Used Mubea Mubea 60 Aufnahme 50N for sale (21,502)

Condition: ready for operation (used), Pressure force: 10 tons Bsdpfxohtq Hfj Ablowr Projection: 110 mm Required space: 300 x 170 x 680 mm Weight: 32kg

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm square iron: 20 mm Bedpfx Abjtx Uqaolewr round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Set for robotic laser welding Scope of supply: 1 x Laserline LDM1200-60 (1320W).(2011). 1 x 2 Way Hyfra CHILLER.(2018). 1 x HIGHYAG LASER WELDING HEAD. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free. Bodpfxorfucfo Ablswr

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Screw diameter: 60 mm, L/D = 30 Grooved feed section Throughput: approx. 450 kg/h PE Motor (DC drive): 163 kW Screw speed: max. 221 rpm Tool zones: 5 pcs + 1 pc for adapter Melt pressure & temperature sensors included Control system: Cincinnati EXc Pro-NT Cylinder in bimetal design – condition: good Screw with wear-protection and hardened feed section – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Weight: 2,500 kg Bwodpfxeyrihgo Ablsr

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Bwedpfxeyvvkwj Abler Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, spindle diameter 160 mm x-travel 4000 mm y-travel 2200 mm z-travel 1500 mm 270 mm spindle turning speed range 20-2000 U/min Control Heidenhain type TNC530i table surface area 3000x1600 mm table load 40 t spindle taper ISO 50 spindle motor 50 kW T-slot - width 28 mm number of T-slots 9 Maschine wurde überholt machine is retofit The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Bwsdsyq Swbjpfx Ablor possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm Bsdpfx Abopuy H Deljwr - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm Bsdpforll I Ujx Ablewr - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: good (used), OFFER 70105 Technical data: - Hole diameter approx. 44, 45, 48, 52, 2 x 55, 2 x 58, 61, 66 mm - 2 x 68, 2 x 80, 81, 85 mm Bedpfx Aog T S Axjblswr - Elongated hole dimensions approx. 12 x 42, 12 x 50, 18 x 55 mm - Punch holder 58 mm - Punch height 54 + 58 mm - Adapter ring for punches - Die height 30 + 40 mm - Die outer diameter 90 + 140 mm - Adapter ring for dies 90 - 140 mm - Weight approx. 90 kg

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Bwjdpsxaaipofx Ablor range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, Year of construction: 1989, pressure 50 t throat 610 mm total power requirement 7,5 kW machine weight ab. 1700 kg dimensions 1500 x 650 x 1700 mm Bwsdpfoyv Nvaox Abler

Condition: used, Year of construction: 2000, pressure 100 t throat 620 mm stroke 0-100 mm hole diameter in sheet thickness 40 in 20 mm Bwsdpfx Abjyv Ncyelor no. of strokes 49 Hub/min total power requirement 15 kW weight of the machine ca. 3.500 kg

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 30 x 9 mm hole punching press: capacity (dia. x thick.) 20 x 13 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shear with: - Hole punch Bodpfxex Hp Aho Abljwr - Notcher - Foot switch - Machine light - Mounted on a trolley

Condition: used, round bar steel 33 mm Bwodpfxovkix Ej Ablor square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 28 x 10 mm hole punching press: capacity (dia. x thick.) 23 x 12 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m

Condition: used, round bar steel 30 mm square edge steel 28 mm L-beam 90 x 8 mm 150 x 8 mm pressure 35 t total power requirement 2,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,75 x 1,0 x 1,5 m Bwodpfx Asvu Hb Sebler Profile steel shears combined with: - Foot switch - Length cut

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull • Hand finder Bwsdpfjv N Hrtsx Abljr • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Punching force: 300 kN Bedpfxjxcndyj Abljwr For example, punch a 20 mm hole in 12 mm steel Stroke triggering via foot switch Assortment of tools is included in the price

Condition: used, Punching force: 350 kN (punches e.g. 23 m in 12 mm material) Cuts 150 x 10 mm on the flat steel shears Two separate foot switches for the punching and shearing sides, allowing independent punching and shearing Support table on the punching side with stop cams A range of tools is included in the price Bsdpsxqqphjfx Ablewr

Condition: used, Punching force: 800 kN (punches e.g. 30 m in 20 mm steel) Cuts 350 x 16 mm on the flat steel shear Foot switch for stroke activation Support table on the punching side A range of tools is included in the price Bodsw Rvu Repfx Ablowr

Condition: used, Year of construction: 1986, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Bwjdpfef Nwqdsx Abler Holes e.g. 30 mm diameter in 20 mm flat iron Assortment of tools is included in the price Weight: 3,000 kg

Condition: used, Max. punching force: 700 kN Projection: 510 mm Cuts on the flat steel shears 500 x 18 mm Holes e.g. 30 mm diameter in 20 mm flat iron Bsdpfx Ajumluqjblowr Support table on punch side with stops Assortment of tools is included in the price Weight: 3.000 Very good condition

Condition: used, The Mubea tools shown are not sold in their entirety. You can tell us what kind of punches and dies you need, so that we can put together an individual range for you. Bwedpfx Ajf Srpcobler

Condition: used, Punching force: 1000 kN Reach: 760 mm Locht e.g. a 40 mm hole in 22 mm steel Bwsdpfox Rbzdex Ablor Stroke triggering via foot switch Quick change device Assortment of tools is included in the price 3000 kg

Condition: used, Electrical contact length stops for Mubea and Peddinghaus in various lengths. The price is for a Mubea length stop 1000 mm. Bwodef Srn Ropfx Ablor

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible. Bwedpfx Absium Euelsr