Used Lider Cement Tanker White for sale (3,784)

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Guedpfx Aezii Awoqgoh Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Nikon Type: VMZ-R3020 XYZ measuring ranges: 300 x 200 x 200 mm *TZ type with objective with low magnification: 250 x 200 x 200 mm Display resolution: 0.01 μm Maximum permissible deviation (MPE) EUX, MPE EUY, MPE 1.2 + 4L / 1000 µm EUXY, MPE 2.0 + 4L / 1000 µm EUZ, MPE 1.2 + 5L / 1000 µm Maximum sample weight 20 kg (Guaranteed accuracy: 5 kg) Camera Black and white / color 1/3 CMOS camera Working distance Type 1, 2, and 3: 50 mm Type 4: 30 mm Type TZ: (High magnification) 11 mm / (Low magnification) 32 mm Type A: 73.5 mm (63 mm with laser AF) Laser AF repeatability range 1), 3) 2σ ≦ 0.5 µm Illumination Type 1, 2, 3, and 4: Incident light, transmitted light, and 8-segment ring light with 3 angles of incidence *white LED / Type 4 has only 1 angle Type TZ: Left objective: Episcopic, dark field; Right objective lens: Incident light, transmitted light, dark field Type A: Incident light, transmitted light, and 8-segment ring light with 1 angle of incidence *white LED Power supply, power consumption AC100 V-240 V, 50/60 Hz / 4 A – 2 A Gsdeyiy Hbopfx Aqgeuh Dimensions & weight Main body with table (W x D x H): 700 x 730 x 1793 mm / approx. 265 kg Controller: 190 x 450 x 450 mm / approx. 12 kg Footprint (W x D): 2700 x 2400 mm Condition: used Scope of delivery: (See picture) (Changes and errors in technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, total length: 4,750 mm, total width: 2,640 mm, total height: 2,030 mm, Colour: White Empty weight: 3.500 kg The Bauerrichter ESR-1 is a polisher designed for creating high-gloss surfaces on various materials. Below is a summary of its technical specifications: Technical Specifications: CharacteristicSpecificationElectric connection380 V, 20 kDimensions (L x W x H)5,600 mm x 2,400 mm x 2,100 mmWeightAbout 3,000 kgWork table dimensions1,350 mm x 3,200 mmMaximum workpiece height< 100 mmDiameter polishing rollerØ 400 mmFeed rateFrequency controlled Characteristics: Polishing unit:Moves over a fixed work table and is equipped with an inclined, oscillating polishing roller. The height and oscillation speed are infinitely adjustable. Polishing roller: Equipped with special 400 mm diameter polishing rings that ensure longer life and lower operating costs. Quick-change system: Allows easy and quick replacement of polishing rings, reducing set-up time. Workpiece attachment: Standard equipped with a quick clamping system; optional vacuum clamping system is available for faster and more comfortable operation. Godpfx Aswnhxdoqgjuh Construction: Robust welded precision work table with phenolic resin bonded film plates, resistant to heat, moisture and chemicals. Drive: High quality SEW electric motors with energy efficiency class EFF1 (IE2), known for their robustness and durability. This machine offers an efficient solution for polishing various materials and is designed with durability and ease of use in mind. - CE marking present: Yes - Serial number: 150610 - Number of units [pcs]: 2 - └ Unit 1: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 1 - - Brush length [mm]: 1500 - - Brush diameter [mm]: 180 - - Motor power [kW]: 11 - └ Unit 2: - - Position: Top - - Type of unit: Brush unit - - Number of brushes [pcs]: 7 - - Brush length [mm]: 75 - - Brush diameter [mm]: 180 - Max. working width [mm]: 1440 - Max. passage height [mm]: 250 - Infeed table length [mm]: 5150 - Outfeed table length [mm]: 5150 - Voltage [V]: 400 - Transport dimensions: 4750mm x 2640mm x 2030mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, Year of manufacture: 2008 Colour: White Empty weight: 750 kg Price: On request - Year: 2008 - CE marking present: Yes - Serial number: 108/1008-3 - Main motor power [kW]: 4.0 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) - Transport weight [kg]: 750kg Gsdpfx Aqjych Elsgeuh - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), mileage: 56,740 km, power: 110 kW (149.56 HP), first registration: 10/2024, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,300 mm, total width: 1,900 mm, total height: 1,990 mm, loading space length: 2,970 mm, loading space width: 1,690 mm, loading space height: 1,410 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Manual - Radio/cassette - Rear view camera - Partition = Notes = Configuration: 4x2, Payload: 971 kg, Unladen weight: 1829 kg, Gross vehicle weight: 2800 kg, Towing capacity, unbraked: 750 kg, Towing capacity, middle axle, braked: 2500 kg, Type of cabin: Single cab, Air conditioning, Number of airbags: 2, Rear window wiper, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, Color: White, Heated mirrors, Rear view camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 110 kW (148 Hp), Number of cylinders: 4, Displacement: 1968 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Side panels, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat configuration: 1+2, Seat upholstery: Leather, Seat adjustment: Manual, L2H1 150 hp Automatic T6.1 Rear doors Carplay 3-seater Camera BPM-free!, Tire type: All-season tires = Further Information = General Information Gsdpfxozz H Sgo Aqgsuh Number of doors: 1 License plate: V-40-RJN Axle Configuration Tire size: 215/65R16 Brakes: Disc brakes Suspension: Coil suspension Weights Unladen weight: 1,829 kg Payload: 971 kg GVW: 2,800 kg Functional Loading area height: 57 cm Interior Upholstery: Leather Maintenance APK (Technical Inspection): valid until 10/2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €480 per month (delivery van, 72 months); Please inquire for further information and conditions.

Condition: used, mileage: 1,001 km, first registration: 01/1989, fuel type: diesel, color: yellow, driver cabin: other, gearing type: other, loading space volume: 18 m³, Year of construction: 1989, Vehicle location: Bovenden, Gujdpfevhg Nvox Aqgjh Superstructure: Welgro tank approx. 18 cbm. Total length with subframe: 5.30 m Compressor system Holmes Blower RBTM 68, silo has 4 dome covers and 3 chambers approx. 4.5 cbm, 9.0 cbm, 4.5 cbm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 1 km, first registration: 01/1998, color: green, driver cabin: other, gearing type: other, loading space volume: 6 m³, Year of construction: 1998, Vehicle location: Bovenden, catwalk Superstructure: 1 chamber with 6000l capacity Volume meter with integrated gas measuring device for low-viscosity mineral oil products, Sening company, type GMVT 403/703, hose length 40m, pump manufacturer, Sening company, type SA (capacity approx. 700l/min)! Demonatge from Daimler-Benz LK 1317 AK 4x4, wheelbase: 3650mm ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Guedpovhhrfjfx Aqgoh - .

Condition: used, empty load weight: 3,800 kg, maximum load weight: 14,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/1999, loading space volume: 31 m³, suspension: air, tire size: 385/65R22.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, turntable, air-suspended, ABS (anti-lock braking system), U-protection, aluminum side bumpers Body: 2-axle silo trailer for dust and trickle goods with 4x dome cover approx. 31m³ Pressure tank test was renewed in June 2022! Next external inspection in 03/2024! Guedjvhkitjpfx Aqgsh Next internal inspection in 03/2026! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to changes, prior sale and errors excepted! - .

Condition: used, mileage: 1,094,480 km, power: 300 kW (407.89 HP), first registration: 10/2009, fuel type: diesel, empty load weight: 8,690 kg, maximum load weight: 9,310 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, loading space volume: 14 m³, Equipment: ABS, air conditioning, cabin, central locking, cruise control, low noise, traction control, trailer coupling, Vehicle location: Bovenden, mtl. house, 1x comfort seat, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), automatic, storage box, ADR equipment, leaf-air suspension, air+light trailer hitch, low-noise G1, U-protection, roof hatch, radio remote control, green environmental badge Wheelbase: 3900 mm Body: Esterer tank body with 3 compartments approx. 14.000l (6080l/2520l/5510l), radio control disc brakes on VA and HA, Duo-Matic coupling heads and EC brake connection, ADR type class AT, CD radio pre-equipment telephone, fax, pre-equipment CB radio, storage box, fixed on engine tunnel, distributor cockpit, Mercedes PowerShift G 211-12/14.93-1.0, air suspension rear axle, main tank 300 l, aluminum, power take-off MB 124-10b, flange, N-speed, comfort trailer coupling G 150, driver comfort suspension seat, Grammer, Actros 3. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Godpfx Aovhlb Rjqgouh - .

Condition: used, mileage: 432,230 km, power: 287 kW (390.21 HP), first registration: 07/2006, fuel type: diesel, empty load weight: 10,060 kg, maximum load weight: 15,940 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, mtl. house, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, AS-Tronic automatic, differential lock, fog lights, storage box, leaf-,air, last axle liftable and steerable, low-noise G1, U-protection, roof hatch, environmental badge green Wheelbase: 3900 mm Body: Willig tank body for heating oil & diesel with 3 chambers approx. 20,000l (8200l/4500l/7300l) Transmission ZF 12 AS 2301, M cab. Next leak and function test 10/2025! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Godpfxevhmu Ee Aqgjuh - .

Year of construction: 2023, condition: new, U šroubovaných, svařovaných a vodorovných typů se sila používají při skladování cementu, popílku, bentonitu a jiných sypkých materiálů. Svařovaná sila Při nízkých skladovacích kapacitách jsou preferována svařovaná sila, lze je smontovat a uvést do provozu za 2 hodiny jediným jeřábem. Je upřednostňována v místních řešeních, kde mohou být náklady na dopravu ignorovány. Semix může vyrábět svařovaná sila v rozmezí 50 až 150 tun. Šroubovaná sila Šroubovaná sila jsou preferována pro přepravu kvůli své kompaktnosti. Mohou být přepravována v kontejnerech, aby se zabránilo nákladům na dopravu. Díky své modularitě může Semix vyrábět svařovaná sila v rozmezí od 100 do 2 000 tun. Semix poskytuje mechanickou kontrolu správného sestavení šroubovaného sila. Semixu dokázal nainstalovat šroubovaná sila v Peru, Izraeli, Německu a Velké Británii. Gusdogau Umspfx Aqgoh

Year of construction: 2023, condition: new, With bolted,welded and horizontal types, silos are used in storing cement,fly ash,bentonite and other bulk materials. Gujdjgau Uqopfx Aqgoh Welded Silos Welded silos are preferred in low capacities of storage, it can be assembled and operated in 2 hours with one crane. It is preferred in local solutions where transportation costs can be neglected. Semix is able to manufacture welded silos in a range between 50 to 150 tons. Bolted Silos Bolted silos are preferred due to its' compactness for transportation. It can be transported with containers for avoiding freight costs. Because of its modularity, Semix is able to manufacture welded silos in a range between 100 to 2000 tons. Semix provides a mechanical supervisor for assembling the bolted silo correctly. Semix have succeed to install bolted silos in Peru, Israel, Germany and United Kingdom.

Year of construction: 2023, condition: new, With bolted,welded and horizontal types, silos are used in storing cement,fly ash,bentonite and other bulk materials. Welded Silos Welded silos are preferred in low capacities of storage, it can be assembled and operated in 2 hours with one crane. It is preferred in local solutions where transportation costs can be neglected. Semix is able to manufacture welded silos in a range between 50 to 150 tons. Gedpfjgava Dsx Aqgsuh Bolted Silos Bolted silos are preferred due to its' compactness for transportation. It can be transported with containers for avoiding freight costs. Because of its modularity, Semix is able to manufacture welded silos in a range between 100 to 2000 tons. Semix provides a mechanical supervisor for assembling the bolted silo correctly. Semix have succeed to install bolted silos in Peru, Israel, Germany and United Kingdom.

Condition: excellent (used), Sorting, feeding, and positioning machine Sealing and screwing station without a filling station Fully automatic filling and sealing system with a feeding unit and filling needle Guedjqazcgspfx Aqgsh Cap sorter and applicator for lids and caps up to Ø 20 mm Operating principle When the machine starts, the caps and lids, which have been aligned in the sorter, are guided under the sealing and screwing heads using a feeding system. The sealing devices include screw cappers and lid pressers for stoppers and caps. 3 spiral conveyors for bottles, stoppers, and caps 1 screwing station 1 sealing station Container height: 55 mm Container diameter: 20 mm Lid diameter: 20 mm You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, axle configuration: 1 axle, first registration: 01/2000, tire size: 8.25R16, color: green, Year of construction: 2000, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 1 axle, BPW axles, tarpaulin, front support, rear support Superstructure: Plastic water tank 1000l / ARCHIVE IMAGES! Ex-Bundeswehr! Air brake! 40mm drawbar! If the trailer is purchased with a valid inspection certificate, the price is €3,900.00 net! The tank is currently still in the trailer but can be removed immediately! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Gsdei Rrr Iopfx Aqgouh

Year of construction: 2008, condition: excellent (used), functionality: fully functional, For sale is a 6-axis placement robot from Erowa, this was used to load 2 die-sinking EDM machines from Ingersoll, both with tools and workpieces. The Ingersoll machines are also for sale and can be offered as a package Technical data: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° B-axis: +/- 90 ° Y-axis: 1.1-18.74 m Gujdpfstdrkqex Aqgoh Disassembly, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Year of construction: 2026, Putz P4 cement For on-site preparation of plasters CEMENT, SAND, LIME Pump motor 5.5 kw Mixer motor 2,2 kw 55/min Capacity for 2L6 pump approx. 25 l/min Capacity for 2L6 pump +++ 45 l/min Compressor 350 l/m Tank capacity 130 l Mixer capacity 130 l Height to mixer 118 cm Height to pump tank 71 cm Width of pump tank 64 cm Guodpfxetuiqyo Aqgsh Length without shoe 165 cm Weight 360 kg Included Working hose Air hose Spray gun Hose cleaning ball Shneka 2L6

Condition: good (used), functionality: fully functional, mileage: 656,630 km, power: 191 kW (259.69 HP), first registration: 07/2000, fuel type: diesel, maximum load weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,700 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel-air, Year of construction: 2000, operation weight: 16,220 kg, Equipment: ABS, air conditioning, differential lock, hydraulics, Scania P94D260 Tank car for three tanks 18.950L with pump and pump 6x2 vorn blattgefedert - hinten luftgefedert Differentialsperre Manual getriebe Euro 2 (In Italian konform Euro 5) ADR designed for FL-AT zGG 26.000kg - Nutzlast 16.220kg Total length LKW 8.31m Radstand 3.70m Reifen 50% 250L Tank Guodpotuwdkjfx Aqgoh 3. Achse höhenverstellbar und lenkbar Sonnenblende Nebelscheinwerfer Climate ABS Exportnettopreis 18,500.00 Euros alle Angaben ohne Gewähr/Irrtum advance

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: white, driver cabin: other, gearing type: other, Year of construction: 2000, Vehicle location: Bovenden, storage box, 2 compartments Godpfx Aqjwqn Rljgsuh Body: Esterer tank body for heating oil & diesel with 2 compartments approx. 13,350L (5,950L/7,400L) Dismantled from DAIMLER-BENZ Actros 1831 4x2 with 3,900mm wheelbase! Next leak and functional test in 03/2027! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! - .

Condition: new, maximum load weight: 11,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 3,330 mm, Year of construction: 2025, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ KROLL Suction-Pressure Tank Trailer ADR (internal no. #518) Type K 14.0/36 PEAH --- Tank code L4BH Suitable for the collection and transport of liquids and sludges. Total capacity approx. 14,000 liters (air volume) Sludge chamber (behind piston) approx. 12,000 liters (air volume) Gsdpsxc S Aaofx Aqgeuh Tank material: S355J2G3 Shell wall thickness: 7 mm Flange pair "LONG LIFE" Closure bottom can be opened by 2 hydraulic cylinders Closure bottom locking with tension claws, hammer head bolts and galvanized linkage Pneumatic lid locking Tank level indicator via internal float and external display scale Discharge apron made of aluminum Discharge by free flow and via piston Piping and fittings in DN100 Suction line DN100 Operator station rear right Chassis 9t BPW axles, air suspension with lift and lower valve for each axle Ball-bearing slewing ring and certified long drawbar Tires 4x 385/65R 22.5 Michelin Plastic mudguards Rear impact protection Side underrun protection 2 wheel chocks Dual-line air brake system with WABCO EBS, ABS, and TSS Hose lockers left and right on superstructure Toolbox LED work lights LED beacon lights 4x LED area lights Advertising panels left and right, 3000 x 650 mm For further details and/or pictures, please contact us directly. You will find a wide selection of other vehicles for SALE or RENT at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively in accordance with our terms and conditions and excludes any warranty.

Condition: used, mileage: 1,198,224 km, power: 301 kW (409.25 HP), first registration: 07/2006, fuel type: diesel, empty load weight: 9,300 kg, overall weight: 26,000 kg, axle configuration: 3 axles, color: other, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: air, Equipment: differential lock, trailer coupling, Manufacturer: MAN - Type/Model: TGA 03 - First registration: 03/07/2006 - Mileage: 1,198,224 km - Number of axles: 3 - Emission standard: Euro 3 - Transmission: Manual gearbox - Suspension: Air - Lift axle - Brakes: Disc - Length: 9,624 mm - Width: 2,500 mm - Height: 3,442 mm - Unladen weight: 9,300 kg - Body manufacturer: Schwarte - Tank material: Stainless steel - Total tank capacity: 14,000 L - Tank compartments: 3 - CIP cleaning Guedpsxtuknefx Aqgoh

Condition: used, mileage: 673,000 km, power: 368 kW (500.34 HP), first registration: 05/2007, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - Retarder - Air conditioning - Lift and steering axle - Tank with 2 chambers, 13,100 liters Suspension: Godpfx Aqeyk Rgzsgeuh Leaf/air

Condition: used, mileage: 130,556 km, first registration: 01/1991, fuel type: diesel, overall weight: 17,000 kg, axle configuration: 2 axles, color: yellow, gearing type: mechanical, emission class: euro1, Equipment: all wheel drive, * Snow plough * Tank body * All-wheel drive 4x4 * Drum brakes * Manual gearbox ----Internal vehicle number: N395-----Errors & prior sale excepted WhatsApp support available! Gjdpfexy Ehqex Aqgjuh If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp.

Condition: used, mileage: 402,000 km, power: 250 kW (339.91 HP), first registration: 01/2011, fuel type: diesel, overall weight: 17,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - Retarder - Air conditioning - Manual transmission - Schwarzmüller 11'950L Suspension: leaf/air Godjyflg Sjpfx Aqgeuh

Condition: new, color: grey, Empty weight: 35.000 kg Dimensions (LxBxH): 360 x 360 x 1250 cm Cargo space capacity: 384.000 l Number of fillers: 2 500 Tonness CAPACITY BOLTED CEMENT SILO TECHNICAL SPECIFICATIONS SILO CAPACITY 500 TONS, 385 m³ (cement density as 1,3 ton/m³) SILO HEIGHT 19.945 mm SILO DIAMETER Ø 6.180 mm QUANTITY OF SILO LEGS 6 SILO OUTPUT DIAMETER Ø 300 mm Gjdoygk Auspfx Aqgjuh NUMBER OF COMPONENTS 250 SILO WEIGHT 28.000 kg(Wtih Legs:35000kgs) MATERIAL OF SILO LEGS Ø273 x 12 mm STEEL PIPE SUPPORTS OF SILO LEG NPL 80 mm CORNER IRON SHEET METALS OF SILO LEG 20 mm CONICAL PART SUPPORT MATERIAL 200 mm STEEL C CHANNEL CONICAL PART MATERIAL ST- 37, 8 mm SHEET METAL SILO BODY MATERIAL ST -37, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL ST -37, 6 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns