Used Minster Knuckle Joint Press for sale (13,338)

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Iaedpefifg Hofx Ab Nst Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: new, Year of construction: 2024, Press brake AD-S 40220 | 4 meters 220 tons Everything can be configured on request, very short production and delivery times. We will be happy to send you further information on request. Technical data: Bending capacity: 220 tons Bending length (mm): 4050 Passage between uprights (mm): 3600 Stroke (mm): 265 Installation height (mm): 530 Projection (mm): 410 Table height(mm): 900 Table width(mm): 104 Y Rapid traverse (mm/sec.): 160 Y Working speed(mm/sec): 10 Y Retraction speed(mm/sec.):140 X axles working speed(mm/sec.): 250 R axes working speed (M): 140 R axes travel distance: 250 X axes distance(mm): 650 Motor power: 22 kW Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 14750 kg Standard equipment Control system: CNC Cybelec ModEva 19T CNC controlled motorized crowning European tool clamping system / or Durma clamping system on customer request Extended equipment: Iodpfx Abjfirx Ds Nsat Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes backgauge: X1,X2,R1,R2,Z1,Z2 Control unit: DELEM DA-66T Delem 66T - 69T or Durma control is selectable DAM - Durma angle measuring system Hydraulic upper tool clamping Wila NSCL-I-HC/UPB - PRO - 180 t/m Hydraulic lower tool clamping Wila NSCR-I-HC-CNC/UPB - PRO Powerpack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 bending aid 750mm to 1500 mm selectable Parking area for support arms (1000mm) TANDEM preparation Laser bending line Oil heating Manual or motorized central lubrication Air conditioning for control cabinet

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 Iajdpfx Aed Srk Sob Not European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. AD-R 80400 Bending force: 400 tons bending length: 8050 mm With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in their sector, whose products are sold in 120 countries. With the branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here here we are your direct contact person from the ranks of Durmazlar, who will competently assist you with advice and practical support when it comes to machines for sheet metal processing. Our demonstration centre gives you the opportunity to get an overview of our machines on site, to be convinced of the quality and precise technology of our products at first hand and to receive the best possible advice that is geared to your company goals. It is our task to be your direct contact person for you, our customer, on site and to offer you services in the areas of training and customer service. We are now happy to accompany you from Germany - from advice, through the purchase and di Iasdpfxofin N Sj Ab Net

Condition: new, Year of construction: 2024, operating hours: 32 h, Make: DURMA Type: AD-S 30135 Year of construction: 2018 Folding length: 3050 mm Pressing force: 1350 kN Control: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1,Y2, X Clearance between the stands: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm (double guide, aluminum) Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 Manual crowning European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Backgauge: motorized with linear guide & ball screw spindle Backgauge finger height-adjustable, R-axis manual Backgauge motor servo Safety covers on the side CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C+safety cover & switch The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Iajdpfx Abedx Rd Nj Njt Further machines are available for demonstration at our demonstration center in Staufenberg. We will be happy to send you further information on request.

Condition: new, Year of construction: 2024, High-performance press brake AD-S 40400 from DURMA: A masterpiece of technology! The DURMA AD-S 40400 press brake combines precision, power and efficiency in a robust package designed specifically for demanding environments. This model not only offers outstanding performance and reliability, but also a wide range of high-quality standard features and options that make it an indispensable tool in your production. Technical data: ・Bending force: 400 tons ・Bending length: 4050 mm ・Clearance between the uprights: 3400 mm ・Rapid speed: 100 mm/s ・Working speed: 8 mm/s ・Return speed: 80 mm/s ・Motor power: 37 kW ・Weight: approx. 27,760 kg Features and benefits: ・Control: With the optional DELEM DA-66T touchscreen control for unsurpassed speed and ease of operation. ・Rugged construction: Reinforced frame for loads up to 200 tons ・Flexibility in use: With 2 support arms and a backgauge with two finger blocks and controlled X-axis for versatile applications. ・Advanced motor power: Equipped with AC servo motor for back gauge and ball screws, it provides fast and precise movements. ・Highly advanced safety: Manually adjustable F.AKAS II M CE safety system protects the operator without compromising on performance. Standard equipment: ・Y1, Y2, X (=650mm), R manual (2 stop fingers) ・Control DT 15 ・Manually adjustable F.AKAS II M CE safety system (on ram) (CE) ・CNC crowning ・Support arms with T-slot and spring-loaded folding stop, laterally adjustable on linear guide Iasdpfxerwniqo Ab Not ・Durma tool system holder ・AC servo motor for backgauge and ball screws ・Shields at the side and rear Options: ・DELEM DA-66T touchscreen control for intuitive operation ・6 axes - Extended X/R/Z1/Z2 X=750 mm backgauge options ・Reinforced frame, designed for a load of 200 tons per 1 meter, total pressing force is maximum 400 tons Price information: ・The price quoted is for the machine only. Tools and freight costs are not included.

Condition: used, Working width 3500 mm Working height 2500 mm # 6913 Hess Quickstep frame press ----- Sold on behalf of the customer in its current condition Technical data summary (please enquire about any additional accessories included) ----- General ----- Working width: 3500 mm Working height: 2500 mm Iaodsy S Diyjpfx Ab Njt Features: ----- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long stroke cylinder) > Horizontal adjustment type: electric > 1 medium pressure bar According to the customer, the control system has been renewed and the hydraulic pump with connections has been renewed (technical information according to the manufacturer - no guarantee!)

Year of construction: 1977, condition: ready for operation (used), A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement. Isdpfoy S A Nfex Ab Neat

Year of construction: 2011, condition: ready for operation (used), 2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement. Iajdpfx Asy S A I Ueb Not

Year of construction: 1983, condition: ready for operation (used), A high-speed press is offered. Press force: 38t, stroke rate: 60/300 per minute. Stroke: 6mm-50mm, ram adjustment: 40mm, infeed height: 90mm. Table surface X/Y: 550mm/440mm. Soundproof enclosure, accessories: external control cabinet, tool area lighting, vibration dampers. Total weight: approx. 2800kg, overall dimensions X/Y/Z: 1650mm/1450mm/2250mm. Inspection possible by arrangement. Iajdsy S A Nxjpfx Ab Net

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 Iasdpfxswbvmis Ab Njt V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: ready for operation (used), Year of construction: 2008, filling opening width: 1,195 mm, filling opening length: 65 mm, bale length: 120 mm, bale width: 110 mm, bale height: 120 mm, bale weight: 550 kg, total width: 1,570 mm, total height: 2,985 mm, total length: 1,800 mm, overall weight: 2,403 kg, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Iedpfoy R Sk Njx Ab Nsat Filling opening: 119.5 x 65 cm Condition: very good! Video of the machine in operation available on request. Transport also possible.

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Ijdpjhmmfkefx Ab Noat Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Single-column toggle press MAY - MAYPRES - KOMATSU Type MKN 1-63/6 Eccentric toggle press, eccentric press Year of manufacture approx. 1984 Pressing force 60 tons Thrust 160 mm Table size 580 x 360 mm Ram surface Ø 270 mm Clamping pin bore Ø 40 mm Distance between columns 218 mm Ram stroke 60 mm Iasdpfx Abov Uraao Nst Ejector stroke 15 mm Ram adjustment travel 30 mm Max. installation height 300 mm (with intermediate table plate) Stroke rate 70 strokes per minute Motor speed 1400 rpm Motor power 3 kW Power supply 380 V, 50 Hz - Pneumatic clutch and mechanical brake with pneumatic release (separate clutch-brake combination) - Table intermediate plate L x W x H 580 x 360 x 58 mm, with holes and cutouts - Mechanical ejector, ejector device in the machine table, Ø 80 mm - Electric two-hand control and foot switch - Movable safety screen, UNIDOR protective housing with pneumatic front screen - BALLUFF cam switch Space requirement L x W x H 1400 x 1200 x 1850 mm Weight 3 tons Good condition

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Iajdpfx Asyupulsb Njt Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table Iajdswva I Hopfx Ab Not - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Ijdpfx Abevq Rtkj Njat Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Iedpfxsrzfh Ho Ab Noat Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 Iaedpfx Aedzp Tcjb Net pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: good (used), Year of construction: 2021, functionality: fully functional, pressing force: 58 t, Very good condition, fully functional, low operating hours, year of manufacture 2021, pressing force 58 tons. Iodpfxoyzw U Uj Ab Neat New price: seen for €19,500 Pressure cylinder has been dismantled for transport, inspection possible by appointment. Further presses in stock.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Iodpfx Abey R Nnfo Njat Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 1977, pressure 25 t throat 250 mm stroke 400 mm table surface area 600x480 mm Iedpfx Aboy Slius Noat ram surface Ø135 mm table height 980 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 2000x2000x2700 mm

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm Iodpfx Aboy Snlxe Neat The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t Iaedpfxjy Snkbj Ab Njt

Condition: good (used), Year of construction: 1994, Clamping Unit: Isdpsy Sni Rsfx Ab Neat Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s