Used Nebes Tm 210 for sale (5,298)

Condition: used, Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube Itjdpfjdbr U Dex Ag Asn -for: scribing plate, clamping plate, alignment bench ... -Number: 1x prism -Price: complete -Dimensions: 210/85/H226 mm -Weight: 14 kg

Condition: as good as new (ex-display), Year of construction: 2026, PTC JTR-C Cold Water Trailer – similar to, but not a Dynajet, Oertzen, Falch, ROM, Rioned, Karo, etc. - Single-axle trailer with a hot-dip galvanized frame, support leg with wheel, parking brake, automatic reverse gear, stand feet, taillights and reflectors, tow hitch for 50 mm coupling, 13" tires and ABS. The following cold water models are available: Isdpsfdkbgsfx Ag Aotn JTR-C 60/200 | 60 l/min at 200 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/150 | 75 l/min at 150 bar | Engine: Kohler KDW 1404 26 kW JTR-C 75/210 | 75 l/min at 210 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 84/190 | 84 l/min at 190 bar | Engine: Kohler KDW 2204 37.5 kW JTR-C 102/150 | 102 l/min at 150 bar | Engine: Kohler KDW 2204 37.5 kW Engine type: TIER III (Kohler) or Stage V (Yanmar) - Dimensions: 3,370 x 1,640 x 1,540 - Unladen weight: approx. 600 kg - High-pressure pump: HPP - HD hose reel: fixed and manual or hydraulic with a maximum of 100 m of 1/2" and 60 m of 3/4" hose (included) - Water supply hose reel: manual with 50 m of 3/4" hose - Water tank: 600 l - Options such as remote control, warning light, work light and accessories available upon request.

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm blade length:250 mm Iodpjcxxrpofx Ag Astn notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Year of construction: 2009, condition: ready for operation (used), A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible. Isdpfxsyvuuus Ag Astn

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Ijdpfsrc Hibsx Ag Ajtn

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 7,810 h, input current: 43 A, input frequency: 50 Hz, type of input current: three-phase, workpiece weight (max.): 2,804 kg, number of axes: 3, number of slots in tool magazine: 6, actuation type: electric, overall weight: 2,804 kg, number of tool turrets: 31, Equipment: CE marking, documentation/manual, type plate available, For sale is a Morbidelli Drilling Center with low operating hours – the machine is connected and ready for trials and tests. MORBIDELLI CX210 CNC Drilling Center R00169 MORBIDELLI CX210 TECHNICAL DATA Min./max. workpiece length mm 200/3,050 Min./max. workpiece width mm 50/1,300 Min./max. workpiece thickness mm 8/95 Max. traverse rate in the X-axis m/min 40 Max. workpiece weight kg 70 Max. traverse rates in the X-Y-Z axes m/min 70-40-30 F31LTC DRILLING HEAD Number of vertical spindles pcs. 21 Number of horizontal spindles in the X-axis pcs. 6 Number of horizontal spindles in the Y-axis pcs. 4 Motor power kW 2.2 Spindle speed rpm 4,500 (option 3,000 – 8,000) Fixed integrated saw in the X-axis, diameter mm 125 Max. saw blade thickness mm 6 Saw blade speed rpm 5,500 (option 3,600 – 9,700) INSTALLATION Compressed air consumption Nl/cycle 80 Dust extraction air requirement m3/h 3,300 Dust extraction air velocity m/s 25 Dust extraction nozzle diameters mm 200 + 80 Electrical protection kVA 19 Key advantages: -HSK63F milling head 6.6KW Ijdpfxszdfhas Ag Astn -Cutting saw -31 L drilling head -Infeed and work roller table -2 clamps instead of 1 pc. Speed 70 m/min Spindle + 6-position magazine

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 Itedpjv D Nzyefx Ag Ajn See condition

Condition: ready for operation (used), Year of construction: 2014, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 135541-100, clamping force: 3,500 kN, screw diameter: 65 mm, injection pressure: 2,070 bar, ejector stroke: 200 mm, controller model: B6P, TECHNICAL DETAILS Clamping Unit Clamping force: 3,500 kN Platen size (H × W): 1,030 × 1,140 mm Tie bar spacing (H × W): 710 × 710 mm Min. / Max. mould height: 300 / 710 mm Max. opening stroke: 1,380 mm Centring ring diameter: 160 mm Ejector stroke: 200 mm Injection Unit Itjdpfsx A A E Eox Ag Aon Screw diameter: 65 mm Shot volume: 1,171 cm³ Shot weight (PS): 1,078 g Injection pressure: 2,070 bar Max. injection speed: 600 mm/s MACHINE DETAILS Control: B6P Operating hours: 47,000 h EQUIPMENT 4 pneumatic valves 1 core puller

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 200 h, fuel type: diesel, axle configuration: 6x2, The aerial work platform was newly purchased and has only been used sparingly. It currently has approximately 200 operating hours and is in very good condition. Technical specifications: Type: DINO 210XT II Year of manufacture: 2024 Trailer-mounted articulated telescopic aerial work platform Itsdpfezvzz Sox Ag Aon Air-cooled HATZ diesel engine, type 1B30 HD pump, 3 cm³ Cable remote control for the drive system Fixed dust box Electric motor drive MyDINO Telematics included at no extra cost Data transfer for 36 months Extension of the warranty to 36 months Access to MyDINO data via app after registration Trackunit TU600-25 MyDINO Serial number: 5550404 4100 210XT Documents and accessories: Inspection book including test certificate EC declaration of conformity Proof of initial commissioning 2 operating manuals 2 maintenance manuals 1 spare parts catalog on USB stick 2 sets of keys Condition The aerial work platform was newly acquired and has only been used a few times. The operating hours are approximately 200 hours. Due to the limited use and the extensive equipment, the machine is in very good condition. Particularly interesting: Austrian type approval/individual approval, MyDINO Telematics including 36 months of data transfer, and extended warranty. Inspection is possible by appointment. Please contact us if you are seriously interested.

Condition: ready for operation (used), Heidenhain UE 210 ID 313500-03. The costs refer exclusively to the repair analysis of your component, which you can send to us. After evaluating your component, you will receive a quotation with the actual repair costs. If you approve the repair, the analysis costs will be waived. As part of the repair, your component will be completely overhauled and will receive a 3-month warranty from us. Itedpfx Agjy Nquqs Asn

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,000 h, Machine in good condition and ready for use Ijdszam Elopfx Ag Astn

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Robot: 812358 / Controller: 46122, overall weight: 1,430 kg, load capacity: 150 kg, arm reach: 3,100 mm, For sale is a used KUKA industrial robot, model KR 210 L150 2000, equipped with a (V)KRC2 ed05 controller. The 6-axis robot was manufactured in 2004 (manipulator) and 2007 (controller), offering a payload capacity of 150 kg and an extended reach of 3100 mm in the L version. The system is also configured with "absolute accuracy" measurement, providing increased path accuracy for precision applications. Areas of application include handling, assembly, palletizing, and automated manufacturing processes. Serial numbers are 812358 (robot) and 46122 (controller). Ijdsy N Ei Ajpfx Ag Aetn

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: Robot: 920729 / Controller: 201086, overall weight: 1,552 kg, load capacity: 210 kg, arm reach: 2,700 mm, For sale is a used KUKA industrial robot, model VKR 210 R2700, in combination with the advanced KR C4 nexxt controller. This 6-axis robot was manufactured in December 2010 and features a payload capacity of 210 kg and a reach of 2700 mm. As a VKR version, the system meets Volkswagen standards and is optimally suited for demanding tasks such as material handling, spot welding, and automated production. The KR C4 nexxt controller allows for enhanced energy efficiency and simplified integration into modern manufacturing environments. Serial numbers: Robot 920729, Controller 201086. Operating hours are unknown. Iedpfsy N Ekyox Ag Ajtn

Condition: good (used), Year of construction: 2014, machine/vehicle number: 0-200-01-2196, functionality: fully functional, input current: 63 A, height adjustment type: electric, feed rate X-axis: 25 m/min, actuation type: electric, total height: 2,000 mm, total length: 7,850 mm, total width: 2,300 mm, overall weight: 5,000 kg, Equipment: CE marking, documentation/manual, Edge banding machine, good working condition, fully electric adjustments, working speed 25m/min, available immediately. Isdpfx Agjy Ebl So Aetn

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: FN531056, load capacity: 1,000 kg, empty load weight: 2,727 kg, lifting height: 3,810 mm, construction height: 2,430 mm, operating hours: 239 h, Jungheinrich EKS 210 high-lift order picker, year of manufacture 2017 with duplex mast Specifications: Jungheinrich EKS 210 Year of manufacture: 2017 Recorded operating hours (h): 239 Mast type: Duplex Lift height (mm): 3810 Itodpey H Exrjfx Ag Ajn Free lift (mm): 850 Overall height (mm): 2430 Load capacity (kg): 1000 Fork length (mm): 900 Own weight (kg): 2727 Front tyres: Polyurethane Rear tyres: Polyurethane Battery year: 2017 Battery capacity (Ah): 465 Battery voltage (V): 48

Condition: used, Year of construction: 1990, Cutting capacity at 90°: round: 210 mm square: 210 mm flat: 240 x 190 mm Itedpfx Aeymb Afeg Asn Cutting capacity at 45°: round: 150 mm square: 150 x 100 mm flat: 150 x 100 mm Saw blade dimensions: 400 x 30 x 1.5 mm 2 stroke speeds via pole-change motor: 16 and 32 m/min Drive motor: 380 V, 0.9 kW Weight: 170 kg Space requirement: 1190 x 480 x 1300 mm

Condition: used, mileage: 192,750 km, power: 132 kW (179.47 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 6,080 kg, maximum load weight: 5,910 kg, overall weight: 11,990 kg, tire size: 245/70R17,5, axle configuration: 4x2, wheelbase: 3,900 mm, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, cabin, crane, low noise, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, registration number house, 1x air seat, double bench seat, rear window, electric mirror, heated mirror, electric window left, electric window right, switch 6, ABS (anti-lock braking system), traction control (ASR), auxiliary drive, rotating beacon, leaf suspension, noise reduction G1, U-protection, lateral aluminum driving protection, hydr. cross-locking, crane behind house, emergency stop, foldable, 2-point support hydr, 2x hydr. extensions, green environmental sticker Itedpevhilasfx Ag Ajn Wheelbase: 3900 mm Body: 7t Technocar roll-off system type TNH 7 for city containers up to 4m & crane Amco Veba 807N2S Gearbox ZF 6S-800 OD, MAN BrakeMatic, C-cab, double bench seat. Swivel head steering! Load diagram: 2.5m-2740kg, 4m-1720kg, 5.56m-1210kg, 7.12m-935kg! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, functionality: fully functional, power: 112 kW (152.28 HP), gearing type: semi-automatic, fuel type: diesel, color: yellow, overall weight: 17,960 kg, lifting power: 4,000 kg/m, lifting height: 205,000 mm, tire size: 445 / 65 R22.5, Year of construction: 2021, machine/vehicle number: 2487358, Equipment: all wheel drive, cabin, Technical Data Year of manufacture: 2021 Engine: Diesel Load capacity at max. lift height: 2.5 t Load capacity at max. reach: 850 kg Load center: 500 mm Transmission type: W Dimensions (L x W x H): 6.92 m x 2.45 m x 3.08 m Engine power: 112 kW (150 hp) Net weight: 17,960 kg Displacement: 4.8 l Lift height: 20.50 m Max. reach: 17.8 m Lifting force: 4000 kg/m Max. speed: 40 km/h Ijdjytn N Eepfx Ag Ajtn All-wheel drive, all-wheel steering, stepless hydrostatic transmission Fully operational, standard signs of use

Condition: new, Year of construction: 2025, ∗JCB TM220 SV C New Vehicle∗ - JCB Diesel by Kohler [55kW/74hp] - Emission Standard Stage V with DPF - Lifting Height: 4.56 m - Rated Load Capacity: 2,200 kg - 2-Speed Hydrostatic Drive - 20 km/h - Tyres: GOODYEAR POWERLOAD 300/70R20 - Comfort Cabin (ROPS/FOPS) - Radio Preparation - Adjustable Steering Wheel - Fully Opening Windows - Heating - Limited Slip Differential Front and Rear Front Axle = 45% Rear Axle = 25% - Single-Lever Servo Control - Euro Quick Coupler - Fork Carrier with 1,345 mm Pallet Fork - LED Work Lights Front/Rear/Boom - Amber Beacon - Armrest Right & Left - Roof-Mounted Windscreen Wiper Immediately operational, many additional attachments in stock. Appointments for inspection are expressly desired. On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (Tel. …) will be happy to assist you. For further information, please visit our website. Subject to errors and prior sale! Itedpfoyfvztox Ag Ajn BSS, Quick Coupler System, Road Approval = Further Information = Please contact Tobias Ebert for more information.

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm Itsdpfx Agsx D Nlue Asn • Min: 340 mm • Max: 790 mm

Condition: used, Year of construction: 2008, functionality: fully functional, turning length: 230 mm, turning diameter: 410 mm, travel distance X-axis: 210 mm, travel distance Y-axis: 230 mm, Doosan PUMA H-310/TM CNC horizontal lathe, year 2008, equipped with FANUC Series 18i-TB control, ideal for precision machining of medium-sized workpieces with dual turret machining capability. Main technical specifications: Maximum turning diameter: Ø 410 mm Maximum turning length: 230 mm Recommended turning diameter: Ø 255 mm Maximum distance between spindle centers: 500 mm Axis travels: X: 210 mm Z: 230 mm Rapid traverse X/Z: 24,000 mm/min Main spindle: Chuck: Ø 250 mm Spindle nose: ASA A2-8 Speed: 3,500 rpm Power: 15/18.5 kW Turret system: Number of turrets: 2 Stations per turret: 12 Driven tools: Speed: 3,000 rpm Power: 4 kW Tool dimensions: 25x25 mm (turning) / Ø 40 mm (boring) Included accessories: Chip conveyor Itsdowt S Ugepfx Ag Aon Coolant tank with washing pump External high-pressure pump Various fixed and driven tool holders Manuals, electrical diagrams, CE declaration Compact, versatile, and high-performance machine, perfect for multitasking machining in high-efficiency production environments.

Condition: used, functionality: fully functional, Section steel shear and punch type 210/11, 80x8, beam 10 mm, solid material 30 mm, T-section 80x8 Isdpoy Dh Eiefx Ag Ajtn

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 635949, load capacity: 210 kg, arm reach: 2,696 mm, repeat accuracy: 0.06 mm, number of axes: 6, TECHNICAL DETAILS Payload: 210 kg Arm reach: 2,696 mm Outreach: 2,696 mm Axes: 6 Repeatability: 0.06 mm MACHINE DETAILS Control cabinet dimensions (L x W x H): 800 x 560 x 1,060 mm EQUIPMENT Robot Control cabinet Cables Teach pendant Itjdpfsyzyvhsx Ag Aen

Condition: excellent (used), functionality: fully functional, power: 107 kW (145.48 HP), shovel volume: 1.6 m³, Year of construction: 2016, machine/vehicle number: HHKHZ603PG0000278, The machine is used, fully operational Itjdpfxeyllc Hs Ag Asn

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, clamping force: 4,412 kN, screw diameter: 85 mm, injection weight: 1,870 g, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 450 tons Screw diameter: 85 mm Shot weight: 1,870 g MACHINE DETAILS Iodoy Ewn Nspfx Ag Aetn Tie bar distance: 800 mm x 800 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.