Used Liquid Separator for sale (8,996)

Condition: new, functionality: fully functional, SALVATORE ROBUSCHI RCC 32-20C cantilever pump – 5.5 kW – 15 m³/h Industrial vertical cantilever pump by Salvatore Robuschi, equipped with a vortex impeller and FELM IE3 three-phase motor. Assembly includes a long immersion column, separate discharge pipe, mounting plate and guarded coupling. Designed for installation above a tank or sump. The cantilever construction requires no submerged shaft bearings or bushes. Suitable for various industrial liquids and solids-laden liquids, subject to material compatibility and operating conditions. Type: RCC 32-20C Serial number: 2010042272 Nameplate date: 06/2022 Nameplate duty point: 15 m³/h at 12.3 m head Motor: FELM FA3-132S-4, 5.5 kW Supply: 400 V delta / 690 V star, three-phase, 50 Hz Rated current: 10.9 / 6.3 A Nlsdpfo Aa Dbysx Ab Reh Speed: 1,450 rpm Efficiency class: IE3 Protection: IP55; insulation class F Pump casing in corrosion-resistant cast stainless steel CF8M (EN 1.4408, cast equivalent of AISI 316)

Condition: new, Chip container, 0.4 m³, L1430xW840xH605 mm, yellow-orange, load capacity 300 kg · For collecting and disposing of bulk goods and industrial waste Nlsdpfx Abj Acnqks Rsh · Specifically designed for collecting and separating liquids from solids · Robust steel sheet construction with edge reinforcement Bin: low Length: 1390 mm Height: 610 mm Fork pocket internal dimensions A/B/C: 455/170/55 mm Color: yellow-orange, RAL 2000 Load capacity: 300 kg Capacity: 400 l Width: 840 mm Weight: 77 kg

Condition: new, Chip container, 0.4 m³, L1430 x W840 x H605 mm, galvanized, load capacity 300 kg · For collecting and disposing of bulk materials and industrial waste · Specifically designed for collecting and separating liquids from solids · Sturdy steel sheet construction with edge reinforcement · Nledpfx Ao Acnqqeb Reh Capacity: 400 l Color: galvanized Fork pocket internal dimensions A/B/C: 455/170/55 mm Length: 1390 mm Weight: 83 kg Tray: low Load capacity: 300 kg Height: 610 mm Width: 840 mm

Condition: new, Chip container, 0.25 m³, L1115 x W590 x H740 mm, yellow-orange, load capacity 300 kg · For collecting and disposing of bulk materials and industrial waste Nsdpfj Acnl Uex Ab Rslh · Specifically designed for collecting and separating liquids from solids · Sturdy steel sheet construction with edge reinforcement Load capacity: 300 kg Height: 740 mm Shape: box-shaped Weight: 70 kg Color: yellow-orange, RAL 2000 Length: 1130 mm Width: 590 mm Internal dimensions of the forklift pockets A/B/C: 205/170/55 mm Capacity: 250 l

Condition: new, Chip container, 0.25 m³, L1115 x W590 x H740 mm, galvanized, load capacity 300 kg · For collecting and disposing of bulk goods and industrial waste · Specifically designed for collecting and separating liquids from solids · Sturdy steel sheet construction with edge reinforcement · Width: 590 mm Weight: 64 kg Nlsdpo Acnmfefx Ab Rjh Internal dimensions of the pocket: A/B/C: 205/170/55 mm Capacity: 250 l Height: 740 mm Shape: box-shaped Length: 1130 mm Color: galvanized Load capacity: 300 kg

Condition: new, Chip container, 0.4 m³, L1320xW670xH840mm, galvanized, load capacity 300 kg · For collecting and disposing of bulk materials and industrial waste · Specifically designed for collecting and separating liquids from solids · Robust steel sheet construction with edge reinforcement · Length: 1320 mm Weight: 80 kg Internal dimensions of the entry pocket A/B/C: 285/170/55 mm Capacity: 400 l Container: box-shaped Color: galvanized Height: 840 mm Load capacity: 300 kg Width: 670 mm Nlodpfx Ao Acnm Ejb Roh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, Submitting a bid obligates the bidder to collect the item by December 1, 2026. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 7040 (L62) Year of Manufacture: 2012 Operating Hours: need to be updated Working Area Working area X/Y/Z: 4,000 × 2,500 × 115 mm Speed: max. 304 m/min Accuracy: ±0.1 mm Laser Laser power: 2 × 4 kW Laser heads: 2 units Condition of laser heads: functional Cutting Capacities Sheet metal thickness steel: max. 20 mm Sheet metal thickness stainless steel: max. 15 mm Sheet metal thickness aluminum: max. 10 mm Control System Control system: Siemens Sinumerik 840 D SL Nlodpfx Abs Aayn Ns Roh Machine Dimensions and Weight Length: 15,800 mm Width: 7,280 mm Height: 3,090 mm Weight: 16,500 kg Environmental Conditions Ambient temperature: max. 43 °C EQUIPMENT Thin sheet metal productivity package for high-speed, standard, and compressed air cutting 2 lens cutting heads with 130 mm focal length Compressed air cutting BrightLine CoolLine with 2 separate lens cutting heads 4 clamping jaws, 2 per pallet Wide transverse conveyor belt “Wavebelt” with tilting container Tilting container to the left of the machine More powerful compact dust extractor Connection piece for the exhaust duct of the compact dust extractor MDE interface

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. Nlodpfx Aowcp I Aeb Rsh The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: used, Year of construction: 2013, Ammonia separator (from a refrigeration system with max. 180 kW) with 2 chambers 1 x for ice water and brewing water cooling to = +0.5°C 1 x for glycol cooling to = -10°C (=extension) Brewing water cooler (53 kW): Flow rate: 35 hl/h, inlet temperature: 15°C, outlet temperature: 2°C Ice water cooler (38 kW): Flow rate: 130 hl/h, inlet temperature: 4.5°C, outlet temperature: 2°C Nsdpfx Aexzqt Ujb Rolh Additional title: with 2 evaporators for water cooling Content: 595 l Pressure range: -1 bis 16 bar Temperature range: 50 °C Weight: 780 kg Position: frei stehend Base construction: Horizontal tank with stainless steel square tube base on dome feet Features: Insulation with bolted cladding, base frame with fittings and evaporator 1 (= heat exchanger for brewing water cooling) and evaporator 2 (= heat exchanger for ice water cooling)

Year of construction: 2022, condition: used, Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from reusable waste soil. Effective even with moist soil. Mixing in compost, sand, substrate, etc. is possible in a single pass during screening. Suitable for screening topsoil, construction waste, gravel. Ideal for backfilling structures and trench refilling, etc. Can also be adapted for other mesh sizes or shaft tasks upon request—please ask us for details. The separator comes from a buyback due to business closure. The separator has been inspected in our workshop and includes a 12-month warranty. Currently, an OQ45-5 is installed, which is not included in the price. Price: €1,750 Nsdpfx Asyfwdvjb Rjlh For excavators from 6 t For wheel loaders from 4 t Weight in kg: 600 Throughput: 23 m³/h Leak oil connection required: 2 Series: TSE.103.283

Year of construction: 2023, condition: new, Terra-Star TSG.152 Separator with Screening Shafts Separation of stones, branches, roots, turf, debris, etc., from still usable waste soil. Screening of topsoil, construction debris, backfilling of trench excavations, etc. Other applications also possible. Depending on requirements, shafts with different grain sizes or combination shafts can be installed. A Kramer wheel loader mounting is fitted, but not included in the price. For excavators from 7 t For wheel loaders from 5 t Weight in kg: 740 Throughput: 23 m³/h Leak oil connection required: 2 Nsdeyf Atcjpfx Ab Rolh Series: TSG.152.062

Year of construction: 2025, condition: used, Separator Terra-Star TSC.134, used, year of manufacture 2025. Maintenance-free, screening size 0- mm, mixing blocks M80X welded with armored wire in the wear zones. Application with mixing shafts: - Mixing in lime or binder agents for soil drying, blending with compost, sand, various soils, etc., while simultaneously breaking up soil clods. - Aerating, shredding, tearing, turning biomass, organic waste, and compost while at the same time separating twigs, roots, etc. that cannot be shredded. - Fragmenting brittle stones in construction debris such as pumice, bricks, Poroton, while simultaneously separating chunks above mm in size; larger and hard parts remain in the separator. - Feeding lumpy soil into a screening plant reduces waste and increases throughput. Equipped with Lehnhoff MS10 adapter system. Price does not include top plate. Njdsyf Atpjpfx Ab Rslh On return from rental, the machine is inspected and comes with a 12-month warranty. Suitable for excavators from 12 t Suitable for wheel loaders from 8 t Weight (kg): 1200 Throughput: 50 m³/h Drain line required: 2 Series: TSC.134.015

Year of construction: 2025, condition: like new (used), Separator Terra-Star TSC.134, used, year of manufacture 2025 Maintenance-free, screening line 0- mm, mixing blocks M80X Nsdpfx Aoyf Atveb Rjlh wear zones armoured with hardfacing wire. Application with mixing shafts: Mixing in lime or binding agents to dry soil, blending with compost, sand, other soils, etc. while simultaneously crushing soil clods. Aerating, shredding, tearing, and turning biomass, organic waste, and compost while simultaneously separating out branches, roots, etc. that cannot be shredded. Crushing friable stones from construction debris such as pumice, bricks, Poroton, while simultaneously separating pieces over mm in size; larger and hard parts remain in the separator. Feeding clumpy soil into a screen reduces waste and increases throughput. Equipped with OQ70/55. Price does not include adapter plate. For equipment returned from rental, the machine is inspected and comes with a 12-month warranty. For excavators from 12 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 50 m³/h Drain line connection required: 2 Series: TSC.134.018

Year of construction: 2024, condition: new, Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil, such as topsoil in landscaping and horticulture. Mixing of compost, sand, substrate, etc. in a single step during the screening process is easily possible. Screening of large stones from excavated soil. Screening of stones from various types of soil after demolition. Feeding clumped soil into a screening plant reduces waste and increases throughput. Price without adapter, other adapter types can also be installed. Nlsdpfx Aoyf At Ajb Roh Currently equipped with an OQ70/55 adapter. Suitable for excavators from 14 t Suitable for wheel loaders from 10 t Weight in kg: 1,450 Throughput: 44 - 65 m³/h Leak oil connection required: 2 Series: TSC.154.301

Condition: used, Year of construction: 2021, total height: 1,800 mm, total length: 1,200 mm, total width: 1,000 mm, overall weight: 150 kg, hose length: 10,000 mm, space requirement height: 1,800 mm, space requirement length: 1,200 mm, space requirement width: 1,000 mm, transport length: 1,200 mm, transport width: 1,000 mm, transport height: 1,800 mm, tank capacity: 50 l, No. 04521 Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Including approx. 10 m suction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Nledex Upqhspfx Ab Rsh Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, This listing is for the Labtec SciLog Tandem 1081 ChemTec Peristaltic Pump with Tandem Model 1081 Head The unit is in full working condition and is ready for immediate use Dual‑head design Equipped with two independent pump heads, allowing simultaneous delivery of two separate fluid lines or higher combined flowrate. Flow & pressure range Capable of delivering metered flow in applications like bioreactors, diafiltration, titration, and general chemical dosing. It handles pressures from 0 up to approximately 60 psi. Precise liquid metering Designed for volumetric and mass flow measurement tasks, maintaining consistency in dosing/reagent addition. Control interface Nlsdpfx Ajxhfg Njb Rjh Includes an RS‑232 serial interface for external control via software or integration into automation systems Use Cases Bio‑processing & fermentation: Automated nutrient or reagent addition in tandem line setups. Filtration processes: Controlling flow through membranes in diafiltration or tangential flow filtration. Titration and pH control: Precise dosing of acids/bases based on sensor or feedback-controller inputs. General lab fluid handling: Pumping corrosive or viscous liquids safely without contamination, thanks to peristaltic tubing.

Condition: used, This listing is for the PerkinElmer Chemagic™ 360 – Automated Nucleic Acid Extraction System The unit is in full working condition and is ready for immediate use. Each unit is on heavy duty trolley with lockable castors Nljdpfxjxhgm Rj Ab Reh The Perkin Elmer Chemagic™ 360 is a high-throughput, compact benchtop instrument designed for automated DNA and RNA extraction from a wide range of sample types, including blood, plasma, saliva, tissues, and FFPE samples. It uses chemagen’s proprietary M-PVA magnetic bead technology for the efficient and reliable purification of nucleic acids, delivering high yields with excellent purity. Key Features & Benefits Flexible Sample Volume: Processes volumes from 10 µL to 10 mL, supporting a variety of protocols and sample types. High Throughput: Handles up to 96 samples per run, ideal for biobanks, clinical labs, and research institutions. Large Kit Portion Compatibility: Supports processing of large-volume samples with high reagent capacity. Cross-Contamination Prevention: Engineered protocols and magnetic separation minimize the risk of sample-to-sample contamination. Mixed Sample Types: Able to process different sample materials in the same run, enhancing workflow efficiency. Integration Ready: Compatible with automated liquid handling platforms for streamlined workflows. Compact Footprint: Space-saving design with dimensions of 80 x 80 x 90 cm (L x W x H), suitable for constrained lab environments. Advanced Sample Handling: Offers convenient and improved sample management, reducing hands-on time. Barcode Scanning: Enables automated sample tracking and improves traceability throughout the process. LIMS Integration: Produces LIMS-compatible log files, supporting full data traceability and compliance. User-friendly Interface: Intuitive software for easy setup, protocol customization, and real-time monitoring. Technical Specifications Sample Capacity: 1–96 per run Sample Volume Range: 10 µL – 10 mL Processing Time: ~45 minutes for 400 µL whole blood Dimensions (L x W x H): 80 cm x 80 cm x 90 cm Weight: 140 kg Power Supply: 100–240 VAC, 50/60 Hz Ideal Applications Next-Generation Sequencing (NGS) PCR and qPCR Genotyping and MLPA Clinical Diagnostics Biobank Sample Preparation

Year of construction: 2024, condition: good (used), Application with screening shafts: Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil. Also effective with moist soil. The mixing of compost, sand, substrate, etc. in one operation during screening is easily possible. Screening of topsoil, construction debris, and gravel. Refilling of structures and trench backfilling, etc. Shafts for other grain sizes or applications can also be installed, please inquire for details. The mounted adapter can be purchased or modified, not included in the price. Nsdpfxow N Rxhs Ab Rslh For excavators from 4 t For wheel loaders from 3.5 t Weight in kg: 400 Throughput: 10.5 - 15 m³ / hour Leak oil connection required: no

Condition: new, Year of construction: 2013, functionality: fully functional, Liquid cooling system New and never used You are welcome to come for an inspection by appointment. Nljdsw Dfmqjpfx Ab Reh

Condition: good (used), Year of construction: 2000, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 20FT ISO CRYOGENIC TANK CONTAINER Manufacturer: Air Liquide Italia S.r.l. ISO Code 6346: 22KW IMO Portable Tank IMO Type 7 Transport Instructions: T75 ADR RID Tank Code: R11.7BN ISO Code 6346: 22KW Max. working pressure: 8 bar Hydr. test pressure: 11.7 bar Design Temperature: min -196 °C Material (Inner & Outer Vessel): High-grade Stainless Steel (X5CrNiN1810 UNI 7500) Insulation: Vacuum Double Envelope (Excellent current vacuum: 0.052 mbar) Safety Valves: 2x Herose Relief Valves (Set at 8 Bar) (p. 1) Vaporizers: Included & complete with piping Last Inspection: June 9, 2026 (5-Year Periodic Inspection by Bureau Veritas) Next Inspection Due: 12-2028 CSC Validity: Until 12-2028 (p. 1) Approval/Regulations: IMDG, ADR, RID, CSC, US DOT (p. 1) = Further Information = Year of Construction: July 2000 Model Year: 2000 Usable Material: Gas Unladen Weight: 8,300 kg Payload: 25,700 kg Nedpfezd Saujx Ab Relh GVW: 34,000 kg Technical Condition: good Optical Condition: good Please contact Arne Honingh for further information.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1605269/1, total width: 630 mm, total height: 1,115 mm, total length: 1,010 mm, working width: 460 mm, input voltage: 400 V, type of input current: AC, overall weight: 200 kg, power: 0.37 kW (0.50 HP), roller diameter: 100 mm, passage height: 80 mm, feed rate X-axis: 35 m/min, height adjustment type: mechanical, tank capacity: 2 l, roll width: 450 mm, input frequency: 50 Hz, workpiece height (max.): 80 mm, Equipment: double-sided, For sale is a well-maintained glue and roller application machine from Axel Wirth Maschinen GmbH, type LW 100/450. The machine was manufactured in 2021, has comparatively few operating hours, and is in technically perfect and well-maintained condition. A particular advantage is the adjustable working speed or feed rate (6 - 35 m/min). This allows the machine to be flexibly adapted to different workpieces, materials, and application media. The machine is mounted on a sturdy, mobile base with lockable wheels. As a result, it can be easily moved within the production area and safely positioned at the respective location. A total of two identical machines are available. The stated price applies per machine. An attractive package price is possible if both machines are purchased. The LW 100/450 is suitable for the uniform application of liquid and pasty media onto flat or textured workpieces, for example: - Glue and adhesive - Oil and wax - Stain and primer - Paints and dispersions - Resins and comparable application media Njdpfxszr H Aaj Ab Rslh Among other materials, wood, solid wood, parquet flooring, chipboard, cork, cardboard, metal, stone, rubber, and insulation materials can be processed. The application quantity can be adjusted via the lateral adjustment devices. The rollers and glue trays can be removed with a few simple steps, making the machine easy to clean. Technical data and equipment Manufacturer: Axel Wirth Maschinen GmbH Type: LW 100/450 Year of manufacture: 2021 Nominal width: 450 mm Working width: approx. 460 mm Passage height: approx. 80 mm Diameter of the application rollers: 100 mm Capacity per glue container: approx. 2.3 liters Drive power: 0.37 kW Adjustable working speed or feed rate Application rollers above and below Separate control cabinet Main switch and emergency stop Mobile base with lockable wheels CE marking Condition: used, well-maintained, and technically perfect Operating hours: comparatively low Inspection and test run are possible after prior appointment. Collection at the Leun location. Shipping by freight forwarder can be organized if required, upon agreement. If you have any questions or are interested, please do not hesitate to contact us. We will be happy to provide further information and photos. Price: €5,900 (negotiable) per machine plus VAT (can be shown). Package price for both machines: on request All information is provided to the best of our knowledge. The sale takes place under the conditions applicable to the seller for used machines.

Condition: used, Year of construction: 2004, We are offering this used STORK MPS B.V. bone separator. Type no: DMM50; Serial no: B27-13B; Order no: BX152004; Voltage: 400V; PHASE/Hz: 3/50; Netherlands; Year of manufacture: 2004. Control cabinet is not included. Net price: 7,000 EUR. Price negotiable. Nljdpfsy Hi A Uox Ab Reh

Condition: used, suitable for nitrogen Njdpfx Asz E H Nwsb Rjlh all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: excellent (used), mileage: 367,284 km, first registration: 02/2005, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 13,000 l, driver cabin: day cab, emission class: euro3, suspension: steel-air, loading space volume: 13 m³, Year of construction: 2005, = Additional Options and Accessories = - PTO = Notes = Mercedes Benz Actros 2541 6x2-4, 13,000L sewer cleaning and suction truck, Wittig vacuum pump, high-pressure pump For sale is a Mercedes Benz Actros 2541 6x2-4 sewer cleaning and suction truck. A fully equipped vehicle for professional sewer cleaning, suction, and cleaning operations. The vehicle is equipped with a steel tank with a total volume of 13,000 liters. The body features a powerful Wittig RFW 200 DUL vacuum pump and a separate high-pressure pump. Technical specifications: Mercedes Benz Actros 2541. 6x2-4 configuration. Mileage, 367,289 km. Cruise control. EPS transmission, 3 pedals. Electric windows and mirrors. Wheelbase, approx. 4.20 m. Trailer coupling. Hydraulic connection at the rear. Body and pumps. Steel tank. Total tank volume, 13,000 liters. Wittig RFW 200 DUL vacuum pump. High-pressure pump. Suitable for suction and cleaning operations. Suspension and tires. Front axle, leaf suspension, tires approx. 70 percent. Drive axle, air suspension, tires approx. 70 percent. Steerable lift axle, air suspension, tires approx. 40 percent. The combination of a 13,000-liter tank, vacuum pump, and high-pressure system makes this Mercedes Benz Actros suitable for sewer cleaning as well as for sucking up and transporting liquids and sludge. Inspection and testing are possible at our location in Deventer. For more information, additional photos, videos, or technical data, you can contact us directly. Contact via WhatsApp is also possible. Pieter Haverhoek. Haverhoek Trucks B.V. Zweedsestraat 6. 7418 BG Deventer. Netherlands. Telephone and WhatsApp, . . = Additional Information = Front axle: Steered; Tire tread left: 70%; Tire tread right: 70%; Suspension: Leaf suspension Rear axle 1: Tire tread left: 70%; Tire tread right: 70%; Suspension: Air suspension Rear axle 2: Lift axle; Steered; Tire tread left: 40%; Tire tread right: 40%; Suspension: Air suspension Nsdjz A T Rcjpfx Ab Rolh Unladen weight: 14,800 kg Payload: 11,200 kg GVW: 26,000 kg Technical condition: very good Optical condition: good

Year of construction: 2012, condition: used, functionality: fully functional, PERMOLEX-POLAR K 81 H – a complete process line for de-oiling and separating metal chips. For sale is a complete industrial system for de-oiling, oil removal, and separation of aluminum and steel chips. Type: Permolex-Polar K 81 H Year of manufacture: 2012 Application: de-oiling and separation of loose aluminum and steel chips Capacity: max. approx. 3.4–6 m³/h Throughput: approx. 160 tons of chips per month Control: Siemens SIMATIC S7-300 / operator panel TP177B Rotational speed: 980 rpm Power supply: 400 V / 50 Hz Offered for sale is a complete set of equipment forming an industrial system for centrifuging liquids from chips and further separating aluminum and steel chips. The process includes: chip feeding → buffer tank → conveyor → PERMOLEX-POLAR centrifuge → oil/coolant discharge → magnetic separation → chip separation → transport to containers. Chip transfer points are enclosed, which reduces the lifting of material during transport. The system includes: • PERMOLEX-POLAR K 81 H chip centrifuge, • approx. 7.5 m³ buffer tank for chips, • 3 x KF 600 scraper conveyor, • double separating shaft with neodymium magnets, • vibratory conveyor, • approx. 250 l oil/coolant tank, • submersible pumps, • floor trays, • complete Rittal control cabinet, • Siemens S7-300 controller, • TP177B operator panel, • supporting structures and system components. Application The system is designed for the continuous processing of a mixture of aluminum and steel chips. The process includes: chip feeding → de-oiling/oil removal → separation of steel fraction → transport of separated chips to tanks/containers. Nodpsz Hw R Uofx Ab Relh The system is designed for handling large quantities of material and features automatic control and level monitoring. Technical condition Used equipment from an industrial installation. The photos show signs of normal operation, dirt, and surface wear on the components. It is recommended to inspect and verify the completeness and technical condition of individual components before purchase. Sold as a complete system or individually, as agreed. Due to its size and complex structure, dismantling, loading, and transport require prior agreement. Technical/design documentation regarding the equipment layout can be provided to interested buyers. 📞 Contact Interested parties are invited to contact us for pricing, additional photos, technical documentation, and to arrange an inspection.