Used Ostas Opk-65 for sale (7,243)

Condition: new, sheet width 2000 mm Rodpjfv H A Rsfx Aizjt plate thickness 8 mm pre-bending total power requirement 7,5 kW weight of the machine ca. 3,6 t dimensions of the machine ca. 3600x1250x1350 m

Condition: new, sheet width 1270 mm plate thickness 3,0 mm distance between columns 1300 mm diameter of upper rolls 95 mm Rodpfx Aefv A Ezjizet total power requirement 1,1 KW weight of the machine ca. 0,37 t dimensions of the machine ca. 1,35 x 0,76 x 1,25 mm

Condition: new, sheet width 1070 mm plate thickness 2,0 mm distance between columns 1100 mm diameter of upper rolls 76 mm total power requirement 1,1 KW weight of the machine ca. 0,37 t dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts Rsdpsfv A Etsfx Aizst - CE certificate

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Redpfxsq Npqmo Aizst Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 09/2017, loading space length: 135,000 mm, loading space width: 24,800 mm, loading space height: 27,000 mm, total length: 13,820 mm, total width: 2,550 mm, total height: 4,000 mm, wheelbase: 8,910 mm, color: white, Year of construction: 2017, Equipment: tail-lift, = Additional options and equipment = Rjdpfx Aoy Ipw Ioizet - Air suspension = Further information = Axle configuration Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg; Steered Weights Unladen weight: 8,420 kg Payload: 21,580 kg Gross vehicle weight: 30,000 kg Functionality Tail lift: D'HOLLANDIA DHLM.30, tailgate, 2,000 kg Maintenance, history and condition APK (Technical Inspection): valid until 08/2026 Technical condition: good Visual condition: good Identification Registration number: OP-65-YR

Condition: used, Year of construction: 2000, Turret 1 - facing/length turning 155/280 mm Turret 2 - facing/length turning 82/120 mm Spindle bore (main spindle) 79 mm ((w/collet chuck 65 mm) Spindle bore (sub spindele 65 mm (w/collet chuck 42 mm) Spindle speeds (25-5000 rpm (main spindle) C-axis - 5000 rpm. Turret w/8 stations Control: Siemens Sinumerik 840 C Equipped with: Rjdpfx Aoy Hppzjizjt Magazine bar feeder Manuf. Simag model 65.1 - 3200 mm - built 2000 Chip conveyor Various tool holders

Condition: used, power: 36 kW (48.95 HP), fuel type: diesel, color: yellow, first registration: 05/2018, Year of construction: 2018, operating hours: 1,607 h, 1607 operating hours – new tracks – crawler excavator 6553 KG – quick coupler system – additional rotation functions – air conditioning – engine 36.4 kW – dozer blade – = More information = Intended use: Construction Drive: Crawler Unladen weight: 6,553 kg CE marking: yes Reference number: 86 Contact Miguel Cubas for further information. Rjdpfx Aeyxwxujizjt = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Redpfxey Iffhs Aizet Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, KRAMER + GREBE CUTTER 65 LITERS. Rodpfx Asy Hf Ugsizot 380V

Condition: new, 6.5 mm multi-axis springs and wire forms generator, featuring up to 16 axis, including wire rotation, one motor per slide, OD control and other nice features. The machine is widely used for agriculture double torsion springs, but not only : it can produce an extensive range of torsion, double-torsion, extension springs, as well as wire and strip forms Rodpfxsi Ik Ayj Aizjt

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • Machine design: 60° slant bed • Guideways: Roller guideways • Max turning diameter: 250 mm • Max turning diameter (standard): 120 mm • Max turning length: 900 mm • X1 travel (upper slide): 300 mm • Z1 travel (upper slide): 650 mm • Y1 travel (optional): ±40 mm • X2 travel (lower slide): 180 mm • Z2 travel (lower slide): 650 mm • X3 travel (counter spindle): 175 mm • Z3 travel (counter spindle): 670 mm • Main spindle chuck size: 175 / 200 mm • Maximum rod diameter (without reducing tubes): 62 / 65 mm • Spindle bore diameter: 79 mm • Spindle nose diameter: 170 mm • Collet diameter: 66 mm • Front bearing diameter: 120 mm • Main spindle power (40/100% ED): 35 / 25 kW • Main spindle speed range: up to 5000 rpm • Main spindle torque (40/100% ED): 370 / 270 Nm • Spindle drive type: AC motor with integrated spindle motor • C-axis: Integrated for oriented stopping and contouring • C-axis speed: 2000 rpm • C-axis holding torque: 270 Nm • Counter spindle power (40/100% ED): 26 / 21 kW • Counter spindle speed range: up to 5000 rpm • Counter spindle torque (40/100% ED): 290 / 230 Nm • C-axis (counter spindle) speed: 2000 rpm • C-axis (counter spindle) holding torque: 230 Nm • Rapid traverse X/Z (slide 1): 30 / 30 m/min • Feed force X/Z (slide 1): 4.0 / 7.0 kN • Positioning resolution X/Z: 0.0005 mm • Motor torque X/Z: 6 / 10.5 Nm • Motor speed X/Z: 3000 rpm • Ball screw pitch X/Z: 20x32 / 20x40 mm • Rapid traverse X/Y/Z (with Y-axis): 30 / 15 / 30 m/min • Feed force X/Y/Z: 4.0 / 4.0 / 7.0 kN • Positioning resolution X/Y/Z: 0.0005 mm • Motor torque X/Y/Z: 6 / 6 / 10.5 Nm • Motor speed X/Y/Z: 3000 rpm • Ball screw pitch X/Y/Z: 20x32 / 10x32 / 20x40 mm • Rapid traverse X/Z (slide 2): 30 / 30 m/min • Feed force X/Z (slide 2): 4.0 / 7.0 kN • Positioning resolution X/Z (slide 2): 0.0005 mm • Motor torque X/Z (slide 2): 6 / 10.5 Nm • Motor speed X/Z (slide 2): 3000 rpm • Ball screw pitch X/Z (slide 2): 20x32 / 20x40 mm • Rapid traverse X/Z (counter spindle slide): 15 / 30 m/min • Feed force X/Z (counter spindle slide): 4.0 / 7.0 kN • Positioning resolution X/Z (counter spindle): 0.0005 mm • Motor torque X/Z (counter spindle): 10.5 / 10.5 Nm • Motor speed X/Z (counter spindle): 3000 rpm • Ball screw pitch X/Z (counter spindle): 10x32 / 20x40 mm Redpfoyvz Ibox Aizot • Number of tool stations: 12 • Tool holder: VDI 30 • Tool changer type: Turret • Tool shank size (DIN 69880): 30 / 40 mm • Number of driven tool stations: 12 • Driven tools: all 12 stations capable of driven tools • Driven tool power (40/100% ED): 11.7 / 8.4 kW • Driven tool torque (40/100% ED): 28 / 20 Nm • Driven tool speed: up to 4000 rpm • Tailstock stroke (optional): 300 mm • Tailstock force: 150 / 630 daN • Center size: MK 4 • Hydraulic tank capacity: 20 l • Hydraulic pump power: 2.2 kW • Hydraulic pressure max: 90 bar • Clamping pressure main spindle: 80 bar • Clamping pressure counter spindle: 70 bar • Clamping pressure tailstock: 50 bar

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, color: white, brakes: retarder, number of seats: 23, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily New Vehicle, Prebuilt Chassis in Production, Delivery April 2026. - Length: 7,618 mm - Width: 2,174 mm - Height: 2,900 mm - Wheelbase: 4,100 mm The base vehicle is extensively equipped, including: - Air suspension - Telma retarder - Additional hot water heater - Automatic climate control - 8-speed automatic transmission - ADA systems - Suspension seat with seat heating Conversion and outfitting includes: - Thermal and acoustic insulation Rsdpey Iazqofx Aizjt - Electric external swing door - Webasto RT 145 air conditioning (dual climate control) - Overhead ducting left and right with service sets - Multi-level night lighting - Half podium/no wheel arch inside passenger compartment - Lowered luggage compartment - 22 GRL passenger seats, rear-adjustable with magazine net and folding table - Tour guide seat - USB sockets in every passenger row - Clock in the passenger compartment Net export possible

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm Rodjyw H Szjpfx Aizet - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: used, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2012, loading space length: 13,700 mm, loading space width: 2,500 mm, loading space height: 2,691 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Steel rims, air brake, disc brake, sliding tarpaulins, wing doors, BPW axles, wooden floor, used vehicle Rsdpfey H T Axsx Aizjt Vehicle no. 3041, ABS, EBS, tyres: 385/65 R22.5, rear portal doors with double lock, sliding tarpaulin left & right, support legs, air suspension, wooden loading floor, lashing rings left & right, BPW Eco-Plus axles with disc brakes, right side damaged, see PHOTOS!!, unladen weight: 4,750 kg, gross weight: 35,000 kg. For enquiries please, subject to errors and prior sale.

Condition: used, maximum load weight: 28,710 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2015, loading space length: 13,605 mm, loading space width: 2,483 mm, loading space height: 2,700 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Steel rims, air brake, disc brake, sliding tarpaulin, sliding roof, swing doors, lift axle, toolbox, SAF axles, wooden floor, used vehicle Rodpfsy H T Aljx Aizst Vehicle No. 2996, ABS, EBS, ALB, lift axle, SAF axles with disc brakes, sliding tarpaulins left + right, sliding roof, load securing certificate, 2 x storage boxes, spare wheel holder, tires: 385/65 R 22.5, air suspension with raise/lower function, portal doors with double locking, forklift mount at rear, wooden loading floor, lashing rings, pallet stop strip, Jost landing legs, cargo space dimensions LxWxH: 13,605 x 2,483 x 2,700 mm, 1st hand, subject to errors and prior sale

Condition: excellent (used), power: 51 kW (69.34 HP), Year of construction: 2010, Equipment: 4 in one shovel, cabin, ATLAS AR 65 year 2010 hours : 9.803 hrs. Rjdpfx Aoy Hlq Ieizst ROPS hydr. quick coupler Bucket tyres size 12.5-20: approx. 70% good CE / EPA Deutz engine with 51,3 kW Transport : 5.1 x 2 x 2.7 m operation weight: 5,3 to.

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 Rjdpfx Aoy Egpieizjt If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), functionality: fully functional, mileage: 186,465 km, first registration: 03/2007, fuel type: diesel, overall weight: 48,000 kg, tire condition: 80 %, axle configuration: 8x8, fuel: diesel, color: orange, Year of construction: 2007, operating hours: 23,373 h, Equipment: crane, truck registration, 🔧 Key Specifications Manufacturer: Tadano Faun Model: ATF 65G-4 Year of manufacture: 2007 Type: All-terrain mobile crane Max. lifting capacity: 65 t Redjycwfzopfx Aizet Axles / Drive: 4 axles, 8×8 Main boom: 11.0 – 44.0 m Jib: Swing-away jib 9.0 m / 16.0 m (depending on configuration) Max. lifting height: up to approx. 60 m (depending on configuration) Slewing range: 360° Outriggers: Fully hydraulic Engine: Mercedes-Benz diesel Transmission: Automatic (ZF) Gross vehicle weight (GVW): approx. 48,000 kg Country of manufacture: Germany CE certified: Yes ⏱ Hours & Mileage Chassis mileage: 186,465 km Superstructure hours: 23,373 h ⚙️ Condition Tadano Faun ATF 65G-4 all-terrain mobile crane in good working condition. The crane is fully operational and ready for immediate use. Normal signs of use consistent with mileage and operating hours. 📝 Description 65-ton all-terrain mobile crane with robust 4-axle 8×8 configuration, suitable for demanding lifting operations both on-road and off-road. Equipped with a telescopic main boom up to 44 m and swing-away jib options of 9.0 m and 16.0 m, providing excellent reach and operational flexibility. The crane is fitted with a load moment indicator (LMI), fully hydraulic outriggers, and a comfortable operator cabin with integrated monitoring and safety systems. 📍 Location & Delivery Current location: Bucharest, Romania Delivery: Worldwide delivery available upon request

Condition: new, functionality: fully functional, power: 56 kW (76.14 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 6.5 l/h, fuel tank capacity: 100 l, color: yellow, overall weight: 8,650 kg, empty load weight: 6,741 kg, operation weight: 6,760 kg, tire size: 12.5/80-18, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.2 m³, Year of construction: 2025, operating hours: 1 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, differential lock, gripper hydraulics, hydraulics, low noise, parking heater, standard shovel, traction control, === MAIN SPECIFICATIONS === Year of manufacture: 2025 Operating hours: 0 h Operating weight: 6,741 kg Max. digging depth: 3,795 mm Digging reach: 6,445 mm Rodpfsxrpccjx Aizst Bucket capacity: 0.15 – 0.20 m³ Engine manufacturer: Perkins 404F-E22TA Engine power: 56 kW (≈ 76 hp) Drive: Diesel Type: Wheeled excavator Quick coupler: Yes (Easy Lock preparation) Hydraulic functions: 4 AUX circuits (AUX I – IV, incl. Powertilt, High Flow) Air conditioning: Automatic climate control Cabin: Enclosed, heated Travel speed: 30 km/h Stabilisers: No Tyres: Pneumatic tyres Emission standard: Stage V CE certification: Yes === HIGHLIGHTS === 3-point kinematics for superior digging performance Intuitive operation with ergonomic joysticks Powerful LUDV hydraulic system with four AUX circuits Triple boom for maximum reach and flexibility Overload valve (AUX I) and Powertilt circuit (AUX III) Easy Lock preparation (AUX IV) and electric refuelling pump Automatic air conditioning and heated cabin Fully CE certified and immediately available === CONDITION === New 2025 model – in excellent working condition, fully inspected and tested by certified professionals. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). The Wacker Neuson EW65 combines power, precision, and comfort. Equipped with a Stage V Perkins engine, four auxiliary hydraulic circuits, and a triple boom, this wheeled excavator is ideal for intensive daily use in construction, infrastructure, and urban projects. Fully CE-certified and immediately available via Collé Rental & Sales. === DELIVERY === Crane loading available upon request for smooth transport. Flexible shipping options tailored to your destination and logistics preferences. All transports are handled professionally by the Collé Rental & Sales logistics team.

Condition: good (used), Year of construction: 2011, operating hours: 54,900 h, functionality: fully functional, travel distance X-axis: 7,350 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, table load: 600 kg, rotational speed (max.): 18,000 rpm, Equipment: chip conveyor, Motor spindle SK 40 Tool holder for HSK-A63 Infrared measuring probe ICS 40 bar Electronic handwheel iTNC 530 Rodpfx Aiey Hh T Sozot

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum main spindle speed of 5000 rpm and a maximum main spindle bar diameter of 65 mm. The machine includes two turrets, each with 12 driven tool positions, and a robust coolant tank capacity of 650 liters. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. Contact us for further details. • Total hours: 64274 h; Operating hours: 43196 h • Counter spindle: 17 kW; max speed 5000 rpm; max bar diameter 45 (65) mm • CNC controlled axes: • X1: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z1: stroke 678 mm; rapid 30 m/min; acceleration 5 m/s2 • Y1: stroke 80 (+50/-30) mm; rapid 30 m/min; acceleration 5 m/s2 • X2: stroke 165 mm; rapid 30 m/min; acceleration 5 m/s2 • Z2: stroke 640 mm; rapid 30 m/min; acceleration 5 m/s2 • W2: stroke 690 mm; rapid 30 m/min; acceleration 5 m/s2 • Turrets: 2; 12 driven positions per turret; Tool system VDI 30; Max driven tool speed 4000 rpm • Coolant system: tank approx. 650 l; pump capacity per turret 20 l/min; pressure 7 bar • Power supply: 91 kVA Redoy E Ntkspfx Aizjt • Base machine configuration and functions: • Drive for slide 1 and 2 (all 12 positions) • C-axis for main and counter spindle • Y-axis for slide 1 • Counterspindle collet cleaning with coolant • Mechanical preparation for oil mist filter • Electrical and software interface for bar loader • Angular synchronism between main and counter spindle • Automatic machine shut down • 2 additional on/off outputs (4 M-functions) • Rigid tapping • Piece and time counter • Software for polygonal turning (slide 1 and 2) • Constant cutting speed • Helical interpolation (slide 1) • Spindle speed control • Quadruple warning light • Cooling device for electrical cabinet • Control options: • Tool wear monitoring system (FANUC monitor) • Sister tool selection system (FANUC monitor) Additional equipment • IEMCA MASTER 865 MP 43 L bar feeder • Swarf (chip) conveyor, belt type • Workpiece unloading device including belt • Main spindle collet chuck MPF 65/140 (no axial feed), max Ø 65 mm • Manual collet changer SACO MPT65/140 and MPF65/140 • Counter spindle chuck SMW 175-BBD, incl. adapter • 1 set of soft jaws for SMW 175-BBD • Differential clamping pressure for counter spindle (two selectable pressures) • External flushing of jaws/collets with coolant on main and counter spindle • Various new spare parts available Technical Specification Counter Spindle Yes

Condition: used, mileage: 592,000 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, first registration: 11/2012, emission class: euro5, color: white, brakes: retarder, number of seats: 13, Equipment: air conditioning, navigation system, parking heater, For sale here is a well-maintained Mercedes-Benz Sprinter 516 City 65 EvoBus equipped with the globally popular 2.1-litre diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced Rsdjy Ek Dkspfx Aizjt * Euro 5 emission standard * Complete service history * Replacement engine installed at 286,000 km * 1 previous owner Equipment: * EvoBus body * 13 seats * 15 standing places * Automatic transmission * Air conditioning * Roof-mounted air conditioning unit * Auxiliary heater (parking heater) * Two-leaf external swing door * LED matrix destination display * Telma retarder * Heated driver’s seat * Rear roof ventilator * Heated exterior mirrors * Electric exterior mirrors * Power windows * Central locking * and much more... Technical data: Permissible total weight: 5,650 kg * Unladen weight: 3,810 kg Why choose us? Attractive financing through our partner bank * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit license plates (5-day/customs plates) usually available the same day * Pick-up service from airport or train station All vehicles are professionally detailed and hygienically cleaned! Highlights: interior and ventilation system disinfected using ozone treatment; 2-stage exterior polishing * If required, paint correction and smart repair available All our vehicles have also undergone thorough mechanical inspection. Of course, this includes new fluids, filters, and other necessary maintenance that you shouldn’t have to worry about. Optionally, we can present the vehicle for inspection at an independent testing centre or workshop of your choice. We appreciate your interest and are available around the clock to assist you. If you have any questions, comments, or special requests, don't hesitate to contact us! For more information and insights into our business philosophy, visit

Condition: like new (used), Year of construction: 2012, round bar steel 45 mm square edge steel 45 mm L-beam 120 x120 x 12 mm total power requirement 5,5 kW weight of the machine ca. 1600 kg Rjdpfxey Hxq Ij Aizst dimensions of the machine ca. 1700 x 950 x 1900 m

Condition: new, cutting range for steel to 35.0 TS mm cutting range for steel to 25.0 QS mm ampere 20 - 65 Ampere cutting medium Druckluft voltage 400 V output Eingang 7.8 KW weight 51.5 kg range L-W-H 595 x 250 x 890 mm Avalon 65 AIR with integrated compressor Cutting - clean and reliable The Avalon 65 AIR air plasma cutting system with integrated compressor compressor is your reliable partner for demanding applications. use. With the Avalon 65 Air, you can make cuts up to a material thickness of material thickness of 35.0 mm. Features : - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic . Arc characteristics - CNC interface - HF-free arc starting system for increased reliability . and low EMF exposure - Manual switch for activating the air flow to set the test air pressure . without having to trigger the torch - Intelligent protection function protects the plasma torch . from damage such as incorrect air pressure missing wear parts , . overloading of the pilot arc. * max. cutting thickness carbon steel = 35.0 mm (separating cut) * Optimal cutting thickness carbon steel = 25.0 mm (quality cut) * Stainless steel = 25.0 mm * Aluminum = 20.0 mm * Copper = 14.0 mm Special equipment included : - 1x 3.0 m / ground cable Rjdpfx Asxaaiceizst - 1x 6.0 m / hand cutting torch "IPT-60 Coax" * Hand torch 70° * 6.0 m hose with rubber cover

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, Rjdpfx Ajy E Np Soizjt 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", *