Used Romi Gl 350B for sale (1,871)

Condition: used, 2-axis pick-and-place unit, loader, servo robot, workpiece gripper, component insertion unit, pick-and-place robot Pick-up device, handling device for presses, lathes, etc. GETECHA, Type GL-20S Serial No. 13836, Year of manufacture 10/2003 Travel range, Z-axis: 1900 mm Travel range, Y-axis: 250 mm Travel speed, Z-axis: max. 1100 mm/sec. Travel speed, Y-axis: max. 227 mm/sec. Continuously variable travel speed in the Y and Z axes via servo motors SMB - Precise axis movement via linear guides - Control system: epis - Control panel located nearby - Interfaces for conveyor belt, gripper magnets, ejector cylinders, vacuum, gripper Laedpfx Aeharwyjcfjf - External monitoring inputs for emergency stop, press open, press closed, safety doors closed, automatic mode - Mounted gripper with 3 lifting magnets, 3 pneumatic ejector cylinders (30 mm stroke), 1 pneumatic clamping cylinder (40 mm stroke) - Operating hours: 25998 hrs. The unit was used as a loader/pick-up device on a press. Space requirement L x W x H: 2900 x 1800 x 2000 mm Weight: approx. 800 kg Good condition

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz Lsdpfxewk Nxqe Acfoaf - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: used, Wig welding machine, DALEX, type GL/W 201 WIG welding machine Machine no.: 201, year of manufacture approx. 1995 Power: 200 amps, 35% duty cycle 160 amps, 60% duty cycle 120 amps, 100% duty cycle Adjustment range: stepless Type of current: DC - direct current Mains connection: 400 volts, 50 Hz, 5.9 kVA, 32 amp plug - 2-cycle and 4-cycle welding system - WIG hose set, 8 meters Laodpfei E Izvsx Acfsf - HF ignition - Shielding gas pressure regulator - Electrode welding for coated electrodes - Fan cooling - Connection socket for foot switch (without foot switch) Space required L x W x H: 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise, the machine is in very good condition.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. In very good technical condition, after total renovation. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Machine in is at our premises, testing on-site is possible. Max Sheet Size: Width: 2200 mm (87") Min Sheet Width: 70 mm (3") Laedpfx Ajyzfkkjcfef Electrics: 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 50 L/min

Condition: used, Year of construction: 1991, with 2 double-head linear grinding machines used, good condition Lsdpfxjvwgihe Acfeaf Make: Reckmann Type GL 162 Year of manufacture 06/1991 Machine no. 1622 Workpiece width 10-100 mm Workpiece thickness 10-106 mm Number of units 2 x 2 Vibro longitudinal grinding units 2 double-head, tiltable 130 ° Pressure rollers from above Pressure from the side Digital display Feed speed 0-25 m/min. continuously variable Space requirement approx. 2500 mm x 1300 mm x 1300 mm Weight approx. 850 kg Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee or warranty

Condition: good (used), functionality: fully functional, conveyor belt length: 3,500 mm, conveyor belt width: 500 mm, Length 350 cm Width 50 cm Ledpfoyiar Isx Acfeaf Height adjustable 2 units available Price: 950 EUR per unit

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Electrical and Safety Voltage: 400 V Protection class: 1 Lasdpfx Acjypdw Dsfsf Connected load: 77.4 kW Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Portal loader GL 100 F

Condition: good (used), Offer consisting of: Transomat/stacker by Knorr Systeme, robust design, year of manufacture 1999, incl. material for supplementing a guillotine cutter, year of manufacture 1999. Laedpfexwqx Njx Acfof

Condition: new, cutting area - round: 320saw band dimension: 4160 x 34 x 1,1cutting area 45°: 320cutting area rectangle: 610 x 320cutting area 45° mitre flat: 355 x 320cutting speed: 20-100messurements (LxWxH): 2100 x 1200 x 1350weight approx.: 1200 KK Kletzer UBS-S 320 GL  Semi automatic Bandsaw Mitre Head  Heavy duty Structural steel machine   Standard Accessories: - M42 Bi-metal saw blade   - *Variable speed  - Inverter control device Lasdperz Uziefx Acfjf - Coolant system - Auto. saw blade breakage power off system - Hydraulic vice - Hydraulic Bow - Blade tension Device - Pendant control - Mitre Vice  - Heavy Duty Gear Box 

Condition: excellent (used), Year of construction: 2012, MTF Technology Year of manufacture: 2012 Lasdpjgv Atyefx Acfjf L. 160 cm + 130 cm W. 40 cm + 30 cm H. 50 cm

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: FAGOR, table width: 660 mm, table length: 1,500 mm, table load: 1,200 kg, This Micromill VMC 1300 Vertical Machining center was manufactured in the year 2007. It is equipped with a Fagor control unit. Machine Benefits Technical Machine Benefits • Tool storage // tool megazine // tool pocket • Atc • The machine has internal cooling through the spindle 20 bar. Ledjzvv Elepfx Acfsaf Extra Information MACHINE STILL UNDER POWER

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 670mm/430mm/460mm, table dimensions X/Y: 900mm/410mm, max. workpiece weight: 350kg, tool holder: SK40, spindle speed: 8000rpm, spindle inner diameter: 60mm, max. spindle-to-column distance: 460mm, rapid traverse: 24m/min, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 2200mm/2050mm/2500mm, weight: approx. 3700kg, control: Heidenhain TNC 620, operating hours: approx. 21550h, spindle hours: approx. 3500h. Documentation available. An on-site inspection is possible. Lsdpfx Acoxq Exdefjaf

Condition: good (used), Used, insulated stainless steel storage tank Item number: 10216 Last known use: Unknown Volume: 1500L Type: Standing on legs Material (in contact with media): 1.4301 / AISI304 Design: Insulated Bottom: Conical bottom Top: Conical top Operating pressure according to nameplate: ATM Tank dimensions: Tank diameter: 1390mm Distance from outlet to bottom: 290mm Overall height: 2400mm Height of legs: 770mm Cylindrical height: 1400mm Overall width: 1400mm Lodpedxwqdjfx Acfsaf Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Features: Cylinder and bottom insulated Vent pipe Manhole cover on the top 5x nozzles on the top, DIN11851

Condition: new, ProMinent DGMA330T010 Flow sensor, serial number: 2011115558, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Lajdpfozp Tphsx Acfef

Condition: used, Year of construction: 2016, Overview This brew house was built in 2016 by Spanish manufacturer Prominox Villarobledo and has a wort volume of 30 hectoliters. Fermentation and storage cellars and various accessories are included. All the equipment has already been dismantled and stored. Scope of delivery  - Electrical panels for tanks and pumps - Stainless steel tank | model DFF99 | 2000 | 25,000 liters - Labeler | model MC-220 | 2016 | 1300 bph (up to 1.5 liters) Lodpotzg H Dofx Acfsaf - Filler | model AM DPS 811G | 2016 | 1200 bph (0.33 liters) - Sealer | model SK2 | 2016 | Semi-automatic box sealer, motor speed: 20 m/min, power: 0.13 hp - 2x Horizontal tank | model AD MERKBLATTER | 2016 | Isobaric 3,000 liters - 2x Fermentation tank | 3,000 liters - 2x Fermentation tank | model PROMINOX | 2016 | 5,000 liters - Open tank - Low tank | model STORK TGSW - Filter | model PSF JB | 2017 - Grinder | model OOEHLER OL 6000 | 2016 - Silo and feeder - Resistance tank | model PROMINOX | 2016 | 3,000 liters - 2x Brewing/mashing tank | model PROMINOX | vertical | 2016 | 3,265 liters - Filter tank | model PROMINOX | 2016 | 4,500 liters - 2x Pump | model MIM GRUP FL31Cl - Pump | model CALPEDA MXH 204/A - Industrial scale | model GRAM MISSIL F2-60 - Pump | model LOWARA HTB 32-125/30 - Pump | model ABB INOX MIM GRUO FLUID-102 - Industrial sink - Refrigeration chamber - Pump | model PYD SH2-40 - Osmosis system | model HIDROTEC - Water treatment system - Cooling system | model AIRWELL AQVH,125BLN,R410A,BFC,1P | 2010 - Compressor | model INGERSOLL-RAND 11BAR | 2001 - Boiler | model ATTSU RL-400/12 - Forklift | model NICHIYU FB18PN-55-450 PS PL | 1999

Condition: used, axle configuration: 2 axles, first registration: 11/2024, Year of construction: 2024, Usable material: Concrete Laodpfxjzfy Nyj Acfjf Value-added tax/differential taxation: VAT deductible Please contact Harun Cevik, Jamila Azzi, Henri Omeragic, or Denis Omeragic for further information.

Condition: excellent (used), Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 2017.041.XM.400.004, space requirement length: 6,700 mm, space requirement width: 3,200 mm, space requirement height: 5,000 mm, This is a combination of a hot mixer and a cooler. A typical application is mixing polymers with additives. Hot mixer: working volume of 400 liters, drive power 90 kW, mixing impeller with a tip speed of up to 60 m/s. Vacuum system included (but needs optimization). Filling hopper included. Gravimetric scales for the additives are not included in the delivery. Cooling mixer, volume 1200 liters with a 11 kW drive, cooling jacket for cold water flushing, outlet with a valve. The combination includes the entire steel structure with walkways, control cabinet with frequency converter (400 VAC/50Hz) for the variable drive of the hot mixer. Additional documents can be provided upon request. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet. Lajdpfx Acezl Td Rjfof

Condition: good (used), Crane remote control, crane control, crane control, pendant control, control switch, control unit, control control -Manufacturer: Elprom-Iskra, control switch for crane remote control Ljdpfjzmfdljx Acfjaf -Type: AKPT-64 -Dimensions: 245/65/55 mm -Weight: 0.4 kg

Condition: excellent (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1615 mm Y-axis: 815 mm Z-axis: 725 mm Ljdpfxsyy Npno Acfoaf Table load: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Footprint (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special features: • CNC control system FAGOR 8055 i/PLUS MS • Internal coolant supply through the spindle, 20 bar • 24-position tool changer • Hinged chip conveyor • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, axle configuration: 3 axles, color: white, Year of construction: 2026, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = EUROMIX MTP 12 cbm mixing semi-trailer EUROMIX MTP - Mobile mixer unit EM 12 R - Standard Model: EM 12 R Nominal volume 12 m³ ready-mix concrete Mixing drum in standard design Mixing drum in standard design made of S355 material Mixing blades in standard design made of S420 MC material Gearbox manufacturer: ZF P5300 Hydraulic pump: Bosch Rexroth Hydraulic motor: Bosch Rexroth Oil cooler system integrated Mixing control: mechanical, start/stop electrical Compressed air water system Water connection on the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with one service hatch Ladder with platform Laedeym Sy Ujpfx Acfjf Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute and swiveling chute Drum locking to secure the drum during maintenance Polyurethane primer Weight approx. 4,725 kg, deviations +/- 5% with emergency stop function according to EU safety standards Mud flaps made of steel over the rear axles 2 x extension chutes made of steel or plastic Water system Water tank 650 l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection: "C" coupling Operation & Electrical System Mixer operation – mechanical, rear Start-stop system (with EDC) Geometric volume 19420 L Volume water tank 12787 L Tank inclination 10.5 Length 7545 mm Width 2300 mm Height 2765 mm Engine: FTP 55 kW Mounted on Euromix MTP 3-axle semi-trailer Vehicle type: Euromix MTP KIS 24 3-axle mobile mixer chassis Axles with short steering ratio (310/340) for ready-mix concrete operation 1 included Axle 9 tons SAF 22.5" disc brake, single tire for air suspension 3 included Axle track width: 2040 mm (standard dimension) 3 included Axle distance approx. 1400 mm / 1400 mm 1 included EBS braking system Tires 385/65 R 22.5 Plastic mudguards, 180 degrees, above each axle (for 3 axles) 1 included Chassis paint in RAL 9005 deep black 1 included KTL with zinc phosphating plus powder coating, maximum corrosion protection (only with 1 included powder coating available) Tire pressure monitoring system basic version, connected to the CAN-bus system of the EBS 1 included 24 ton telescopic support leg with single-sided operation and 1 included Semi-round with base plate Axle loads: 24,000 kg (3 x 8000 kg, technically: 3 x 9000 kg) 1 included Chassis length approx. 8570 mm 1 included For further questions, our team is available in the following languages. We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further information = Year of construction: 2026 Usable material: Concrete GVWR: 44,000 kg Brand of the superstructure: Euromix MTP EM 12 R Please contact Harun Cevik, Jamila Azzi, Henri Omeragic or Denis Omeragic for further information.

Condition: new, fuel type: diesel, fuel: diesel, Year of construction: 2026, EuromixMTP - Stationary Concrete Mixer - Superstructures from 4m³ to 15m³ (IMMEDIATELY AVAILABLE) WHY EUROMIX MTP? MARKETS ARE CHANGING – OUR AIM REMAINS TO PROVIDE YOU WITH GENUINE ADDED VALUE! We are responding to this market situation and have set ourselves the goal of meeting your requirements and seeing our market success as dependent on your market success. We believe in the win-win principle, which is our understanding of a successful and sustainable partnership! Our aim is to offer you genuine added value that will make you more efficient and competitive, and thus contribute to securing your success. We always have the right solution for the transport of concrete! Depending on your requirements, you, as our customers, can choose between different loading capacities and concrete mixer variants. EUROMIX REGULAR (R) – OUR STANDARD The overall structure and design are characterized by their robustness and durability under the harshest operating conditions, with the reinforced and extremely solid frame construction being the centerpiece. The center of gravity is extremely low and, in combination with an optimized load distribution, offers you increased safety in the various work phases of filling, transport and unloading. Solid and robust machine engineering for your application! Ljdpfjym Szlox Acfeaf EUROMIX LIGHT (L) & SUPER LIGHT (SL) – OUR LIGHTWEIGHT VERSIONS Weight savings are important, on the one hand, for countries with axle load restrictions, and, on the other hand, in general, to increase the payload. The advantages are primarily an optimal use of resources and a reduction in costs per cubic meter of concrete transported! In both cases, we offer you the optimal solutions with our concrete mixer variants L (Light) and SL (Super Light), which are leading both in terms of weight savings and durability. Increased transport efficiency – more payload through less dead weight! WE MEASURE OURSELVES AGAINST YOUR REQUIREMENTS AND WOULD LIKE TO SET NEW INDUSTRY STANDARDS TOGETHER WITH YOU! = Further information = Year of manufacture: 2026 Usable material: Concrete Superstructure brand: EuromixMTP Please contact Harun Cevik, Jamila Azzi, Henri Omeragic or Denis Omeragic for further information.

Condition: new, axle configuration: 2 axles, color: white, Year of construction: 2026, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = EUROMIX MTP 10 cbm mixing semi-trailer - New - 2-axle - SAF axles - 1x lift axle - air suspension ABS - Tires 385/65 R22.5 - Gross vehicle weight approx. 36,000 kg - Tare weight approx. 7,640 kg - Separate motor EUROMIX MTP - Mobile mixer body EM 10 L - Lightweight design Lasdpfeym Tacjx Acfof Model: EM 10 L Nominal volume 10 m³ ready-mix concrete Lightweight mixing drum Lightweight mixing drum made of HARDOX S450 material Lightweight mixing spirals made of HARDOX S500 material Gearbox manufacturer: ZF P5300 Hydraulic pump manufacturer: Bosch Rexroth Hydraulic motor manufacturer: Bosch Rexroth Oil cooler system integrated Mixing control: mechanical, start/stop: electric Compressed air water system Water connection at the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with one service flap Access ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge chute and swiveling chute Drum locking for securing the drum during maintenance work Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety standards Mudguard made of steel above the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500 l (compressed air) Water tank made of steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling Operation & Electrical system Mixer operation – mechanical at the rear Start-stop system (with EDC) Geometric volume 17361 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Special equipment: Extension chute plastic - steel - aluminum Folding chute plastic (or steel) Retaining flap swiveling chute Plastic box Dust box stainless steel Additive container non-pressurized Additive pressure container Trowel holder ¾ drum closure Rear view camera LED work light EuromixMTP Intelligent drum control (electronic mobile mixer control) Step on the underrun protection with handrail Water meter Pressure gauge Frame cover Fire extinguisher Holder for self-compacting concrete hose (5 m long) Transition piece to the self-compacting concrete hose (reducing chute) Hydraulic chute support For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further information = Year of construction: 2026 Usable material: Concrete GVWR: 38,000 kg Body brand: EuromixMTP EM 10 L APK (Technical inspection): New TÜV upon delivery Please contact Harun Cevik, Jamila Azzi, Henri Omeragic or Denis Omeragic for further information.

Condition: new, axle configuration: 2 axles, color: white, Year of construction: 2026, = Additional Options and Accessories = - Air suspension = Notes = EUROMIX MTP 10 cbm mixing semi-trailer (Rental possible) Empty weight approx. 6400 kg (trailer only) - New - 2-axle - 10-ton SAF axles - 1x lift axle - air suspension, ABS - Tires 385/65 R22.5 - Technical total weight 38,000 kg EUROMIX MTP - Mobile mixer body EM 10 L - Lightweight design Model: EM 10 L Nominal volume 10 m³ ready-mix concrete Mixing drum in lightweight design Mixing drum in lightweight version made of HARDOX S450 material Mixing spirals in lightweight version made of HARDOX S500 material Gearbox manufacturer ZF P5300 Hydraulic pump manufacturer Bosch Rexroth Hydraulic motor manufacturer Bosch Rexroth Oil cooling system integrated Mixing control mechanical, start/stop electrical Compressed air water system Water connection on the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with a service hatch Ladder with platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in filling hopper, discharge pan, and swiveling chute Drum locking to secure the drum during maintenance Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety standards Mud flaps made of steel above the rear axles 2x extension chutes made of steel or plastic Water system Water tank 500 l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling Operation & Electrical Mixer operation – mechanical at the rear Start-stop system (with EDC) Geometric volume 17361 L Volume water tank 11121 L Tank inclination 11.3 Length 7075 mm Width 2300 mm Height 2748 mm Special equipment: Extension chute plastic - steel - aluminum Folding chute plastic (or steel) Retaining flap swiveling chute Plastic box Dust box stainless steel Additive tank non-pressurized Additive pressure tank Trowel holder ¾ drum closure Rear view camera LED work light EuromixMTP Intelligent drum control (Electronic mobile mixer control) Step on the underrun protection with grab handle Lajdpfeym Szfjx Acfof Water meter Pressure gauge Frame cover Fire extinguisher Holder for self-compacting concrete pipe (5 m long) Transition piece for self-compacting concrete pipe (reducing chute) Hydraulic chute support For further questions, our team is available in the following languages. We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Additional Information = Year of construction: 2026 Usable material: Concrete GVW: 38,000 kg Make of the body: EuromixMTP EM 10 L Please contact Harun Cevik, Jamila Azzi, Henri Omeragic, or Denis Omeragic for further information.

Condition: new, axle configuration: 3 axles, first registration: 01/2026, color: blue, Year of construction: 2026, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Notes = EuromixMTP semi-trailer, 27m³ (HARDOX), 3-axle - NEW - without registration - - Type: EuromixMTP AMT 27 (27m³) or 24m³ - Axles: SAF - B9 ton - 1 lift axle - ABS EBS - Air suspension - Disc brakes - Tires: 385/65 R 22.5 - Payload: 28900 kg - Tare weight: 6600 kg - Hopper: Hardox 400 - 450 - Floor: 6mm - Side, front, and rear walls: 5mm - Penta cylinder - CE Accessories: - Hydraulically opening rear wall - Tarp (manual or electric) - Chute for asphalt - Toolbox - Shovel and broom holder - Fire extinguisher - Work light - Sliding tarp (manual or electric, with or without tarp protection roof) - Foldable under-run protection systems - Partial unloading for small areas EuromixMTP semi-trailer, 27m³ (HARDOX) - NEW - without registration - - Type: EuromixMTP AMT 27 (27m³) Lasdpfxsym Tdbe Acfof - Axles: SAF - B9 ton - 1 lift axle - ABS EBS - Air suspension - Disc brakes - tires 385/65 R 22.5 - Payload: 28400 kg - Tare weight: 6900 kg - Body: Hardox 400 - 450 - Floor: 6mm - side, front, and rear wall: 5mm - Penta cylinder - CE Accessories: - Hydraulically opening rear wall - Tarp (manual or electric) - Chute for asphalt - Toolbox - Shovel and broom holder - Fire extinguisher - Work light - Sliding tarp (manual or electric, with or without tarp protection roof) - Foldable under-run protection systems - Partial unloading for small areas EUROMIX DUMP TRUCK – DURABLE AND ROBUST FOR YOUR USE For further questions, our team is available in the following languages. We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further Information = Rear axle 1: Lift axle GVWR: 44,000 kg APK (Technical Main Inspection): New TÜV upon delivery Please contact Harun Cevik, Jamila Azzi, Henri Omeragic, or Denis Omeragic for further information.

Condition: new, Year of construction: 2026, NEW EuromixMTP Drum Mixer - Capacity from 4 m³ to 15 m³ - CE standard - HARDOX - Mounting on any chassis is possible For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по-русски Govorimo Srpskohrvatski Lasdpfx Aoym Sxwscfsf = Further information = Year of manufacture: 2026 Usable material: Concrete Please contact Harun Cevik, Jamila Azzi, Henri Omeragic, or Denis Omeragic for more information.