Used Rogi Cy350Rn Inverter for sale (1,881)

Condition: used, Year of construction: 2016, Overview Automated 2-vessel steam brewhouse for 20 BBL (2,347 L) batches, built in 2016 by American Beer Equipment (ABE), Lincoln, Nebraska, USA. The package covers the complete hot side: mash/lauter tun, kettle/whirlpool, hot and cold liquor tanks, plate heat exchanger, UL control cabinet with touch-panel HMI, an ATTSU steam generator and a reverse osmosis water treatment unit. Currently installed and in operation. Technical data - Manufacturer: American Beer Equipment (ABE) - Year of manufacture: 2016 - Batch size: 20 BBL (2,347 L) - Mash/lauter tun: 20 BBL (2,347 L), rake drive with 3 HP SEW gear motor - Kettle/whirlpool: 20 BBL (2,347 L) - Hot liquor tank: 30 BBL (3,520 L), steam heated - Cold liquor tank: 2,347 L - Heating: steam (brewhouse and hot liquor tank) Dcjdpfoz Iypvox Adron - Material: AISI 304 stainless steel, vessels and piping - Connections: 1-1/2" Tri-Clamp sanitary - Pumps: 2 HP stainless sanitary centrifugal pumps, 30 GPM at 15 PSI - Operation: automatic valves, transfers and pumps, controlled from the HMI - Electrical supply: 380 V, 3-phase, 50 Hz, 40 A Scope of Delivery - Mash/lauter tun | ABE | 20 BBL | rakes with SEW gear motor, grist hydrator, wort grant, mash pump | 2016 - Kettle/whirlpool | ABE | 20 BBL | steam heated, brew pump | 2016 - Hot liquor tank | ABE | 30 BBL | 3,520 L, steam heated, HLT pump, liquor blending assembly | 2016 - Cold liquor tank | ABE | 2,347 L | 2016 - Plate heat exchanger | ABE | 20 m² | AISI 304 plates, design temperature 150 °C, rated pressure 116 PSI (8 bar) | 2016 - Control cabinet | ABE | UL | touch-panel HMI, temperature controllers for mash, kettle and HLT, Delta frequency inverters | 2016 - Steam generator | ATTSU | RL-300/12 | natural gas burner, max. working pressure 12.3 bar, max. temperature 193 °C, 501 L total volume, 3 x 400 V, 1,130 kg empty weight | 2016 - Reverse osmosis unit | with water softener and brine tank - Hard-plumbed AISI 304 sanitary piping with automatic valves Documentation ABE brewhouse manual (specifications, plumbing and electrical diagrams, HMI screens) and ATTSU steam generator manual. Condition Used, installed and in operation. Availability From 23 September 2026. Location: Spain.

Condition: good (used), Fanuc Level Shifter PREMOSYS VE-P-0001 Level Converter VEP0001 | VE-P Shifter PREMOSYS VE-P-0001 Level Converter This module is used to convert encoder signals fed in by a standard encoder. These signals can reach a level of 5 to 24V DC. A potential-free conversion to an output level of 5V DC with RS 422 characteristics is performed. Dcedsxl S Ubepfx Adren In addition, the pulse frequency of the output signals can be output with division ratios of 1/2/4/8/16/32/64 and 128, where the counting direction can be inverted. All that is required is to switch a DIP switch. The division ratios only apply to the counting signals of the encoder (K1 and K2); the encoder zero signal is output undivided. Technical data: 5 to 24V input of encoder signals Output signals 5V RS 422 Input frequency up to 1 MHz Division ratios 1 to 128 Optical status indicator DIN rail mounting Lockable connectors Manufacturer's price: €5,680 More Fanuc robots and components can be found in our shop! Larger quantities are sometimes in stock.

Condition: new, Two-stage side channel compressor The VASF 2.50/2-0.AC230 is a flow machine with a VARIAIR frequency inverter, offering high performance with 100% oil-free and contact-free operation. These side channel blowers are low-maintenance, highly efficient, and require minimal servicing. Features VARIAIR frequency inverter Contact-free compression Compact design Inlet and outlet silencers Sealed bearings eliminate the need for lubrication Vibration dampers for horizontal installation Additional cooler Advantages Precise volume flow through speed control Low operating and exhaust temperatures Low-noise operation Specifications VASF 2.50/2-0.AC230 Volume flow: 24 m³/h Relative pressure: +560 mbar Inverter power: 0.65 kW Hz: 50…300 Hz Sound level: 61 dB(A) Weight: 12.3 kg with motor & inverter Djdsyk Dkmspfx Adrjcn You can find more new and used items in our shop! International shipping costs available upon request!

Condition: like new (used), Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,600 mm, overall weight: 14,000 kg, Veneer stack cutting machine / Veneer shears with 4 knives Manufacturer: Monguzzi (Fisher+Rückle) Type: AFV-42-3600 Year of manufacture: 2024 Hydraulic veneer shears with 4 knives for trimming and edging veneer stacks Typical applications: Veneer mill, veneer trade, veneer cutting, furniture and interior design with solid wood veneer Cutting range: Cutting length approx. 3600 mm 4 knives (2 upper and 2 lower knives), individually selectable Hydraulic pressure beam with 2 cylinders Hydraulic pressure switchable 45 bar / 90 bar Axes and drives: Positioning axes X and X2 (left / right) with stepper motor control Axis Y with frequency inverter 1.5 kW and brake Register adjustment with frequency inverter 0.75 kW and brake Register adjustment also via foot pedal Conveyor belt Line laser Hydraulics: Hydraulic unit with tank capacity 300 l Proportional valve Filter monitoring (contamination indicator) Control: PLC control with touch panel (esaware) Manual operation, automatic cutting, parameters, diagnostics, alarm history, programming Control panel with push buttons and emergency stop Safety: Emergency stop safety relay Pilz PNOZ X3 Light curtain with safety module Datalogic SE-SR2 Two-hand operation Electrical connection: 400 V, 50 Hz, 3P + PE Current consumption approx. 22 A Fuse 25 A Dcjdez I Tipjpfx Adrsn Control voltage 24 V DC Basic concept: - Veneer stack cutting machine with 4 hydraulically operated knives - Pressure beam for fixing the veneer stack during cutting - NC positioning via the X, X2 and Y axes - Waste flaps for scrap - CE declaration of conformity according to Machinery Directive 2006/42/EC available, as well as documentation and circuit diagrams available Weight approx. 14,000 kg

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator Dcsdpfx Aez A Sz Hjdron 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator Dsdpsz A R R Hjfx Adrecn 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock Dcsdpfswgwmnex Adron 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: new, Year of construction: 2026, GANNOMAT "PROTEC 571" (Drilling, Grooving, Milling) Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Requirement for horizontal Lamello P-system milling - Requirement for milling diameter > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and milling cutter set 1 HSK mounting set 1 Mounting device HSK63F, simplest operation with the highest level of user comfort thanks to the roller clamping system, no clamping or tightening required, mounted on a stable base or on a workbench 1 Hook wrench for HSK63F collet 462E Dcjdpjzgfwlofx Adrjn 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 Counterpressure device from above 1 LED lighting in the machine's working area 1 Tool for vertical Lamello P-system milling Machine with very good equipment including many drills and tools New machine with full warranty. The machine can be viewed and demonstrated in our showroom. A special price can be offered for our showroom machine!!!!!

Condition: excellent (used), Catalog number 7713 TECHNICAL DATA - Max. width of the workpiece: 240mm - Max. height of the workpiece: 130mm - 6 spindles: Dodpfjztzhgex Adrjcn 1) Horizontal lower, 240mm, 7.5kW 2) Vertical right, 130mm, 5.5kW 3) Vertical left, 130mm, 5.5kW 4) Horizontal upper, 240mm, 7.5kW 5) Horizontal upper, 240mm, 5.5kW Spindles 4 and 5 are adjustable up/down electrically 6) Horizontal lower, 240mm, 5.5kW - All spindles are adjustable up/down, left/right - Spindle diameter: 40mm *Top: - 8 feed rollers, metallic, toothed, including 3 double rollers - 4 delivery rollers, smooth, rubber, including 2 double rollers *Bottom: - 3 feed rollers, smooth - 3 side pressure rollers - Infinitely variable feed speed adjustment via frequency inverter - Pressure rollers pneumatically actuated - Feed motor: 7.5kW - Feed on Cardan shafts - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Length of the infeed table: 2480mm - Pneumatic opening/closing of the hood - Pneumatic blowing of the table - Central lubrication of the table - Diameter of the dust extraction nozzles: 3x120mm, 3x150mm - Dimensions (L/W/H): 5300x1700x1800mm - Weight: 5000kg ADVANTAGES - Made in Italy - With 6 heads - For both wet and dry wood - Pneumatic opening of the hood - Pneumatic blowing of the table - Spindles 4 and 5 are adjustable electrically - Used planer, very good condition Net price: 99900 PLN Net price: 23240 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to exchange rate fluctuations)

Condition: excellent (used), Catalog number 7294 TECHNICAL DATA - max. width of workpiece 230mm - min. width of workpiece 15mm - max. height of workpiece 160mm - min. height of workpiece 10mm 7 spindles: 1) horizontal lower 230mm 7.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) horizontal upper 230mm 7.5kW 6) horizontal upper 230mm 7.5kW 7) horizontal lower 230mm 5.5kW Dcsdpfxezab Nfs Adren - all spindles adjustable up/down, left/right - spindle diameter 40mm - spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - motor 2 x 0.37kW - spindle diameter 40mm - all spindles equipped with a brake from above: - 8 feeding rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, pulling, rubber, double from below: - feeding roller, toothed, pulling, pivoting - 3 discharge rollers, pulling, metal, smooth - rollers are pneumatically pressed - length of the feeding table 2480mm - central lubrication of the table - electric adjustment of planing thickness - motor for lifting the housing 0.56kW - stepless feed speed adjustment on an inverter 6-24m/min - feed motor 3.7kW - feed on Cardan shafts - diameter of the dust extraction nozzle 7x125mm - dimensions L/W/H 5520x1930x1900mm - weight approximately 4000kg ADVANTAGES - for 7 heads - ideal for wet and dry wood - with ATS - original DTR + CE documentation - unpainted - used planer, in perfect condition Original photos Net price: 156900 PLN Net price: 36500 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: new, Three-phase motor Manufacturer: Danfoss Type: VCM 330/M21 R1 L 2T 192 H 1514 Dcjdpfexughzsx Adron 400 Volts 3 kW 6.4 Amps 3000 rpm Equipped with frequency inverter Danfoss 0 - 7560 rpm Unused, in opened original packaging Transport dimensions: Length: 350 mm Width: 195 mm Height: 270 mm Weight: 29.5 kg

Condition: as good as new (ex-display), FN 350 Single-phase EMC filter for motor drives and inverters Compact filter solution for single-phase inverter applications Touch-proof connection terminal Enables compliance with EN 55011/14/22 Dedpfxecdzyrs Adrocn Compliant with ICE 60950 Frequency: DC - 400 Hz Leakage current: 4.9 to 11 mA Attenuation performance: standard, high 8 units available

Condition: good (used), mileage: 834,435 km, power: 353 kW (479.95 HP), first registration: 01/2021, fuel type: diesel, tire size: 385/55 R22,5, axle configuration: 6x2, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro6, suspension: steel-air, total length: 6,490 mm, total width: 2,550 mm, total height: 3,990 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2021, Equipment: central locking, cruise control, electric window regulation, fridge, navigation system, power mirror, second fuel tank, = Additional Options and Accessories = - 2 beds - Aluminum fuel tank - Remote central locking - Speed limiter - Alloy wheels - Lift axle - Air horn - Sleeper cabin - Sun visor - Converter = Notes = The heater control does not work! Crack in the windshield Axle load indicator Saddle height: 117 cm Special interior equipment Inverter New tachograph Dodpfxezvqkis Adrjcn Refrigerator Leather interior Alloy wheels Navigation system Lift platform Remote spotlights = Additional Information = General Information Number of doors: 2 Model year: 2026 License plate: 45-BRB-8 Technical Information Number of cylinders: 6 Engine displacement: 11,120 cc Axle Configuration Axle brand: Other Brakes: Disc brakes Front axle: Tire size: 385/55 R22.5; Max. axle load: 8000 kg; Steerable; Tire tread left: 45%; Tire tread right: 45%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 385/55 R22.5; Lift axle; Max. axle load: 7500 kg; Steerable; Tire tread left: 35%; Tire tread right: 35%; Suspension: Air suspension Rear axle 2: Tire size: 315/70 R22.5; Double tires; Max. axle load: 11500 kg; Tire tread left inner: 45%; Tire tread left outer: 45%; Tire tread right inner: 45%; Tire tread right outer: 45%; Suspension: Air suspension Weights Unladen weight: 7,489 kg Payload: 18,511 kg GVW: 26,000 kg Interior Interior: gray, leather Number of seats: 2 Maintenance, History, and Condition Number of owners: 1 APK (Technical Inspection): Valid until 02.2027 Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: used, Herbot Industrie cucumber and carrot slicing machine, Type 26 E: Industrial machine with high performance Like-new PLC control system with frequency inverter Cutting width can be adjusted continuously Approximately 250 spare blades available Ready for immediate use Dcedpfjwq Ipzjx Adron Price quoted is net, ex works Offer is subject to availability without guarantee

Condition: excellent (used), CATALOGUE NUMBER 7556 Technical data: - min / max width of the workpiece 20 / 240mm - min / max height of the workpiece 8 / 160mm Dsdpfx Adozu R R Hjrjcn - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 infeed, toothed rollers, including 2 double rollers - 2 outfeed, smooth, rubber rollers – from below: - side pressure before and after the roller in the lower bed - toothed, infeed roller, swivel in the lower bed before the first spindle - 2 pneumatic side pressure rollers - outfeed, metal, smooth roller - all rollers with pneumatic pressure - length of the infeed bed 2180mm - bed adjustable up/down - central lubrication - electric adjustment of the cutting depth - lifting motor 0.75kW - stepless speed adjustment of the feed rate on a frequency inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet + - diameters of the dust extraction nozzle 4x150mm - dimensions L/W/H 3750x1750x1800mm - weight 3300kg ADVANTAGES – with 4 heads – ideal for wet and dry wood – used machine, in perfect condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min Dsdpfxovbhv Rs Adrjcn clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of cooling: water, Equipment: cabin, For sale is a ready-to-use, compact, plug-and-play welding cell: OTC Easy Arc MIG/MAG 3.03. This system combines precise robotic technology with a high-performance, high-end welding power source and a fully automatically controlled horizontal rotary positioner. It is ideally suited for the automated, cost-effective production of small and medium-sized series. The entire cell is mounted on a stable base frame with a welding table/perforated plate and can be easily integrated into your production process. Technical highlights & components: Robot FD-B6: Highly dynamic 6-axis articulated arm robot, optimized for arc welding with internal cable routing (6 kg payload). Controller FD11: Modern robot controller for precise path guidance, including an ergonomic teach pendant for quick programming. Welding power source Welbee Inverter P400: Pulse welding power source (400 A) for spatter-free welding of steel, stainless steel, and aluminum, even at high welding speeds. Easy Arc PB250 Positioner / Horizontal Rotary Table: Fully controlled additional axis (up to 250 kg payload) for precise workpiece rotation, which enables welding in the optimal weld pool position, even with complex components. Safety concept: Complete enclosure including welding protection viewing windows and CE-compliant safety technology for direct use in a workshop. Condition & scope of supply: The system is in very good, fully functional, and ready-to-use condition, as it has been used only rarely. Scope of supply: Complete welding cell as described, including welding torch equipment, cable package, and documentation. The system is available immediately and can be inspected under power after consultation. Technical data at a glance: Manufacturer: OTC DAIHEN Europe GmbH Model: Easy Arc MIG/MAG V03.03 Year of manufacture: 2024 Power connection: 400 V / 50 Hz B2B sale with exclusion of all warranties. Subject to prior sale. Net price plus VAT ex Philippsburg. Loading can be arranged on-site. Components: Robot welding cell as shown Dsdpjzvqunsfx Adrocn OTC welding robot Easy Arc MIG/MAG 1.03, robot FD B6 Easy Arc PB250 (Move) programmable positioner for automatic component alignment Controller FD11 Welding machine Welbee P400 Additional equipment: Water cooling If you have any questions or require further information, please send us a message or call us. An inspection and demonstration are possible at any time.

Condition: used, machine/vehicle number: 10E5T60-1001, KEB Automation EMC Filter, part no. 10E5T60-1001, is an advanced passive component from the COMBILINE series, designed to eliminate high-frequency electromagnetic interference in drive systems. The device is specifically dedicated for use with KEB COMBIVERT F5 series inverters (housing sizes F4 and F5). Dedpfx Aey Dqbmsdrecn Technical Specification: - Rated Voltage (UL): 480V AC - Max. Input Voltage: 3-phase, up to 528V AC - Rated Current (UL): 6.7 A - Rated Current (nominal): 8.0 A - Mains Frequency: 50/60 Hz - Number of Phases: 3 phases + PE - Operating Temperature Range: up to 45°C (Class 3K3) - Protection Degree: IP20 Key Functions and Application: - Interference Suppression: The filter effectively blocks conducted radio frequency interference (RFI/EMI) in the range of 150 kHz to 30 MHz. - Mains and Device Protection: Prevents harmonics generated by high-speed IGBT switching in inverters from entering the power grid, protecting sensitive electronic equipment. - Standard Compliance: Helps meet EMC requirements according to EN 61800-3 for categories C1 and C2. - Mounting: Designed for control cabinet installation, often on a 35 mm DIN rail.

Condition: used, Technical details: power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 58 kg dimensions of machine: 0,6 x 0,35 x 0,5 m Welding rectifier/inverter with trolley MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A Dcsdpfxsu Nwdks Adron E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 Without hosepackage and welding gun! *

Condition: used, Technical details: power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 64 kg dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A Dcsdpfx Adsu Nwd Deren E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 without hose package without grounding cable *

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - cutting height 30-200mm - max. saw blade diameter 350mm - spindle diameter 70mm - max. width of wood being cut 500mm - working width of the shaft with saw blades 400mm - minimum length of wood being cut 1000mm *from above: - anti-kickback devices - 4 toothed feed shafts – pneumatically pressed *from below: - sliding roller - anti-kickback devices - 2 toothed feed shafts - shafts with saw blades - 2 toothed feed shafts - stepless speed adjustment on an inverter - feed motor 3kW - main motors 2x55kW - diameter of dust extraction nozzle 250mm - machine dimensions L/W/H 2150x1880x1800mm - machine weight approximately 3500kg ADVANTAGES – Polish production – twin-shaft multi-blade saw 2x55kW – original DTR documentation + CE Dodpfx Aozw Duwedrecn – used multi-blade saw, very good condition Net price: 88900 PLN Net price: 20700 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Year of construction: 2022, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, number of axes: 3, total height: 1,580 mm, total length: 3,600 mm, total width: 2,150 mm, overall weight: 1,300 kg, table length: 3,000 mm, table width: 1,500 mm, 3-axis CNC router for sale. Fully operational, currently in production. Working area: 1500 x 3000 x 200 mm (X,Y, Z axis) 4.5 kW HSD Air cooling spindle 4 sets Yako Stepper motors and drivers T-Slot PVC table 20 mm HIWIN Linear Guide from Taiwan DSP A11 controller system Drive system: X/Y axes: Helical rack & pinion drive Z axis: TBI ball screw drive 5.5 kw BETA Inverter Manual Lubrication system Japan OMRON limit switch Solid steel frame construction Power supply 3-phase, 380 V, 50 Hz Djdpjz Hc T Uefx Adrjcn Power 6 kW Dimension: 3600 × 2150 × 1580 mm Weight 1300 Kg

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, operating hours: 600 h, power: 0.011 kW (0.01 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 35 t, stroke length: 300 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, table width: 60 mm, table height: 100 mm, clearance between the columns: 1,375 mm, total length: 2,250 mm, total width: 1,820 mm, total height: 2,515 mm, overall weight: 4,900 kg, controller manufacturer: Lenze, controller model: SafanDarley E-Control, working width: 1,275 mm, bending force (max.): 35 t, back gauge: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 1,375 mm, height adjustment type: electric, installation height: 1,000 mm, warranty duration: 12 months, control type: CNC control, number of axes: 7, actuation type: electric, Equipment: CE marking, safety light barrier, The E-Brake Premium 35t-1250 is the fastest servo-electric press brake on the market, manufactured by SafanDarley. Lenze servomotors controlled by frequency inverters from the same company enable fast and reliable operation of the system for many thousands of operating hours. The SAFANDARLEY E-Brake features a patented drive transmission method, which is implemented using reinforced belts. The roller system creates what is known as a multi-block or multi-pulley system. This principle has been known for years, but its successful implementation in SAFANDARLEY press brakes since 1995 has resulted in a press that is approximately 30% faster than hydraulic presses, quieter, more environmentally friendly, and eliminates the need for oil changes. Parameters: SAFANDARLEY servo-electric press brake, model E-Brake 35-1250 - Pressing force: 350 kN (35 tons) - Stroke: 300 mm - Opening: Q = 690 mm Dcodpfsr Axxzsx Adron - Accuracy of the upper beam: +/- 0.01 mm - Max. bending speed: 10 mm/s - Max. speed of the back gauge fingers: 350 mm/s - Max. reach of the back gauge fingers (third point of reference): 1000 mm - Connected power: 11 kW - Machine width: 2225 mm - Machine depth: 1820 mm - Machine height: 2550 mm - Weight: 4,300 kg - Servo-electric drive (without hydraulic system) SAFAN E-Control – numerical control system - Dual 21'' color split-screen touchscreen (The lower part of the screen enables programming, and the upper part allows viewing PDF documentation, DXF files, or a 3D visualization of the bending process) - Swivel arm - ELO Touch technology EC20 – 2D graphics program, overlay for the E-Control control system CNC axes: Y1, Y2 – CNC-controlled axes X – CNC-controlled axis deltaX – CNC-controlled axis R – CNC-controlled axis Z1, Z2 – CNC axes Safety light guard – programmable light curtain: Basic function – safety Interruption operation function – 1 cycle / 2 cycles Curtains can be disabled in safe mode WILA NSCL I HC upper adapter – hydraulic upper tool clamping system Safan OBS/3 table – lower tool mounting system, compatible with Wila/Trumpf or Amada tools, table with a width of 60 mm and a 13 mm groove Ergonomic package: cutout in the table for working in a seated position, ergonomic tables, ergonomic chair E-Bend S system – sheet thickness measurement system with automatic deflection correction The machine is in like-new condition. Inspection, testing, and presentation are possible on-site – Sosnowiec. Each unit undergoes a full technical inspection and quality testing by an authorized SafanDarley service center.

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE® inverter with MDX60A0550-503-4-00 power module. This is a 55 kW frequency inverter designed to power three-phase 3×380–500 V motors. The parameters correspond to the MOVIDRIVE B series. Technical specifications Control unit Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00/0T P/N: 08279691 Control unit P/N: 08249571 S/N: 0159828 SO#: 01.1569277601.0001.08 Dcjdpfozphcpex Adrjn Protection class: IP00 Country of manufacturer: Germany (Made in Germany) Power module Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0588043 Input parameters Power supply: 3 × 380–500 V AC ±10% Frequency: 50–60 Hz ±5% Input current: 94.5 A (400 V) Operating temperature: 0–40°C Protection class: IP10 Output parameters Voltage: 3 × 0–500 V Frequency: 0–180 Hz Output current: 105 A (400 V) Apparent power: 73.5 kVA Recommended motor power: 55 kW Additional information Repairs performed at SEW EURODRIVE Werk Wien Repair No.: 14584 Repair performed: Week 24 of 2012 Final inspection: Week 24 of 2012 Condition Device has been tested and is fully functional. Good visual condition, with normal signs of use. All connections and terminals are complete and consistent with the photos. The set for sale is exactly the one shown in the photos.

Condition: new, I am offering a brand new Siemens SIMOTICS motor (1FE series) – a professional servo/spindle motor designed for inverter duty. Dcjdpfsyxqmxjx Adrjn This is a high-grade industrial motor, commonly used in CNC machine tools, delivering high power, precision, and reliability. The motor comes from warehouse stock (New Old Stock – NOS), unused and stored in original Siemens packaging. ⚙️ Technical Data Manufacturer: Siemens Series: SIMOTICS Model: 1FE1114-6WW11-1BN2-Z-T56 Power: 20.9 – 26.8 kW Voltage: 425 V Current: 58 / 85 A Nominal speed: 1000 rpm Max speed: 6000 rpm Max torque: 330 Nm Duty cycle: S1 / S6-40% Cooling: water-cooled Temperature sensor: KTY84-130 Protection rating: IP00 Insulation class: F (155°C) 📦 The set includes: Siemens SIMOTICS motor Original Siemens packaging (as shown in the pictures) 📌 Key advantages: ✔️ Condition: NEW (warehouse stock / NOS) ✔️ Made in Germany ✔️ Genuine Siemens industrial quality ✔️ Ideal for CNC / machine tools / automation ✔️ High power and torque