Used Lowara Sv409F15T/A for sale (67,085)

Condition: used, This listing is for a Raymond A Lamb E18.12 Mini Hotplate Iedpfjxzgxmex Anweth

Condition: used, This listing is for a Raymond A Lamb E22 Cassette Labeller The Cassette MicroWriter System is ideal for automating the referencing of processing cassettes with relevant specimen information – providing a secure method of cassette identification. Controllable via an RS232 serial interface, it is possible to link the unit to a wide range of computer equipment and Bar Code systems. This item was removed from a life science lab as surplus to requirements. Features Should the unit run out of cassettes during the sequence, an audible alarm will sound MicroWriter has a serial interface and is controllable from any device with a RS232 communications port. MicroWriter responds to a restricted set of 127 ASCII characters. Special characters are available upon request including foreign languages and customised symbols. Technical Specifications Hopper Capacity: 75 cassette x 6 Tape: 29mm Wide Itjdexzhg Sjpfx Anweh

Condition: used, This listing is for a Raymond A Lamb E65 paraffin section floating out bath. The Paraffin Section Flotation Bath is designed to assist with the handling of paraffin wax samples in histology and pathology laboratories. It is essentially a hot distilled water floating out bath that allows for the meticulous manipulation and location of sections onto glass slides Black interior provides high contrast for viewing samples Temperature range: Ambient to 65°C Analogue control of temperature Heater and overheat lights 22cm Diameter of bowl Dims 33cm (D) x 28cm (W) x 14cm (H) Iedpfx Anexzhtrowjth Listing: Raymond A Lamb E65 Paraffin Section Floating Out Bath

Condition: used, This listing is for a Raymond A Lamb E22 Slide Microwriter Iedpoxzhgrjfx Anweth

Year of construction: 2001, condition: excellent (used), I sell bottom grinder Costa A1 ACT 1150, year 2001. Cylinder configuration with soft electronic segmented pad. Working width 1150mm. Belts 1180x2620mm Press rollers for short work pieces. Fan for vacuum.included. Air blower for both units. Itjdpfjgq U R Nsx Anwoh Total weight 2500 kg. 2 motors 7,5 kW and 15 kW total power 27 kW Very good condition, serviced machine. Available immediately.

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Ijdpfxsm Nckfs Anwjth

Condition: ready for operation (used), Year of construction: 2001, With documentation, an inspection is possible. Ijdpfx Anjf Ddrloweth

Year of construction: 2020, condition: ready for operation (used), The driverless vehicle was used for transporting two bigbags, max. product weight: 2x 1.1t, max. product dimensions: 1200x1200x1950mm, max. driving speed: 40m/min, controls: SIEMENS SPS, weight: 3.6t, operational hours counter: 20h. Isdjk Rbdhopfx Anwsth

Condition: excellent (used), Year of construction: 2002, BACHOFEN Turbula T2F Shaker Mixer The mixing container is set in three-dimensional motion, subjecting the material to alternating, rhythmically pulsating movements for intensive mixing. Max. volume: container with 2 L capacity Ijdpfxjyc R Nys Anwoth Container dimensions: approx. Ø 130 mm x 215 mm Speed is adjusted via a stepped pulley. Manufacturer: Willy A. Bachofen GmbH Year of manufacture: 2002 Space requirement: 50 x 60 x 40 cm

Condition: used, functionality: fully functional, Vertical insulated stainless steel tank Exterior dimensions: Dia Ø 2850/3000 mm, total height 5500 mm. Vertical, insulated stainless steel tanks – 2 units. Capacity: 30,000 L 50 mm insulation, completed with aluminium TRP plates. Conical bottom with 3" outlet. Conical top with ventilation. Manhole in lower part of the cylinder. Brand: Gjettermann & Nielsen A/S Itedpfx Ajxp Hihonwoh Quality: AISI 316 (V4A).

Condition: used, Manufacturer : Halvor Forberg A/S Model: F-1000 Iedpsx R Db Hefx Anwjth Type : Paddle mixer Nominal volume : 1000 L Min volume : 400 L Max volume : 1400 L Total discharge : pneumatic Power : 15 kW Weight : 3000 kg

Condition: good (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 2,050 mm, input frequency: 50 Hz, Complete decoiling line including: - 3-strand infeed dock - A. CREMONA type CE12 year 1995 - A. CREMONA type SFH 2050x1200 year 1995. - Intermediate conveyor with cell detection of open defects. - A. CREMONA ROTAX 2100 year 1995. - Transport and separation conveyor to stacker. - Waste return conveyor. Iedpfx Anjul S D Nswsth - A. CREMONA vacuum stacker. CREMONA 4 stations, with lifting tables. - Total length 37m (excluding infeed platform). -Total installed power: 360 kW - 400V-50 Hz

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. Itjdpfx Anoxab Iyjwoh For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l Itedpfx Ansxab Itewjh available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: new, roll diameter 51 mm Wheel width 125 mm weight 20 kg height adjustment 560-975 mm Furnishing: - Heavy three-sprue design for maximum loads - Roller support steplessly height adjustable and clampable - Safe workpiece support - Solid and heavy-duty galvanized steel rollers - With two rollers, each 125 mm long, ideal for pipes, ... techn. Data : Roll width 2 x 125 mm Roll diameter 51 mm Height adjustment 560 - 975 mm Load capacity, max. 700 kg Standpipe diameter 74/52 mm Itjdpow U U U Rjfx Anweh Weight approx. 20 kg

Condition: new, roll diameter 51 mm Wheel width 350 mm weight 20 kg height adjustment 575 - 975 mm Load capacity per arm max. 700 kg Furnishing: - Safe workpiece support - by massive and heavy-duty galvanized steel rollers - Roller support steplessly height adjustable and clampable - Problem-free and efficient material transport for the supply and removal of workpieces techn. Details: - Load capacity, max. 700 kg Isdpfx Ansxaaivjwjth - Standpipe diameter 74/52 mm

Condition: new, length 1500 x 740 x 780 innen mm weight of the machine ca. ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l Iodsxab Imopfx Anwjth available for a surcharge: - 2x fixed castors / 1x swivel castor .. 80.00 euros

Condition: like new (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 20161259/2017, Filling system for all liquids. The system was used to fill disinfectant bottles. The system was put into operation in 2017 and is still as good as new, having only been in operation for a few hundred hours. The article produced was only sold during Corona. Ijdpovmnkrofx Anwsth It is also possible to purchase the complete product. Unfortunately there are only a few photos, but we would be happy to send you a video of the system in operation.

Condition: new, Year of construction: 2025, operating hours: 3 h, functionality: fully functional, feed rate X-axis: 7 m/min, workpiece weight (max.): 1,000 kg, working width: 2,500 mm, volume flow: 8,000 m³/h, year of last overhaul: 2025, overall weight: 3,200 kg, type of input current: three-phase, passage height: 210 mm, total height: 2,350 mm, total length: 2,450 mm, total width: 3,500 mm, working height: 950 mm, Ceetec DuoFlex Spray – The Coating Machine for Joiners, Furniture Makers, CLT and Glulam BSH Suppliers, and much more cases. Wherever a solid, straightforward, yet exceptionally well-equipped machine is needed, the DuoFlex Spray surface spray machine comes into play. Spraying doesn’t have to be complicated – not when you have a robust, long-lasting machine (made in Denmark, electronics from Germany – Beckhoff and others) that puts the operator at the center of it all. Everything is intuitive and easy to use, yet you get features you’ll struggle to find elsewhere – or only in significantly more expensive machines. Here are some hard facts about the DuoFlex Spray: 1. Color changes in just 3–5 minutes 2. System volume only 2.5–3L of paint/lacquer Itodpfxeffc Tyj Anwjh 3. Suitable for both solvent-based and water-based coatings 4. Two fully separated circuits – ideal for solvent/water or clear/topcoat separation 5. Maximum reproducibility – thanks to smart programming that stores all key parameters automatically 6. Quick to learn – after just 4–6 hours of training, even a baker can spray better than a manual sprayer with 10 years’ experience 7. Modular expandability – drying systems, sanding units, preheating, robotic integration – all from a single source 8. Service that speaks your language – our owner spent nearly 10 years as a coatings manager and brings hands-on expertise to your shop. The machines are extremely durable, and if anything should go wrong, we maintain well-stocked spare parts warehouses in both Germany and Denmark Processing dimensions for the DuoFlex Spray: 1. Standard: 1,300 mm width × 200 mm height 2. Larger: 1,800 mm width × 200 mm height 3. Up to: 3,200 mm width × 330 mm height Length: from 250 mm up to virtually unlimited. If you want to coat CLT ceiling panels 16, 18, or 20 meters long, we’ll simply build the right handling system for you. Sound interesting? Would you like to try the machine in our technical center? Do you have specific requirements and wonder if we can deliver? Then I’ll be happy to help you personally. Best regards, Martin Bruhn Owner, Bruhn Lackieranlagen // Exclusive Sales Partner of Ceetec A/S – Middelfart, Denmark

Year of construction: 1991, condition: excellent (used), A. COSTA PUMA 2/60 double-shaft multisaw - Italian production - year of production 1991 TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 45 and 45 kW engines 3 kW feed motor Itedpjh Izpcjfx Anwsh 1.1 kW height adjustment motor disc diameter max. 300 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm track width 350 mm total power of 94 kW feed control on the inverter automatic central lubrication minimum length of the element 600 mm electric height adjustment electric shaft height adjustment four upper pressure rollers pneumatic clamps five anti-ejection pawls shaft position indicator stub diameter 2 x 220 mm spindle speed 4500 RPM dimensions of the machine (length / width / height) 240/235/210 cm weight ~ 6000 kg

Condition: like new (used), A. COSTA PUMA 2/50 350/160 twin-shaft multi-blade saw - made in Italy TECHNICAL PARAMETERS: cutting width 350 mm cutting height 160 mm 37 and 45 kW motors feed motor 3 kW adjustment of the width of the lower shaft blade diameter max 280 mm spindle diameter 2 x 60 mm sleeve diameter 2 x 80 mm Iodpfxjqy E Rls Anwjth width of track 350 mm total power 85 kW two feed speeds 15 and 22 m/min central lubrication minimum workpiece length 600 mm electrical height adjustment shaft height adjustment six top pressure rollers pressure rollers mechanical four anti ejection latches cast iron construction spigot diameter 2 x 220 mm rotation of spindles 4500 RPM overall dimensions of the machine (length / width / height) 250 / 235 / 210 cm weight ~ 5000 kg

Condition: used, • A-frames for jumbo dimensions • 5 feet form one frame - 30 feet available = 6 frames • Cross tubes included • Glass support area: 2 x 280 mm Iedjyf En Aspfx Anwjth • Price: €300 / unit

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology Iodpex Tdyzefx Anwsth • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: used, Polish Lathe / Polishing Machine Between points: 1500 mm Centre height: 180 mm Maxi diameter to polish: Ø 380 mm Spindle CM3 Spindle speed driven by speed variator Itjdpexuf Hvefx Anwjh Pneumatic tailstock Equipped with a vaccum system (only air hose to plug in) Machine was used to polish axes Voltage: 220 V mono Dimensions (L x W x H): 3200 x 1000 x 1900 mm Weight: 1,2 T

Condition: used, Dane techniczne: Szerokość gąsienicy: 350 mm Max wysokość cięcia: 200 mm Max średnica piły: 300 mm Płynna regulacja posuwu Automatyczny system smarujący Ochrona antyodbiciowa Króciec odciągowy: 2x220 mm Wyłącznik bezpieczeństwa Moc silnika wału górnego: 55 kW Moc silnika wału dolnego: 55 kW Zasilanie: 380 V Obroty silnika: 2800 obr./min Producent: A.Costa Wymiary całkowite: Długość: 2700 mm Szerokość: 2220 mm Wysokość: 1650 mm Itedpfx Ajichkconwsh