new! Errors and prior sale reserved. All information is non-binding. The accuracy and correctness of the information contained and prices are not guaranteed. A warranty and / or liability is excluded. Until full payment, the machine remains our property.

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical specifications: - Bending and rolling processes performed manually, - Max. working width: 1020 mm - Max. material thickness (St 40): 1.25 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of the upper die: approx. 85 mm - Max. adjustability of the bending die: 20 mm - Shaft diameter: 55 mm - Upper shaft can be pivoted outwards - Rear shaft can be adjusted parallel and at an angle - Space requirement: approx. W 1500 x H 1400 x D 750 mm Gedpfx Ahef S Tg Tjzjud - Weight: approx. 400 kg

Year of construction: 1987, condition: ready for operation (used), A three-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Gsdpeyttv Rofx Ahzoud

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH hydraulic boom crusher, also known as a hydraulic rock crusher, is designed to deliver superior performance in demanding work environments such as quarries, mining operations, and recycling facilities. With its high impact force, it easily breaks down large-sized rocks and stones, making them suitable for the crushing line. This system allows large materials entering the crusher's bunker, especially in the initial crushing stage, to be reduced in size without direct human intervention. The hydraulic boom system, which can be controlled remotely, offers the operator maximum safety, comfort, and control. Vibration and noise levels are kept to a minimum, protecting both the operator and the equipment's lifespan. Thanks to its high-quality material structure, the CONSTMACH hydraulic boom crusher maintains its durability for many years and stands out with its easy maintenance and integration with different crushing systems. This system is an excellent solution for businesses seeking efficient, economical, and safe crushing. Hydraulic Boom Crusher Technical Specifications Crusher: CHB400 Weight: 350 kg Equipment Diameter: 68 mm Pressure and Flow Rate: 100-150 bar / 50-80 liters Gjdexqgv Depfx Ahzjud Installation Area: 700 m² Boom System Specifications Working Angle: 360° Maximum Reach Area: 9000 mm Material: S355J2 Motor Power: 18.5 kW Control Type: Radio-controlled and manual valve control Filters: OMT 25 microns Hoses: (R2) Bezek Why Choose CONSTMACH Hydraulic Rock Breaker? With years of experience in the industry, CONSTMACH prioritizes quality and safety at every stage of production. Our hydraulic rock breaker systems are designed to offer maximum efficiency and minimum maintenance costs. All parts are manufactured from high-strength steel to withstand heavy-duty conditions. Furthermore, we guarantee the uninterrupted operation of your business with our spare parts and technical service support. If you are looking for a durable, reliable, and high-performance crushing solution, the CONSTMACH hydraulic boom crusher is the right choice for you. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Manual swing bending machine, press brake Year of manufacture approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° - Upper die adjustment via hand crank - Pre-setting rail for the bending die Gusdpsdzqaaofx Ahzod - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg Good condition

Condition: ready for operation (used), Year of construction: 2009, A wood dust extraction and filtration system Krämer for saw lines is available. 1) Wood dust extraction unit Krämer VKA-P 100/650/55, air volume flow: 27000m³/h, pressure increase: 3800Pa, motor power: 55kW, V-belt length: 3550mm. 2) Filtration unit Krämer GFS Shake 160/25/250, filtration capacity: 30000m³/h, filter material: polyester needle felt, material discharge: TFS40/10/1.1. 3) Fan Krämer VFM-R 45/250/3, air volume flow: 3000m³/h, pressure increase: 2500Pa, motor power: 3kW. 4) Fan Krämer VFM-P 42/200/4, air volume flow: 2500m³/h, pressure increase: 3000Pa, motor power: 4kW. 5) Separator tank/filter hopper Krämer. 6/7) 2x axial fans. Including pipes and peripheral equipment. The motor flange on the discharge motor is defective. Documentation available. An on-site inspection is possible. Gusdpfoxl Elgox Ahzod

Condition: used, power: 110 kW (149.56 HP), Year of construction: 2018, operating hours: 4,800 h,

Condition: used, functionality: fully functional, The Kramer dryer with 200 liters capacity is for sale Gujdpfoxhgryox Ahzod

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Useful length: 1060 mm Gedpfsfnabysx Ahzsud Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Condition: like new (used), The Kramer + Grebe SM 200 cutter (also known as a bowl cutter) is an industrial machine mainly used in the meat industry for cutting, mixing, and emulsifying meat and other ingredients. Main function: - It features a bowl with an approximate capacity of 200 litres. Guodpox S Ih Tsfx Ahzod - The blades rotate at high speeds to cut meat, fat, ice, spices, etc. - Cutting while the bowl rotates produces a fine emulsion, resulting in a homogeneous texture in products such as sausages, pâtés, frankfurters, and more.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Gedpfxecmat Us Ahzjud Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: excellent (used), Height 360 cm Guedpfx Ajrt Tt Dshzod Length 240 cm Width 220 cm 2.5 kW motor 4,800 m³h

Condition: good (used), functionality: fully functional, power: 24 kW (32.63 HP), fuel type: diesel, empty load weight: 2,300 kg, Year of construction: 2006, operating hours: 2,702 h, Equipment: all wheel drive, cabin, pallet forks, Yard loader / wheel loader KRAMER 180 (340) Year of manufacture: 2006 According to the hour meter: 2,702 operating hours Gjdpfx Ajylubxohzoud 23.5 kW only 2,300 kg - incl. bucket - incl. forks - hydraulic quick coupler - auxiliary hydraulic circuit up to fork carrier - cab with heating - lighting system - joystick controls - 4-wheel steering - immediately ready for operation! - incl. Luxembourg documents! Sale price: €17,900 net Affordable delivery possible!

Condition: good (used), Year of construction: 1991, Krämer + Grebe WW 200 Meat Grinder Manufacturer: Krämer + Grebe GmbH & Co. KG Model: WW 200 Machine number: 281/141 Year of manufacture: 1991 Plate diameter: 200 mm Gujdpfxsx I Ny Ao Ahzjd Power supply: 380 V, 50 Hz Current: 91 A Dimensions: 1900 × 1800 × 2250 mm Condition: incomplete – knives and plates are missing The Krämer + Grebe WW 200 industrial meat grinder is a robust machine designed for grinding raw meat and product blocks in medium and large food processing plants, particularly in meat or cheese production. The machine is constructed from stainless steel, ensuring a high level of hygiene and easy cleaning. The 200 mm throat diameter enables efficient product loading and preparation for further processing stages.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Krämer + Grebe SC-WW Meat Grinder Manufacturer: Krämer + Grebe Type / Model: SC-WW Machine number: 282/118 Year of manufacture: 1991 Power supply: 380 V, 3 phases, 50 Hz Current draw: 117 / 160 A Gjdsx E Dqqjpfx Ahzjud Cutting plate diameter: 200 mm Overall dimensions: 1750 × 1350 × 2550 mm The Krämer + Grebe SC-WW industrial meat grinder is a robust and durable machine designed for heavy-duty use in meat processing plants. Equipped with a high-performance working chamber and a 200 mm cutting plate, it ensures efficient and uniform mincing of even highly chilled meat. The machine is ideal for large-scale production, delivering stable operation, high repeatability, and safety in technological processes.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, total length: 1,250 mm, total width: 900 mm, total height: 1,150 mm, input voltage: 380 V, power: 10 kW (13.60 HP), Kramer Grebe WW130 1985 year 2 speeds - 10kW and 15kW 380V 50Hz 125 cm x 90 cm x 115 cm Gujdsx Dy Nqopfx Ahzsd Entirely stainless steel, stainless steel screws, includes a set of knives and nets. Machine refurbished in 2025

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Godpfx Ahou Axfcozoud Technical Specifications: Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height