Used Ricoh Fiery Controller for sale (44,011)

Condition: used, functionality: fully functional, For sale: National Instruments PCI-6221 Multifunction DAQ I/O card, in fully working condition. Manufacturer: National Instruments (NI) Model: PCI-6221 Part Number: 192970C-01L Country of Manufacture: Hungary Condition: Used – Fully Tested and Working Tested: NI MAX – functionality verified Bdsdpfx Apozq Akwshjf Analog Inputs: 16 AI (16-bit, 250 kS/s) Analog Outputs: 2 AO Digital I/O: 24 DIO Counters: Two 32-bit counter/timers Connector: 68-pin VHDCI Interface: PCI Driver: NI-DAQmx compatible Tested with NI MAX software and confirmed to be functional. The operation of all analog and digital channels has been verified. Compatible with LabVIEW and LabWindows/CVI. Removed from a working industrial environment, no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Condition: used, functionality: fully functional, machine/vehicle number: PCI-6514, For sale: 2 National Instruments PCI-6514 Industrial Digital I/O Modules, in fully functional condition. Manufacturer: National Instruments (NI) Model: PCI-6514 Quantity: 2 units Condition: Used – Fully Tested and Functional Tested with: NI MAX – operation verified Channels: 64 (32 inputs, 32 outputs) Voltage range: ±30 VDC Isolation: Bank-isolated Interface: PCI Bdsdpfx Apszqywnehjf Watchdog timer for safe error handling Driver: NI-DAQmx compatible Both units have been tested with NI MAX software, and the operation of all 64 channels has been confirmed. Ideal for factory automation, industrial control, and manufacturing testing. Removed from a working industrial environment, no faults found. Shipping from Hungary. International shipping available. Carefully packaged with antistatic protection.

Condition: excellent (used), GWK TECO CS 90 E mold temperature controller, water, 95ºC, heating power 6 kW, cooling power 23 kW Features: - Display of functions and errors. - Access to device control at various password-protected levels. - Comparator (monitoring of momentary value parameter tolerance values ​​with alarm signaling). - Electronic medium level control with dry-run protection. - Automatic filling and refilling with medium level monitoring. - Additional option for manual filling with treated water. - Automatic air venting. - Leaky mold management function. - Mold emptying. Control / Security: - Temperature sensor in the power supply circuit. - Overheating protection. - Contactless heating control with solid-state relays. - Safe temperature reduction upon shutdown. Bdedpsznl Dujfx Aphjf - Acoustic alarm signal (horn). - Symmetrical network load with three-phase drive and three-phase heaters. - 3-fold safety heating exclusion

Year of construction: 2017, condition: used, Manufacturer: REGLOPLAS, Type: P161XL/40/SM85/S K/RT 100, Year of manufacture: 2017, Serial No. 113201170002, 113201170003, 44 kW, MC control system RT 200 Bdsdpszn An Rofx Aphsf +++ Attention: These units are part of an online auction! +++

Condition: used, Year of construction: 2018, Manufacturer: ONI, Model: TCW90 Plus, Year of manufacture: 2018, Serial No. 18026, Heating capacity: 18 kW, Cooling capacity: 164 kW, MC control system Bodpfx Apszn Anqjhedf +++ Attention: This unit is part of an online auction! +++

Condition: good (used), Control switch with crane hook, crane remote control, control head, crane control, crane control, pendant control, control switch, control cylinder, command switch for manipulator, lifting aid, lifting device, workstation crane, overhead jib crane, overhead crane, workstation crane, material grab, column jib crane -Manufacturer: Demag, Demag Manulift control switch with crane hook -Control switch: Type DSM4 Bedpfx Ajzmf Abophodf -Crane hook: Load capacity 250 kg -Transport dimensions: 360/170/H200 mm -Weight: 3.3 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control unit, control control -Manufacturer: Elprom-Iskra, control switch for crane remote control -Type: AKPT-64 -Dimensions: 245/65/55 mm -Weight: 0.4 kg Bedezmfdljpfx Aphsdf

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control unit, control control -Manufacturer: Faell, control switch for crane remote control -Type: KS-24a Bedpfx Aezmfdfjphedf -Dimensions: 475/90/85 mm -Weight: 0.8 kg

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control unit, control control -Manufacturer: Steel, control switch crane remote control -Type: SWH3 -Dimensions: 360/65/65 mm -Weight: 0.8 kg Bdjdpfx Apszmdvmohsf

Condition: ready for operation (used), Siemens 1FK7060-2AF71-1CH1 servo motor, serial number: YFJ0640129801006, without encoder, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bjdpfx Apjzmlx Nohedf

Condition: ready for operation (used), Siemens SIMOTICS 1FT7084-5AC74-1NH0 synchronous motor SN: YFN1629189601004 - Encoder IC2048S/R I24 / Brake 24 VDC 24W 48Nm, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery as shown in the photos Bodpfx Aezmlyajphsdf

Condition: excellent (used), Ref: MM6323 ROKK Processing Ltd continuous freezer supplied with control unit. Manufacturer: ROKK Processing Ltd. Model - RFE 300. Bjdpeydlg Asfx Aphjdf Date of manufacture - 2024. Freon gas - R404A. Ideal for use in small laboratories up to large factories. Limited use over the 16 months since installation. Control unit: 1 x ROKK Processing Ltd Control Unit. Manufacturer: ROKK Processing Ltd Model: SP40BC Capacity - 100 to 300 liters per hour Calibrated to BRC standard 3 Phase power Fixed and flexi hose dispensing options Pipes for connection to pasteuriser included Various spare parts included Overall dimensions - 1100mm long x 730mm wide x 1620mm high. Weight - 550 kg. The spray arm at the top of the machine (blue) can be detached for shipping.

Year of construction: 2024, condition: good (used), functionality: fully functional, We are offering this well-maintained em machines Liquid Mate Sense Premium monitoring and control system for cutting fluids, manufactured in 2024, featuring a completely new set of sensors. Manufacturer: em machines Model: Liquid Mate Sense Premium Year of manufacture: 2024 Condition: good Category ID: 661 Type: Monitoring and control of cutting fluids Bedpfx Ajzm Hahjphedf The LiquidMate Sense Premium is an innovative, standalone plug-and-play solution for fully automated monitoring and control of cutting fluids in individual machines and central systems. It precisely measures concentration, pH value, and temperature, monitors the fill level, and actively regulates the cutting fluid. A major advantage is the circulation monitoring, which ensures regular movement of the cutting fluid and prevents bacterial growth and fungal contamination. The solution is low-maintenance, easy to install, and offers versatile connectivity, including an integrated online dashboard for convenient remote monitoring. LiquidMate is CE and UKCA certified and works with all common cutting fluids, contributing to environmentally friendly and cost-effective operation. If you have any questions or require further information, please send us a message or call us. We have 11 of these units available, and the machines can also be inspected. We can also offer them as a package.

Condition: new, MF-Inverter 1000Hz for resistance weldingmachines HWI 2806-2816 IQ Profil + HWS 2102 IQ Profil available from stock Bdsdpeyrx Nyofx Aphof

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. Bdedpfszmyviex Aphsf 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: used, Pump + Controller ALCATEL/ADIXEM ATH-1300M + ACT-1300M/1600 M: 1 pump type ATH-1300M Maxi pump rotation: 34 000 RPM Flange: DN160/200/250 ISO-K 1 controller type ACT-1300M/1600 M (see technical details on photos) + 1 cable Bsdpfx Aszmwmrophjdf Used, functional, untested equipment

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kawasaki RS05L robot with E-Controller and enclosure Bjdpfxjzmrn Ds Aphjdf Control system: E-Controller Number of axes: 6 Max. payload: 5 kg Max. working range: 902 mm Year of manufacture: 12/2012 Scope of delivery: Robot, control system, cables, teach pendant, wiring diagrams, floppy disk drive for data backup. Used – shows normal signs of wear. Further details, article numbers and images available on request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Fanuc LR Mate 200iC Robot, R-30iA Mate Robot Controller Year of manufacture: 2011 Scope of delivery: Robot LR Mate 200iC, Type A05B-1139-B204 I Pendant, A05B-2518-C202#EGN Fanuc System R-30iA Mate, Type A05B-2553-B061 Cable Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Bjdszmqp Topfx Aphodf Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify delivery address.

Condition: used, Available quantity: 6 units Functionality tested; item originates from the dismantling of equipment at an automotive supplier Bdodpszmm I Sjfx Aphsf Manufacturer: BBH Products GmbH Model: SMX31 Type: Safety module for machine control Supply voltage: 24 V DC Function: Monitoring of emergency stop buttons, door interlocks, and light curtains Approval: EN ISO 13849-1, SIL 3, PL e Interfaces: safe inputs and outputs

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Robust, remotely controlled log carrier Robocontrol from Möhringer. Bdjdpfx Ajzmyf Dephef Track gauge 980 mm. Carrier height 430 mm. Fully hydraulic. Travel speed: 100 m/min. Equipped with log turning chains and a log clamping device. Robust auxiliary carrier with log turning chains. Fully hydraulic. Auxiliary carrier retraction via hydraulic brake actuator. Electrical control cabinet with control system. Cab electrically operated, with noise insulation and heating. 2 doors, front window can be opened. Equipped with operating switch. Comfort seat. Control elements and flat cable.

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm Bodpfxsvwgpbo Aphedf - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 Cycle Lathe (2011) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2011 Condition: very good, used Bodpfx Ajzmpyqjphsdf Center distance 750 Swinging diameter over bed 330mm Swinging diameter over cross slide 160mm Travel of cross slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027, size 5 Spindle diameter in the front bearing 70mm Spindle bore 40.5mm Internal taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7kW Total speed range 1 – 4,500 rpm Feed force longitudinal 6,000N Feed force transverse 3,000N Feed range 0.001 – 10 mm/rev Rapid traverse speed longitudinal/transverse 6/3 m/min Metric threads 0.1 – 400mm Inch threads 56 – 1/4 G/inch Module threads 0.125 – 28mm DP threads 224 – 1 Dp Max. number of thread pitches 99 Tailstock diameter 50mm Tailstock travel 130mm Internal taper of the tailstock MK3 Length 1750mm Width 1350mm Height 1670mm Weight 1300kg Scope of delivery Chuck Multifix including 17 tool holders Machine light Coolant system Machine feet Original documentation Drawer cabinet

Condition: ready for operation (used), Siemens 1FT6034-4AK71 synchronous servo motor, serial number: YFT230998401002, without encoder, in new condition, 100% functional, scope of delivery as shown in the photos. Bjdpfxezl N Ryo Aphedf

Condition: ready for operation (used), Siemens 1FT6082-1AF71-1AG1 synchronous servomotor, serial number: EH582227202001, with optical encoder 2048 S/R. Used, in good condition, 100% functional. Scope of supply as shown in the photos. Bdedpfozl N R Hjx Aphof

Condition: ready for operation (used), Yokogawa TM-H6A3PB1NR076 torque motor SN:96H105 + 6RH-D9 gearbox SN:96H120, used, normal signs of wear, 100% functional, delivery as shown in the photos. Bedpszl N Sqefx Aphodf