Used Leistritz Rt 400-Cca for sale (26,235)

Condition: new, Rust converter epoxy® 400 ml spray can BRUNOX · Patented rust stopper and primer with epoxy resins · Penetrates approximately 10 times deeper into rust pores than conventional rust converter emulsions · Very good flow, leaves no brush marks · Largely compatible with most commercially available topcoat systems · Can also be applied undiluted with airless or compressed air spray guns · Free of heavy metals and mineral acids · No silicone remover, brake cleaner or similar required Rust removal in 3 steps: 1. Remove loose rust, wipe/blow away rust dust/rust particles with a damp cloth/compressor · 2. Apply 2 coats of BRUNOX® epoxy® or 3-4 coats with an airless sprayer/spray gun · Check for complete drying (FINGERNAIL HARD) – no washing required Laedpfxo Abwyxj Ahash · 3. Sand the dried layer (only to remove gloss) · Apply filler, 1-component filler or apply the final coat directly · Other technical properties: Color: amber Content: 400 ml Packaging: Spray can

Condition: new, Multi-Oil 601, 400 ml spray can, OKS * Low-viscosity multi-oil * Excellent penetrating properties Lasdpfx Aj Abw Aaehash * Outstanding corrosion protection * For loosening and removing rusted parts * Excellent lubricating properties * Moisture-displacing * Cleaning and care of metal surfaces * Protection of electrical contacts Content: 400 ml Temperature range: -30 °C to +60 °C Packaging: Spray can

Condition: new, MoS² High-Performance 400 black, 400 ml cartridge, OKS · For heavily loaded or impact-stressed rolling and plain bearings, spindles, and joints · Forms an MoS² lubricating film for emergency running properties · Reduces wear · Resistant to aging and oxidation · Universally applicable high-pressure grease · NLGI class 2 · Further technical properties, designation: KPF2K-30 · Color: black Lajdpfxe Abw Ame Ahaoh · Packaging: cartridge Packaging: Cartridge Content: 400 ml

Condition: new, Scissor-roller conveyors, 400 mm, number of axles: 64 * Design: with ball-bearing mounted, bright zinc-plated steel rollers * Optionally available with 2-row ball-bearing mounted, blue plastic rollers * Roller diameter: 48 mm Lsdpfx As Abu Ruohasah * Axle diameter: 8 mm * All steel parts are zinc-plated * Each support leg has 2 lockable swivel casters with solid rubber tires * Conveyor width: 300 mm, 400 mm, 500 mm, or 600 mm, whereby the conveyed material can also be wider and protrude laterally * Roller spacing: continuously adjustable from approximately 32 mm to approximately 130 mm, depending on the extended length * Height adjustment range: standard from approximately 700 mm to 1100 mm * Delivery of intermediate lengths, special widths, and special heights is possible. Conveyor width: 400 mm Number of support legs: 5 Load capacity between 2 supports: 100 kg Number of axles: 64 Axle diameter: 8 mm Number of rollers per axle: 4 Extendable up to a maximum of: 2.2-7.9 m

Condition: new, Roller conveyor, 400 mm, number of axles: 36 * Design: with ball-bearing supported rollers made of blue plastic tubing, Ø 50 x 2.8 mm * Optionally with ball-bearing supported rollers made of galvanized steel tubing, Ø 50 x 1.5 mm * With spacer tube, Ø 10 mm * Axle diameter: 8 mm * All steel parts are galvanized Lajdpfx As Abu H Aehaeh * Each support foot has 2 lockable swivel casters with solid rubber tires * Conveyor width: 300 mm, 400 mm, 500 mm or 600 mm, whereby the conveyed material can also be wider and protrude laterally * Roller spacing: steplessly adjustable from approx. 55 mm to approx. 130 mm, depending on the extended length * Height adjustment range: as standard from approx. 700 mm to 1100 mm. * Delivery of intermediate lengths, special widths and special heights is possible Axle diameter: 8 mm Extendable up to max.: 1.9-4.4 m Number of axles: 36 Number of rollers per axle: 2 Conveyor width: 400 mm Number of support feet: 3 Load capacity between 2 supports: 100 kg

Condition: new, Description The oscillating circular saw BWS 400-2 from Atika enables effective and effortless sawing thanks to its powerful motor and the large-sized carbide-tipped saw blade. It complies with the latest European safety standards and is equipped with a protective flap and an integrated oscillating lock. The oscillating arm with retaining teeth prevents the twisting of logs, while the height-adjustable operating handle (adjustable in 11 steps from 850 to 1220 mm) enables ergonomic and energy-saving work. An adjustable length stop ensures uniform lengths of wood pieces, and a support extension accommodates long logs. An integrated thermal protector automatically switches off the motor in case of overload, and the standard zero-voltage release function guarantees a high level of safety in the event of power outages. Due to its compact design, the oscillating circular saw can be stored in a space-saving manner. Features - Effective and effortless sawing thanks to the powerful motor and the large-sized carbide-tipped saw blade. - Complies with the latest European standards: increased safety during cutting through the protective flap and the integrated oscillating lock. - The oscillating arm, including the retaining teeth, prevents twisting of the log. - Ergonomic and energy-saving work thanks to the height-adjustable operating handle (working height adjustable in 11 steps from 850 to 1220 mm). - Convenient and easy sawing: includes an adjustable length stop for uniform lengths of wood pieces and an adjustable support extension for long logs. - The integrated thermal protector automatically switches off the motor in case of overload. - Standard equipment includes a zero-voltage release (restart protection in the event of a power outage). - Due to its very compact design, the firewood oscillating circular saw can be stored in a space-saving manner. Power P1 (S6 - 40%): 2.2 kW Cutting width: 3.2 mm Saw blade thickness: 2.2 mm Blade bore Ø: 30 mm Dimensions (Length x Width x Height): 1002 x 737 x 1046 mm Wood length approx.: min. 200 mm - max. 1000 mm Protection type: IP 54 Guaranteed sound power level LWA: 115 dB (A) Sound pressure level LPA: 96 dB (A) Measurement uncertainty factor K: 4.0 dB (A) Cutting capacity approx.: min. Ø 30 mm - max. Ø 140 mm No-load speed n0 approx.: 2800 rpm Lodpfxs Abrpns Ahaoah AC motor: 230 V ~ 50 Hz Mains fuse: 16 A slow-blow Working height adjustable approx.: 850 - 1220 mm Carbide-tipped saw blade Ø (32 teeth): 405 mm

Condition: new, Equipment Laedpfx Ae Abtanohash - Robust, professional-grade unit - Conveyor belt made of PVC plastic - Transverse supports of the belt, H=60 mm - Special design for wood chips, etc.: Lateral, internally located aprons prevent the conveyed material from getting under the belt - Belt length 8000 mm - Belt width 400 mm - Chassis with pneumatic tires, Ø360 mm - Electric motor mounted at the top of the conveyor belt for better power transmission - Height adjustable via hand winch for flexibility - Min. conveying height with 8 m belt length: 3 m - Max. conveying height with 8 m belt length: 4.2 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without extra charge: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (standard) 1:20 = 26 m/min 1:15 = 35 m/min Belt: 8000x400 mm Max. discharge height: 4000 mm Intake width: 300 mm Min. discharge height: 3200 mm Gear ratio: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Drive: Electric motor 400V/0.75kW Dimensions (LxWxH): 8000x900x700 mm

Condition: new, Features - Robust professional-grade unit - Fall protection net - PVC conveyor belt - Belt length: 4 m - Belt width: 40 cm - Chassis with pneumatic tires, Ø360 mm - Height adjustable via hand winch - Minimum conveying height with 4 m belt length: 2 m - Maximum conveying height with 4 m belt length: 2.94 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios at no extra cost: Lede Abrzkopfx Ahaeah 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (Standard) 1:20 = 26 m/min 1:15 = 35 m/min Translation: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Belt: 4000x400mm Min. discharge height: 2000mm Max. discharge height: 3000mm Drive: Electric motor 400V/0.75kW Dimensions (LxWxH): 4000x900x700mm

Condition: new, Equipment - Robust, professional-grade unit - Special design for hazelnuts and pellets, with closely spaced crossbars - Conveyor belt made of PVC plastic - Belt length: 5 m - Belt width: 40 cm - Chassis with pneumatic tires, Ø360 mm - Height adjustable via hand winch - Minimum conveying height with 5 m belt length: 2 m - Maximum conveying height with 5 m belt length: 3.3 m CUSTOM DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Minimum discharge height: 2400 mm Ledpfs Abr A Ijx Ahaeah Dimensions (L x W x H): 5000 x 900 x 700 mm Cleat width: 345 mm Belt: 5000 x 400 mm Maximum discharge height: 3330 mm Drive: Tractor hydraulics

Condition: new, Features - Robust, professional-grade unit - Conveyor belt made of PVC plastic - Crossbars of the belt, H=60 mm - Special design for wood chips, etc.: Lateral, internal aprons prevent the conveyed material from getting under the belt - Belt length 5000 mm - Belt width 400 mm - Chassis with pneumatic tires, Ø360 mm - Height adjustable via hand winch - Electric motor at the top of the conveyor belt for improved power transmission - Minimum conveying height with a 5m belt length: 2 m - Maximum conveying height with a 5m belt length: 3.3 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios (without additional charge): 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (standard) 1:20 = 26 m/min Laedo Abr Drjpfx Ahash 1:15 = 35 m/min Dimensions (L x W x H): 5000 x 900 x 700 mm Belt: 5000 x 400 mm Drive: Electric motor 400V/0.75kW Gear ratio: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Min. discharge height: 2400 mm Intake width: 300 mm Max. discharge height: 3300 mm

Condition: new, Maintenance oil 641, 400 ml spray can, OKS · Displaces moisture · Excellent cleaning effect · Temporary protection against corrosion Lajdpfx Ahs Abw Shoash · Temperature range: -30 °C to +60 °C · For disassembly, lubrication, and maintenance of machine components and metal surfaces · For industrial and workshop use Content: 400 ml Packaging: Spray can Temperature: -50 to +80 °C

Condition: new, Chain protector 341, 400 ml, greenish spray can, OKS · Extremely good creep properties Lajdpfx Ao Abw I Nehash · Strong adhesion and resistant to being flung off · Very good wear protection · O-ring neutral · Solvent-free · For high-speed chains · Synthetic lubricant for machine components exposed to high pressures or corrosive environments · Other technical properties: Container: spray can Container: spray can Content: 400 ml

Condition: new, Equipment - Robust, professional-grade machine - Special design for hazelnuts and pellets, with closely spaced crossbars - Conveyor belt made of PVC plastic - Belt length 8 m - Belt width 40 cm - Chassis with pneumatic tires, Ø360 mm - Height adjustable flexibly using a hand winch - Minimum conveying height with an 8 m belt length: 3 m - Maximum conveying height with an 8 m belt length: 4.2 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Minimum discharge height: 3200 mm Belt: 8000 x 400 mm Lajdpfe Abr Uqjx Ahajh Dimensions (L x W x H): 8000 x 900 x 700 mm Cleat width: 345 mm Drive: Tractor hydraulics Maximum discharge height: 4000 mm

Condition: new, Description The BTK 400 construction circular saw from Atika impresses with its enhanced corrosion protection thanks to full galvanization and a robust steel table top with an aluminum table insert. Equipped with a powerful electric braking motor and a carbide-tipped saw blade with a diameter of 400 mm, it is suitable for precise cuts. The crosscut and miter fence, as well as the bevel cutting guide, ensure accurate adjustments. A foldable longitudinal fence with quick-release clamping and the dust extraction device provide comfortable working conditions. The high stability completes the overall package. Features - Enhanced corrosion protection through full galvanization - Table top made of steel with aluminum table insert - With carbide-tipped saw blade with a diameter of 400 mm - Powerful electric braking motor Lajdpo Abrudefx Ahajh - Crosscut and miter fence, as well as bevel cutting guide - Foldable longitudinal fence with quick-release clamping - Dust extraction device - High stability Table top: 1050 x 750 mm Carbide-tipped saw blade Ø: 400 mm Fuse rating (slow-blow): 16 A Power input P1 (S6 - 40%): 3.0 kW Table extension: 720 x 400 mm Cutting height approx.: 126 mm Sound power level LWA: 106 dB (A) Speed approx.: 2800 rpm Crane eyelets: yes Table height: 850 mm Lockable switch with zero-voltage release: yes AC motor: 230 V ~ 50 Hz Output power P2 (S6 - 40%): 2.2 kW Safety guard: yes Sound pressure level at the workplace LPA: 93 dB (A) Blade bore Ø: 30 mm Rated current: 13.1 A Safety riving knife: yes

Condition: new, Features * Robust construction with full galvanization. * Powerful electric motor with brake. * Steel table top with aluminum table insert. * Lockable switch with zero-voltage release. * Large, foldable table extension. Technical Data AC motor 230 V ~ 50 Hz Input power P1 3000 W Output power P2 2200 W Rated speed 2790 min-1 Fuse rating (slow-blow) 16 A Carbide-tipped saw blade Ø 400 x 2.8 / 3.8 mm Cutting height approx. 126 mm Lsdpfo Abrukex Ahaeah Blade bore Ø 30 mm Number of teeth 28 Longitudinal and cross stop 0° - 45° Lockable switch with zero-voltage release Yes Safety spreader Yes Safety guard Yes Crane eyes Yes Table top 1050 x 750 mm Table extension 720 x 750 mm Table height 850 mm Sound pressure level at the workplace LPA 98.5 dB (A) Guaranteed sound power level LWA 114 dB (A) Measurement uncertainty factor K 4.0 dB (A) Weight approx. 110 kg

Condition: new, Equipment Lsdpfx Ao Abry Hehasah - Robust, professional-grade unit - Fall protection net - PVC conveyor belt - Belt length: 4 m - Belt width: 40 cm - Chassis with pneumatic tires, Ø360 mm - Height adjustable via hand winch - Minimum conveying height with 4 m belt length: 2 m - Maximum conveying height with 4 m belt length: 2.94 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without additional charge: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (standard) 1:20 = 26 m/min 1:15 = 35 m/min Dimensions (L x W x H): 4000 x 900 x 700 mm Drive: Electric motor 220V/0.75kW Max. discharge height: 3000 mm Gear ratio: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Belt: 4000 x 400 mm Min. discharge height: 2000 mm

Condition: new, Equipment - Robust, professional-grade unit - Conveyor belt made of PVC - Special design for wood chips, etc.: Lateral, internal aprons prevent the conveyed material from getting under the belt - Transverse struts of the belt, H = 60 mm - Belt length 7000 mm - Belt width 400 mm Lasdpfs Abr N Ijx Ahaoh - Chassis with pneumatic tires, Ø360 mm - Height adjustable via hand winch - Min. conveying height with 6 m belt length: 2.9 m - Max. conveying height with 6 m belt length: 3.8 m SPECIAL DESIGNS ARE POSSIBLE ON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Dimensions (L x W x H): 7000 x 900 x 700 mm Min. discharge height: 3000 mm Max. discharge height: 3900 mm Belt: 7000 x 400 mm Drive: Tractor hydraulics Feed width: 300 mm

Condition: new, Description The BTH 400 table saw from Atika impresses with its high operating quality and durability. It features enhanced corrosion protection thanks to full galvanization and a robust steel table with a durable aluminum table insert. Equipped with a powerful carbide saw blade with a diameter of 400 mm, it guarantees precise cuts. In addition, it offers a crosscut and miter fence as well as a rip guide for versatile applications. The folding longitudinal fence with quick-release clamping ensures flexible handling, while the dust extraction device guarantees a clean working environment. Thanks to its high stability, the BTH 400 is ideal for demanding use in workshops. Features - Enhanced corrosion protection through full galvanization - Steel table with aluminum table insert - With a 400 mm diameter carbide saw blade - Powerful electric brake motor - Crosscut and miter fence as well as rip guide - Folding longitudinal fence with quick-release clamping - Dust extraction device - High stability Blade bore Ø: 30 mm Fuse rating (slow-blow): 16 A Laedpfxo Abrvus Ahash Rated current: 13.1 A Safety guard: yes Carbide saw blade Ø: 400 mm Safety riving knife: yes Speed approx.: 2800 rpm Sound power level LWA: 105 dB (A) Cutting height approx.: 0 - 126 mm Sound pressure level at the workplace LPA: 92 dB (A) Table extension: 720 x 400 mm Lifting eyes: yes AC motor: 230 V ~ 50 Hz Table: 1050 x 750 mm Lockable switch with zero-voltage release: yes Power input P1 (S6 - 40%): 3.3 kW Power output P2 (S6 - 40%): 2.2 kW Table height: 850 mm

Condition: new, Description The BTH 400 construction circular saw from Atika impresses with its robust design and high performance. Thanks to enhanced corrosion protection through full galvanization and a stable steel table with an aluminum table insert, it is optimally equipped for professional use. The powerful electric braking motor ensures safety and efficiency. In addition, the BTH 400 offers a crosscut and miter fence as well as a guide for making angled cuts for precise cuts. The foldable rip fence with quick-release mechanism ensures ease of use, while the dust extraction device provides a clean working environment. The high stability completes the range of features of this powerful saw. Features - Enhanced corrosion protection through full galvanization - Table made of steel with aluminum table insert - With carbide-tipped saw blade with a diameter of 400 mm - Powerful electric braking motor Ljdpfxs Abrvze Ahaeah - Crosscut and miter fence as well as guide for angled cuts - Foldable rip fence with quick-release mechanism - Dust extraction device - High stability Output power P2 (S6 - 40%): 3.5 kW Safety guard: yes Carbide-tipped saw blade Ø: 400 mm Fuse rating (slow-blow): 16 A Cutting height approx.: 0 - 126 mm Lifting eyes: yes Input power P1 (S6 - 40%): 4.4 kW Three-phase motor: 400 V3~ 50 Hz Rated current: 7.7 A Lockable switch with zero-voltage release: yes Table extension: 720 x 400 mm Table height: 850 mm Sound power level LWA: 105 dB (A) Blade bore Ø: 30 mm Speed approx.: 2800 min-1 Safety riving knife: yes Sound pressure level at the workplace LPA: 92 dB (A) Table: 1050 x 750 mm

Condition: new, Robust professional mixer with a 400 V three-phase motor – the ATIKA Expert 185 is designed for demanding and regular mixing tasks on construction sites. The 750 W three-phase motor reliably drives the large-volume 185-liter mixing drum. With a nominal filling volume of approximately 135 liters, the Expert 185 offers sufficient capacity for larger mixing quantities. The large handwheel with disc brake and foot control allows for safe and comfortable tilting of the drum. The reinforced, torsion-resistant frame, the stable drum bearing, and solid rubber tires ensure high stability and durability. Highlights at a glance: 185 l drum capacity Approx. 135 l nominal filling volume 750 W three-phase motor 400 V mains connection Handwheel with disc brake and foot control Specially designed mixing paddle for optimal mixing quality Reinforced, torsion-resistant frame Solid rubber tires Ø 400 mm Laodpe Abtg Isfx Ahash Thermal motor protection Restart protection in case of power failure Note: The mixers are stored in an open-air storage area until shipment. Slight contamination or weather residues do not constitute a defect or grounds for complaint. Drum filling capacity approx.: 185 liters Restart protection: yes Protected against electrical shock: yes Protection class: IP45 Power P1: 750 watts Solid rubber tires Ø: 185 liters Dimensions (L x W x H): 1360 x 912 x 1355 mm GS safety mark: yes Three-phase motor: 400 V3~ 50 Hz

Condition: new, Equipment - Robust, professional-grade unit - Conveyor belt made of PVC plastic - Belt length: 5 m - Belt width: 40 cm - Chassis with pneumatic tires, Ø360 mm - Adjustable height via hand winch - Minimum conveying height with 5 m belt length: 2 m Laodpfj Ab H Dyox Ahajh - Maximum conveying height with 5 m belt length: 3.30 m SPECIAL DESIGNS ARE POSSIBLE UPON REQUEST, WITH INDIVIDUALLY ADJUSTABLE BELT LENGTHS AND SPEEDS! Possible gear ratios without extra charge: 1:50 = 10 m/min 1:40 = 13 m/min 1:30 = 17 m/min 1:25 = 21 m/min (standard) 1:20 = 26 m/min 1:15 = 35 m/min Dimensions (L x W x H): 2800 x 700 x 650 mm Drive: Electric motor 400V / 0.75 kW Gear ratio: 1:25 = approx. 21 m/min belt speed (standard gear ratio) Belt: Double-telescoping Belt dimensions: 5000 x 400 mm

Condition: new, - for fine planing cuts on various types of wood Ledpfx Aho Ab Nkveaoah Bore: 30 mm Diameter: 400 mm Cut: 3.5/2.5 mm Teeth: 60

Condition: new, Brochure stand, D. 540 mm, H 1710 x W 300 x D 400 mm, STA, aluminum silver, rotatable, without compartments · (without brochure compartments) Ledo Acf H Aspfx Ahaeah · Sturdy steel construction, aluminum silver · Equipped with DIN A4 brochure holders or, in combination with a compartment divider (accessory), for 2 DIN long brochures Height: 1710 mm Color: aluminum silver Material: steel Design: rotatable Depth: 400 mm Number of compartments: none Suitable for: up to 12 brochure compartments Diameter: 540 mm Equipment: with DIN A4 brochure holders Width: 300 mm

Condition: new, Description The RTS-630 wood chipper is equipped with a Lifan gasoline engine, which delivers an output of 15 hp and is designed to effectively shred branches, logs with a diameter of up to 10 cm, and other wood waste. The thickness of the wood chips can be adjusted by changing the position of the 4 knives on the 620 mm diameter cutting disc, which also generates additional momentum. The RTS-630 is mounted on a rugged chassis with a drawbar, which increases its mobility and flexibility in use. For safe operation, the chipper is equipped with a safety switch and safety guards. The discharge chute can be rotated 360° to direct the shredded material in the desired direction, making handling easier. The RTS-630 model enables efficient and comfortable operation. The recovered material can be used in a variety of ways, e.g. as firewood for use with an auger conveyor or for composting. The bearings can be lubricated via grease nipples, which ensures efficient lubrication and extends the life of the machine. Technical data Max. cutting diameter (fresh softwood) 100 mm Max. cutting diameter (fresh hardwood) 80 mm Max. cutting diameter (dry hardwood) 60 mm Cutting knife material Wear-resistant steel with increased hardness Infeed hopper 48/48 cm Mounting system Unit on 25 km/h off-road chassis with support wheel and ball-head coupling Engine LIFAN 15 hp OHV four-stroke engine Cutting disc diameter 620 mm Number of knives 4 + 1 counter knife Discharge angle on the discharge chute Lsdpfx Ao Ab Tmbjhaoah 360° Height of the discharge chute 180 cm Weight 300 kg

Condition: new, Description The REMET RT-720RH disc chipper for tractors has its own engine, which is powered by the power take-off (PTO). This engine drives the infeed rollers, which can draw in branches and other pieces of wood up to 17 cm in diameter. The thickness of the shredded wood can be adjusted by changing the speed of the infeed rollers. The blades are attached to a large disc with a diameter of 720 mm, which gains additional power from its weight of 85 kg. An emergency stop switch is provided for the operator's safety. It is also possible to retrieve material that has been drawn into the hopper. The discharge chute can be rotated 360° in all directions, which makes it easier to collect the shredded wood. This machine operates very efficiently. The wood chips can be used either as fuel or for composting. The chipper is powered by the tractor's PTO. It is recommended to use a PTO with a shear bolt. The shear bolt protects the machine from damage if the material blocks it. Lubrication nipples are provided to lubricate the machine's bearings. Technical data Min./Recommended power 55/80 kW Max. cutting diameter (fresh softwood) 170 mm Max. cutting diameter (fresh hardwood) 150 mm Max. cutting diameter (dry hardwood) 120 mm Laodpfx As Ab Sg Tohaeh Recommended PTO speed 540-1000 rpm Mounting system Three-point linkage Cutting disc Ø 720 mm Number of blades 4 + 1 counter blade Discharge angle from the discharge chute 360° Height of the discharge chute 210 cm Weight 450 kg