Used Lithec Lithoflash Inline Hbdm Xl75 for sale (565)

Condition: used, Year of construction: 2007, operating hours: 3,339 h, machine/vehicle number: LC615, Used ELOPAK sks-s60S shikoku filling lineTechnical Specifications & Performance DataThis aseptic gable-top carton filling machine is engineered for high-integrity beverage packaging, delivering reliable performance for long-life products. Manufactured by Shikoku Kakoki in 2007, it operates with low accumulated hours and supports multiple carton formats for flexible production planning in industrial packaging and beverage production environments.Manufacturer: Elopak Shikoku KakokiModel: SKS-S60SYear of manufacture: 2007Operating hours: 3339Filling mode: AsepticContainer type: Gable-top cartonsCompatible formats: 0.5L, 0.75L, 1.0LElectrical supply: 400 V, 50 Hz, 3-phaseCurrent draw: 114 ACompressed air pressure: 550–990 kPaAir consumption: 2460 NL/minAdvanced Automation & Control SystemsDesigned for aseptic operation, this machine supports precision filling in a controlled sterile environment. Its three-phase industrial electrical configuration ensures stable operation and straightforward integration with plant utilities. Format changeovers across 0.5L, 0.75L, and 1.0L cartons are engineered to be efficient, helping reduce downtime and improve overall equipment effectiveness in second hand or refurbished installations.Industrial-grade controls for consistent aseptic performanceProcess parameters optimized for sterile packaging operationsOperator-friendly interface for setup and monitoringInterlocked access points and safety circuits for protected operationProduction Line Integration CapabilitiesThis aseptic carton filler integrates seamlessly within a used bottling line or new packaging configuration. It is well-suited for pairing with upstream carton preparation or sterilization modules and downstream cap closing, date coding, case packing, and palletizing equipment. The machine supports inline or standalone operation depending on plant layout.Interfaces with conveyors and downstream packaging machineryFlexible line positioning for greenfield or retrofit projectsMulti-format capability for 0.5L, 0.75L, 1.0L cartonsMachine Condition & Maintenance HistoryWith only 3339 operating hours, this second hand aseptic filler presents low wear relative to typical lifecycle expectations for industrial packaging equipment. Its configuration and utilities align with common European plant standards, supporting rapid recommissioning by qualified technicians.Low operating hours indicating limited duty cycleWell-preserved aseptic configurationOperational Performance & VersatilityOptimized for aseptic beverage production, the machine is ideal for long-shelf-life products commonly packaged in gable-top cartons. Its multi-format capability enables agile product scheduling and SKU changes without extensive retooling.Aseptic filling for extended shelf lifeSupports standard gable... Nwjdpfeyz R E Tex Ag Dof

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Nwsdpfxsu Utzys Ag Djf Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: Nedpfx Agoyug R Rs Djwf • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: used, mileage: 160 km, power: 315 kW (428.28 HP), first registration: 07/2025, fuel type: diesel, maximum load weight: 25,999 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,300 mm, color: violet, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, Year of construction: 2022, Equipment: air conditioning, cruise control, navigation system, onboard computer, parking heater, trailer coupling, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is indicated, it is based on the current exchange rate. The vehicle location's currency is binding. Waste heat recovery, engine OM470, inline 6-cylinder, 10.7 l, 315 kW (428 hp), 2100 Nm, Predictive Powertrain Control, front axle 8.0 t, trailing axle 7.5 t, steered, unloadable, liftable, electronically controlled parking brake, wheelbase 4300 mm, ADR Type Class FL, including EX/II, EX/III, and AT, 290 l aluminum tank, 60 l AdBlue tank, trailer hitch, L-cab, cab width 2.30 m, automatic climate control, auxiliary hot water heating, circuit breakers, hill start assist, reversing warning system, illuminated Mercedes star, rain sensor, alarm system with interior monitoring, bi-xenon headlights, fog lights, LED rear lights, headlamp cleaning system, lane keeping assistant, distance assistant, attention assistant, traffic sign assistant, cruise control, navigation system, ADR Type Class FL, including EX/II, EX/III, and AT. Nodpfxoyzu Hnj Ag Djwf

Condition: good (used), mileage: 361,156 km, power: 260 kW (353.50 HP), first registration: 06/2018, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, Year of construction: 2018, Equipment: AdBlue, Bluetooth, EBS, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, trailer coupling, - Aluminum fuel tank - Brake booster - EPS (Electronic Power Steering) Nwjdpfxjyyddmo Ag Djf - Low noise - Tipping hydraulics - Particulate filter - Radio/CD player - Reversing camera - Sunroof - Sleeper cab - Side door - Toolbox Front axle: Steered; Suspension: Leaf suspension Rear axle: Suspension: Air suspension Unladen weight: 10,150 kg Payload: 7,850 kg Gross vehicle weight (GVW): 18,000 kg APK (Main technical inspection): valid until 07/2026 Technical condition: good Visual condition: good No liability for printing or typographical errors, subject to change, prior sale, and errors! Vehicle number: 115 Mercedes Benz Antos 1835 / 4x2 / Meiller AK 12MT with remote control / 361 Tkm VIN: WDB96300310267671 German vehicle TÜV: 01/2027 - Safety Inspection: 07/2027 Suspension: Leaf/Air Transmission: Automatic Stationary air conditioning Engine brake Cruise control Navigation system Distance control assistant Lane keeping assistant Reversing camera Euro 6 Skip loader Meiller: AK 12MT Year of manufacture: 2018 With remote control Special equipment: Driver airbag, Audio system: CD radio (Bluetooth), Exhaust pipe raised behind cab, Right external mirror with maneuvering position, Compressed air connection in cab, Driver assistance system: Attention Assist (drowsiness detection sensor), Suspension: front springs 7.5 t, 1 leaf, Transmission 12-speed - Type: G 211-12, LED rear lights, Information display 12.7 cm with video function, Fuel tank: 390 L aluminum, Reinforced engine brake, PTO MB 124-10c, Parameterizable special module, Frame lowering without airbag residual pressure control, Circuit breaker, Cab seats: driver's seat air-suspended comfort, Exterior sun visor, Additional stabilizer, Rear/Trailing axle, Extra 24V socket in passenger footwell, Gearbox oil cooler Additional equipment: Emission standard EURO 6, Axle configuration: 4x2, Front axle load 7.5 t, Trailer brake 2-line, Left connections, 24V / 15-pin trailer socket, Antos, Exterior mirrors electrically adjustable and heated, 170 Ah battery, Rear axle differential lock, Steel air tank, Medium air unit, Driver assistance system: Active Brake Assist, Driver assistance system: Lane keeping assist, Cab: Width 2.30 m, Cab: Hydraulic tilting mechanism, Cab: M ClassicSpace, Cab: steel-sprung, standard, Cab: reinforced (Sweden), Cab floor with engine tunnel 320 mm, Suspension: leaf/air, Electric window lifters, Tinted windscreen, 100 A alternator, Urea tank (AdBlue): 60 L, Manual pop-up roof (steel), Rear axle gear 440, Body/chassis: chassis, Comfort central locking, Unregulated power steering pump, Front air intake, Engine 7.7 L - 260 kW inline-6 diesel (OM 936), Engine compartment encapsulation, Ramp mirror, Spare wheel, Residual heat utilization, Disc brakes front and rear, Seat upholstery/trim: fabric, Cab seats: passenger comfort seat, Mudguard front, Front axle stabilizer, Cab socket 24V, Tachograph / EC control unit, Aerodynamically shaped underbody paneling, Front underride guard, Toll collection preparation, Offset front axle, Permissible total weight: 18.00 t No liability for printing or typographical errors, subject to change, prior sale and errors! No liability for printing or typographical errors, subject to change,...

Condition: used, functionality: fully functional, mileage: 257,039 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Nwjdsyz Tqfjpfx Ag Dof Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: used, functionality: fully functional, mileage: 408,054 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Nwodpfxsyz Tpze Ag Dof Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps.

Condition: used, functionality: fully functional, mileage: 398,842 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Nedjyz Tpbepfx Ag Dswf Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps.

Condition: used, mileage: 571,610 km, power: 290 kW (394.29 HP), first registration: 12/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro6, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 2,450 mm, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * Special equipment: Rohr fresh goods box body * Cooling unit: Carrier Easy Cold Supra 850 with 4,250 operating hours/hour meter, temperature recorder * Power connection for electric cooling * Tail lift by BÄR, 2.5 t, 2,450 mm, aluminum platform * Turn-assist camera * Reversing camera * Automatic traction chains on rear axle as traction aid * Fully air-suspended chassis * Deep coupling system * Front axle: 8.0 t * Audio system: CD radio * Exhaust outlet downwards right * Brake connection standard and DuoMatic * Compressed air connection in cab * Aluminum air reservoir Njdpfx Aeyza Hyeg Dswf * Reinforced engine brake * Steerable and liftable trailing axle * Fleet management system interface * Cab seats: driver's seat air-suspended comfort seat * External sun visor * Sunblind for side window, driver's door * 12V socket in passenger footwell * Additional 24V socket in passenger footwell * Preparation for 2nd control unit for level regulation Additional equipment: * Emission standard EURO 6C * Axle configuration: 6x2/4 * Actros 4 * Trailer brake 2-line, connections left * Trailer socket 24V / 15-pin * Exterior mirrors electrically adjustable and heated * Rear axle differential lock * Driver assistance system: Attention-Assist (fatigue detection sensor) * Driver assistance system: Brake Assist (Active Brake-Assist) * Driver assistance system: Lane Keeping Assist * Cab: width 2.30 m, Cab: L * Cab: steel-sprung, comfort * Cab floor with 320 mm engine tunnel * Suspension: air / air (full air suspension) * Electric windows * Tinted windshield * Transmission: 12-speed - Type: G 211-12, PowerShift * (AdBlue): 60 liters * Manual roof hatch (steel) * Lower comfort bed, central locking system * Communication interface * Fuel tank: 630 liters aluminum * 2-stage air compressor * Engine: 10.7 liters - 290 kW inline 6 diesel (OM 470) * Engine compartment encapsulation * Residual heat utilization * Disc brakes front and rear axle * Voltage converter 24V/12V 10 A * Front axle stabilizer * Additional stabilizer, rear axle/trailing axle * External storage compartment, left * Cab socket 24V * Tachograph / EC control device * CB radio preparation * Toll collection preparation * Auxiliary heater (water) * Additionally, we offer the Rohr trailer, first registration 12/2018, type RZAK/18, for sale at a net price of €10,000 plus VAT. * Dimensions: 7,360 x 2,450 x 2,450 mm * Through-loading capability (pneumatic open and close) * Tail lift by BÄR, 2.5 t, 2,350 mm, aluminum platform * Cooling unit: Carrier Supra 850U with 3,640 operating hours * Mileage: 467,050 km * Temperature recorder * Night socket * Disc brakes * Extendable drawbar * Payload: 10,980 kg * Unladen weight: 7,020 kg * Gross vehicle weight: 18,000 kg * Errors, changes, and prior sale excepted

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: SN070, paper weight (min.): 135 g/m², paper weight (max.): 450 g/m², paper width (min.): 210 mm, paper width (max.): 364 mm, paper height (min.): 297 mm, paper height (max.): 750 mm, total length: 4,020 mm, total width: 1,200 mm, total height: 1,800 mm, space requirement length: 4,020 mm, space requirement width: 1,200 mm, space requirement height: 1,800 mm, type of input current: AC, input current: 40 A, input voltage: 240 V, Equipment: documentation/manual, We are offering this used MGI JETVARNISH 3D One digital printing machine, year of manufacture 2019. Voltage: 220–240 V Frequency: 50–60 Hz Short-circuit current rating (SCCR): 10 kA Current: 2×20 A Model: JETVARNISH 3D One Serial number: JVD1-070 Date of manufacture: 12.2019 Year of construction: 2019 Note: We do not provide any warranty for this machine, it is sold as shown in the pictures provided. The machine was stored packaged in a warehouse for two years due to restructuring. Configuration: KONICA MINOLTA PRINTHEADS - Exclusive MGI inkjet technology - Line widths from 0.5 mm possible INTEGRATED INLINE DRYING - On-the-fly drying and curing via integrated LED UV dryers Nwjdpfxjyypcno Ag Djf - No additional drying time required - Low energy consumption PAPER DELIVERY - Automatic stacking of prints onto pallets - Minimum format A4 - Maximum format 36.4 x 75 cm DIGITAL ADVANTAGES - Ideal for profitable small and medium print runs - Fast setup - No plates or screens required - Digital varnish form (tiff) required as 5th color - Wide range of substrates possible VARNISHING ON DIGITAL AND OFFSET PRINT SHEETS - Spot varnish directly onto toner (no lamination required for most toners) - Varnishing over offset prints or laminated sheets - Accurate registration by AIS scanner, no register marks needed - Fast and easy digital production - Maximum varnishable area per sheet: 35 x 74 cm VARIABLE VARNISH THICKNESS - Adjustable to individual customer requirements - Maximum 3D effect: 116 μm - Minimum thickness (on laminated surfaces): 21 μm - Minimum thickness (directly on toner): 21 μm SOFTWARE SUITE - On-the-fly job management - Reprint functionality - Image editor - Library of different patterns - Intuitive operation - Time and cost saving OPTICAL SHEET CONTROL - Artificial Intelligence Smart Scanner - Precise registration - Sheet skew and misalignment correction - 300 individual reference points per sheet - Individual correction for each sheet - No marks needed (if contrast is sufficient) - Fast, straightforward setup MEDIA HANDLING - Paper weights from 135 gsm up to 450 gsm - UV spot varnishing directly on digital prints without prior - Full surface varnishing or lamination (not with all toners) ENVIRONMENTALLY FRIENDLY - Varnish in closed loop system - No cleaning required between jobs - No wastage between jobs - Reduced paper, varnish, and energy consumption DIMENSIONS - 4.02 x 1.2 x 1.8 m (L x W x H) - 1 meter clearance required on all four sides - Weight approx. 1,200 kg ELECTRICAL DATA - 7.5 kW (32 A), operating temperature: 18 to 30°C - Relative humidity: 30 to 50% (non-condensing) Included: - Corona charging unit - Required for processing prints from various toner systems - VDP barcode scanner If you have any questions or require further information, please feel free to send us a message or call us. Note: We do not provide any warranty for this machine.

Year of construction: 2014, condition: used, For Sale: Proseal GT2V Vacuum Traysealer – Immediate Availability We are offering a Proseal GT2V Vacuum tray sealing machine, ideal for food & packaging production environments. This robust vacuum-capable tray sealer is ready for immediate use and built to deliver reliable performance in high-demand packaging applications. Tool size roughly; 220 x 145 Machine Highlights: ✔ Industrial automatic tray sealing system designed for vacuum and vacuum gas sealing. ✔ Heavy-duty construction with food-industry hygiene standards. ✔ Suitable for a wide range of tray formats and lid materials – integrates into existing production lines. ✔ Proven Proseal reliability and long operational life. ✔ Machine is used but fully functional and inspected, located in Emmeloord, Netherlands. Specifications (based on Proseal tray sealer series): Nwodpfxjyc R Sze Ag Djf • Automatic inline tray sealing design with vacuum sealing capability. • Suitable for atmospheric, gas flush and vacuum/vacuum gas operations when equipped accordingly. • Heavy industrial frame, food safe and wash-down capable. (Exact detailed specs available on request.)

Condition: used, mileage: 350,000 km, power: 290 kW (394.29 HP), axle configuration: 4x2, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, - Braking system Nwedpfx Asyf Tt Tjg Def For vehicle inquiries, please contact Mr. Seidel (at Tel.). Mercedes-Benz Actros 1840 LSnRL 4x2 tractor unit Fifth-wheel plate, A0B axle, narrow wheel mounting track, A1A air-suspended front axle, A1D 8.0 t front axle, A1Z cranked front axle, A2E rear axle with 440 ring gear, hypoid, 13.0 t, A3D rear axle with active lubrication, non-regulated, A5A axle ratio i = 2.278, B1B electronic brake system with ABS and ASR, B2A disc brakes on front and rear axles, B2X electronic parking brake, B3H secondary water retarder, C0G frame overhang 1050 mm, C1W wheelbase 3700 mm, C7T integral tail, C8Z aerodynamic side trim, D0L smoker package, D0S compressed air connection in cab, D1C comfort driver suspension seat, D1N passenger functional seat, D3B comfort lower bed, D3Q velour seat upholstery, D6G automatic climate control, D6I residual heat utilization, D6M hot water auxiliary heater, cab, D8N electric tilting roof, E5H night drive switch, E6A 24 V 15-pin trailer socket, E7F cable remote control for air suspension, F0F side module, N3 vehicle, F1E L-cab StreamSpace, 2.30 m, 170 mm tunnel, F3C comfort air-suspended cab mounting, F5C air deflector without base panel, lockable, F5L external sun visor, transparent, F5Y A-pillar trim, F6C tinted windscreen, F6I heated front mirror, F6Q air horn, F6T MirrorCam, F6V chrome MirrorCam bracket, lower cover cab color, F8V light sensor, F8W rain sensor, G0K economy/power drive program, G0T Predictive Powertrain Control, G2B transmission G211-12/14.93-1.0, G5A single-disc clutch, G5G Mercedes PowerShift 3, H2C fifth wheel load +600 mm, I1Y tubeless tires, 295/55 R 22.5 rear axle, I2I tubeless tires, 355/50 R 22.5 front axle/front low axle/rear low axle, I6V air suspension, rear axle, lowliner, J2K 2-way speaker system, J3H on-board unit (OBU), installed and activated from factory, J3U requirement Fleetboard Manager App, J3V Truck Data Center 7, J6B multimedia cockpit, J8Y pre-installation for Truck Data Center 7, J9A pre-installation for CB radio, 12 V, DIN slot, J9D pre-installation for toll recording, K1E 390 l fuel tank, left, 650 x 565 x 1250 mm, aluminum, K3V 60 l AdBlue tank, left, K6C second 290 l tank, right, 650 x 565 x 950 mm, aluminum, K7D exhaust system, end pipe to right outside, L0A lighting regulation according to UN-R 48.06, L1A bi-xenon headlights, L1C LED daytime running lights, L1D automatic high/low beam and cornering light, L1H halogen fog lights, L2H side marker lights, flashing, L3A work lights, lower, L3Z headlamp cleaning system, M2Q OM470 engine, inline 6, 10.7l, 290 kW (394 HP), 1900 Nm, M5A 2nd generation OM470 engine, M5C Euro VI, D engine version, M5V high performance engine brake, O1S interior color almond beige, O1Y direct steering, O2N Melco 95P65 starter, O3C safety package, O7L chrome interior package, Q0W factory-installed fifth wheel coupling, Q4G fifth wheel height H = 140 mm, Q4W low-maintenance fifth wheel, Q5L fifth wheel with plate, Jost JSK 42MK, Q6F mounting plate included in fifth wheel, Q6Z fifth wheel angle with hole grid, R0Z wheel nut cover, R1Q 9.00 x 22.5 wedge drop center rims, R1T 11.75 x 22.5 wedge drop center rims, front axle, S1D Stability Control Assist (ESP), S1H Lane Keeping Assist, S1I Distance Assist, S1L Attention Assist, S1R Turn Assist, S1W Active Brake Assist 5, S3A driver airbag, S5Z cruise control, S6F permanently active Turn Assist, W0K weight variant 18.0 t (8.0/11.5), Y1X...

Condition: used, functionality: fully functional, mileage: 280,649 km, power: 331 kW (450.03 HP), first registration: 05/2024, fuel type: diesel, overall weight: 8,269 kg, axle configuration: 4x2, wheelbase: 385 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,800 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Powertrain Control (PPC). Cruise control. L-cab BigSpace, 2.50m, level floor. AGM-Batteries, 2 x 12 V/220 Ah, maintenance-free. Engine OM471, inline 6, 12.8 l, 330kW (449hp),2200 Nm. EURO 6. Automatic gearbox. Mercedes PowerShift 3. Transmission G211-12/14.93-1.0. High Performance Engine Brake. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Automatic climate control. Driver's suspension seat, comfort. Armrests on both sides, co-driver's seat. Luxury top bunk, narrow. Luxury bottom bunk. Auxiliary hot water heater, cab. Pull-out refrigerator, under lower bunk. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Stability Control Assist (ESP). Lane Keeping Assist. Active Brake Assist 5. Front axle tyres 315/70 R22.5. Rear axle tyres 315/70 R22.5. Drive axle ratio 2.41 Fifth-wheel coupling ex factory, standard, Jost JSK 37C. Height = 150 mm. Njdeyzdr Tepfx Ag Djwf Wheelbase 3850 mm, wheel arrangement 4x2. Tank 790l+120l AdBlue,left,735x700x2170,alu.,step. Lockable. Second tank, 430 l, right,735 x 700 x 1000 mm,alu. Lockable. Speed limiter, 80 km/h. Technology Truck Data Center 7. Interface for fleet management system FMS. Exterior LED main headlamps. Foglamps, halogen. LED daytime running lamps. MirrorCam

Condition: used, mileage: 149,811 km, power: 200 kW (271.92 HP), first registration: 04/2021, fuel type: diesel, overall weight: 16,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 45 m³, loading space length: 7,256 mm, loading space width: 2,508 mm, loading space height: 2,500 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * ATEGO 1527 L long cab flatbed/tarpaulin, 7.30 m, with portal doors * Sliding tarpaulin on both sides (right + left) * Vehicle number for customer inquiries: 4204 * Active Brake Assist * Air conditioning * L-cab ClassicSpace, 2.30 m, tunnel * Engine version EURO VI, D * Lane Keeping Assist * High Performance Engine Brake * Comfort lower bed * L-cab * Air suspension, rear axle * Rain / Light sensor * Stability Control Assist (ESP) * Auxiliary hot air heater, 2000 W * Electronic braking system with ABS and ASR * Driver's comfort air-sprung seat * Electric window lifters, both sides * Mercedes PowerShift 3 * Particle filter * Cruise control * AdBlue tank 25 l * Roof hatch/roof ventilation flap * Transmission G 140-8/9.30-0.79 * Weight version 16.0 t (6.1/10.5) Nsdpfx Agevz Nfms Djwf * Main mirror, electric, driver's side * Electr. compressed air supply heater * 180 l plastic tank, left side * Engine OM936, inline 6, 7.7 l, 200 kW (272 hp), 1100 Nm * Wheelbase 5360 mm * Tubeless tires, 305/70 R 19.5 front axle * Inline engine, 6 cylinders * Stabilizer under frame, rear axle * Front parabolic spring, 6.1 t * Preparation for toll collection * Second plastic tank 100 l, left side * Digital tachograph, 2nd generation * Environmental sticker (green) * Two-seater * Full service history * 2/3-door No liability for printing or typing errors. Sale only to commercial customers. Errors and prior sale reserved. Changes, prior sale, and errors expressly reserved. This description serves for vehicle identification only and is not a guarantee in the sense of sales law. Contract description is decisive. * TOP SERVICE & QUALITY * We can provide you with a leasing, financing, or hire-purchase offer Guarantee insurance available on request from insurer * TÜV / UVV tail lift / tachograph check and OBU installation by our local partners * 30-day export (customs) plates available All customs documents for export possible upon individual request * Toll-Collect registration can be arranged in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * * Alexander Pittas * Robin Pittas * WHATSAPP number * * ---- Visit our website at * Over 200 vehicles always in stock

Condition: used, Year of construction: 2015, operating hours: 3,944 h, Equipment: ABS, Top-condition Mercedes Benz Actros 1830 with Ruthmann T 330 HV 12 aerial work platform, 33 m working height, 320 kg load capacity or up to 3 persons, 20.70 m lateral outreach, with minimal stabilization, 1,000 V insulation possible, box body 1.60 m x 2.38 m x 1.10 m, lift and swivel lock, large aluminum work basket, newly UVV-inspected and serviced by Ruthmann, and much more. Platform Data Ruthmann T 330 HV 12 aerial work platform Max. working height: approx. 33 m (manufacturer spec) 4-fold hydraulic outriggers Minimal stabilization 20.70 m lateral outreach Load capacity: 320 kg or 3 persons Basket dimensions: 1.71 m (L) x 0.85 m (W) x 1.10 m (H) with power socket Insulation according to DIN VDE 0682-742 up to 1,000 V with fiberglass (GRP) work basket possible Permitted wind speed: 12.5 m/s Lateral force: 400 N Slew and swivel range: 2 x 250° 15° lift and 20° swivel lock Emergency controls on subframe Special boom lock prepared for subsequent installation of underrun protection at rear Quick-change system for fast replacement of work platforms Large tool storage box at rear of loading area, dimensions: 1.60 m x 2.38 m x 1.10 m, with side shutters 4 non-slip U-plates with holders Work platform spotlight 3,944 operating hours (according to meter) Platform UVV certificate newly issued by Ruthmann (09/2025) Ruthmann service newly carried out (09/2025) Registered as self-propelled work equipment (tax-exempt) Very well-maintained condition Truck Data First registration: 08.04.2015 Mileage: 108,250 km Cab: M CompactSpace with rear window Wheelbase: 4,200 mm Engine: OM936, inline 6-cylinder, 220 kW (299 hp), 1,200 Nm Euro VI engine version Drive: 4x2 Automatic transmission: Mercedes Benz PowerShift 3, G 140-8/9.30-0.79 Air conditioning Front and rear axles with leaf suspension Weight variant: 18.0 t (8.0/11.5) Front axle: 8.0 t, rear axle: 13.4 t planetary with 300 mm ring gear Front springs: 8.0 t, 3-leaf; rear springs: 11.5 t, heavy-duty Nwsdeyi N Stepfx Ag Def HY axle ratio: i = 4.833 Disc brakes front and rear Electronic brake system with ABS and ASR Cruise control Stability assist Stabilizers front and rear Reversing camera Navigation system LED daytime running lights LED warning light bar on cab roof 2 additional flashers at the front of cab roof Air horn on cab 290-liter tank Comfort driver's air-suspension seat Very good and well-maintained condition TÜV (MOT/roadworthiness) valid until 10/2025 Registered as self-propelled work equipment (tax-exempt) Price NET plus 19% VAT. Attractive financing options available on request. All information provided without guarantee. Subject to errors and prior sale. Internal vehicle number: 2567

Condition: excellent (used), functionality: fully functional, mileage: 724,990 km, power: 375 kW (509.86 HP), first registration: 10/2018, fuel type: diesel, overall weight: 18,000 kg, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of beds: 2, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, lane keeping assist, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, spoiler, tachograph, tire pressure monitoring, traction control, Mercedes-Benz Actros 1851 LS nRL F 13 BigSpace Standard Tractor Unit Engine: OM471, inline 6-cylinder, 12.8 L, 375 kW (510 hp), 2500 Nm Euro VI C (6) Mercedes PowerShift 3 automated transmission Retarder Full air suspension Air/Air suspension Differential lock SmartTacho GEN2 v2 ABS/EBS/ASR Bi-xenon headlights Electronic Stability Program (ESP) Radio/navigation system with Bluetooth, comfort features Lane keeping assist Cruise control with ACC Distance assistant ACC Attention assistant Active Brake Assist 4 Turning assistant CD radio, Bluetooth, comfort features Automatic climate control Stationary air conditioning Auxiliary hot-water heater, cab residual heat use Nodsyx Dfhepfx Ag Dewf Driver airbag 2x bed/sleeping bunks Cool box Safety Pack Classic Climate Pack L-cab BigSpace, 2.50 m, flat floor Rain/light sensor Wheelbase: 3700 mm Full spoiler kit Fuel tank: 390 L, left side, 650 x 565 x 1250 mm, aluminum Second tank: 290 L, right side, 650 x 565 x 950 mm, aluminum AdBlue tank: 60 L, left side Tyres: | 1st axle: 315/60 R22.5, tread depth 10 mm | 2nd axle: 295/55 R22.5, tread depth 8 mm

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turner * 2 tables with automatic Vario-Pin system * Teflon coating for pre-glued foil * Foil laying system for pin table (pre-glued foil) * Heating plate size: 2800 x 1500 mm * Max. workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil storage carousel, 3.2 m height with 14 hanging bars * PLC control: Siemens S7 * Control panel for Siemens TP 270 PLC (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW Njdpfx Agoxbcude Dowf * Max. chamber pressure: 6 bar * Max. pressing opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40/60 mm * Max. pressing force: 2400 kN * Operating pressure of hydraulic system: 320 bar

Condition: new, Year of construction: 2025, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,500 mm, (distance between machine columns 3,520 mm) Z= 1,500 mm Heidenhain control Water-cooled inline motor 43 kW / 900 Nm Automatically indexing milling head 6,000 min-1 / 2 planes, 90°|45° / 0.001° x 0.001° 3-sided protective housing Cable handwheel 2 x chip conveyor 60 tool changer Nedpoqrq Emofx Ag Dswf

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. Nsdpfx Aoyf E Tfsg Dswf This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Condition: excellent (used), functionality: fully functional, overall weight: 1,400 kg, Year of construction: 2016, operating hours: 360 h, KIMERA SRL KM 0010 Small MULTIMIX / Concrete Mixer / Large Version • Manufacturer: KIMERA SRL • Model: KM 0010 Small MULTIMIX • Year of manufacture: 2016 Nsdpfx Ageyxqf Ij Dowf • 360 operating hours • Maximum production output: 25 m³/h • Maximum batch size per cycle: 4 m³/h • Large configuration • Mobile concrete batching plant • Mobile complete system – ideal for transport by truck or trailer • Immediately ready for operation – no foundation required • Independent control unit with operator panel, USB port, start/stop/emergency stop • Premium grid covers & conveyor technology for material loading and mixing process • Safe and robust construction for jobsite environments • Suitable for dry and wet mix production directly at the jobsite • Efficient & precise – saves material and time through inline dosing • Total weight: 1,400 kg • Length: 600 cm • Width: 300 cm • Height: 300 cm • German machine • Immediately operational • This offer is non-binding and subject to change. - Prior sale reserved, - Errors and/or typographical mistakes excepted. - Sale subject to our General Terms and Conditions.

Condition: used, Year of construction: 2012, x-travel 550 mm y-travel 305 mm z-travel 460 mm table-size 820 x 320 mm tool adaptor BT 40 turning speed range 10000 U/min power requirement 11 kW Control Sinumerik Steuerung 828D rapid traverse Z-axis 1500 mm/min rapid traverse X- and Y-axis 1500 mm/min workpiece weight 300 kg no. of tools in the magazine 12 Stück dimensions 2164 x 1860 x 2200 mm weight of the machine ca. 2800 kg immediately available - Siemens Sinumerik control 828D with 15.6 inch touch display - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profile rail with roller recirculation in all axes for high payloads Nwsdpfx Aoywnvueg Dof - High-torque servo drives, directly connected to the ball screw in all three axes three axes - Precision-ground, preloaded high-performance recirculating ball screw (Ã? 40 mm x P16 x C3) for high rapid traverse speeds in all axes - Telescopic guideway cover on all three axes - Main spindle BT40 up to 10,000 min¯¹ with belt drive or up to 12,000 min¯¹ with inline spindle - Massive, precise milling table with four T-slots, generously dimensioned and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch switch makes it much easier to run in programs - Tool changer double-arm gripper with 12 tool positions - Coolant unit with chip flushing system and cleaning gun - RJ45 plug connection, USB and 230 V power connection - Enclosed control cabinet with integrated heat exchanger ensures optimum temperature temperature and prevents the ingress of dirt particles - Oil separator - Machine light in the work area

Condition: used, mileage: 987,000 km, power: 260 kW (353.50 HP), first registration: 05/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2025, color: silver, gearing type: automatic, emission class: euro6, loading space length: 7,450 mm, loading space width: 2,500 mm, loading space height: 2,500 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Well-maintained Mercedes Benz Antos 1835 refrigerated truck equipped with Lamberet deep-freeze box body, tail lift, and Thermoking refrigeration unit (diesel/electric). Special features: - Axle load measurement system, front axle load 8.0 t - Driver’s airbag - Audio system: CD radio (Bluetooth) - Passenger side exterior mirror with maneuvering position - 220 Ah battery - Brake connections: Standard and DuoMatic - Compressed air connection in cab - Air horn - Driver assistance system: Attention Assist (drowsiness detection sensor) - Driver assistance system: Brake Assist (Active Brake Assist 3) - Driver assistance system: Lane Keeping Assist - Driver assistance system: Roll Control Assist - Cab: steel-sprung, comfort version - 12-speed gearbox – type: G 211-12 - 12.7 cm info display with video function - Aluminum fuel tank: 290 liters, right side - Front engine PTO, prepped for Frigoblock - Reinforced engine brake - Tire pressure monitoring system - Acoustic reverse warning system (external warning signal) - Tail lift control switch - Reinforced rear cross member - Circuit breaker - Cab seats: armrest for passenger seat - Cab seats: comfort suspension seat for driver - External sun visor - Side window sunblind, driver’s door - Additional 24V socket in passenger footwell Additional equipment: - Emission standard EURO 6 - Axle configuration: 4x2 - Trailer brake – 2-line system, connections left - 24V/15-pin trailer socket - Antos - Tailpipe directed to vehicle center - Electrically adjustable and heated exterior mirrors - Rear axle differential lock - Steel air tanks - Medium air unit - Cab width: 2.30 m - Hydraulic cab tilting system - Cab: S ClassicSpace - Reinforced cab (Sweden package) - Cab floor with 320 mm engine tunnel - Suspension: leaf/air - Front springs: 2-leaf, 7.5 t - Electric window lifters - Tinted windscreen - 100 A alternator - AdBlue (urea) tank: 60 liters - Manual steel roof hatch Nedpfx Agoxai Dcs Dowf - Rear axle crown wheel 440 - Body/chassis: chassis frame - Central locking system - Unregulated power steering pump - Front air intake - Engine: 7.7 liters, 260 kW, inline 6-cylinder diesel (OM 936) - Engine compartment encapsulation - Ramp mirror - Spare wheel - Residual heat utilization - Disc brakes on front and rear axle - Seat cover/upholstery: fabric - Cab seats: functional passenger seat - Front mudguards - Front axle stabilizer - 24V cab socket - Tachograph / digital control unit (EU compliant) - Aerodynamically shaped underbody paneling - Front underrun protection - Pre-installed toll system interface - Cranked front axle - Permissible gross weight: 18.00 t Tire condition: Front axle approx. 40%, rear axle approx. 5%. Errors and prior sale excepted!

Condition: ready for operation (used), functionality: fully functional, 1 x Watkiss Nearline Powersquare 224 – Booklet Maker, e.g. for Xerox Digital Presses / Booklet Production Ready for immediate dispatch from warehouse in Flensburg – ideal for streamlined booklet production with Xerox systems, both online and offline integration possible. Counters: 1. Books: 1,109,917 2. Sheets: 8,905,801 3. Stitches: 2,735,224 Compatible For: • Xerox iGen Series • Xerox Nuvera Series • Xerox Color 800i/1000i Presses • Xerox Versant 2100 • Xerox Color 8250 Manufacturer: Watkiss Model: 224 Configuration Includes: - Watkiss PSQ224 Main Body RA - Watkiss Bridge Link R4 - Watkiss Bridge Frame Cover - Watkiss Power Stack 200 (book stacker) - Watkiss PBS Care Kit - Watkiss PSQ 2-Knife Trimmer - Watkiss P2T/PBS Interface Kit - Watkiss P2T/PBS Trim Conveyor Kit - Watkiss Travel Base Nodowf Rxuopfx Ag Dewf The Watkiss PowerSquare 224 is a complete professional booklet making system for both digital and offset printing environments, offering three modes of operation: inline, nearline, or offline. This machine integrates four processes—stitching, folding, spine forming, and trimming—in one unit to produce SquareBack booklets up to 224 pages. Features fully automatic setup for different booklet sizes and page counts, including adjustable stitch leg length for variable spine thickness. For inline workflows, compatible with major digital press manufacturers (e.g. Kodak, Canon, Konica Minolta, Xerox, Ricoh) providing seamless production finishing solutions. Engineered for high-volume, reliable production and ease of operation—designed for extended runs with minimal operator intervention. Maximum booklet thickness: 0.39” (using 50 x 80 g/m² sheets). Suitable for booklets from 8 to 224 pages with a single device. Duty Cycle: • Average monthly volume: 50,000 books • Peak monthly volume: 150,000 books Electrical: 50 Hz First Installation: 2019 (Year of Manufacture: 12/2018) Books/booklets produced: 700 (from Xerox Showroom) Availability: Immediately Inspection welcome in Northern Germany. Condition: Fully tested, under service contract since new, and very well maintained. English manual available. Only for sale to business customers (B2B only). Video link available on request.

Condition: not inspected (used), functionality: unexamined, NC-125 diesel injection pump test bench in used condition. This is a classic mechanical test stand designed for testing and calibrating diesel fuel injection pumps and injectors. Unit features a rotating pump mount, multiple high-pressure test lines, analog gauges, and manual control panel. Ideal for diesel repair shops, agricultural equipment service, or restoration projects. Machine shows signs of normal use (oil, wear, aging components) but appears complete. _____ Specifications (typical for this type) • Model: NC-125 • Type: Diesel injection pump test bench • Operation: Mechanical / analog • Applications: Inline injection pumps Rotary/distributor pumps • Includes: High-pressure lines Gauge cluster Pump mounting platform _____ Condition Nwodsyx Sihjpfx Ag Dsf • Used / untested • Cosmetic wear, oil residue • Sold as-is

Condition: good (used), Year of construction: 2017, Endoline SPT case erector and taper Nwsdpfoyti Ntox Ag Def 2017, Endoline 102 Case erector inline with Endoline SPT Case taper with top and bottom tape heads and side grip belts, with spare belts and boxes of tape, mobile, 1Ph