Used Lithec Lithoflash Inline Hbdm Xl75 for sale (559)

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, DESCRIPTION Beck-Packautomaten Series Packer S1750 X Fully automatic film packaging machine for four-side product sealing Fully automated, conveyor belt feeding with light barrier control Operation: The Beck series packer operates fully automatically with photoelectric product detection. The goods to be packaged are conveyed on a transport belt into the cross sealing unit and are then sealed on all four sides in a step-by-step process. The film rolls are positioned above and below the transport belt. For the production of tight shrink packs, the packaging machine can be expanded into a complete film packaging line by integrating the proven, energy-saving Beck heat shrink tunnel. Technical data: Standard operator side: right Sealing bar width: 550 mm Sealing bar closure: servo-driven Sealing system: permanently heated Pass-through height: 100 mm Infeed belt width: 140 mm Outfeed belt width: 140 mm Product width: 150–500 mm Product length: 30 mm up to unlimited, with closure of sealing bar gap Speed control: infinitely variable with frequency converter from 19–40 m/min Capacity: up to 50 cycles/min* Longitudinal sealing: continuous operation Film: flat film, printed or plain, from 11 to 80 micron Film width: max. 650 mm Film roll diameter: max. 300 mm Machine length: 2,550 mm Machine width: 1,600 mm Machine height: approx. 1,700 mm Working height: 800–950 mm Electrical connection: 3N400V 50 Hz Connected load: approx. 3 kW Paint finish: cream white / green * Machine output depends on equipment, product, and film. Description: • Machine frame in steel sandwich construction • The sealing system is permanently heated and maintenance-free • With freely-programmable Siemens S7 PLC • Siemens operator panel: digital control unit OP7 • Easy format changeover via central width and height adjustment • Format data storage with simple menu and operator guidance • Inline product feeding, product indexing via light barrier, optionally horizontal or vertical scanning • Hold-down plates at the cross sealer with product scanning • Longitudinal sealing electrically actuated • Film unwind device integrated in the machine frame, without plug-in shaft (allows easy and quick film roll change) • Film rewind device with film break-control, high roll capacity • Film feed motor-driven, including end-of-film detection • Machine hood for optimum accessibility, all safety windows equipped with safety switches • Beck packaging systems meet CE conformity requirements Crodpfsy H Dynjx Ad Njb Additional equipment: - Rotary encoder, swing-away side sealing system, needle perforation unit for the top film

Condition: used, Year of construction: 2007, The Horizon StitchLiner 5500, manufactured by Horizon in 2007, is a machine with a format of 350 x 500 mm currently in production and located in Germany. This machine includes two VAC-100a and VAC-100m collating towers, an ST-40 stacker, an ACF-30 accumulator and folder, an SPF-30 saddle stitcher, an HTS-30 three-knife trimmer, and a TB-30 transport belt. Key features include 20 stations, a U-shaped layout for efficient space utilization and easy monitoring, inline production from collating to the finished product, and variable data processing for personalized printing. It offers fully automatic format adjustment for quick job changes and a touchscreen for user-friendly operation, even for less experienced operators. Crjdpfx Aovfx Ncsd Nob The specifications include handling sheet sizes from a maximum of 500 x 350 mm to a minimum of 148 x 120 mm, with a paper weight range of 40-350 gsm. It can process thicknesses from 8 to 200 pages, with a maximum spine thickness of 5 mm, and achieves a production speed of up to 5,500 booklets per hour. Technical details include a trimming size (untrimmed) from a maximum of 350 x 250 mm to a minimum of 140 x 103 mm, and a trimming size (trimmed) from a maximum of 312 x 230 mm to a minimum of 120 x 95 mm. The machine requires a power supply of 400V/50Hz. The delivery terms are FCA. Format: 350 x 500 mm Equipment: This StitchLiner 5500 includes the following components 2x VAC-100a and VAC-100m Collating Towers ST-40 Stacker ACF-30 Accumulator and Folder SPF-30 Saddle Stitcher HTS-30 Three-Knife Trimmer TB-30 Transport Belt Key Features:- 20 stations- U-shaped layout: Efficient space utilization and easy monitoring- Inline production from collating to finished product- Variable data processing: Handles personalized p printing- Fully automatic format adjustment for quick job changes- Touchscreen for user-friendly operation, even for less experienced operators Specifications:- Sheet sizes: Max. 500 x 350 mm, Min. 148 x 120 mm- Paper weight: 40-350 gsm- Processing thickness: 8-200 pages (max. 5 mm spine thickness)- Production speed: Up to 5,500 booklets/ Technical Details:- Trimming (untrimmed): Max. 350 x 250 mm, Min. 140 x 103 mm- Trimming (trimmed): Max. 312 x 230 mm, Min. 120 x 95 mm- Power supply: 400V / 50Hz- Space requirement: Min. 5,709 x

Condition: used, Year of construction: 2003, The BVM Compacta Trend 6020 is a high-performance shrink-wrapping machine designed for efficient and reliable packaging tasks. Manufactured in 2003, this machine is currently in production and located in Germany. It features side sealing and operates in a fully automatic function mode, ensuring consistent and precise wrapping. The Compacta Trend 6020 is suitable for a variety of product applications, including paper, packaging machines, tape strips, and stacks. With a capacity of 60 packages per minute, it can handle materials with a width of 500 mm (19.7 inches) and a length of 450 mm (17.7 inches). Its side sealing capability and inline operation make it an ideal choice for high-volume packaging tasks, ensuring that products are securely wrapped and protected. Crjdpfewc T N Rsx Ad Neb Format: 650 mm Equipment: Shrink-wrapping machine with side sealing Function modefully automatic Product applicationsPaper, for packaging machines, for tape strips, stacks Further propertieswith side sealing, inline, foils Capacity 60 p/min Width 500 mm(19.7 in) Length 450 mm(17.7 in)

Condition: new, Year of construction: 2024, GG 015 EURO 5 The new Günter Grossmann GG015 compact loader. The loader Günter Grossmann GG015 (1500 kg payload) is brand new. Günter Grossmann is a high-quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very fine. The control panel is very nice and clear. The cab is soundproofed, insulated, equipped with heating, very comfortable and nicely glazed which allows working safely and comfortably. The machine has a very durable construction. The machine is equipped with a quick coupler, which allows accessories to be changed quickly without leaving the cab. Additional equipment: 4 in 1 bucket, alligator grapple, alligator grapple for trees, straw or silage. We are the largest dealer in Poland, Czech Republic and Hungary. We have all spare parts for our branded machines. GG015 loader + bucket + pallet forks + quick coupling Specification Model GG015 Engine Xinchai euro 5 Engine type: Inline, water-cooled four-stroke diesel engine Crodpfx Adsu Dcgye Nsb Rated output: 36.8KW -( 50hp ) Rated speed: 2200 rev/min (rpm) Steering: Fully hydraulic Pressure in the system: 1.2 ~ 1.5 MPa Brake One hydraulic brake on four wheels Parking brake: manual tire 12-16.5 Wheelbase: 2100 mm Track: 1720 mm MAIN DIMENSIONS Overall length (bucket on ground): 5200 mm Overall height: 2730 mm Overall width: 1540 mm RANGE Bucket capacity: 0.7 m3 Bucket width: 1750 mm Max. breaking force: 36.8KN Capacity: 1500 kg Machine weight: 3550 kg Driving: Four-wheel drive Min. Turning radius: 4500 mm Unloading height: 2650 mm Drive system: Hydraulic transducer

Condition: used, Year of construction: 2000, operating hours: 26,600 h, machine/vehicle number: LC612, Used Tetra pak line Overhauled TBA 19 200 ml slim Technical Specifications & Performance DataThis used bottling line is a second hand Tetra Pak aseptic carton packaging solution configured for 200 ml Slim packs. It is engineered for industrial packaging and beverage production of milk and juice products, with reliable performance and efficient downstream handling.Configuration: Tetra Pak TBA/19 200B Slim filler + TSA21 straw applicator + TCP70 case packer + conveyor line + line controller and paper trolleyProduction speed: up to 7,500 packs/hourPack volume: 200 ml SlimFilling technology: AsepticContainer type: Carton (brick packs)Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70Operating hours: 26,600Indicative years: filler 2000, packer 2008, straw applicator 2000Advanced Automation & Control SystemsThe line is equipped with industrial automation architecture suitable for high-uptime food and beverage operations. Assessment indicates a GE PLC platform on downstream equipment with recommended PLC and I/O cover upgrades to ensure long-term reliability.Control: Central line controller with integrated conveyor logicPLC/HMI: GE PLC upgrade recommended for DE modulesChangeover: 200 ml Slim change kit included; additional format parts may be required for other sizesSafety: Guarding and interlocks typical of aseptic packaging machineryProduction Line Integration CapabilitiesThis second hand bottling equipment is designed for inline operation from aseptic filling through straw application and case packing. Conveyors provide smooth transfer between machines, enabling balanced production flow and efficient accumulation.Inline operation: Filler → Straw applicator → Case packerMaterial handling: Conveyor line with integration to line controllerApplication range: Ideal for milk and juice in 200 ml Slim cartonsScalability: Potential to adapt to additional carton sizes with proper change partsMachine Condition & Maintenance HistoryThe line has been assessed after maintenance activities and prior to full recommissioning. The filler can be operated up to production step (water test completed). Downstream equipment (DE) powers on but requires further interventions before heating and full operation. An overhaul is recommended with component replacements across superstructure, machine body, jaw system, final folder, service unit, strip applicator, and electrical systems.Current status: Under maintenance/refurbishmentCondition summary: Filler fair-to-poor; DE in poor condition; overhaul advised (6,000/8,000/12,000-hour packages)Operational Performance & VersatilityEngineered by Tetra Pak for aseptic beverage production, the line supports long-life products such as UHT milk and ambient juices. The TSA21 straw applicator ex... Csdoyvilzopfx Ad Nerb

Condition: used, Year of construction: 2021, operating hours: 36,090 h, machine/vehicle number: LC626, Used Tetra Pak Cap30flex - year 2014Technical Specifications & Performance DataThis second hand Tetra Pak Cap 30 Flex is a high‑reliability cap applicator engineered for industrial packaging and beverage production lines. It is configured for HeliCap 26 Pro closures and optimized for the Square 1000 package format, corresponding to 1.0L cartons. Built for continuous operation, it supports modern used bottling line upgrades and integration with existing carton filling and downstream packaging equipment.Manufacturer: Tetra PakModel: Cap 30 FlexYear: 2021Closure type: HeliCap 26 ProPackage format: Square 1000 (1.0L carton)Container compatibility: CartonCompliance: CE markedApplication: Cap application/capping for carton packagesAdvanced Automation & Control SystemsThe Cap 30 Flex is designed with robust automation architecture for precise, repeatable cap application. Typical features include PLC-based control, an HMI for recipe selection and format management, and coordinated drives for accurate positioning and torque control. Integrated sensors support cap presence detection and fault handling to minimize downtime. Quick access panels and guided diagnostics streamline routine checks, while recipe parameters help reduce human error during changeovers.Production Line Integration CapabilitiesEngineered to interface seamlessly with Tetra Pak filling machines and standard conveyor systems, this capping machine fits inline as part of a complete packaging solution. The cap feeder and chute are designed to maintain stable, high-throughput cap delivery with minimal jams. Mechanical and electrical interfaces facilitate synchronization with upstream filling and downstream inspection, case packing, and palletizing equipment, enabling flexible second hand bottling equipment configurations for beverage production.Machine Condition & Maintenance HistoryThe machine is currently disconnected, indicating it has been removed from production and prepared for relocation and recommissioning. Its CE marking and recent manufacturing year contribute to a solid foundation for reliable operation after standard installation, alignment, and validation procedures typically performed during start-up of used bottling equipment.Operational Performance & VersatilityConfigured for HeliCap 26 Pro closures on Square 1000 cartons, the Cap 30 Flex delivers consistent application quality suitable for demanding beverage packaging standards. Its design supports precise cap alignment and secure application to protect product integrity throughout the supply chain. The system’s modular nature helps accommodate line layout constraints and supports continuous runs common in industrial packaging environments.Installation Requirements & Site PreparationInstallation typically requires stable flooring, adequate space for the cap feeder and operator access, and standard utilities appropriate for packaging machinery, including electrical power and compressed air. Proper line height alignment with the filler and conveyors ensures smooth package handling. Commissioning includes control ... Crjdpfx Aey I R Hqed Neb

Condition: used, mileage: 164,014 km, power: 200 kW (271.92 HP), first registration: 06/2022, fuel type: diesel, maximum load weight: 8,095 kg, overall weight: 15,000 kg, axle configuration: 4x2, wheelbase: 5,360 mm, color: blue, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, loading space volume: 44 m³, loading space length: 7,260 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, Year of construction: 2022, Equipment: air conditioning, cruise control, tail-lift, trailer coupling, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is specified, it will be converted at the current daily exchange rate. The valid currency is that of the vehicle's location. Engine: OM936, inline 6-cylinder, 7.7 l, 200 kW (272 hp), 1,100 Nm, High Performance Engine Brake, air suspension, rear axle, trailer brake, dual-circuit, trailer coupling, S cab, S cab, adjustable air deflector, central locking system, with remote central locking, air conditioning, comfort driver's air-sprung seat, electric windows on both sides, rain sensor, lane departure warning system, Active Brake Assist, driver's airbag, cruise control, tail lift Bär, type: BC. 1500 S4L-A5, 1,500 kg, 1,785 mm aluminium platform, tarpaulin frame/tarpaulin, BWK, left/right, split, height: 500 mm, aluminium, loading floor with 13 recessed lashing rings per side (left/right), body: Junge. Crodpfey I Eylox Ad Neb

Condition: used, mileage: 377,696 km, power: 330 kW (448.67 HP), first registration: 03/2022, fuel type: diesel, maximum load weight: 9,983 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: retarder, color: red, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, Year of construction: 2022, Equipment: ABS, air conditioning, parking heater, traction control, This offer is non-binding. Errors and prior sale reserved. If a foreign currency is specified, it will be converted at the current daily exchange rate. The currency of the vehicle's location is valid. Waste heat utilization, OM471 engine, inline-6, 12.8 L, 330 kW (449 hp), 2200 Nm, High Performance Engine Brake, axle configuration 4x2, front axle air-suspended, cab suspension comfort, steel-sprung, secondary water retarder, wheelbase 3700 mm, tank 660 L + 75 L AdBlue aluminum, with access steps, additional tank 290 L aluminum, L-cab, L-cab, cab width 2.50 m, BigSpace, central locking system, with remote central locking, comfort bed lower, comfort bed upper, electric stationary air conditioning, automatic climate control, auxiliary hot-water heater, driver comfort suspension seat, electronic braking system with ABS and ASR, reversing warning system combined with hazard warning lights, rain sensor, lane keeping assist, distance control assist, attention assist, traffic sign assist, driver's airbag. Crjdpfx Adsy I Ex Io Njb

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, number of seats: 30, gearing type: automatic, emission class: euro6, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, New vehicle without registration, immediately available with automatic transmission! Including 8 x Facelift Model The ideal school bus or small coach for groups with a limited budget. Built for Germany with double glazing, auxiliary heating, 24 months warranty 29 sleeper seats with folding tables ----General vehicle data: * Length: 7,168 mm * Width: 2,262 mm * Height: 3,352 mm * Wheelbase: 3,350 mm * Front/rear overhang: 1,613 mm / 2,205 mm * Turning circle diameter: 12,200 mm * Passenger capacity: 29 + 1 * Permissible total weight: 8,160 kg * Diesel tank volume: 160 l * Ad Blue tank: 12 l Drive: Csdpfx Adsy Irp Hj Njrb * Type: E6 MFTBC 4P10-HAT4 (Mitsubishi) * 4-cylinder inline engine * Automatic transmission type: MFTBC M038S5 * Emissions standard: Euro 6e * Displacement: 2,998 cm³ * Output: 110 kW / 150 HP at 3,500 rpm * Max. torque: 370 Nm at 1,320 rpm * Engine compartment fire suppression system Braking system and safety features: * Disc brakes * EBS (Electronic Braking System) * ESP (Electronic Stability Program) * ABS (Anti-lock Braking System) * ASR (Traction Control) * AEBS (Emergency Braking Assistant) * LDWS (Lane Departure Warning System) Air conditioning / Heating / Ventilation: * Rooftop air conditioning unit: Safkar * Convector heaters on side walls * 1 manually operated roof hatch * Additional heating: Eberspächer Doors: * Door 1: single leaf, front * Door 2: single leaf, rear * Pneumatic control Accessories: * Fire extinguisher: 1 x 6 kg * First aid kit * Emergency hammer Our company has been in business for 35 years. You can view and test-drive the vehicles with us. You will be welcomed at our business premises, not at some parking lot with a company address that's just a mailbox at an apartment building. Such mailboxes tend to disappear after a few months.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, total height: 2,840 mm, table load: 600 kg, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Credpfxex D Nigo Ad Nsb Additional equipment • Job Shop package • Renishaw PP40 wireless workpiece probe • TS27R tool measurement probe • Scraper-type chip conveyor • Coolant tank capacity: 200 L (left side) • Coolant pump: 20 bar internal through-spindle coolant • Machine enclosure roof • LED work area lighting Machine Benefits • Table size: 850 × 650 mm • 24-position automatic tool changer with double gripper • Voltage: 3 × 400V Extra Information • The machine is in fully functional condition • Tested and confirmed by DMG service report, including accuracy measurements • Complete documentation is available • Currently disconnected from power Dimensions Machine Depth 3065 mm Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, mileage: 112,529 km, power: 170 kW (231.14 HP), axle configuration: 4x2, color: green, driver cabin: day cab, gearing type: automatic, suspension: air, total width: 25,500 mm, total height: 37,000 mm, loading space length: 65,600 mm, loading space width: 24,700 mm, loading space height: 23,700 mm, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone). Mercedes-Benz Atego 1223 L 4x2 Box Truck + Tail Lift Crsdpsy H Ut Ssfx Ad Njb Tail lift: Palfinger MBB C 2000 S (2,000 kg) Front axle: 5.3 t, Rear axle: crown wheel 390, hypoid, 11.0 t, differential lock on rear axle, axle ratio i = 3.909. Electronic braking system with ABS and ASR, electronic compressed air supply unit (low), heating, electronic compressed air supply unit, disc brakes front and rear axle, condensate monitoring for compressed air system. Wheelbase 4,760 mm, ZF 8095 steering, stabilizer underframe on rear axle, front underrun protection (ECE, steel), side safety device, splash protection in wheel arch, rear underrun protection omitted (ECE). Driver's air-suspended comfort seat, simple co-driver's rigid seat, armrests on both sides of driver seat, seat upholstery velour, classic cockpit, electric windows both sides, air conditioning, pollen filter. Over-windscreen compartment (1 section), high storage on engine tunnel, storage behind base box, roof hatch/vent, Exide batteries, battery cover, 2 x 12V/165Ah low-maintenance batteries, 28V/100A alternator, 24V/15A additional socket. Bulkhead, switch no. 1 for external body electrics, reversing alarm, wired remote control for air suspension, pre-installation for tail lift operation. S-ClassicSpace Cab, extended, 2.30 m, tunnel, lockable aerodynamic fairings, exterior sun visor (transparent), heated front mirror, main mirror electric on driver side, two-step cab entry, 2 remote keys, central locking system, light sensor, rain sensor, economy/power drive modes. G 90-6/6.70-0.73 gearbox, Mercedes PowerShift 3, tubeless tyres 265/70 R 19.5 front axle, axle configuration 4x2, 12-tonne variant, rear air suspension. 10.4 cm instrument cluster, digital tachograph (2nd generation, VDO, ADR), working time parameterization when ignition off. 2-way speaker system, Fleetboard Eco Support, radio with USB and Bluetooth, pre-installation for Truck Data Center 7, CB radio prep (12V, DIN slot), pre-installation for toll collection, 180 l plastic fuel tank left, AdBlue tank 35 l, lockable tanks, protection cap for AdBlue dosing system. Exhaust system mounted right frame, end pipe facing inward. Lighting as per UN-R 48.06, daytime running lights, halogen fog lamps, flashing side marker lights, noise encapsulation according to ECE. Engine OM934, inline 4, 5.1 l, 170 kW (231 hp), 900 Nm, Euro VI E engine version, high-performance engine brake, CLCS TL function integration in ASAM, tail lift pre-installation, Atego parabolic front springs 5.1 t, wheel nut covers, steep shoulder rims 6.75 x 19.5. Electronic Stability Program (ESP), Lane Keeping Assist, Active Brake Assist, driver airbag, speed limiter 90 km/h / 56 mph (ECE), cruise control. Weight variant 11.99 t (4.9/8.1), control codes: EBS (4th gen), CAN star points classic, Global AdBlue Sensor (GMS DEF), 2nd generation electronics architecture, new Atego distributor, model series 1, minimum specification platform/box trucks, dry freight box body type. Maintenance documentation, registration certificate part II prepared, Mercedes-Benz OnRoadService, 4-cylinder inline OM934 engine, Valeo clutch, left-hand drive, suitable for right-hand traffic. Special permit required for axle transfer, aluminum battery lines. Permissible...

Condition: used, mileage: 238,189 km, power: 175 kW (237.93 HP), axle configuration: 4x2, color: green, driver cabin: day cab, gearing type: automatic, suspension: air, loading space length: 73,700 mm, loading space width: 24,900 mm, loading space height: 23,800 mm, Year of construction: 2021, Equipment: ABS, EBS, air conditioning, For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Crsdpfxey H Utxj Ad Nob Mercedes-Benz Actros 1824 L 4x2 box truck with tail lift Tail lift: Palfinger MBB C 2000 S (2,000 kg lifting capacity) Axle, wheel track (narrow), front axle 7.5 t, front axle with offset design, rear axle hypoid, crown wheel 440, 13.0 t, axle ratio i = 4.300, electronic braking system with ABS and ASR, heater, electronic air supply unit, electronic air supply and control, medium, disc brakes on front and rear axle, electronic parking brake, condensate monitoring for air system, steel air reservoir, trailer brake, 2-line system, Trailer Stability Assist (TSA), wheelbase 5,500 mm, rear overhang 2,400 mm, fastening parts for platform, single-circuit steering, non-regulated power steering pump, front axle stabilizer, aluminum front underride guard (ECE), battery carrier, side-by-side batteries, fender for chassis transfer, spray protection (EU) at front, rear underride guard (ECE) removed, steering oil cooling, smoker package, compressed air connection in cab, comfort driver's air-suspension seat, co-driver's functional seat, velour seat covers, driver's side sunblind (side), air conditioning, residual heat utilization, storage compartment covers for driver and passenger side, high storage on engine tunnel, roof hatch/ventilation flap, battery sensor (Hella), Exide batteries 2 x 12 V/170 Ah, low-maintenance, alternator 28 V/100 A, 24 V/15 A socket in co-driver footwell, additional features for bodybuilder, switch No. 1 for body electrics, night driving light switch, 24 V 15-pin trailer socket, reversing alarm, remote cable control for air suspension, pre-installation for tail lift control, side module, N3 vehicle, mirror blind, road vehicle, M-ClassicSpace cab, 2.30 m wide, 320 mm tunnel, comfort cab suspension (steel sprung), mechanical-hydraulic cab tilting, solid cab rear wall (no window), external storage hatch (left), lockable air deflector, external transparent sun visor, A-pillar cover, tinted front windscreen, heated front mirror, steel bumper corners, towing eyes in center bumper, fixed cab entrance steps left/right, central locking system with comfort locking, light and rain sensor, economy/power driving programs, transmission crossmember optimized for body mounting, Predictive Powertrain Control, gearbox G 140-8/9.30-0.79, single-plate clutch, Mercedes PowerShift 3, tubeless tires 315/70 R 22.5 (front/rear), rear axle air suspension, 2nd generation digital tachograph, ADR, VDO tachograph, working time parameterization when ignition off, 2-way loudspeaker system, navigation system, interactive multimedia cockpit, pre-installation for Truck Data Center 7, pre-installation for CB radio, 12 V DIN slot, pre-installed for toll collection, pre-installation/wiring and display for up to 4 cameras, Truck Data Center not included, main fuel tank right, 60 l AdBlue tank left, 500 l fuel tank right (650 x 565 x 1600 mm, aluminum), lockable tanks, AdBlue dosing system protective cap, exhaust system mounted to right frame, end pipe to inside, lighting per UN-R 48.06, fog lights, LED daytime running lights, flashing side marker lights, bottom cover to reduce dust swirl, noise regulation per UN-R 51.03 stage 2, engine OM936, inline 6, 7.7 l, 175 kW (238 hp), 1,000 Nm, Euro VI D engine specification, high performance engine...

Condition: used, Year of construction: 2011, operating hours: 1,878 h, machine/vehicle number: LC622, Used Tetraa Pak AB straw applicator 2011Technical Specifications & Performance DataThe Tetra Pak Straw Applicator 30 is a dedicated packaging machine engineered to apply individual drinking straws to carton packs with precision and consistency. Built by Tetra Pak Packaging Solutions AB, this unit is well suited for integration into beverage production and industrial packaging lines handling carton packages. As a second hand asset with low recorded operating hours, it provides a reliable, cost-effective option for upgrading or expanding a used bottling line or carton packaging setup.Machine type: Straw Applicator 30Manufacturer: Tetra Pak Packaging Solutions ABModel: 30Year of manufacture: 2011Format: Tetra classic aseptic (Tetrahedral)PLC: based with HMI operator panelCE marking: YesOperating hours (hour meter): 1,878.6 hDrawing specification: 86335D-300Container compatibility: Carton packagesPrimary function: Automated application of individual straws to preformed, filled, and wrapped cartonsProduction speed: Dependent on pack format and line speedAdvanced Automation & Control SystemsDesigned for dependable operation in demanding packaging environments, the Straw Applicator 30 features an industrial control architecture with operator-friendly HMI for set-up, monitoring, and diagnostics. Automated detection and verification functions help ensure that each straw is correctly picked, positioned, and affixed to the passing carton, supporting high-quality output and reducing rework.PLC-based control with HMI for recipe management and status visualizationIntegrated sensors for straw presence and placement verificationAlarms and fault diagnostics to support rapid troubleshootingQuick-change parts to facilitate format adjustmentsCE-compliant guarding and interlocksProduction Line Integration CapabilitiesThis machine is intended to run inline with carton filling and downstream packaging systems. It synchronizes with upstream carton conveyors and downstream bundling or case packing equipment to maintain smooth product flow and overall efficiency.Inline integration with carton fillers and conveyorsInterface-ready for upstream/downstream signal exchangeFormat change flexibility for multiple carton sizes and straw typesSuitable for beverage production environments focused on carton packagingMachine Condition & Maintenance HistoryThe unit presents as a well-preserved, second hand machine with low operating hours indicated by the onboard hour meter. CE marking and reputable OEM engineering support ongoing reliability in industrial applications. Preventive maintenance and spare part support should follow Tetra Pak guidelines to preserve uptime and performance.Operational status: Ready for operationLow-hour profile supports extended service potentialO... Crjdey Iz Tzopfx Ad Njb

Condition: used, machine/vehicle number: LC596, Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labelerConveying/accumulation: MBF accumulation table (conveyor)Case handling (option set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizerCase handling (option set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserterAuxiliary equipment: PREO E0P051 4R2 hotmelt units, Ber PDC 30 carton scaleSelected component years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30)Certifications: CE markings on Mas Pack modulesAdvanced Automation & Control SystemsThe line combines automated capsule application, adhesive labeling with multi-station control, and end-of-line carton forming, gluing, and packing. Modules feature integrated safety circuits and CE-compliant controls. Hotmelt application is handled by PREO melters for reliable carton sealing. Quick adjustments across labeling stations and format handling enable efficient changeovers within glass bottle families.Adhesive labeling with 3-station control for front/back/neck labelsAutomated heat-shrink and polylaminate capsule applicationHotmelt application via PREO E0P051 4R2 unitsCE-compliant electrical panels on Mas Pack packaging modulesOperator-friendly HMI/controls at packaging stations (per module)Production Line Integration CapabilitiesDesigned for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyorized accumulation table assists with buffer management for steady flow between wet and dry ends. The end-of-line can be configured with either Bortolin & Kemo or Mas Pack equipment to match site preferences and spare parts policy.Inline glass bottle processing from filtration to palletizingFo.. Credpfoyhbhqex Ad Nsb

Condition: used, functionality: fully functional, mileage: 396,911 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Crodpfxey Ndk Se Ad Njb Foglamps, halogen. LED daytime running lamps.

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! Year of Manufacture: 2018 Capacities / Travels: Longitudinal (X): 6,000 mm Vertical (Y): 3,200 mm Cross (Z): 1,500 mm Table Size: Length: 6,000 mm Width: 2,500 mm T-slot width: 22H12 mm Distance between T-slots: 250 mm Paintwork: RAL 7021 (black grey) RAL 7035 (light grey) NCS S 3560 R80B (DanobatGroup blue) Tool holder: ISO 50, DIN 69871 AD Main Drive: Type: Water-cooled inline motor Motor Power: 100% duty cycle, 43 kW Speed Control: Infinitely variable via water-cooled inline motor with star/delta switching Spindle Speed Range: Spindle speed: 20-7,000 rpm Torque at 37 kW/S1: 900 Nm (1,045/S6) Max. feed force: X, Y, and Z axes: 20,000 N Max. rapid traverse speed: X, Y, and Z axes: 35,000 mm/min Weight: approx. 44,500 kg Credeyu Swcjpfx Ad Nob STANDARD EQUIPMENT: Heidenhain CNC control TNC640 Automatic milling head, diagonal (infinitely variable) Automatic tool changer (40 positions) Chip conveyor Coolant system with 20 bar & internal coolant supply (IKZ) NC rotary table preparation Confirmation for deep hole drilling RepairFIT is our proven solution for a profitable entry into our product lines. Machines available in this line are sourced through a rigorous selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified faults or defects are professionally repaired by our expert service team.

Condition: used, Year of construction: 2004, Machine Type: Vertical Machining Center (VMC) Travels X-axis: 1,270 mm (50") Y-axis: 508 mm (20") Z-axis: 635 mm (25") Table Table size: 1,321 × 495 mm (52" × 19.5") Max table load: 1,587 kg (3,500 lbs) T-slots: 5 slots, 16 mm Spindle Spindle taper: CAT 40 / BT40 Spindle speed: 8,100 rpm (optional 12,000 rpm) Spindle motor: 30 hp (22.4 kW) vector drive Drive type: Inline direct-drive Coolant Through Spindle (TSC): 300 psi (21 bar) standard for TSC version Tool Changer Automatic Tool Changer: 40 tools (side-mount ATC) Tool change time: ~2.8 sec (tool-to-tool) Crodpfx Adeyfmtts Njb Max tool weight: 5.4 kg (12 lbs) Feedrates Rapid traverse: 25.4 m/min (1,000 ipm) Cutting feed: up to 16.5 m/min (650 ipm) Accuracy Positioning accuracy: ±0.005 mm Repeatability: ±0.0025 mm Control Control system: Haas CNC Control Memory: 1 GB Networking: Ethernet / USB Dimensions & Weight Machine weight: approx. 7,100 kg Footprint: approx. 4.1 × 2.8 m Height: approx. 3.1 m Electrical Power requirement: 208–240 / 360–480 V, 3-phase Air requirement: 6.9 bar (100 psi)

Condition: good (used), Year of construction: 2017, Ricoh Pro C9110 (HEIDELBERG) Year of Installation: 28/02/2017 Counter Readings: • Full Color: 6,018,662 impressions • Black & White: 3,510,065 impressions Crsdpfx Adey Idmwe Neb _____ Configuration • Ricoh Pro C9110 Digital Press • Feeding and stacking system • Integrated control panel • Including Plockmatic 350 finishing system _____ Technical Data • Printing Technology: Advanced laser system • Resolution: up to 1200 x 4800 dpi • Paper range: approx. 52–350 gsm • Wide media flexibility (coated/uncoated/special media) • Duplex printing • Production speed up to approx. 110 ppm _____ Finishing (Plockmatic 350) • Inline booklet production • Stitching and folding • Trimming unit • Professional finishing for short- and medium-run jobs _____ Condition • Well maintained • Fully operational • Can be demonstrated upon request _____

Condition: good (used), Ricoh Pro C9110 (HEIDELBERG) Year of Installation: 28/02/2017 Counter Readings: • Full Color: 6,018,662 impressions Crjdoy Idk Njpfx Ad Nsb • Black & White: 3,510,065 impressions _____ Configuration • Ricoh Pro C9110 Digital Press • Feeding and stacking system • Integrated control panel • Including Plockmatic 350 finishing system _____ Technical Data • Printing Technology: Advanced laser system • Resolution: up to 1200 x 4800 dpi • Paper range: approx. 52–350 gsm • Wide media flexibility (coated/uncoated/special media) • Duplex printing • Production speed up to approx. 110 ppm _____ Finishing (Plockmatic 350) • Inline booklet production • Stitching and folding • Trimming unit • Professional finishing for short- and medium-run jobs _____ Condition • Well maintained • Fully operational • Can be demonstrated upon request _____

Condition: new, For sale: high-quality centrifugal pump from renowned German manufacturer KSB, model ETALINE SYT ETL050-050-160, complete with electric motor. The unit is brand new, unused, stored as warehouse spare stock in its original transport crate. TECHNICAL DATA Manufacturer: KSB Model: ETALINE SYT ETL050-050-160 Pump type: Inline centrifugal pump Capacity Q: 40 m3/h Head H: 42 m Rotational speed: approx. 3493 rpm Cjdpeywvnlofx Ad Norb Impeller diameter: 153 mm Year of manufacture: 2020 Casing material: EN GJS 400 15 Flanged connections: DN50 MOTOR Manufacturer: WEG Power: 7.5 kW Supply voltage: 400 V Frequency: 50 Hz Speed: approx. 2900 rpm Efficiency class: IE3 Protection rating: IP55 CONDITION New, unused Original transport crate Complete KSB documentation Possible minimal storage marks APPLICATIONS Industrial installations HVAC systems Heating and cooling installations Water and liquid circulation Pumping stations

Condition: used, mileage: 85,805 km, power: 353 kW (479.95 HP), first registration: 06/2019, fuel type: diesel, empty load weight: 9,000 kg, maximum load weight: 17,000 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,250 mm, fuel: diesel, brakes: engine braking, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Year of construction: 2019, Equipment: ABS, additional headlights, air conditioning, airbag, cabin, compressed air brake, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, * Very rare, heavy-duty concrete mixer tractor unit with concrete hydraulics * Multiple concrete mixer trailer units in stock, ranging from €9,900 to €14,900 Crjdpfx Ajxdcwqed Nsb * Only 85,805 km original mileage * Cab: L ClassicSpace with one bed and two seats * Condition: see photos * Air conditioning * Cool box / refrigerator * Bi-Xenon headlights * Axle load measuring system * Liftable trailing axle * Mechanically adjustable heavy-duty Jost fifth wheel coupling * 12-speed gearbox - Type: G 330-12 / Mercedes-Benz PowerShift transmission * Driver assistance system: Adaptive cruise control * Driver assistance system: Attention Assist (drowsiness detection sensor) * Driver assistance system: Brake Assist (Active Brake Assist) * Driver assistance system: Lane Keeping Assist * Driver assistance system: Electronic Stability Program * Blind spot monitoring * Alloy wheels * Cruise control * Audio system: CD radio (Bluetooth) * Mounting plate / 40 mm fifth wheel plate * Light and rain sensor * Power windows * Fog lights with LED daytime running lights * Central locking with remote control * Comfort lock system * Driver airbag * Rear axle differential lock * Preparation / switch for lift axle on trailer/semi-trailer * Seats in cab: Driver’s air-sprung comfort seat * Seats in cab: multifunction passenger seat * Manual steel roof hatch * Suspension: leaf/air suspension * Engine: 12.8 L – 350 kW inline 6-cylinder diesel (OM 471) * Compressed air connection in cab * Drawers under dashboard * 24V power socket in cab * Thermal insulation * Work lights * Exhaust outlet down to the right * Exterior mirrors electrically adjustable and heated * Electronic brake system (EPB) with ABS + ASR * Air horn * Tinted windscreen * Variable steering assist pump * Enhanced engine brake * Disc brakes on front and rear axles * Headlight cleaning system * Additional water heating * External compartment left * Regulated water pump * CB radio If a new TÜV (MOT) inspection is required, we will gladly provide a quotation from our partner workshops. Our offer generally excludes new TÜV certification, DGUV inspection, safety test (SP), and UVV testing. More trucks available on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misunderstandings regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is responsible for independently verifying the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: new, mileage: 1 km, power: 290 kW (394.29 HP), fuel type: diesel, tire size: 14.00 R 20, axle configuration: 6x6, wheelbase: 5,100 mm, fuel: diesel, fuel tank capacity: 390 l, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, Year of construction: 2025, Equipment: ABS, air conditioning, - Radio/cassette player - Spare wheel - Sun visor flap - Power take-off (PTO) Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck, ideal for personnel and cargo transport in challenging conditions. Its 394 HP engine and 6x6 all-wheel drive deliver outstanding performance in difficult terrain. The versatile cargo bed with foldable benches and twistlocks is perfectly suited for troop movement or container logistics. This vehicle provides dependable reliability for demanding off-road operations and deployments. Technical data Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for maximum off-road traction. - Permissible gross vehicle weight (GVW): 27 tonnes, suitable for heavy-duty transport. - Axle configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential locks. - Suspension: Reinforced 3-leaf parabolic spring on front axle (8.0 t) and rear axles (2 x 13.0 t). - Wheelbase: 5,100 mm for stability and maneuverability. - Engine: 12.8-litre inline 6-cylinder OM460 Euro III, 394 HP (290 kW), 1,900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and distribution gearbox VG 3000-3W. - Tyres: 365/85 R 20, optimised for off-road use. Cargo bed features: - Dimensions: length 7,000 mm, width 2,550 mm, internal height 2,000 mm. - Floor: Anti-slip checker plate steel floor (3/5 mm, S235JR) with 10 lashing eyes. - Side walls: Foldable, removable side walls and tailgate, optionally usable as flatrack. - Twistlocks: 4 units for ISO 20-foot containers. - Benches: Foldable benches for 30 persons, 415 mm per seat. - Roof and tarpaulin: Steel hoops with waterproof PVC tarpaulin (630 g/m², UV-resistant), colour to RAL white. - Extras: Foldable access steps, rubber buffers, spray protection with stone guard. Included accessories: - Lockable toolbox attached to chassis. - Holders for water and fuel canisters. - Spare wheel carrier with manual cable winch. Paintwork: - Epoxy primer, sandblasting (SA 2½), wax sealant, RAL shade white. Outstanding performance: - Versatility: Flexible for personnel, freight, or container transport. - Robustness: Solid steel construction for off-road deployment. - Efficiency: Quick adaptation of the cargo bed without tools. - Reliability: Reinforced suspension and powerful engine. Credpfx Adexnbwdj Nob Areas of operation: - Military: Personnel and equipment logistics. - Logistics: Transport in remote areas. - Container logistics: ISO 20-foot container transport. Additional options: - Lockable fuel caps, tank underride protection. - LED lighting, first-aid kit, warning triangle, 6-kg fire extinguisher. Powerful in the toughest conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in rough terrain and challenging logistics missions — the ideal solution for heavy-duty transport tasks. Availability: 4 units available from September 2025. Images will be updated upon arrival. Contact: or General information Year of manufacture: 2025 Technical information Number of cylinders: 6 Engine displacement: 12,800 cc GVW: 27,000 kg Transmission Gearbox: PowerShift 3, 16-speed, automatic...

Condition: used, functionality: fully functional, Year of construction: 1988, 1 Unit Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Manufacture: 1988 Output: approx. 55 m³/h (compact concrete at 30 sec. mixing time) Aggregate Storage 4-compartment inline silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 Equipped with moisture probe / moisture measurement system Weighing / Dosing System Aggregates via weighing conveyor: max. 2,500 kg Cement scale: 250 kg Water scale: 250 liters Csdey Hia Tspfx Ad Njrb Cement Silos 3 × 60 tons – Manufacturer: Kurz 1 × 60 tons – Manufacturer unknown Control System Gedis Operator Station-Control container Additional Equipment Partial enclosure included Admixture container included Available immediately Location: Ludwigslust / Northern Germany Offer is net, ex works (EXW) from current location Subject to prior sale Errors and/or misstatements excepted Sold as seen, without warranty or guarantee - Any reproduction, reuse, publication, or copying of this offer, in whole or in part, is strictly prohibited.

Condition: used, functionality: fully functional, mileage: 252,801 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cedpsy Ivz Tsfx Ad Norb Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: used, functionality: fully functional, mileage: 304,100 km, power: 331 kW (450.03 HP), first registration: 07/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Crjdpoy Ivzyofx Ad Nob Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam