Used Rhtc Workshop Press for sale (18,174)

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm Nlsdou Nfn Rjpfx Ab Reh clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW Nlsdpfxsu Nfp Ie Ab Rsh weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Condition: used, Technical details: Njdpfx Aou Nfwljb Rolh Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Year of construction: 2001, condition: used, Technical details: lifting capacity: 0,15 t span width: x. 1200 mm Nsdpfx Absu Nvixj Rjlh arm length:: max. 1200 Lifting height: 2400 mm stroke speed: handgesteuert weight of the machine ca.: 0,42 t dimensions L x W x H: 2,2 x 0,75 x 1,65 m Engine hoist / engine crane Welded sectional steel Lifting movement via lifting beam pneumatic vertical movement (pneumatic pressure cylinder) via hand knob Load hook type SIKA 1, cable safety device movable, braked in vertical position of the drawbar, double wheel swivelling 90° right/left, front area 2x wheels fixed Accessories 2x various lifting straps and 1x chain length approx. 950mm *

Condition: used, Technical details: pressure: 25 t stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm Nlodpevc Awxofx Ab Roh height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener High-performance press with roll feed/strip system and straightening machine Nsdpfx Aovt Nvpeb Rolh Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) Nodpfxeyzzh Es Ab Rolh The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Nledpfx Aow Smuksb Rsh Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: Nedou N Ddwopfx Ab Rolh - foot plate 2200x1500x40mm *

Condition: used, Year of construction: 2003, Technical details: pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Nodpszgvhujfx Ab Rolh Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel *

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 475 kg, total length: 1,300 mm, total width: 1,040 mm, total height: 1,240 mm, number of drawers: 5, Directly from the manufacturer, the original from the patent holder Apfel GmbH. Dimensions: W=1040 mm, D=1300 mm, H=1240 mm two-tone powder-coated Housing: black-grey structure (RAL 7021) Nedpfxouuamwj Ab Rslh Pull-outs : black-grey structure (RAL 7021) Payload per pull-out 900 kg Product code: 94032080 Swiss commodity code: 9403.2010 Origin: DE/08 Weight: approx. 475 kg As a set approx. 33 running meters of press brake tools completely assembled. Available in various sizes and with many accessories!

Condition: new, Year of construction: 2026, pressing force: 60 t, DURENDUS 60 T Workshop Press – Single-Column Press – 900 mm clear width, 400 mm stroke The machine shown here has already been built and delivered for a customer order. We can supply this machine from stock or manufacture it new – we will gladly take individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The listed options are based on realized customer projects and enable a targeted adaptation of the machine to the respective application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly for the specific project. Tabletop with X-shaped T-slot 600 × 900 × 30 mm Pressure adjustment Lateral displacement of the press ram (600 mm) Bending tool Torque-resistant cylinder with manual stroke adjustment V-profile straightening bolster in combination with tabletop LED lighting Foot switch Cooling ===== Technical data + information: ==== General information Design: Workshop press Press force: 60 t (optional adjustable) Total weight: approx. 750 kg Overall dimensions (W × D × H): 1,400 × 900 × 2,450 mm ==== Working area Clear width: 900 mm Open depth: 300 mm Installation height: 250–900 mm (variable) ==== Table & Ram Crossbeam usable width: 900 / 570 mm Ram stroke: 400 mm Cylinder diameter: Ø 150 mm Nodpfx Asy Hi D Esb Relh Piston rod: Ø 95 mm Height adjustment: via chain mechanism ==== Speeds No-load speed: 8 mm/s Return speed: 13.4 mm/s ==== Hydraulics & Drive Pump output: 8.5 l/min Motor power: 2.2 kW Hydraulic tank: 22 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connection power: approx. 2.5 kW ==== Equipment Height-adjustable crossbeams with pin locking Chain mechanism for table adjustment Manometer for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, removing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directive, as well as European Machinery Directive (Directive 2006/42/EC), the EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the design and manufacture of special machines and the automation of presses. We distribute customized hydraulic presses at surprisingly favorable prices. The hydraulics of the presses mainly use components from leading European manufacturers.

Condition: new, Year of construction: 2026, pressing force: 400 t, DURENDUS 400 T Workshop Press – Single-Column Press – 1,600 mm clear width, 550 mm stroke The machine shown here has already been built and delivered to a customer. We can manufacture this machine for you very quickly – and are happy to consider individual options. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The options listed are based on realized customer projects and enable targeted adaptation of the machine to the specific application. The basic machine represents a functional standard design – in practice, it is usually expanded with additional equipment and configured according to the specific project requirements. * Tabletop with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral displacement of the press ram (1,000 mm) * Bending tool * Twist-proof cylinder with manual stroke adjustment * V-profile straightening support in combination with the tabletop * LED lighting * Foot switch * Cooling ===== Technical data + information: ==== General information * Design: Workshop press * Press force: 400 t (optionally adjustable) * Total weight: approx. 4,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working area Nedpfxjy H Dn Ee Ab Rslh * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 1,600 / 600 mm * Ram stroke: 400 mm * Cylinder diameter: Ø 360 mm * Piston rod: Ø 235 mm * Height adjustment: via chain mechanism ==== Speeds * No-load speed: 7.8 mm/s * Return speed: 13.7 mm/s ==== Hydraulics & Drive * Pump capacity: 48 l/min * Motor power: 22 kW * Hydraulic tank: 120 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine adjustment via hand lever * Connection: 400 V / 50 Hz * Total connected power: approx. 23 kW ==== Equipment * Height-adjustable crossbeams with bolt locking * Chain mechanism for table adjustment * Pressure gauge for pressure indication * Emergency stop switch * CE certification * Two-layer coating according to RAL ===== Pressing, unpressing, assembly work, straightening work, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the national Brazilian safety guideline NR 12, which is based on these. Our strength lies in the construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly affordable prices. The hydraulics of the presses mainly use components from leading European manufacturers.

Condition: used, total length: 2,000 mm, total width: 1,100 mm, total height: 2,300 mm, Year of manufacture: 1981 Empty weight: 500 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Press force [ton]: 63 - Table length [mm]: 710 - Table width [mm]: 505 - Ram width [mm]: 280 - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Njdpfxoxhcgye Ab Rolh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS MANUFACTURER AND MODEL Manufacturer: REYER Machine type: Spindle press WORKING AREA Nlodpfo Adzh Eox Ab Rjh Table dimensions: 650 × 550 mm Flywheel diameter: approx. 2,000 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 2,200 mm Weight: 700 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: EHT Type: EHP 8-25 Year of manufacture: 1992 Nlodpfs Adzr Rex Ab Reh Machine type: Press brake Performance Data Press force: 800 kN Press force: 80 t Working length: 2,550 mm Bending length: 2,550 mm Frame width: 2,550 mm Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 22 V Rated current: 29 A MACHINE DETAILS Dimensions Length: 3,000 mm Width: 2,200 mm Height: 2,500 mm Weight Machine weight: 7,000 kg

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: electro-hydraulic press Machine weight: approx. 5 t Performance Data Pressure: 63 t Stroke: 315 mm Ram stroke: 200 mm Piston stroke: 200 mm Installation height: max. 450 mm Retraction force: 1.3 t Speeds Closing speed: 210 mm/min Return speed: 210 mm/s Table and Ram Table size: 710 × 630 mm Ram clamping surface: 710 × 630 mm Nlodpj Aa Ndysfx Ab Reh Drive Drive power: 15 kW Motor speed: 1,500 rpm Electrical Data Operating voltage: 380 V Control voltage: 220 V Dimensions Overall height above floor: 2,500 mm Overall width: 1,000 mm Depth: 1,600 mm EQUIPMENT Electro-hydraulic press control Fixed safety valve with overload protection Safety interlock Two-hand push button Emergency stop mushroom push button Infinitely adjustable stroke adjustment Infinitely adjustable pressure regulation Fully automatic continuous operation Mechanical, infinitely adjustable fixed stop in the cylinder Handwheel for stop adjustment with display scale Automatic star-delta starter

Condition: used, Year of construction: 1987, machine/vehicle number: 5347, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 10 t Stroke rate: 180 strokes/min Total power requirement: 1.1 kW Machine weight: approx. 0.6 t Stroke and ram data Stroke: 8–60 mm Ram adjustment: 40 mm Ram surface area: 180 × 110 mm Working area Overhang: 180 mm Table Table surface area: 400 × 340 mm Table height above floor: 935 mm Through-hole in the table: 80 mm Dimensions Space required: approx. 1.2 × 1.5 × 2.0 m EQUIPMENT Two-hand operation Foot operation Control cabinet Nsdpfx As Aa Nl Reb Rslh

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, TECHNICAL DETAILS General Information Machine Type: Single-column eccentric press Machine Weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke Rate: 120 strokes/min Stroke and Operating Data Overhang: 250 mm Stroke: 8–100 mm Installation Height: 330 mm Ram Adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping Plate: 700 × 480 mm Die Opening in Table: 240 mm Die Opening in Clamping Plate: 110 mm Ram Clamping Surface: 450 × 280 mm Tilting Design Tilting Stages: 4 Die Opening to the Rear: 325 × 500 mm Die Opening Downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space Requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Nodpo Achxbefx Ab Rjlh Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Piece counter Various accessories

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Nlodpfx Aj Ad Abgsb Roh WORK AREA Table dimensions: 230 × 200 mm MACHINE DETAILS Manufacturer: Mäusle Machine type: Spindle press Dimensions, length: 750 mm Dimensions, width: 550 mm Dimensions, height: 1,500 mm Weight: 200 kg

Condition: used, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Year of manufacture: 2020 Colour: Grey Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT Nledpfxszr Inwj Ab Rjh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), mileage: 149,573 km, power: 106 kW (144.12 HP), first registration: 02/2022, fuel type: diesel, tire size: 215/60R17, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 6, total length: 5,310 mm, total width: 1,920 mm, total height: 1,930 mm, loading space length: 1,740 mm, loading space width: 1,620 mm, loading space height: 1,400 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Tinted windows - Halogen lamp - Manual - Radio/cassette - Standard - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1285 kg, Unladen weight: 1745 kg, Gross vehicle weight: 3030 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2500 kg, Trailer coupling, Cabin type: Double cab, Cruise control, Air conditioning, Number of airbags: 1, Auxiliary heater, Rear windshield wiper, Parking assistance: Rear, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine power: 106 kW (142 hp), Number of cylinders: 4, Displacement: 1997 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: additionally extended, Side paneling, Roof rack: Standard, Side doors: 1, Side windows: 2, Rear closure: Tailgate, Workshop equipment, Central locking, Number of seats: 6, Seat arrangement: 3+3, Seat cover: Fabric, Seat adjustment: Manual, L3 XXL Double Cab Air Conditioning Navigation Workshop Equipment Auxiliary Heater Cruise Control Tow Hitch Euro6 144 HP!, Spare tire, Tire type: All-season tires = Additional Information = Njdoz S H T Depfx Ab Relh General Information Number of doors: 1 License plate: V-48-RHX Axle Configuration Tire size: 215/60R17 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Axle 2: Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Weights Unladen weight: 1,745 kg Payload: 1,285 kg GVW: 3,030 kg Functional Loading area height: 55 cm Maintenance APK (Technical Inspection): Valid until 06.2028 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: 292 € per month (van, 72 months); Ask for more information and conditions

Year of construction: 2012, condition: used, Operating voltage: 3×400V, frequency: 50Hz. Machine is fully functional. Inspection possible by arrangement. Nlsdpfx Abe Aba R Hs Rjh

Condition: new, for 10–12 mm rope Packaging unit: piece Quantity per package: 1 Nedpfj Abhcqex Ab Relh

Condition: new, Drill press vise MSP, jaws B. 120mm, clamping width 120mm, MAXION · Extremely robust, heavy-duty machine vise for production and craft applications · Base made of high-strength tempered cast iron · Hardened and ground jaws · Sturdy trapezoidal thread spindles with a long handle for maximum clamping force · Further technical features: Slot spacing (center to center): 165mm Nsdj Ab Dn Aspfx Ab Rolh Clamping width: 120 mm Jaw width: 120 mm Slot spacing (center to center): 165 mm