Used Paso Micro for sale (795)

Condition: good (used), Year of construction: 2016, functionality: fully functional, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2016 Controller: IMSNC Cutting table: 3000 x 1500 mm Extraction channel left/right Plasma source: Kjellberg HiFocus 161i, adjustable 10 – 160 A Power Source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process management with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short-circuit time during torch ignition, and the power source • Display of operating statuses and error messages via LED and display • Analog and serial interface for adaptation to CNC controls • Infinitely variable adjustment of cutting current from 10–160 A; marking current from 5–25 A • Optimal piercing due to stepless delay time for main arc and adjustable current rise • Adjustable current reduction at corners, as well as at start and end signals from guidance systems • Automatic display of preset cutting current • Serial data transfer for PC-based diagnostics Plasma Cutting Technology Contour Cut • Further development of HiFocus technology for carbon steel • Optimized for cutting fine internal and external contours • High cut quality and contour precision • Holes with angle tolerances according to DIN EN ISO 9013 within range 2-4 • Low angle deviation and smooth cut surfaces • Very good repeatability and dimensional accuracy • No time-consuming post-processing—high productivity, reduced costs • No additional equipment or software required, and no new wear parts necessary • Supplied as standard Plasma Torch PerCut 200/210 • PerCut 200 machine plasma torch for standard applications and high-precision bevel cutting • Quick-change torch PerCut 210 with threaded connector for fast and comfortable setup • Special torches available for custom applications • Higher cutting speeds reduce cost per meter cut • Long service life of consumables conserves resources • Narrower kerf for less emission and waste • Significantly lower gas consumption compared to the competition through efficient liquid cooling up to the nozzle tip • Lower noise level due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Technical Data: Power source: HiFocus 161i Connection voltage: 400 V; 3-phase; 50 Hz Max. power consumption: 28 kVA (100% duty cycle) Line fuse: 50 A (slow-blow) Protection class: IP 22 Open circuit voltage: 330 V Cutting current: 10–160 A (100% duty cycle) Marking current: 5–25 A (100% duty cycle) Dedeyzy S Aopfx Ad Njcg Cutting range: max. 50 mm, recommended 0.5–38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma Machine Torch: PerCut 200 Quick-change torch: PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, air, N2/H2 (F5)

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type automatic lathe Make: STAR Model: SR-32 Year of manufacture: 1999 Dsdpfxoyzyr No Ad Nocg with: FANUC 16-T control Backworking capability Synchronous spindle Driven tools C-axis Bar loader magazine FMB TURBO 5-42

Condition: excellent (used), Year of construction: 2021, Control Fanuc 32I-B, bar capacity 32mm, maximum cutting diameter 32mm, maximum cutting length 310mm, maximum drilling diameter 13mm, maximum tapping capacity M12, Dcedpfsw Rct Hex Ad Neg milling speed 5,000rpm, spindle speed 7,000rpm, Sub spindle C axis 0.001 degree, FMB Turbo 3-36/3200 barfeed, number of controlled axis Z, ZB, X, XB, C1, C2, Y. swarf conveyor,

Condition: good (used), Year of construction: 2005, 1 used, well-maintained high-performance cycle lathe with FAGOR 8055 control, 8-position VDI 40 tool turret, constant cutting speed, pneumatic 3-jaw front chuck, and chip conveyor Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 2680X Year of manufacture: 2005 / Commissioned in 2006 Technical data: Center height: 325 mm Distance between centers: 2150 mm Swing diameter over bed: 650 mm Swing diameter over cross slide: 410 mm Swing diameter in gap: 870 mm Spindle speeds: 0 – 2,400 rpm Spindle bore: 82 mm Spindle motor: 15 / 22 kW Dodpjyy N Rfofx Ad Njcg Machine weight: 4,800 kg Accessories / Special Features: • Cycle control FAGOR 8055 with alphanumeric keypad o LCD color monitor o Graphical cycle simulation o 2 electronic handwheels • Pneumatic 3-jaw front chuck, make SMW, Ø 315 mm o By using this pneumatic front chuck, the entire spindle bore of Ø 82 mm remains available. With hydraulic chucks, the spindle bore is reduced by the required draw tube. • 8-position tool turret VDI 40 • Hinged belt chip conveyor • Fixed steady rest • Automatic headstock lubrication • Automatic lubrication of longitudinal and cross slides • Tailstock • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder: DIN 69871 ISO 40 Travel paths: X-axis: 1615 mm, Y-axis: 815 mm, Z-axis: 725 mm Table load capacity: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Space requirements (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special Features: • CNC path control FAGOR • ICS coolant through spindle, 20 bar • 24-position tool changer • Hinged belt chip conveyor • Coolant system Dodpoyy Npnofx Ad Njcg • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2008, Center height: 445 mm Center distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous rating / S 6 (40%) Machine weight approx. 12,500 kg Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keyboard o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-station tool turret • 2 fixed steady rests with rollers • Movable control panel • Automatic lubrication of headstock • Automatic lubrication of longitudinal and cross slides • Tailstock with hydraulically operated quill • Coolant system • CE conformity Dcedpfxeyy Nlpj Ad Neg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2015, 1 used, very well-maintained high-performance CNC lathe with FAGOR 8055i TC, 45° slant bed, and chip conveyor Manufacturer: MICROCUT, Origin: Taiwan Model: Challenger 92 HTL Year of manufacture: 2012 / Commissioned in 2015! Technical Data: Turning diameter over bed: 600 mm Turning diameter over cross slide: 450 mm Longitudinal travel: 1250 mm Bar capacity max.: 91 mm Spindle speed: up to 2,500 rpm Spindle mount: A2-8 Feed rate: up to 3,000 mm/min Rapid traverse (X/Z-axis): 24 m/min Tool turret: 8-position, VDI 40 Tailstock taper: MK 5 Drive power: 22/33 kW Dimensions with chip conveyor (L x W x H): 4614 x 1856 x 2016 mm Machine weight: 6,600 kg Chip conveyor weight: 600 kg Equipment / Special features: • CNC path control FAGOR 8055i TC • 8-position tool turret, VDI 40 • Hydraulic 3-jaw chuck Ø 305 mm Dcjdpfx Adoyy Ndre Neg • Hollow spindle max. bar diameter 91 mm • Hinged belt chip conveyor • Parts catcher • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: refurbished (used), functionality: fully functional, This machine is unused since refurbishment to meet UK safety standards by Industrial Microwave ServicesLtd in 2024. Refurbishment Notes: 1. Control system being fitted with a siemans PLC, controlled from a 4” siemans H.M.I. 2. Applicator structural strengthening and seam welding of all joints. 3. Emergency stop safety systems to conform to U.K. safety standards. 4. Strengthen the main frame to enable the equipment to moved without damage. 5. Improve the Magnetron launch inputs to the cavity. Dcodpfx Adoyv H T Ao Nsg 6. Fit serviceable covers on all Magnetron ports inside applicator cavity.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Dedpfx Adowinpxe Necg Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected under power in Vilnius.

Condition: good (used), Year of construction: 2015, Main and counter spindle 3 turrets Dsdpfx Adsyx Tk Te Njcg Backside machining Fire extinguishing system Kraft & Bauer High-pressure system Büchele Bar feeder FMB Turbo 2-20

Condition: refurbished (used), machine/vehicle number: 2257, Manufacturing origin France Voltage 380/50/3 Netweight 3000 kg Custom position 8460.29 20 Dimensions 2400x1550 mm TECHNICAL DATA Dcjdpfx Adjfnm Iie Njg Diameter capacity 80 mm Type 2HA : 120 mm Maximum infeed grinding length 200 mm Maximum throughfeed grinding length (with normal-type guides) 300 mm Grinding wheel : -diameter 400 mm -maximum width 200 mm -bore 203.2 mm Driving wheel : -diameter 254 mm -width 200 mm -bore 127 mm Main drive motor 11-22 kW Driving wheel motor 1,1 kW Driving wheel speed 10 – 200 U/Min Standard accessories : 1 flange with grinding wheel 1 flange with driving wheel 1 workpiece support bridge 1 set of shims for workpiece support -Hydraulic dressing and trueing device for grinding and driving wheels -Variable speed drive of driving wheel -Electrical equipment for 3x380 v, 50 Hz -Main drive motor, 11 kW -Ammeter for main drive motor Starter keys and operating manual errors and omissions excepted data given without obligation.

Condition: excellent (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, total length: 5,700 mm, total width: 1,710 mm, total height: 2,780 mm, operating temperature: 95 °C, Equipment: cooling unit, For sale, as new and in a great functional condition A continuous synthesis reactor for organic compounds, based on microwave system, built in ATEX class II norm Sales price 120 000 CHF ex works (built new for 500 000 CHF) 3 raw material tanks, 100 L each 2 top entry agitators 1 CIP tank 2 finished product tanks, 50 L each 3 pumps 1 microwave with 2 generators (2450 MHz), 12 kW power output, fully conform to EU safety standards Dcedpfjvy T Ivex Ad Nog All high quality materials steel 1.4404, PTFE, Duran glass or similar High quality components (tanks, pumps etc), sensors and transducers, made in EU - full list available PLC controlled via 24V DC, with dedicated software Documentation available The UNIT has been now professionally decomissioned and is stored on palettes, ready for pickup. Purchase of selected components (such as tanks or pumps) is also welcome.

Condition: ready for operation (used), Pitch: 10 mm Thread length: 1460 mm thread Ø: 30 mm Spindle nut mounting: 60 mm Ø Dsdpfxjd Atq Ro Ad Necg

Condition: ready for operation (used), Length with support: 2280 mm Length of each extension piece: 710 mm 5 Carriages with overall height (lower edge of track to upper edge of carriage): 36 mm Runner rail mounting, hole: 6.5 mm at a distance of: 60 mm Carriage with 4 mounting holes: 6.5 mm Djdpfx Asd Atqkod Necg

Condition: ready for operation (used), Pitch: 20 mm Thread length: 2330 mm Dcjdpfjd Atq Esx Ad Nsg Thread Ø: 38 mm Nut length: 130 mm

Condition: ready for operation (used), Pitch: 10 mm Dodpfsd Atq Tjx Ad Njcg Thread length: 1165 mm thread Ø: 30 mm spindle nut mounting: 28 x 49 mm Ø Total length of spindle: 2170 mm

Condition: used, Year of construction: 2004, turning diameter 550 mm turning length 1100 mm control Fagor 8040T turning diameter over slide 230 mm Dcjdpfxjyuqh Hs Ad Neg turning dia. in gap 740 mm length of gap 350 mm spindle passage 72 mm turning speeds 100-4500 U/min Power 7,5 KW 3-jaw chuck 250 mm steady 220 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2006, turning diameter 550 mm turning length 3100 mm control Fagor 8055T turning diameter over slide 310 mm turning dia. in gap 790 mm length of gap 283 mm spindle passage 51 mm turning speeds 80-3500 U/min Power 15 KW 3-jaw chuck 250 mm Dodjyuqgvepfx Ad Necg steady 220 mm workpiece weight 2000 kg The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, table load: 5,000 kg, spindle diameter: 110 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 3,000 rpm, table length: 1,500 mm, table width: 1,200 mm, travel distance W-axis: 550 mm, overall weight: 22,500 kg, year of last overhaul: 2025, MICROMILL Table Type Boring Mill HBM 4 Control: Heidenhain iTNC 530 Tool Changer: 60 stations Tool Holder: SK 50 Chip Conveyor Dcedpfoyutfuox Ad Nsg Spindle run time: 9,700 hours For further machine data, see data sheet Documentation available In 2025: - Geometric inspection carried out - Glass scale replaced - Spindle head guide refurbished Machine still under power and in production 16-ton overhead crane available for disassembly

Condition: ready for operation (used), Year of construction: 2014, operating hours: 25,915 h, Movement X-Axis Movement 1200 mm Y-Axis Movement 730 mm Z-Axis Movement 650 mm Dodox D D T Tspfx Ad Nocg This 3-axis MICROCUT V-30 Challenger was manufactured in 2014. It features a Heidenhain 530 control system and a high spindle speed of 18,000 rpm. The machine offers extensive axis travels with X-Axis at 1,200 mm, Y-Axis at 730 mm, and Z-Axis at 650 mm. With 25,915 machining hours, consider the opportunity to buy this MICROCUT V-30 Challenger machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, MicroStep MG 18001.30 PraG Dimensions: 18,000 x 3,000 mm 1x plasma rotator: renewed in 2022 1x straight oxy-fuel torch Hypertherm HPR 260XD plasma source Excluding filter unit Dsdpfx Ajytga Nsd Nocg

Condition: good (used), Year of construction: 2013, operating hours: 35,500 h, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type lathe Make: STAR Dsdpfx Adeyu Nqyj Nocg Model: SV-32 Year: 11/2013 with: FANUC 16i TB control backside machining synchronous spindle turret driven tools C-axis high-pressure pump fire extinguishing system chip conveyor bar feeder magazine FMB TURBO 3-36

Condition: used, Year of construction: 2008, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 7BCR250, type of input current: DC, input voltage: 220 V, measuring range X-axis: 200 mm, measuring range Y-axis: 80 mm, measuring range Z-axis: 100 mm, bolt circle diameter: 350 mm, total width: 750 mm, total length: 460 mm, total height: 1,100 mm, overall weight: 115 kg, repeat accuracy: 0.01 mm, input frequency: 50 Hz, The Helios 350‑V is a high-precision profile projector designed to meet the demands of metrology laboratories, machine shops, and quality control departments. Manufactured in Italy by LTF S.p.A., it combines advanced optical engineering, mechanical robustness, and user-friendly operation, making it an essential tool for reliably measuring small and medium-sized parts. Its industrial-grade optical system delivers a sharp, stable image, ideal for inspecting contours, radii, angles, and complex geometries in a non-contact manner. The high-contrast illuminated screen enables profile viewing with excellent clarity, supporting comparison with templates, grids, or digital measurements. The Helios 350‑V features a smooth and stable stage, purpose-built for repetitive measurements with tight tolerances. It comes equipped with a digital readout system for console-based alignment and measurement (Quadra Check 2000). Its illumination system ensures uniform projection, even on parts with complex geometries or low-reflectivity materials. Constructed from high-grade materials with a rigid framework, it guarantees dimensional stability and long service life, even in demanding industrial environments. Dedpsyuv Thofx Ad Nocg

Condition: ready for operation (used), functionality: fully functional, grinding wheel width: 100 mm, grinding wheel diameter: 350 mm, overall weight: 2,000 kg, The machine was retrofitted and modernised in 2025. The modernisation includes the addition of automatic loading and automatic cycle functions. The user interface and control panel are available in English, German, and French. TECHNICAL DETAILS Grinding wheel dimensions (outer diameter x inner diameter x width): 350 x 127 x 100 mm Grinding wheel width: 100 mm Grinding wheel speeds: Infinitely variable Regulating wheel speed: 10 - 250 rpm Feed: Automatic Regulating wheel dimensions (outer diameter x inner diameter x width): 230 x 76.2 x 100 mm Regulating wheel width: 100 mm Maximum length to be straightened: 200 mm Workpiece diameter to be straightened: 1.5 - 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,300 x 1,600 mm Dcjdpfxoyym Emj Ad Nog Weight: 2,000 kg EQUIPMENT New coolant tank with paper filtration system

Condition: good (used), MicroStep SPL-PA Plasma Cutting System with Extraction and Compressor Technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Dcodjyvd Uispfx Ad Neg Machine type: CNC plasma cutting system CNC control: iMSNC Design: gantry construction with linear guides Extraction unit: Donaldson Torit DCE Electrical connection (extraction unit): 400 Volt Motor power (extraction unit): 7.5 kW Compressed air generation: screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE certification: available Location: Waltenhofen, Germany Dismantling and loading by the seller included.