Used Portal Milling Center - Double Column for sale (30,754)

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Cgedok S Dt Tspfx Af Hou Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 20 t, Double column press 20 T capacity, a) Closing speed up to 10 mm/sec b) opening speed up to 30 mm/sec c) table size between columns 1400x1100 mm d) ram size between columns 1400x1100 mm e) Manual lubrication (via grease nipple) f) UKF pump-cooling-filtration ( electrical cooling ) g) Pressure adjustment from 4 T to 20 T ( adjustable via rotary control ) h) Travel adjustable via slide control Type of construction Press design Double column press ,hydraulic Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Codpfx Afehmbhqo Hegu Pressing force max. 200 kN Free ripping force max. 20 kN Pressure build-up time Closed tool Steel on steel Max. 4 sec. Dimensions Max. Opening width 500 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 2800 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.4 mm/m Weight Total weight of the press without operating materials approx. 3 to Table cut-out Size 1100x850 mm Speeds Fast closing with 9 mm sec. Pressing speed 9 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of press/driving cylinders 2 pcs. Operating pressure max. 280 bar Pressing pressure build-up time 3-5 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 L/min Oil volume approx. HLP 46 D 150 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Circulation pump for cooling ACS approx. 6.5 L/min Electrical system Main supply 400 V AC Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW

Condition: like new (used), Year of construction: 2019, pressing force: 400 t, pressure:400 t stroke:900 mm Table dimensions:1200 x 1200 mm Deep-Drawing Pillow:150 t travel away deep-drawing pillow:280 mm Cgsdpfxsfh Izme Af Heu Daylight Opening:1100 mm

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 550 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :550 mm Ram plate:700 x 600 mm table height over floor:900 mm Table size:700 x 600 mm speed of forward flow:50 mm/sec Pressing speed:10 mm/sec :50 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,3 t dimensions:1150 x 2600 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Heating panels (L x B) with 2 measuring sensors diagonally:550 x 500 mm Siemens Control System:S7 1200 Monitor:12 Zoll :2400 ? Cgodpfx Aofxygpof Heu :1200 ? :1200 ?

Condition: as good as new (ex-display), Year of construction: 2017, machine/vehicle number: DF0052, pressing force: 200 t, pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t dimensions of the machine ca.:4000x2600x5000 m draw back pressure:20 t Master cylinder:1 Stück voltage:400 V frequency:50 Hz :24 V :BOSCH/REXROTH dayligth:800 mm :1200x1000 mit T-Nuten nach Kundenwunsch DIN 650-22 mm work height max.:1100 mm pre-running speed:170 mm/sec return speed:150 mm/sec Speed printing phase:15 mm/sek. Cgedpfofxyirex Af Hsu Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC (Mindestdruck 20t) Oil Cooling:elektrisch :220 (im Schaltschrank) V memory:200 Programme :über Monitor von 20-200 t Controll:Zweihandbedienung beweglich :2-10 mm/sec :0-10 sec

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm Cgedpfxefhcc Ro Af Hju :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressing force: 160 t, table length: 550 mm, table width: 500 mm, working height: 700 mm, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm Cgedpfxofxyh Rs Af Hsu table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm tool taper SK 40 number of tool places 30+190 Pos. A-axis ° C-Axis 360 ° table surface area 800 x 630 mm table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 800 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled. Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable speed control - 5-axis simultaneous machining - 70 bar internal coolant supply - Flushing nozzle - Workpiece measuring probe - Blum laser tool control Cgedpfx Aoyzt Dljf Heu - Heidenhain 410 electronic handwheel Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2015, HAAS ST 30 SSY Turning-milling center Year of manufacture: 2015 Control system: HAAS ONLY approx. 9,950 operating hours (as of March 25, 2026) Equipment: Turning-milling center with C/Y axis Travel distances of max. 406 mm x 584 mm Swinging diameter of 806 mm Y-axis travel ±50.8 mm Cgsdpfx Afsy Uwt Ro Hou Vector drive (22.4 kW) A2-6 spindle, 4,500 rpm 10-inch chuck (254 mm) Hybrid turret with 24 tool stations (12 VDI/12 BOT) Driven tools with higher torque with C-axis 15" LCD color screen Memory lock key switch Spindle orientation USB port Synchronized thread drilling Automatic tool pre-setting system Hinged belt chip conveyor Parts catcher Programmable hydraulic steady rest Ethernet interface "Visual Quick Code" programming system VectorCam Turning Special Haas Edition HAAS bar feeder Ø 76 mm Hainbuch collet chuck combo, pull-stud size 80 Chip guard for GR80 Vario Quick - Standard clamping system, size 80 Included in delivery: BOT/VDI – holders / turret Turning tools Hainbuch collets Collets for tools Driven tools Wing-door tool cabinet Machine setting elements Chip cart Operating manual/documentation Machine parameters on USB stick Technical data, manufacturer's brochure, and machine layout – see PDF. All technical specifications, images and content are non-binding and without guarantee. Subject to change and errors. All other accessories shown in the pictures and video are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation and invoice. FCA (Free Carrier, Truck) D-32457 Porta Westfalica Excluding packaging Delivery time: immediately Subject to prior sale / Payment immediately upon completion of purchase

Condition: good (used), Year of construction: 2011, 1 x CNC turning center Chiah Chyun Csdpszakrisfx Af Hegu CB-32 M Year of manufacture: 2011 with chip conveyor Technical data can be found in the document. A total of 3 machines are available. The machines can still be inspected in operation and under power for approximately 3 weeks.

Condition: used, Year of construction: 2016, x-travel 4.500 mm y-travel 1.300 mm z-travel 1.800 (2.300) mm control iTNC 530 HSCI Heidenhain tool taper ISO 50 DIN 69871 AD spindle turning speed range 20 - 6.000 U/min spindle drive 43 kW Torque 900 Nm table surface area 6.000 x 1.100 mm Cgjdpey Umagofx Af Heu T-slots 6x 22 H12 mm T-slots REF: 1x 22 H7 mm T-slot - distance 140 mm number of toolpositions 40 pos. tool taper ISO 50 DIN 69871 max. tool diameter 125 mm max. tool-dia with free toolbox 250 mm max. tool length 400 mm max. tool weight 20 kg tool changing time 10 sec rapid traverse ( X / Y / Z ) 35.000 mm/min Feed force ( X / Y / Z ) 16.000 N Accelaration X: 1 | Y:1,5 | Z: 2 m/s² total power requirement 57 kW CNC Fixed-Bed Milling and Boring Center SORALUCE - SLP 6000 - Automatically indexing milling head with 0.001° x 0.001° indexing in two planes - Tool clamping force: 20,000 N - "Dynamics Active Stabilizer" preparation - Dynamic Collision Monitoring Software (DCM) - Interpolation turning - INA linear roller guide system RUE55-E-L (X/Y/Z axes) - Hydromechanical damping slides (Y/Z axes) - Rack-and-pinion drive (X-axis) - Ball screws (Y/Z axes) - Heidenhain AC drive motors with digital drive technology - Pressurized direct linear measuring system (Heidenhain) - 3D thermal expansion compensation for all milling head positions - Automatic feed control - Enhanced accuracy via Soraluce 3D milling head compensation - Preparation for NC rotary table (for 5-sided machining) - Tool changer function: loading and unloading during automatic operation - Adaptive Control - Accura Heads option - DXF converter - Heidenhain interpolation turning - Splash guard enclosure (2x front doors, 2,500 mm)

Condition: used, Pressure total: 1200 ton Cgodpfeyw Rvqox Af Hsu Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton Standard configuration Pin distance 150 mmPin Diameter 50 mm

Condition: used, Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Csdpfx Afsyw R Ade Hjgu Ejector stroke in ram: 150 Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton Standard configuration Pin distance 150 mmPin Diameter 50 mm

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 89697, We are selling our Spinner CNC lathe due to relocation. The machine is in good condition and fully operational, except for the handling system. You are welcome to inspect the machine on-site and see its functionality for yourself. We offer ex works (EXW) delivery terms only. A large loading ramp and loading equipment are available at our premises. Cedpsyzq Smofx Af Hsgu

Condition: used, Year of construction: 1995, Machine in parts for sale spare parts ..... CNC lathe, make GILDEMEISTER Type: CTX 600, year 1995 Forkardt chuck 315 mm, tool turret Cedpfx Aenximuef Hogu Tailstock, steady rest Headstock Guide covers and sheets Motors Machine in individual parts for sale ..... Please ask what you need and we will send you an offer.

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Cedpfxju Eug Is Af Hogu With lots of accessories.

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,200 mm, Equipment: documentation/manual, Mazak Quick Turn Nexus 350M CNC turning center with Mazatrol 640T Nexus CNC control Cgjdpsx Dccyefx Af Hsu Year of manufacture: 2004.11 Turning length: 1,200 mm Max. swing diameter: 750 mm Standard machining diameter: 336 mm Max. machining diameter: 420 mm Bar capacity: 102 mm Maximum spindle speed: 4,000 rpm 12-position tool turret Kitagawa 12-inch hydraulic 3-jaw chuck Tailstock Machine weight: 7,500 kg Includes various turret-mounted tool holders, 4 driven tool holders, and additional accessories. Accessories: 4 driven tools Mazak tool holders Chip conveyor

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, For sale is a high-quality CNC turning and milling center, a Spinner TC77-SMCY with Siemens Sinumerik control. The machine is equipped with: Y-axis C-axis Counter spindle Powered tools Cgodoy Uwmwepfx Af Heu Chip conveyor Extensive tool package Technical data: Bar diameter 77 mm 12-position VDI50 turret Main spindle ASA 8 Counter spindle ASA 6 Speed up to 4000 rpm Turning diameter approx. 500–690 mm Turning length approx. 800–900 mm Y-axis ±60 mm Main and counter spindle Weight approx. 6000–7000 kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, The machine was serviced annually under a maintenance contract with Okuma. Okuma Mac Turn 550 W / 9-axis turning-milling center Year of manufacture: 2005, Control system: OSP-E 100 L / Expansion Kit “M” Kit One Touch IGF Milling spindle carriage X/Y/Z/B, Counter spindle W-axis, Main spindle with C-axis, Counter spindle with C-axis, Turret carriage below X/Z axis, Max. turning diameter: 720 mm, Turning length: 2,000 mm, Distance between tailstock center and spindle center: 2,505 mm, Y-axis: 250 mm / +/- 125 mm, Main spindle speed: up to 3,500 rpm, Spindle power: 30 kW Turret below: 12-station without driven tool stations, Nco Dmnbyeyt Nvtoujt Turret below with steady rest, therefore only 9 stations instead of 12, Self-centering steady rest: 35 - 240 mm, Milling spindle: infinitely variable B-axis 0.001°, Magazine: 80-station, Mount: HSK 100, New Forkhart three-jaw chuck Ø 400 mm, value 12,000 €, Counter spindle without chuck, currently with arbors / delivery without arbors, Enlarged main spindle: 110 mm Ø 150/110 mm, Spindle nose: Size 11, 2-stage clamping pressure, Counter spindle as a hollow shaft motor, speed up to 3,800 rpm, Ethernet LAN interface, Renishaw in-process measurement, Additional measuring system for Y-axis, Tool length: 450 mm instead of 350 mm, Door automation for both doors, Chip conveyor, Gravity belt filter with clean tank 900 liters, Supply pump, frequency-controlled up to 20 bar, The machine was serviced annually under a maintenance contract with Okuma. In 2023, the cable carrier for the W-axis, including all hoses, was replaced. In October 2024, the linear guides X/Y/Z were replaced. Work performed by Okuma. Machine cleaned. Sheets and covers removed. 8th axis removed. Travel stand removed and lifted out of the machine. ATC removed and lifted out of the machine. Cedey Uhfkopfx Af Hsgu All linear guides removed. Mounting surfaces of the Z-axis cleaned. New linear guide for Z-axis including shoes installed and tightened with the specified torques. New ball screw for Z-axis including bearing mounted and installed. Base plate of the travel stand installed and tightened with the specified torques or screwed onto the shoes. Lubrication lines connected. ATC including attachments installed and connected. New linear guides YA and XA installed and tightened with the corresponding torques. New ball screw YA including bearing installed. Travel stand installed and lubrication lines connected. Base plate XA placed and aligned. 8th axis placed and aligned. H1 turret installed - Install drive motor for the 8th axis - Assembly of 8th axis + new H1 and adjust geometry - Functional test of 8th axis and H1 - Run-in program for B-axis approx. 12 hours, then drain old oil from the 8th axis - Run-in program for H1 and create defect report for OEG - Install left door, adjust various sheets - Install chuck - Adjust zero points - Check tool change

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C axis, Counter spindle with C axis, Cedjy Uhccjpfx Af Hogu Y-axis slide above / milling spindle, HSK 63 tool holder, Infinitely adjustable B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Lower turret with 12 tool positions and powered tools, Interlite compact filter system 900 l, Extraction system, Spindle running time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure cooling, WZG measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: used, Year of construction: 2007, operating hours: 67,434 h, functionality: fully functional, machine/vehicle number: PT18SY0210, turning length: 300 mm, turning diameter: 230 mm, spindle motor power: 18,500 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 205 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, feed length Z-axis: 350 mm, feed rate Z-axis: 30 m/min, chuck outer diameter: 250 mm, bar diameter (max.): 65 mm, overall weight: 8,800 kg, We are offering a high-performance and reliable Doosan TT1800SY CNC turning center, ideal for demanding serial production as well as complex precision machining. Key Features: Dual spindle (main + sub spindle) Y-axis for off-center and complex machining Twin turret system (upper + lower turret) Cedpfx Aey D Rypof Hsgu Live tooling capability Full spindle synchronization (simultaneous machining) High productivity with reduced cycle times Technical Specifications: Max. turning diameter: approx. 230 mm Max. turning length: approx. 300 mm Bar capacity: approx. 65 mm Spindle speed (main/sub): up to 5,000 rpm Spindle motor power: ~18.5 kW Y-axis travel: ±50 mm X/Z axis travels: approx. 205 mm / 350 mm Rapid traverse rates: up to 30 m/min Turrets: 2 × 12 stations Live tooling speed: up to 6,000 rpm Tool holders: BMT55 Control system: FANUC 18iTB C-axis: both spindles

Condition: like new (used), Year of construction: 2005, Hardinge Quest 51 SP CNC lathe Super precision 2 axes Year: 2005 Control: FANUC Model: 21i-T Spindle speed range: 50–4200 rpm Spindle motor power: 15 kW X-axis travel: 189 mm Workpiece diameter above the bed: 520 mm Maximum turning diameter: 356 mm Through-hole bar capacity (round collet): 51 mm, spindle bore 60 mm Distance between centers (Z-axis travel): 610 mm Tool turret: 12 positions Square tool shank, max. 25 mm Tool diameter, max. 40 mm Tool change time (from station to station): 0.35 s Machine dimensions: width x depth x height: 1950 x 3860 x 1905 mm Machine weight: 5550 kg Accessories/options: - tool holders - chip conveyor - documentation Cgodpfx Afezak Ecs Hju Connected and available for inspection under power in our warehouse!

Condition: used, Year of construction: 2021, operating hours: 13,640 h, machine/vehicle number: 21121341, Catalog No.: 1.2, 3 shielded machining centers with plexiglass windows, each 250x300 cm, HEIDENHAIN TNC-640 control system, 6 controlled axes, tool holder SK50, table surface: 9,000x2,000 mm, max. table load: 30 tons, travel distances X/Y/Z: 8,000/1,300/2,500 mm, special equipment: universal milling head that automatically pivots continuously in 2 planes, internal coolant system, 60-position tool changer, rotary table (10 tons, 1,500x1,500 mm), clamping surface, continuously positionable, measuring probe RENISHAW, 4 clamping angles, external programming option via Mastercam, subject to prior sale. Codpfx Aey T Nx Asf Hjgu

Condition: used, Year of construction: 2020, operating hours: 17,031 h, machine/vehicle number: 00830004341, Catalog No.: 2.2, as a twin-spindle machine, SIEMENS 840D sl Operate control system, max. speed of turning and milling spindle: 10,000 rpm, max. drive power: 20 kW, max. torque: 120 Nm (100% ED), largest turning diameter: 360 mm, largest turning length: 1,200 mm, bar capacity: 102 mm, Capto C6 tool changer, tool magazine chain with 80 magazine positions, Y-axis travel: +/- 120 mm for eccentric machining, swivel range of the B-axis: +/- 110°, special equipment: hydraulic self-centering steady rest (25-199 mm), counter-spindle with tailstock function, fine chip removal system for cast iron machining, groove milling function, connection to central oil mist extraction system, external programming option via Mastercam, chip conveyor, subject to prior sale. Cedpjy T Nw Esfx Af Hsgu

Condition: used, Year of construction: 2020, operating hours: 13,641 h, machine/vehicle number: 00820028701, Catalog No.: 2.3, as a twin-spindle machine, with SIEMENS 840D sl Operate control system, max. speed of turning and milling spindle: 10,000 rpm, max. drive power: 20 kW, max. torque: 120 Nm (100% duty cycle), largest turning diameter: 360 mm, largest turning length: 800 mm, bar passage: 102 mm, Capto C6 tool changer, tool magazine chain with 80 magazine slots, Y-axis travel: +/- 100 mm for eccentric machining, swivel range of the B-axis: +/- 110°, special equipment: counter-spindle with tailstock function, groove stop function, connection to a central oil mist extraction system, external programming option via Mastercam, chip conveyor, subject to prior sale. Cgsdpfx Ajy T Nxcef Hju