Used Pad Printer for sale (3,889)

Condition: not inspected (used), Dear Sir or Madam We hereby offer you the following device for sale: Njdpswktwkefx Ab Rslh Keyence Agilista 3200W 3D printer. The machine is sold with the equipment documented in the photos and recorded in the advert text. Location: 40764 Langenfeld ATTENTION: The device comes from an insolvency. We are auctioning it for the highest bid on behalf of the creditor/bank. This is a closed auction. We do not give any information about the current highest bid. Your bid becomes binding upon receipt by e-mail. Please inform us of your binding bid by 07.12.2025 at 10 am. You will be informed of the outcome of the auction within 72 hours of the end of the auction.

Condition: used, Year of construction: 2023, Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Nodpfxoz Sp Ans Ab Rolh Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania

Condition: used, Year of construction: 2014, Maximized productivity with two heads and two autoloaders. The exclusive design of hopperfeeders (Pade patent) allow the manual loading of the pieces without any barrier in front of the operator. The piece-holder magazine can be easily “parked” to the side to allow the manual loading of the pieces. Pneumatic clamps with locking from bottom to top that can be easily positioned on the TANDEM pods in order to quickly change the configuration from manual to automatic loading. Main features: - Working heads with the possibility of choosing between 1, 2 and 4 spindles - 2 working tables with pods, vacuum table or combined with customizable dimensions - Possibility to add single or multiple clamping systems and CNC lathe - Automatic workpiece loaders with magazine - E-LAB programming system, automatic trajectories manager Main functions: - Mortising - Drilling Nedpfx Aexw Ty Neb Rslh - Milling - Cutting - Tenoning

Condition: used, Dürkopp Adler 540-100 buttonhole sewing machine First-class seam quality and exceptional flexibility – this is the new Class 540-100. The new cutting system eliminates the need for a blade change when adjusting buttonhole lengths. Thanks to the free programming options and a sewing area of 6 mm x 70 mm, the possible applications are virtually limitless. A simple push of a button allows for fine adjustment of the buttonhole to suit different materials. The optimized sewing kinematics ensure excellent stitch quality, even with critical fabrics. A new frame allows for both longitudinal and transverse installation, resulting in optimal workstation design. The reduction in mechanical parts makes the machine even more service-friendly. -Shirts: For sewing buttonholes. -Trousers: For buttonholes on the waistband and other areas. Nsdpfx Aez Rzc Dob Rslh -Jackets and suits: For precise buttonholes. -Blouses and dresses: For clean and uniform buttonholes. -Polo shirts: Depending on the material and machine configuration. • Max. speed: 4,000 stitches/min. • Memory for 50 buttonholes and 2 freely programmed buttonholes • 20 sequences with up to 9 buttonholes per sequence

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Nledpfx Asygw S Aob Rjh

Year of construction: 2020, condition: ready for operation (used), Offered is an extensive machinery package for textile processing, automatic cutting, laser cutting, industrial sewing, die cutting and riveting. 1) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow rate: 320m³/h. 2) Single-needle lockstitch flatbed sewing machine with triple feed and large vertical-axis hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 3) Single-needle high-speed lockstitch sewing machine Juki DDL-9000B-SS, year of manufacture: 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 4) Single-needle high-speed lockstitch sewing machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control unit: AHE59. 5) Post-bed sewing machine Pfaff 591-900/81-BL. 6) 2 identical swing-arm cutting presses Moneus 1333. 7) Manually operated riveting and setting machine with mechanical foot actuation. Documentation available. Inspection possible by arrangement. Nljdpfxozt Skxs Ab Roh

Condition: good (used), input voltage: 220 V, Durkopp adler 868-190322 Classic 3-transport post-bed machines, 1 needle Durkopp adler 868-190020 Nedeh T Ax Ejpfx Ab Relh 3-transport post-bed machines, 1 needle

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, Professional Two-Needle Post Bed Machine DÜRKOPP ADLER 868-290020 M-TYPE (ECO Version) For sale is a top-class, industrial post bed machine from the renowned German brand Dürkopp Adler, model 868-290020 from the prestigious M-TYPE series. Manufactured in Europe (Czech Republic), guaranteeing the highest quality of workmanship and legendary component fit. The machine is in very good visual and technical condition – well-maintained, clean, fully functional, and ready for immediate use. 🌟 Key advantages of this unit: 🤖 Operator panel and automatic locking: The machine features automatic start and end locks controlled from an advanced control panel. The machine automatically and precisely secures the stitch to prevent unraveling, which significantly speeds up the sewing process, guarantees repeatability, and saves thread. Nljdpfx Abs Adl H Ee Rjh Precise 3 mm needle spacing: A very dense, elegant, and desirable spacing. Ideal for luxurious edge stitching, delicate upholstery, and premium leather goods. The machine is equipped with a complete, original sewing set and is immediately ready for operation in this configuration. Powerful stitch length up to 12 mm: Allows for both standard construction seams and beautiful, very long decorative stitches, which are highly desirable in modern upholstery. Adjustable presser foot stroke up to 9 mm: The machine has manual adjustment of the presser foot stroke height. This allows it to “climb” and smoothly move over material thicknesses, transverse seams, or multiple layers of leather without slowing down or losing the stitch. Triple transport (feed dog, needle, presser foot): A robust mechanism that easily handles the heaviest materials. The machine sews perfectly evenly, without puckering or shifting the material layers – indispensable for thick leather, artificial leather, and upholstery fabrics. ECO version – Reliability and simplicity: A design devoid of complex electronics and pneumatics, eliminating the risk of costly failures of computer components. This machine is designed for trouble-free, long-term operation, in which the operator has full, manual control over each stitch. Energy-efficient motor with needle positioning: A modern drive provides quiet operation, high performance, and drastically reduced power consumption. The motor is equipped with an automatic needle positioning function, which significantly speeds up and simplifies the work (the needle always stops in the desired position, e.g., embedded in the material when turning the component). Application: The machine is ideal for professional workshops and production lines involved in: Automotive upholstery (seats, door panels, steering wheels, dashboards) Furniture upholstery (sofas, armchairs, mattresses) Heavy leather goods (bags, suitcases, belts, shoes) The machine is prepared for operation with a 3 mm spacing. For a decisive customer, there is also a technical possibility of configuring it for an 8 mm or 16 mm spacing. Delivery to the customer by courier is possible.

Condition: used, functionality: fully functional, machine/vehicle number: 570150, Year of construction: 2015, operating hours: 10,018 h, Stratasys Objet Connex 500 3D Printer (Purchased April 2015) A complete set of instruction manuals and safety data sheets for printing and cleaning materials is included. Nljdpfx Ajy S Rp Hjb Rsh Spare Components: 2 x polyjet print head spares (new) 2 x thermistors (bagged) 1 x new bulb 1 x used bulb (left) – 3610 hours of use 1 x used bulb (right) – 4539 hours of use 2 x Assy Wiper Leaf (used) 2 x Roller Bath Blades Kit, Filter & Accessories – several items bagged together 1 x Eden MCB – in good condition 4 x Support Cleaning Fluid (1 x OBJ-03216, 3 x OBJ-03214, all expire in February 2026) The unit was decommissioned by the authorized service contract team in July 2023 and no longer has a current service contract.

Year of construction: 2010, condition: repair required (used), functionality: limited functionality, controller model: MTT AutoFab, inner dimension height: 250 mm, laser power: 400 W, machine/vehicle number: SLM2501004, laser type: fiber laser, Equipment: dust extraction, No reserve price – guaranteed sale to the highest bidder! Note: The machine is in visually clean condition. It is also technically complete and the laser has been replaced by the manufacturer. However, the printer has limited functionality with regard to focus quality at the edge areas, which is presumably due to the optics and therefore requires adjustment or repair. TECHNICAL DETAILS Process: Selective Laser Melting (metal 3D printing) Laser: IPG fiber laser (replaced by manufacturer) Laser power: 200 W Total power: 400 W Maximum power: 900 W Adjustable output power: 10 - 105 % Long-term output stability: ± 3 % Beam quality: < 1.1 M² Wavelength: 1,075 ± 5 nm Spectral linewidth FWHM: < 3 nm Maximum modulation frequency: 50 kHz Build height: 250 mm Shielding gas operation: Argon/inert gas Cooling: water-cooled Cooling temperature: < 30 °C MACHINE DETAILS Laser type: YLR-200-WC Electrical voltage: 85 / 240 V AC Current: 15 A Laser hours: 0.1 h Pump runtime: 2,644 h Power-on hours: 5,017 h Heating power: 1,000 W Nominal temperature: 18 - 30 °C Air pressure: 6 bar Ambient temperature: 0 - 45 °C Dimensions & Weight Dimensions (W x D x H): 3U 19" rack Machine weight: 60 kg Nodpfjy H Hxyox Ab Relh EQUIPMENT • Powder System PSH 100 • Extraction and filtration system • Chiller unit • 5x powder bottles (5 L) • 6x substrate plates • 10x filter elements (H13) • 26x wiper lips • Spare sieves • Protective suits • Cleaning wipes for optics (F-theta) • Various small parts & spare components

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 28.22.0079, Year of construction: 2022, operating hours: 6,700 h, overall weight: 1,870 kg, laser power: 700 W, operating pressure: 8 bar, inner dimension height: 365 mm, inner dimension length: 280 mm, No minimum price – guaranteed sale to the highest bidder! The system has been serviced annually by SLM Solutions. Service reports and machine assessment are available upon request. The system includes the “SLM280 2.0 complete material change kit incl. PSM100” and a second set of filter housings, minimizing the effort required to switch between two materials. TECHNICAL DETAILS Laser power: up to 700 W Materials: suitable for all common materials in the SLM process Temperature range: 20–25 °C Relative humidity: max. 60 % Floor unevenness: max. 5 mm/m² Floor load capacity: min. 2,200 kN/m² Floor surface: antistatic, solvent-resistant, impermeable to liquids, smooth Processing area and process data Build volume (L x W x H): 280 x 280 x 365 mm Actual build rate: up to 113 cm³/h Variable layer thickness: 20–90 µm Minimum feature size: 150 µm Beam focus diameter: 80–115 µm Scanning speed: max. 10 m/s Laser type: IPG fiber laser Single laser 700 watts Media supply Operating pressure argon: 7–8 bar Operating pressure nitrogen: 7–8 bar Operating pressure compressed air: 7–8 bar Operating pressure cooling water: 4 bar Compressed air quality: ISO 8573-1:2010 [1:4:1] Volume flow rate primary circuit: 1.4 m³/h Cooling water inlet temperature min.: 18 °C Cooling water inlet temperature max.: 20 °C Cooling medium: Coolflux MACHINE DETAILS Control system: SLM MCS Electrical connection values Connection: CEE 3/N/PE Voltage: 400 ±10 % V Frequency: 50/60 Hz Current draw: max. 40 A Connected load: 3.5–5.5 kW Heating power: 1,200 W Cooling power: 4.6 / 5.8 kW Largest motor: 7.5 kW Dimensions & weight Dimensions (L x W x H): 2,600 x 1,200 x 2,700 mm Shipping weight: 1,870 kg Operating hours: approx. 6,700 h EQUIPMENT Cooling is provided by “Cooling unit HRS050 L/W” Sieving station PSM100 V3 Nedpfxey Rn A Ie Ab Rjlh Handling device BPH280 and bottle lift (facilitates handling of powder containers and removal of substrate plates after printing) SLM280 2.0 complete material change kit incl. PSM100 Powder containers Substrate plates (1.2709 & AlSi10Mg) Additional filter housings Filter elements The system is currently still in operation and can be inspected by appointment. After the auction, the system will be disassembled by the machine manufacturer, loaded onto the company premises, and handed over to the buyer.

Condition: excellent (used), We are offering a large quantity of very lightly used Dürkopp Diana roll adapters with transponders. As can be seen in the pictures, the roll adapters are in very good condition and show no signs of wear. QUANTITY-BASED PRICING per unit – Stock quantity: 100,000 units 1 - 50 units: €5.00 net 51 - 100 units: €4.60 net 101 - 250 units: €4.20 net 251 - 500 units: €4.00 net 501 - 1,000 units: €3.80 net Nedpfsz Ahkgox Ab Rjlh From 1,000 - 5,000 units: €3.60 net From 5,000 units: price upon request PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your specific requirements. TRANSPORT & INSTALLATION We will gladly assist you with the transport and installation of the goods. TERMS OF PAYMENT Payment terms will be agreed upon in the event of an order. The price is understood to be the unit price/net price, or as specified in the product description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals with new and used products in the fields of warehouse logistics, material handling technology, warehouse shelving, textile storage, as well as machines for retail, industry, and trades. We continuously offer attractive used products from various manufacturers/brands at competitive prices. If you have any questions, please do not hesitate to contact us. Win-win – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: excellent (used), We are offering this AFINIA L801-01 color label printer, which is in very good condition, purchased in 2022, and hardly used. Includes a spare printhead. Input voltage: 100 - 240 V Nledszaampopfx Ab Rsh Input current: 2.4 - 1.0 A Frequency: 50 / 60 Hz Maximum power: 200 W If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2026, Single-needle chainstitch Nodpsyzxcmefx Ab Rolh - 3-way feed (needle, presser foot, feed dog) - electromagnetic thread trimming - electropneumatic thread tension - electropneumatic backtacking and presser foot lift

Year of construction: 2011, condition: used, Operational unit. Recently taken from the production! Njdsyh Ha Nopfx Ab Rjlh

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,300 h, No reserve price – guaranteed sale to the highest bidder! Auction of a complete additive manufacturing production facility comprising several metal printers, sintering and washing units, as well as additional composite printers! The offering includes the following components: 3 Metal X Nljdpfsyc Ub Tsx Ab Reh 1 Sinter II 1 LMI Washing Unit 1 Mark Two Plastic Printer 1 OnyxOne Plastic Printer MACHINE DETAILS Operating hours: 3,300 h EQUIPMENT - Regularly serviced and maintained - Intuitive operation via touch displays - Software for print preparation and completion - Processing of a wide range of metal materials - Complete solution from design to finished component - Easy integration into existing setups

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 556 h, total length: 483 mm, total height: 914 mm, total width: 584 mm, type of input current: DC, overall weight: 48 kg, warranty duration: 16 months, feed length X-axis: 330 mm, feed length Y-axis: 270 mm, feed length Z-axis: 200 mm, For sale: Markforged X7 industrial 3D printer – in excellent/like-new condition We are offering a Markforged X7 industrial composite 3D printer for sale, purchased in 2024, with only 557 operating hours. This means the unit has seen very little use and is in outstanding condition. The machine comes with a valid manufacturer’s warranty. All consumables supplied at the time of purchase (in original drum packaging) are present, along with all original accessories, documentation, and packaging. Key features: Model: Markforged X7 Year of purchase: 2024 Operating hours: 557 hours Condition: used, excellent / like new Nsdpfx Abeydmnbe Rslh Warranty: valid Accessories: full, factory Materials: complete set in packaging Original drum packaging The Markforged X7 is an ideal solution for industrial prototyping, functional parts, tooling and fixtures, where high strength, precision, and reliability are essential. The machine can be inspected, tested, and is ready for immediate commissioning upon request.

Condition: new, functionality: fully functional, machine/vehicle number: 1325, Year of construction: 2026, Robust, efficient, and user-friendly 3D printer for producing components from resin, rubber, PLA, ABS, PET-G, and other plastics. Njdpexfq Dbjfx Ab Rslh Operates on three axes (X, Y, Z), enabling the creation of precise, three-dimensional details. 3D Printer 1325 3D Printer STANDARD EQUIPMENT INCLUDES: - Complete control system - Print head - Dryer and granulate feeder - Software TECHNICAL DATA: - Output from 8 kg/h - Interchangeable nozzles ⌀ 3–12 mm - Air-cooled print head - Compact print head dimensions - Motor power 1.5 kW

Condition: like new (used), Durkopp Adler 867-290142M Triple feed XXL hook Nodpfxevv E Dno Ab Relh 2 needles (5/6/8/10/12...mm) automatic Durkopp Adler 867-290122M Triple feed 2 needles (5/6/8/10/12...mm) automatic Durkopp Adler 867-290322 Triple feed 2 needles (5/6/8/10/12...mm) automatic Durkopp Adler 767 Triple feed 2 needles (5/6/8/10/12...mm) automatic

Condition: excellent (used), winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: DIEPA Drahtseilwerk Dietz, crane rope winch rope Ø 22 mm -Rope type: DIEPA X 43 Ø 22 mm RHOL 1770 with 1 end with full thimble, see photos -Length: 44 m -Number: 4x wire rope available Nlsdpfovxf Iljx Ab Rsh -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 700 x 510 mm -Weight: 120 kg / piece

Condition: good (used), Year of construction: 2009, I sell the widebelt sanding machine Costa SA1 TT 1350, year 2009. Configuration: 1pc. electronic segmented pad 1pc. electronic segmented pad 1pc. cleaning unit. Working width 1350mm Nlsdpfxsvxlg Is Ab Rsh Bands 1380x2620mm Pressure rollers for short elements. Air-blow on both units. End brushing unit with dust extraction. Total weight 3400kg Designed for the line, with fixed working height and moving aggregates. 2 motors, total power 31 kW Including documentation. Condition very good. Available immediately.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 91160677-0-001, Pasteurizer in excellent condition, worked in a winery Nodpfx Asvq Snisb Rolh

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 70 h, total length: 2,200 mm, total height: 2,600 mm, total width: 1,600 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 230 V, input current: 10 A, compressed air connection: 6 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, volume flow: 15 m³/h, We are offering this used 5000 Massivit 3D printer (only 70 operating hours), year of manufacture 2023. Supply voltage: 220/380-240/415 V Connection type: 3W+N+PE Nlodpfx Abeyvhube Roh Rated current: 10 A Frequency: 50/60 Hz Short-circuit current: 5 kA Air pressure: 6-8 bar Air flow: 250 L/min Weight: 2500 kg If you have any questions or require more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, Dürkopp Adler 868 ECO – 8 mm Needle Distance – New – Ho Hsing G60 Motor – Direct from Stock – €5,000 excl. VAT For sale: brand new Dürkopp Adler 868 ECO, available immediately from stock. ✔ New / unused ✔ Basic single-needle industrial machine – simple operation, only needle position adjustable ✔ 6 mm needle distance – ideal for standard stitching requirements ✔ Powered by Ho Hsing G60 motor – quiet, powerful, and reliable ✔ Suitable for leather, textiles, upholstery, and medium to heavy materials ✔ Robust and durable – built for long-term professional use ✔ Premium German engineering from Dürkopp Adler ✔ Ready for immediate use in workshops or production Special price for quick sale: €5,000 excl. VAT First come, first served – available immediately For more information or to arrange a viewing, feel free to send a message. Keywords: industrial sewing machine for sale Nlodpfx Aoyri I Hjb Rjh industrial sewing machine wholesale sewing machine supplier professional sewing machines industrial sewing machine used industrial sewing machine sewing machines for businesses

Condition: good (used), Pad printing machine TampoPrint rapid 2000/90 Manufacturer: TampoPrint AG Model: rapid 2000/90 Machine type: Pad printing machine Series: rapid 2000 Nljdpfx Ajytp Trjb Reh Country of manufacture: Germany Control: integrated electronic machine control Control panel: digital control panel with display Emergency stop switch: present CE marking: present Location: Freiburg