Used Pall Seitz Kieselgur Frame 600X600 - 40Mm Va for sale (14,105)

Condition: excellent (used), C-Frame Press, Electric Press, Servo Press, Electric Press Tox Ecoline CMB008.407.A.001, Tox Ecoline CMB008.407.A.001, Used Machine Manufacturer: Tox Model: CMB008.407.A.001 (Ecoline) Year: 2011 Weight: 900 kg Overall Dimensions: 1250 x 1400 x 2610 mm Dcjdpouccicofx Adron Pressure: 5500 kg Stroke: 300 mm Max Speed: 200 mm/s We are offering a high-quality servo press that is the ideal solution for all precision and high-performance industrial tasks. This press provides exceptional advantages in both productivity and quality, making it the perfect choice if you are looking for a reliable, energy-efficient, and cost-effective solution. High Precision: The servo press ensures precise control, allowing for repeatable and accurate operation, with tolerances down to micrometers. Energy Efficiency: It consumes significantly less energy compared to traditional hydraulic presses, enabling more cost-effective long-term operation. Quiet Operation: Operates with low noise levels, creating a more pleasant working environment. Flexible Application: Versatile use across various industries, from automotive to fine mechanics. Programmable motion profiles allow for quick and easy reconfiguration for different tasks. Maintenance-Friendly: Minimal maintenance requirements, a reliable, long-lasting machine that leads to less downtime.

Condition: good (used), 21-26- Hydraulic press KALLESOE (used) Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Dedpfsuctlnjx Adrscn Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), Year of construction: 2007, Window fitting press Dsdpet T Srpefx Adrecn

Condition: good (used), End mill, shank mill, milling cutter -Four-cutter -Roughing end mill -Diameter: 32 mm -Usable length: 40 mm -Corner radius: 4 mm -Type: HSSE -Quantity: 17 pieces Dcodpfxob A Rbfs Adrjn -Sale: only complete set -Weight: 10 kg

Condition: new, Year of construction: 2024, manual hydraulic frame and edge press 1-sided, stationary > strong welded steel frame > frame pressing system with continuous counter pressure beam on the left side > 1 movable slide (machined surface) for horizontal calibration of width, adjustable in 50 mm increments; with bolt for central locking > 2 manual hydraulic cylinders, horizontal adjustable, pressing strength of 20.000 N each and stroke of 60 mm > 5 vertical pressing units on ball bearings in galvanized structural steel with manual hydraulic cylinders, pressing strength of 20.000 N and stroke of 60 mm pressing units adjustable in 50 mm increments; bearings adjustable six fold and with drop out safety lock; bearing and pressure plate: 40 mm long and 80 mm deep > 1 zinc-plated adjustable hold-down bar with screw clamp, manual to be unhinged > painting: grey-white RAL 9002, abutment and pressing plate blue RAL 5010. > also available with more or less vertical pressing units art.no. Q 007 (as listed in accessories and options) working space as frame press (w / h in mm): 2700 x 1800 working space as edge press (w / h in mm): 3000 x 1800 Dsdpfx Adeyuxksrecn overall dimensions (w / h / d in mm): 3340 x 2350 x 730 Price additional packaging costs 92,- netto

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm Dcsdpfx Adobb Tgujrjn weight: 1800 kg

Condition: like new (used), functionality: fully functional, mileage: 99,300 km, power: 110 kW (149.56 HP), fuel type: diesel, maximum load weight: 980 kg, next inspection (TÜV): 01/2027, color: white, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, car registration, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, MERCEDES SPRINTER T43/35 315 RWD CURTAIN SIDE PAYLOAD 980 KG AUTOMATIC CLIMATE CONTROL - CRUISE CONTROL - BLUETOOTH - CAR RADIO ONE OWNER NEW ENGINE REPLACED BY MERCEDES UNDER WARRANTY WITH INVOICE €26,500 + VAT 22% = €32,330.00 LEASING AND CUSTOMIZED FINANCING OPTIONS AVAILABLE ALSO WITHOUT DOWN PAYMENT, WITH SMALL INSTALLMENTS AND FINAL BALLOON PAYMENT, TRADE-INS AND VEHICLE SCRAPPAGE POSSIBLE Djdoy Dh I Rjpfx Adrocn Mileage CERTIFIED both on the contract and on the invoice. Despite every effort to accurately indicate all features of the vehicle offered, some discrepancies in the listed accessories and/or photographs may occur. We therefore invite you to check the description with one of our consultants, who are at your disposal for any further information.

Condition: used, functionality: fully functional, Used shaft frame lifter from Zagro, fully functional. Dedpfx Aezg T U Ejdrscn

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW Dsdpszxup Isfx Adrjcn

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Dcjdjy Hqz Sspfx Adron Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: used, Meassuring frame for logs and timber type Rema 9001 Maximum meassuring field 700 mm Dsdpfxozd Azvs Adrjcn

Year of construction: 1991, condition: good (used), functionality: fully functional, machine/vehicle number: 505591, SCHMALZ Vacuum Lifter Lifting capacity: 250 kg Dodpfx Adszhigmsrocn Maximum panel dimensions: 560 x 250 cm

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Dodpfx Aeh Uhqyedrocn Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Dcodpfjh U Dtuox Adron Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: used, Single-column – Eccentric press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture 1962 Pressing force 63 tons Stroke 260 mm Table area 630 x 530 mm Dsdsk S Htxspfx Adrjcn Table opening Ø 210 mm Slide area 315 x 260 mm Adjustable slide stroke 8-100 mm Slide adjustment 63 mm Tool holder bore Ø 40 mm, with clamping piece Installation height max 450 mm Stroke rate 115 strokes / min Compressed air requirement min. 4.5 bar Motor power 4 kW Power connection 380 Volt, 50 Hz Table height above floor approx. 750 to 900 mm - Electrical stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination by WEINGARTEN friction-thread clutch with top dead center through-drive protection - Front crankshaft support bearing - Press table adjustable in height via 2 threaded spindles - Manual centralized lubrication - Control cabinet positioned beside the press - UVV (German trade association for accident prevention) for manual feeding operations Space requirement L x W x H 1750 x 1600 x 2430 mm Weight 4.5 tons Good condition

Condition: used, Hydraulic punching machine, punching frame for use with JOKA HP-S punching units Hydraulic hole punching machine, hydraulic press for punching tools Year of manufacture approx. 1995 Pressure capacity: 5 tons Stroke: 155 mm Stroke length: approx. 20 mm Punching unit width: max. 54 mm Punching unit height: max. 220 mm Die holder: Ø 48 mm Dedpfxeltrmus Adrscn Motor power: 1.5 kW Mains connection: 230 volts, 50 Hz - for universal use with JOKA SW 20 or SWD 20 punching units - The outreach of the punching units can be larger and can be pushed back - Stroke activation via electric two-hand operation - Hydraulic unit HAWE, type HCW 4 / 2.5-B 1/400-1 - mounted on a frame base, mobile Space requirement L x W x H: 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, Drill grinding machine GÜHRING, Type SS 15 Dcododzp Tbspfx Adren Spiral drill grinding machine Manufacturer's No. 909, Year of manufacture approx. 1977 Drill diameter max. 40 mm Grinding wheel diameter, right 300 mm Grinding wheel diameter, left 250 mm Grinding wheel width 40 mm Grinding spindle speed approx. 2800 rpm Motor power approx. 2.2 kW Power connection 380 Volt, 50 Hz - Point angle infinitely adjustable - Tapering device - Gear motor for vertical oscillation in front of the cup wheel - Diamond dressing holder - Various drill chucks - Coolant system Space requirement L x W x H 1200 x 950 x 1550 mm Weight approx. 1150 kg

Year of construction: 2023, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H34008-HW, Welding System for Frame Welding of Tinplate Cans with Comprehensive Peripheral Equipment! The new price of the machine was CHF 800,000! The system comprises the following components: - Can Man X7-300 WeldCenter (Serial no.: H34008-HW) - Sheet Transfer and Storage System PowerFEED (Serial no.: H31723) & PowerSTORE (Serial no.: H31503) - Induction Oven PowerCURE (Serial no.: H33620-HS) - Goudsmit Magnetics Palletising Magnet TPLC12804 - BASCO Leak Tester PRE 1024 GLX - Hyfra SIGMA 28-S Chiller Further configuration details can be found in the attached document. Can Man X7-300 WeldCenter TECHNICAL DETAILS (according to manufacturer) - Production output: 100 – 600 pcs/min - Strip speed: 10 – 100 m/min - Sheet thickness: 0.10 mm – 0.28 mm Can body dimensions: - Min. can body dimensions: Ø 52 x 50 (height) mm - Max. can body dimensions: Ø 153 x 320 (height) mm Goudsmit Magnetics Palletising Magnet TPLC12804 TECHNICAL DETAILS - Product diameter: 65 mm – 230 mm - Product weight: max. 5 kg - Pallet size: 1,200 x 800 mm MACHINE DETAILS - Magnet dimensions: 1,226 x 826 mm Pneumatics: - Working pressure: 6 – 8 bar - Air consumption: 8 L/stroke Ambient temperature: -20°C to 40°C Robot interface: Available Vacuum system: Integrated EQUIPMENT - Interface for robotic arm - Integrated vacuum system for handling sheets between can layers - Perforation pattern for robotic arm - Magnet plate (2x) - Vacuum connection (1x) - Pneumatic tubing (3x) - Sensor connection box Hyfra SIGMA 28-S Chiller MACHINE DETAILS Dimensions & Weight: - Dimensions (L x W x H): 715 x 715 x 1,554 mm - Weight: 210 kg EQUIPMENT - Tank volume: 120L - Scroll compressor - Stainless steel frame construction - Automatic water make-up Dcsdpfx Ajymxlqedren - Bypass valve - Water level indicator - Pressure gauge in water supply - Dry-running protection pump - Ball valve for tank drainage - Fault indication with digital display - High-efficiency condenser - Metal filter cells

Condition: ready for operation (used), functionality: fully functional, drilling capacity: 22 mm, throat depth: 370 mm, table length: 1,800 mm, drilling depth: 120 mm, rotational speed (max.): 3,600 rpm, TECHNICAL DETAILS Drilling depth: 120 mm Drilling capacity: 22 mm Throat depth: 370 mm Number of drilling units: 4 Power: 4.4 kW Table type: Fixed table Table dimensions: 1,800 x 500 mm Main spindle power: 1.0 kW Spindle speed range: 345 - 3,600 rpm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,900 x 1,000 x 1,900 mm Net weight: 1,500 kg Dcedpfoy Hg E Tox Adren Transport packages: 1 EQUIPMENT Documentation Conventional control

Condition: used, Year of construction: 2019, Base frame, carousel and swing arm of a Kuka KR 360 R2830 industrial robot with: Dodpjx A D Rcsfx Adrjcn - Axis 2 motor: Siemens 1FK7105-5AY81-1YY3-Z - Counterbalance GA16

Condition: good (used), machine/vehicle number: 2823, Year of construction: 2011, total length: 12,000 mm, total width: 2,400 mm, SHT LIFTING FRAME 40" from Uniktruck Dedpfxeyuhvuj Adrecn

Condition: good (used), functionality: fully functional, grinding length: 500 mm, grinding width: 350 mm, total height: 2,350 mm, total length: 2,400 mm, total width: 1,900 mm, table length: 900 mm, table width: 300 mm, For sale is an ELB surface grinding machine, model SW 5 VA 1, manufactured in 1972 (machine no. 112630972). It is equipped with a robust hydraulic table drive and, despite its age, is in remarkably well-maintained and immediately operational condition. Technical data: Grinding length (X-axis): 500 mm Grinding width (Y-axis): 350 mm Workpiece height (Z-axis): 300 mm Table clamping area: 900 x 300 mm Magnetic plate: 500 x 250 mm or 400 x 200 mm Table speed: 2 – 25 m/min Grinding wheel dimensions: Ø 300 x 50 x 76 mm Spindle speed: 2,800 rpm Spindle drive power: 4.5 – 5.5 kW Dimensions & Weight: Footprint (L x W x H): approx. 2,400 x 1,900 x 2,350 mm Machine weight: approx. 2,500 – 2,700 kg Hydraulics: Stepless longitudinal movement of the table for optimal grinding results. Transverse feed: Automatically and manually adjustable. Vertical feed: Manual handwheel feed (fine feed). Documentation: Original operating manual available. Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices are exclusive of VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying/selling Dodpszbrykjfx Adrscn PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website.

Year of construction: 2012, condition: used, Attachment suited for: Loading and unloading machines Please contact Sales Team for more information Djdeydmzzjpfx Adrjcn

Condition: excellent (used), functionality: fully functional, Stromab STA 2500 pneumatic assembly press Dodpfx Adszhv Tyerecn Working length: 2500 mm Working width: 1200 mm Clamping force at 8 bar: 2600 kg 2x side clamping Pneumatic control CE certified

Year of construction: 2026, condition: new, Machines for the mass production of beehive frames, including cutting, milling, and drilling of components. Dcodpfxszl N Dgj Adrsn