Used Power Cleaver for sale (43,186)

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, overall weight: 109,000 kg, input voltage: 110,000 V, input frequency: 50 Hz, warranty duration: 24 months, nominal power (apparent): 100,000 kVA, nominal power: 100,000 kW (135,962.00 HP), secondary voltage: 33 V, temperature: 70 °C, empty load weight: 109,000 kg, input current: 530 A, type of output current: three-phase, output voltage: 33,000 V, Equipment: documentation/manual, type plate available, 110/33 kV transformer with 80 MVA capacity without forced air cooling and 100 MVA with forced air cooling, cooling type ONAF. Switching method: YNyn0+d. Pgsdpsz Iycvefx Ai Tou The transformer was intended for connecting a wind farm and a battery storage system, neither of which is currently being implemented. Therefore, the transformer is being offered at a price significantly below the purchase price. The transformer will be inspected and accepted on October 23rd/24th, 2026, in Ljubljana, Slovenia, at the manufacturer Kolektor ETRA’s testing facility.

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Pgedpfen Htktex Ai Tou

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Psdoxc Ni Ropfx Ai Togu

Condition: ready for operation (used), Year of construction: 2012, Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible. Pjdezk I U Uepfx Ai Tjgu

Condition: excellent (used), mileage: 168,410 km, power: 500 kW (679.81 HP), first registration: 10/2021, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: intarder, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,000 mm, loading space width: 2,500 mm, Year of construction: 2021, operating hours: 2,081 h, Equipment: ABS, AdBlue, air conditioning, electric window regulation, = Additional Options and Accessories = - Aluminum fuel tank - High beam headlights - Low noise - Air suspension - Rear view camera - Sun visor - Toolbox - Power take-off (PTO) = Additional Information = Axle configuration Front axle 1: Steered Front axle 2: Steered Rear axle 1: Lift axle; Steered Weights Unladen weight: 21,600 kg Payload: 10,400 kg Pgodpfxszc U Dzj Ai Teu GVWR: 32,000 kg Functional Mast: Telescopic (13 sections) Lifting capacity: 12,900 kg Superstructure brand: PALFINGER PK 65002-SH F +PJ 125E CE marking: yes Condition Technical condition: very good Optical condition: very good SCANIA P500 8x2*6 WITH PALFINGER PK65002-SH F POWER LINK PLUS + PJ125 E JIB CRANE An excellently equipped Scania P500 8x2*6 with a Palfinger PK65002-SH F Power Link Plus loading crane and PJ125 E jib, combining highest performance, reach, and versatility. This impressive combination is ideally suited for construction, industrial, infrastructure, and assembly applications where maximum lifting capacity and large reach are required. Powered by a powerful 500 hp Scania engine and equipped with a modern Palfinger crane system with 13 hydraulic extensions, a winch, and radio remote control, this vehicle is immediately ready for the most demanding lifting and transport tasks. Vehicle data Scania P500 Euro 6 L-package 500 hp engine Drive: 8x2*6 Wheelbase: 4,800 mm Air-suspended chassis Technically permissible total weight: 35,000 kg Automatic transmission with retarder Trailer coupling P cab Air conditioning Navigation system Telephone preparation Rear view camera Rotating beacon Air horns Open loading area Length: 6.00 m Width: 2.53 m Several toolboxes Crane specification Palfinger PK65002-SH F Power Link Plus + PJ125 E Jib 13 hydraulic extensions Hydraulic winch 4-point hydraulic outriggers Radio remote control Maximum lifting capacity: 12,900 kg Lifting capacity at 18.2 m: 2,500 kg Lifting capacity at 31.0 m: 470 kg Maximum working height: 35.0 m Highlights High-performance loading crane with large reach Excellent lifting capacity over the entire working range Fully operable via radio remote control Ideal for construction, industrial, and assembly applications Comfortable and comprehensively equipped cab Ready for immediate use This Scania P500 with Palfinger PK65002-SH F Power Link Plus and PJ125 E jib offers a perfect combination of transport capacity and state-of-the-art crane technology. An excellent choice for companies that expect maximum performance, reliability, and efficiency. For further information or to arrange a viewing appointment, please do not hesitate to contact us. Follow us on Instagram: @geurtstrucks We speak German We speak English Hablamos Español

Condition: used, Hydraulic unit, HAWE hydraulic unit Type: HC 2L/1.1-1B/400-0-31F-G24 Hydraulic pump in the tank Psdpfx Aozpbqgei Tegu Flow rate: 1.1 L/min Hydraulic pump power: 0.9 kW Hydraulic pump: 380 Volt, 50 Hz Hydraulic pressure: max 400 bar - 1 solenoid valve, 24 Volt Weight: approx. 12 kg Good condition

Condition: used, Hydraulic power unit, KOSMEK hydraulic unit Pneumatic pressure converter Type: PL 087 Operating pressure: 100 bar Flow rate: 1 liter/min Pedpfxszpbqte Ai Togu Tank capacity: approx. 4.5 liters - pneumatic drive - hydraulic connection Space requirement L x W x H: 250 x 140 x 290 mm Weight: 16 kg in good condition

Condition: used, functionality: unexamined, Ferwood Code: RU0007369 - Manufacturer Code: V15-10-00-0R - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Psdpfjv Ef Thox Ai Togu

Condition: used, Year of construction: 2017, Two RE2 Facelift wood gasifiers, in operational condition, are available. They have already been dismantled and are ready for collection in my warehouse. Pgodpfx Aisxuqpve Teu

Condition: ready for operation (used), Fanuc A06B-6087-H130 Power Supply Module SN:EA7601604, used, normal signs of wear, 100% functional, scope of delivery as per photos. Psdpjx Era Hsfx Ai Tjgu

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled Pgodpfxszugnzj Ai Tsu - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: excellent (used), We offer combined heat and power (CHP) units. For sale: Complete CHP unit, consisting of: • 2 × 20 kW Indop (gas) (Toyota Motor) • 5,000-liter buffer tank Pgedozr H I Nepfx Ai Tsu • All pipes and connections • Gas pipes • Heating pipes • Chimney (stainless steel) • 600-liter expansion tank • All circulation pumps • Control electronics • All sensors The entire system is fully functional and will be sold as a complete unit. Location: Slovenia. Price is negotiable.

Condition: ready for operation (used), Siemens 6SL3210-1SE21-8UA0 Sinamics Power Module 340, serial number XABD05-005099, used, in good condition, 100% functional, scope of delivery as shown in the photos. Pgodpoz Ax A Tsfx Ai Tju

Condition: new, FORD Emergency Power System Psdpfxjy U Dr Tj Ai Tegu

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: WB-RES-SS40A, Gluma metal busbar system – standard length 4.5m Type SG4/1/40 – 4-pole – L1 L2 L3 PE – quantity available: approx. 81m Pedpfszxa R Rox Ai Tegu Type SG5/1/40 – 5-pole – L1 L2 L3 N PE – quantity available: approx. 126m Voltage Ui max. 400V, frequency 50 – 60 Hz Price refers to each 4.5m busbar length, including connectors Complete systems are available, including connectors, end pieces, feed-in units, current collectors, and mounting brackets. Robust resistance to temperature and dirt thanks to a stable, galvanized metal construction. Busbar systems are in good condition. Used condition, see pictures.

Condition: used, Bosch Rexroth 5.5 kW industrial hydraulic power unit with Lammers motor, Used Machine POWER UNIT / HYDRAULIC TANK (BOSCH REXROTH): Manufacturer / Brand: Bosch Rexroth Kft. Work Order No.: 3285684/30 Type: RRG Conversion Year of Manufacture / Week: 2011 / Week 20 Tank Capacity: 100 litres (dm³) Recommended Oil Grade: HV 46 Design: Robust blue-painted steel hydraulic tank with oil level indicator and inspection/cleaning opening. Operating Pressure: 80 bar Maximum Pressure: 160 bar DRIVE MOTOR: Manufacturer / Brand: LAMMERS Elektromaschinenfabrik (Rheine, Germany) Type: 12AA 132S-4 Power: 5.5 kW (50 Hz) / 6.05 kW (60 Hz) Speed: 1440 rpm (50 Hz) / 1725 rpm (60 Hz) Voltage: 400/690 V (Δ/Y) Psdpjzzc S Nefx Ai Togu Current: 11.3 / 6.55 A Protection Rating: IP55 (Class F insulation) OVERALL DIMENSIONS: Width: 770 mm Depth: 580 mm Height: 1400 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 26 t, overall weight: 1,080 kg, Equipment: documentation/manual, In perfect condition, tested and fully equipped. New hydraulic hoses, new oil, and new gas springs for the doors. Psdeztgnxspfx Ai Tegu

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller Podpfxoztppxe Ai Tegu -Manufacturer: Indramat, AC servo power supply from CNC machining center Mikron VC500D -Type: KDV1-3-100-220/300-W1 -Quantity: 1x Power Supply available -Dimensions: 485/390/H105 mm -Weight: 20.9 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DG18000SE-3D, overall weight: 280 kg, fuel type: diesel, tank capacity: 30 l, color: white, power: 13 kW (17.68 HP), output current: 50 A, output voltage: 230 V, nominal power: 12 kW (16.32 HP), continuous power: 12 kW (16.32 HP), total length: 1,220 mm, total width: 750 mm, total height: 810 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, We present the mobile generator for your uninterrupted power supply needs. The DG18000SE-3D generator offers a continuous output of 12 kW with its reliable 4-stroke engine. You can operate the DG18000SE-3D generator for up to 8–10 hours with its 30-liter tank. You can start the generator via electric start or recoil start. The starter battery is charged during operation, thus enabling easy starting the next time you use it. Technical data: Maximum power: 13 kW Rated power: 12 kW Frequency: 50 Hz Speed: 3000 rpm Rated voltage: 230 V / 400 V Power factor (cosφ): 1.0 Power: SINGLE-PHASE / THREE-PHASE Pgjdpfx Aiozvm A Us Tju Starting system: Electric start or recoil start Noise level (7m): 75–78 dB Tank capacity: 30 L Dimensions: 1220 × 750 × 810 mm Weight: 280 kg

Condition: new, Technical specifications: Number of rollers: 6 Roller size: 120x60 mm Maximum feed: 20 mm Number of speeds: 8 Feed speed: 2-4-5.5-6.5-11-13-16.5-33 m/min Distance between rollers: 133-154-133-133-133 mm Distance between the first and last roller: 686 mm Pgjdjzvm Siopfx Ai Tju Motor speed: 1400/2800 rpm Motor power: 0.75 kW

Condition: used, functionality: unexamined, Ferwood Code: RU0002548 - Manufacturer Code: KL9110 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 0.5KG - 20X20X20 Pgsdpfx Asyk Efxoi Tsu

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle Psded N E Rvopfx Ai Togu 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: like new (used), Year of construction: 2001, Set of clamping cones SK 50 - like new. Hardly used. Pjdpfsxnldzsx Ai Tsgu

Condition: used, functionality: unexamined, Ferwood Code: RU0010019 - Manufacturer Code: CJ1W-PD025 - Condition: Used - Functionality: Untested - If interested we offer a revision service, contact us. Pgjdpov In Tisfx Ai Tju

Condition: excellent (used), Year of construction: 2013, Control system: UNILOG B6 Closing force: 4500 kN Distance between columns: 950 × 700 mm Minimum mold height: 330 mm Maximum mold height: 780 mm Screw diameter: 65 mm Injection pressure: 2070 bar Maximum injection weight: 980.9 g Injection unit: ServoElectric (Knodler) Injection speed: 400 mm/s Servo package S0 ServoPower package S1: hydraulic pump speed control for increased energy efficiency Integrated filter unit: Yes Ejector type: Electric Pgjdpfxsytfqao Ai Tju Ejector force: 60 kN Ejector stroke: 180 mm Additional equipment: Air valve Cooling water flow regulator Digital interface for temperature controllers (control of up to 6 thermoregulators) Interface for nozzle needle shut-off control in the mould Interface for external hot runner controller Full integration for Wittmann W8xx series robot Quality control button Language: Polish