Used Rss Transportbanden for sale (172)

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Nsdpfx Asfi Nmpja Roda Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: new, axle configuration: 3 axles, loading space length: 10,636 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, loading space volume: 60 m³, Chassis manufactured using a self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, component chassis made of ALUMINUM, 140 mm frame height! (max. 39 tons) Axles and Suspension "Disc brake 22.5" Jost axle assemblies, 3 x 9 tons with DC air suspension, lifting and lowering function, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the central control unit (without central control unit equipment), 1st + 3rd axles can be lifted separately with an assistance function (without central control unit equipment), 3rd axle additionally equipped with Optiturn, ECAS air suspension, tire pressure monitoring Wabco Trailerpulse with ZF rim-mounted sensors Tires and Wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice, Alcoa aluminum rims DuraBright-11, 75x22.5 ET 120 kingpin screwed into a 10 mm thick plate Nodofakkcjpfx Aa Reda Fifth Wheel Aluminum swivel landing gear, 2 x 10 tons support load, for air suspension, we use swivel feet Braking System According to E.G. standard, two-line braking system, EBS E-system Wabco with RSS system (Roll Stability Support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical System According to STVZO guidelines with 2 LED five-chamber lights type Aspöck Europoint LED integrated in the aluminum rear panel, 24-volt system with 1x 5-pole and 2x 7-pole socket, with side marker lights in LED design, 2 separate LED work lights at the rear, 2 LED work lights on the side starting at the 1st axle, at the height of the fifth wheel supports, 1 LED work light inside, at the front left, operated from the outside Body/Tipping Body "Body fully welded inside" Front wall load 17,250 dkn, rear and side walls 10,250/13,400 dkn, aluminum tipping body, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross members, floor load approx. 7 tons/m2, cross members mounted at a relatively close spacing (approx. 350 mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors, 50/30 mm thick, with 4 swivel rod locking mechanisms, attached in the welded aluminum rear frame in Teflon and stainless steel bearings, moving aluminum side wall suspended on the reinforced aluminum upper belt with "Kevlar liner for complete emptying, lateral brush seal and additional Kevlar liner on the side, integrated discharge chute with foldable cover plate in the floor end, operable from the outside, left rear, viewing window at the rear left, 1 sample slide in the rear doors, thus 2 pieces, service door at the front left Hydraulic System "Cargo Floor sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 670 PE-HD gliders, approx. 6mm floor thickness, hydraulics with approx. 200 mm working stroke, fixed mountings on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed mountings, line size NW 21, fixed mountings with a size and design to be specified, operating pressure 190 max. 240 bar, aluminum end pieces welded into the floor, electrical operation at the rear left with cable operatio

Condition: good (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 781921, For sale is a used mixer (paddle mixer) with a lifting tipper for standard trolleys from April 2022, in very good condition. This mixer was used for approximately 10 hours in April 2022 and has not been used since. The manufacturer is Laikidis from Greece, and the machine was purchased from Barsso in Belgium. Dimensions are visible in the pictures. All certificates, wiring diagrams, and operating manuals will be provided upon request. All pictures were taken upon delivery of the machine; the current condition shows minimal signs of use. Ndsdpfoyvrabsx Aa Rsa

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 40 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, Westinghouse two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, Edbro hydraulics with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, preparation for floor vibrator, mud-tight! Nsdpfx Aju Dvw Eja Roda FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ Transfer costs *Pictures and offers are subject to change*

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, two-line system, spring system, brake system according to E.E.G. standard. standard, two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, hydraulics make Edbro with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, skip also mud-tight on request! Combi door 2/3-1/3 divided with grain slider and autom. pneum. Locking FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE Ndjdju Dvw Sspfx Aa Rsa +590¤ transfer costs Also available in the variants Z9-Z13 *Pictures and offers are subject to change*

Year of construction: 1992, condition: good (used), Geuma welding roller set, welding positioner set type GRS-SPE in neat good working condition consisting of: Nsdpfx Aolzcibsa Roda 1 x driven 3 x guide wheels Specifications: - 7 kW - max capacity 31 tons - diameter idlers 550mm - width 2 wheels side by side 950mm - center of wheels from under frame 340mm - maximum adjustable width 2500mm

Condition: new, maximum load weight: 29,260 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Technical Data: Model and Manufacturer * Model: Kässbohrer K.SLA R 3 / 1N - 18 / 30 * Manufacturer: Kässbohrer * Type: Extendable lowbed semi-trailer with wheel recesses, suitable for transporting vehicles and heavy machinery. Dimensions * Total length: 13,190 mm * Gooseneck length: 3,950 mm * Platform length: 9,240 mm * Extension: 3,500 mm (Pe) * Overall width: 2,550 mm (extendable by 600 mm with side extensions) * Saddle height: 1,250 mm * Platform height: 875 mm * Ramp length: 2,750 mm * Ramp width: 850 mm * Wheelbase: 7,800 mm * Axle spacing: 2,260 mm Weights and Load Capacities * Gross vehicle weight rating: - 52,800 kg at 60 km/h - 48,000 kg at 80 km/h * Unladen weight: 12,744 kg ±3% * Axle load capacity: 30,000 kg (10 tonnes per axle) * King pin load capacity: 18,000 kg Nodpju Tarpjfx Aa Rsda Axle Equipment * Number of axles: 3 (2 rigid at front, 1 trailing axle at rear) * Lift axle: Manually load-dependent (1st axle) * Axle make: BPW axles with drum brakes Tyres and Wheels * Tyre size: 245/70 R17.5 * Brand: GOODYEAR * Tyre markings: M+S label and 3PMSF marking * Tyre pressure monitoring system: Increases fuel efficiency and extends tyre life * Number of wheels: 12 (steel rims with ET120 offset) Chassis and Suspension * Suspension: Air suspension with load gauge * Brake system: Two-line compressed air brake by WABCO, EBS 4S/3M with ABS and RSS (roll stability control) Lighting and Electrics * Lighting system: 24V, multi-chamber lamps by ASPÖCK, LED side markers and tail lights * Coupling type: Standard yellow/red for air supply connection * Connectors: NATO socket with 2 x 50mm² intermediate cable (3 m length) Ramps * Ramp type: Foldable hydraulic loading ramps with sliding mechanism * Capacity: 40 tonnes * Ramp floor: Made of hardwood * Safety features: Ramp safety tension chain included Load Securing * Lashing rings: - 2 x 2 with 5,000 daN capacity each - 1 x 2 with 10,000 daN capacity at the gooseneck - 4 x 2 lashing rings with 6,000 daN in the recess area * Container lock cases: Suitable for transporting 1 x 20 FT or 1 x 30 FT container * Stake pockets: 5 x 2 stakes (50 mm x 100 mm) Special Features * Gooseneck: With 90° vertical corners, robust and durable * Floor covering: 45 mm thick hardwood and steel deck with checker plate * Wheel recess bridge: Removable hardwood bridge sections with steel supports to cover wheel recesses * Toolbox: PVC-coated steel, dimensions 750 x 400 x 360 mm Colours * Chassis: Traffic red (RAL 3020) * Partial metallization of contact surfaces Condition * New and immediately available. * Perfectly suited for heavy haulage and use in construction or machinery relocation.

Condition: used, Year of construction: 2005, SPACESACER SS2101 rod feeder year 2005 Ndjdpfswcgdnsx Aa Rea used - efficient

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) Ndodpsw U H Sbjfx Aa Roa * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: B42523, Operating principle: The separator separates injection-molded plastic parts from the sprues by means of a rotating screw/roller, based on the different component sizes. Condition: Like new! Ndjdpfx Aajzau Uhj Roa

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Lightweight chassis version Made of aluminum (15-6-12) Two fully automatically welded I-section longitudinal beams with welded cross members. Chassis width: 1,600 mm Axles and suspension: Disc brake 430 mm Jost (formerly Mercedes DCA) axle units, 3 x 9 tons, with air suspension, air springs arranged centrally to the chassis longitudinal beam. First axle can be lifted with starting assist and manual forced lowering. Smart Board information center, lift/lower valve, BVA brake wear indicator. Tires and wheels: 6 wheels with tires size 385/65 R22.5, from various manufacturers (manufacturer's choice), with steel rims 11.75 x 22.5 ET 120. Fifth wheel: Mechanical version with single-sided operation in 2 speeds with pivoting base for air suspension. Braking system: Ndsdpfxefi Nmus Aa Roa According to E.G. standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS incl. RSS (Roll Stability System) and Premium modulator, Wabco Smartboard information center, aluminum air tank system. Electrical system: According to STVZO guidelines, with 2 five-chamber lights, type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x5-pole sockets, with side marker lights, 2 separate LED rear lights, 1 LED interior light. Tipping body/dump bed: Internally fully welded. Aluminum dump bed, side walls with 30 mm thick plank profiles (2-3 mm) welded together, 600 mm wide. Floor made of 8 mm thick, highly wear-resistant alloy (5383H34/HB 110). Front wall reinforced, 4 mm thick, in a straight design. Rear wall as a universal door in a straight design with 2-wing doors in a 2/3-1/3 configuration, with a grain slide, or alternatively in a 1/2-1/2 configuration with a grain slide on each side. Aluminum round profile welded on the side and bottom for sealing the door gap on the rear doors. Rear doors partially covered with smooth aluminum. Operation of the universal door automatically pneumatic with separate lever that can be locked. Rear supports made of aluminum, can be swung out. Two retaining straps with rubber buffers on the tipping body, attached to the frame at the front wall. Hydraulic system: Tipping cylinder with large cylinder body Hydraulic cylinder mounted on the front wall with a max. working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and quick-release coupling 1", tipping angle approx. 48 degrees. Accessories: 6 Parlok fenders, complete mud flaps covering the entire vehicle width attached to the U-profile. Aluminum spare wheel holder. Folding side impact protection on the right side. Large tool box, type 860. Approx. 3 m aluminum ladder. 3 aluminum swing supports mounted centrally, approx. 150 mm higher. Additional centrally mounted support receiver for positioning a total of 2 supports to increase the loading width. Tarpaulin with a central light strip and separate reinforcements in the wear areas, approx. 660 gr./m2 quality, with tarpaulin system. Circumferential rubber rope in the rear end of the tarpaulin to be attached to two tension hooks on the rear swing support. Walkway on the frame in chassis color. Tarpaulin closure with quick-release fastener. Tarpaulin end at the rear with welded-in rubber rope to prevent water ingress. Robust folding underrun protection with two towing eyes left and right incl. locking pin. 2 "Clear-Pass" mud flaps on the fender according to EG standard, attached to the frame on the side. Aluminum grain chute with tarpaulin bag attached to the frame on the side. Holder for s

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 9,5 kW dimensions of the machine (l x w x h) : ± 2.100 x 1.070 x 1.150 mm Nedpfx Aszwlmuoa Roda capacity : ± 2.500 kg / h for blocks of max. ± 470 X 600 X 200 mm 3 x 400 V

Condition: new, maximum load weight: 25,160 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 1,380 mm, total width: 2,550 mm, total height: 1,410 mm, Year of construction: 2026, Equipment: ABS, Wiese Building Material Semi-Trailer Fifth-wheel load: 12,000 kg Axle load: 27,000 kg Permissible gross vehicle weight: 39,000 kg Curb weight: 10,840 kg Loading platform length: approx. 9,200 mm Overall length: approx. 10,600 mm Internal width: 2,480 mm Overall width: 2,550 mm Kingpin 1 position with 2" kingpin Coupling height In horizontal position: approx. 1,160 mm Top edge of main beam (without floor): approx. 1,380 mm Loading height: approx. 1,410 mm Lashing hole external frame D=30 mm with perforated strip at angle (160 mm high / 30 mm floor recess / 4 mm wall thickness), Main beam spacing 980 mm (center/center) - 1,130 mm (outer/outer) Axles 3 axles, each with 9,000 kg load capacity Brand: SAF with disc brakes D=430 mm Track width: 2,040 mm ABS: 1 axle sensed Axle spacing: approx. 1,510 mm / approx. 1,510 mm Suspension Original SAF air suspension, with raise/lower valve with retaining cables Axle lift Lifting axle, 1st axle, automatic load-dependent for starting assistance, controllable via push button in driver’s cab Steering Mechanical forced steering on axle 2 + 3 Two-bar steering / Manufacturer: Tridec Brake system 2-line Wabco compressed air braking system according to EU directive 71/320/EEC etc. with: EBS/ABS 2S/2M with RSS function (Roll Stability Support) and 7-pin socket 1x ISO coupling head yellow 1x ISO coupling head red Spring-loaded parking brake on 2 axles all fitted with quick couplings Aluminum air reservoir Air system Compressed air installation with: 1x raise/lower valve 1x level control valve Aluminum air reservoir all fitted with quick couplings Automatic lowering of air suspension during crane operation Tires 6 units type: 385/65 R22.5" Brand: at manufacturer’s choice Tire pressure monitoring system for all 6 tires, display in driver’s cab Rims 6x steel rim 11.75x22.5", 10-hole, center-mounted, offset: 120mm Support device Mechanical landing legs with T-swivel foot, permitted lift load: 2x 12,000 kg Operable from one side, two speeds Ndodsyihg Hjpfx Aa Rja Brand: at manufacturer’s choice Wheel covers & mud flaps 6x plastic half-shell wheel covers Mudguard mounting reinforced with flat steel Note: mudguard on steered axle 3 with internal cutout Lighting system 24V lighting system according to EU directive 76/756/EEC etc. with: 2x multi-chamber tail lamps Lane marker lamps License plate lighting LED side marker lamps with indicator function 2x 7-pin and 1x 15-pin connector installed as per EU standard Tail lights mounted in reinforced light carrier = certified rear underrun protection All necessary markings Additional installation: Electrical connection for crane control pre-installed as specified! Safety equipment Side underrun protection and rear underrun protection in aluminum according to EU directives Floor OKULEN floor 32 mm Superstructure Straight front wall, 1,200 mm high, welded solid, consisting of 4x steel profiles, welded to the front plate with aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading Straight rear wall, 1,100 mm high, welded solid, consisting of 4x steel profiles, welded to rear plate and aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading, 2x3 aluminum side walls, 1,100 mm, foldable and lowerable On rear side panels, left and right, folding steps as access and grab ha

Condition: new, maximum load weight: 25,160 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 1,380 mm, total width: 2,550 mm, total height: 1,410 mm, Year of construction: 2026, Equipment: ABS, Wiese Building Material Semi-Trailer Fifth-wheel load: 12,000 kg Axle load: 27,000 kg Permissible gross vehicle weight: 39,000 kg Curb weight: 10,840 kg Loading platform length: approx. 9,200 mm Overall length: approx. 10,600 mm Internal width: 2,480 mm Overall width: 2,550 mm Kingpin 1 position with 2" kingpin Nedpfx Aasyl D Eye Rsda Coupling height In horizontal position: approx. 1,160 mm Top edge of main beam (without floor): approx. 1,380 mm Loading height: approx. 1,410 mm Lashing hole external frame D=30 mm with perforated strip at angle (160 mm high / 30 mm floor recess / 4 mm wall thickness), Main beam spacing 980 mm (center/center) - 1,130 mm (outer/outer) Axles 3 axles, each with 9,000 kg load capacity Brand: SAF with disc brakes D=430 mm Track width: 2,040 mm ABS: 1 axle sensed Axle spacing: approx. 1,510 mm / approx. 1,510 mm Suspension Original SAF air suspension, with raise/lower valve with retaining cables Axle lift Lifting axle, 1st axle, automatic load-dependent for starting assistance, controllable via push button in driver’s cab Steering Mechanical forced steering on axle 2 + 3 Two-bar steering / Manufacturer: Tridec Brake system 2-line Wabco compressed air braking system according to EU directive 71/320/EEC etc. with: EBS/ABS 2S/2M with RSS function (Roll Stability Support) and 7-pin socket 1x ISO coupling head yellow 1x ISO coupling head red Spring-loaded parking brake on 2 axles all fitted with quick couplings Aluminum air reservoir Air system Compressed air installation with: 1x raise/lower valve 1x level control valve Aluminum air reservoir all fitted with quick couplings Automatic lowering of air suspension during crane operation Tires 6 units type: 385/65 R22.5" Brand: at manufacturer’s choice Tire pressure monitoring system for all 6 tires, display in driver’s cab Rims 6x steel rim 11.75x22.5", 10-hole, center-mounted, offset: 120mm Support device Mechanical landing legs with T-swivel foot, permitted lift load: 2x 12,000 kg Operable from one side, two speeds Brand: at manufacturer’s choice Wheel covers & mud flaps 6x plastic half-shell wheel covers Mudguard mounting reinforced with flat steel Note: mudguard on steered axle 3 with internal cutout Lighting system 24V lighting system according to EU directive 76/756/EEC etc. with: 2x multi-chamber tail lamps Lane marker lamps License plate lighting LED side marker lamps with indicator function 2x 7-pin and 1x 15-pin connector installed as per EU standard Tail lights mounted in reinforced light carrier = certified rear underrun protection All necessary markings Additional installation: Electrical connection for crane control pre-installed as specified! Safety equipment Side underrun protection and rear underrun protection in aluminum according to EU directives Floor OKULEN floor 32 mm Superstructure Straight front wall, 1,200 mm high, welded solid, consisting of 4x steel profiles, welded to the front plate with aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading Straight rear wall, 1,100 mm high, welded solid, consisting of 4x steel profiles, welded to rear plate and aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading, 2x3 aluminum side walls, 1,100 mm, foldable and lowerable On rear side panels, left and right, folding steps as access and grab ha

Condition: new, maximum load weight: 26,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,450 mm, loading space width: 2,550 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, WIESE 3-Axle Low Loader with Ramps and Wheel Wells – NEW Availability: approx. 4 months from order --- Vehicle Data Manufacturer: WIESE * Type: WSA 3-36 TL * Year of manufacture: 2025 * Axles: 3 * Gross vehicle weight: 39,000 kg Ndsdpfxsyuq Igj Aa Rea * Fifth wheel load: 12,000 kg * Axle unit load: 27,000 kg * Unladen weight: approx. 9,500 kg * Tyres: 235/70 R17.5 * Brakes: WABCO EBS with RSS --- Dimensions * Load platform length: 13,450 mm * Low bed length: approx. 9,550 mm * Fifth wheel section: approx. 3,640 mm * Overall width: 2,550 mm * Low bed loading height: approx. 920 mm * Fifth wheel height: approx. 1,250 mm --- Features * 3 SAF axles (9 t) with air suspension * 1st axle lift axle * 3rd axle trailing steering axle (lockable) * Electronic air suspension E-TASC * WABCO EBS brake system with Roll Stability Support * Tyre pressure monitoring system for 12 tyres * Full LED lighting * 4 x LED work lights * 15-pin + 2x 7-pin power sockets --- Structure * Robust steel frame * 28 mm hardwood floor / Omega deck * 13 pairs of lashing rings (8,000 kg) * Additional lashing points (5,000 daN) * 2 pairs of wheel wells * Excavator arm recess * Removable aluminium side boards on the gooseneck * Front toolbox --- Ramps * 2 x aluminium access ramps * Dimensions: approx. 2,800 x 600 mm * Load capacity: 27,460 kg * Spring lifting mechanism * Laterally adjustable --- Miscellaneous * Warning boards for oversize up to 3 m * Conspicuity marking according to ECE-R48 * Technical documentation and TÜV certificate For further information, please do not hesitate to contact us.

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Nsdpfxofi Nmwe Aa Rjda Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice Ndsdey Auhzjpfx Aa Rea * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, mileage: 25 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 3,550 kg, maximum load weight: 3,950 kg, overall weight: 7,490 kg, tire size: 205/75/R17,5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, loading space length: 6,100 mm, loading space width: 2,480 mm, Equipment: ABS, air conditioning, central locking, differential lock, immobilizer system, trailer coupling, - Fuso 9C18 new model with aluminum flatbed body L 6.00 x 2.30 x 0.50m, available for immediate delivery, Fuso chassis on site - Slim version, traffic safety options with standard 2.3m platform width or custom width available - Delivery time approx. 2 months, reference vehicles, chassis, and bodies on site - Flashing side marker lights for increased safety - Comfort driver’s seat and double passenger bench - Automatic air conditioning - Automatic transmission (Duonic) - Wheelbase: 4.75m – GVW 8,550kg, derated to 7,490kg, unladen weight: 3,480kg, payload approx. 4,010kg (GVW 8,550kg possible without modification, payload then approx. 5,070kg!) - 2x storage boxes - Optional: 3,500kg tow bar, reversing camera, beacon lights, work lights, rear strobe lights optional, front bulkhead vision panel - Subject to errors and prior sale! More information and XXL images on our homepage. For inquiries in English please call ... Ndsdpfxjzv Nuge Aa Roa Features: air conditioning, automatic climate control, automatic gearbox, VAT deductible, ABS, radio, heated mirrors, electric front windows, immobilizer, central locking with remote, tow bar, power steering, differential lock, outside temperature display, electrically adjustable mirrors, tachograph, spare wheel, cab: local sale, heat-insulating glazing, new, emission standard: Euro 6, diesel, rear-wheel drive, very good condition, consumption: 0.0/0.0/0.0 l/100km (combined/urban/extra-urban), available for rent, emission sticker: 4 - green

Condition: new, Year of construction: 2026, functionality: fully functional, MEMBRANES FOR MEMBRANE AND VACUUM PRESSES Made of silicone or natural rubber We offer high-quality silicone and natural rubber membranes for all common membrane and vacuum presses. Our membranes are available cut to your required dimensions or as roll material. SILICONE MEMBRANE MS2 Type: MS2 Material: Silicone Colour: Milky white Surface: Smooth/textured Maximum production width: 2,000 mm Shore hardness: 50 ± 3 Shore A Thickness: 3.0 mm Operating temperature: –50 °C to +200 °C SILICONE MEMBRANE MS2-50 Type: MS2-50 Ndsded S Efaspfx Aa Roa Material: Silicone Colour: Milky white Surface: Smooth Maximum production width: 1,800 mm Shore hardness: 50 ± 3 Shore A Thickness: 3.0 mm Operating temperature: –60 °C to +230 °C SILICONE MEMBRANE MS1 Type: MS1 Material: Silicone Colour: Milky blue Surface: Smooth Maximum production width: 1,800 mm Shore hardness: 45 ± 3 Shore A Thickness: 2.0 mm Operating temperature: –60 °C to +230 °C NATURAL RUBBER MEMBRANE MNK-R Type: MNK-R Material: Natural rubber Colour: Brown Surface: Smooth/textured Maximum production width: 2,000 mm Shore hardness: 45 ± 3 Shore A Available thicknesses: 2.5 / 3.0 / 4.0 mm Operating temperature: –20 °C to +125 °C STANDARD SILICONE SHEETING RSS Type: RSS Material: Silicone Colour: Reddish brown or transparent, other colours available on request Surface: Smooth on both sides Standard length: Cut to size or supplied as a 10 m roll, other lengths available on request Standard width: 1,200 mm, up to 1,800 mm available on request Shore hardness: 30–80 Shore A Thickness: 0.5–10 mm SILICONE ROUND CORDS RSC We also offer silicone round cords in various diameters. Type: RSC Material: Silicone Colour: Grey or transparent Standard diameters: 4–12 mm Maximum diameter: 50 mm Shore hardness: 60 ± 5 Shore A Operating temperature: –60 °C to +230 °C We will be happy to help you select the right membrane for your press and application. The stated values are guidelines and refer to normal room temperature. We reserve the right to make changes to the design and dimensions.

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,720 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Ndsdpfx Aaox Iprrj Rsa Internal number: #598 Krüger Vacuum Tanker SSP14-1 AK Mercedes-Benz Actros 2546 L / 6x2 Superstructure * Krüger Fahrzeugbau Vacuum Tanker SSP14-1 AK * Stainless steel tank 1.4301 * Approx. 15,000 liters total volume (air volume) * Approx. 14,000 liters sludge volume (air volume) * Approx. 1,000 liters flushing water volume (air volume) * Unloading via tipping * Outrigger arm available, vacuum hose guide on the outrigger High-Pressure System * Speck / NP30/100-150 * Approx. 100 l/min at 150 bar * Hose reel for flushing hose: approx. 80 m DN 13, hydraulic with freewheel, rear right in the chassis area * Flushing hose: approx. 60 m DN 13, rubber hose Vacuum System * CVS / VacuStar 1600 * Approx. 1,550 m³/h at 400 mbar * Rotary vane pump * Vacuum hose storage cassette * Approx. 20 m DN 125 vacuum hose Special Features * Sound insulation cladding: on the left-hand side in the front of the vacuum pump, can be opened downwards * Equipment cabinet on the right, hose tray on the left * Vise * Waste bin / scrap container * Hand washing facility * Advertising panels L+R on the top of the tank * Work lights: one LED strip per side + 2 LEDs on the outrigger * Rotating beacons: 1x at the rear * Reversing camera * Analog relay control * Remote control * Air conditioning * Navigation system * Hands-free system * Digital car radio DAB+ Technical data * Mercedes-Benz Actros 2546 L * 6x2 * EURO VI * 455 hp / 335 kW * Automatic transmission * Fuel tank: approx. 500 l * Color: Arctic White MB 9147 * Permissible total weight: 26,000 kg * VIN: W1T96302010857317 For further detailed information and/or images, please contact us directly. You can find more vehicles for SALE or RENT here: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any warranty.

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: grey, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,750 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Internal Number: #649 Krüger Vacuum Tanker SSP12-2 GAK Mercedes-Benz Actros 2546 L / 6x2 BL Superstructure * Krüger Fahrzeugbau Vacuum Tanker SSP12-2 * Stainless steel tank 1.4301 * Approx. 14,000 liters total volume (air) * Approx. 12,000 liters sludge volume (air) * Approx. 2,000 liters flushing water volume (air) * Discharge via tipping mechanism * Outrigger arm available, telescoping to 5,500 / 7,000 mm working length High-Pressure System * Speck P55/128-160 * Approx. 128 l/min at 160 bar * Hose reel for flushing hose: approx. 60 m DN 13, hydraulic with freewheel, rear right in the frame area * Flushing hose: approx. 60 m DN 13, rubber hose Vacuum System Nedpfx Aszi Ir Dea Reda * HIBON / VTB 820 VS * Approx. 2,300 m³/h at 400 mbar * Blower pump * Suction hose storage cassette * Approx. 20 m DN 125 rubber hose Special Features * Soundproofing enclosure: lateral sound encapsulation for the blower with hinged door * Equipment cabinet on the right, hose tray on the left * Vise * Trash can / scrap container * Hand washing facility * Advertising panels L+R on the top of the tank * Work lights: 1 LED on each side + 1 LED on the lid * Rotating beacon lights: 1x at the rear * Reversing camera * Analog relay control * Radio remote control * Air conditioning * Navigation * Hands-free system * Digital car radio DAB+ Technical Data * Mercedes-Benz Actros 2546 L * 6x4 * EURO VI * 455 hp / 335 kW * Automatic transmission * Fuel tank: approx. 500 l * Color: MB 7754 Steel Grey Metallic * Permissible total weight: 26,000 kg * FIN: W1T96302410881507 For further detailed information and/or images, please contact us directly. You can find more vehicles for SALE or RENT at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any warranty.

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: #456 Mercedes-Benz ACTROS 2646 L 6x2 BL with Krüger Fahrzeugbau SSP14-1 superstructure Superstructure * Krüger Fahrzeugbau SSP14-1 * Stainless steel tank 1.4301 * Approx. 15,000 liters tank capacity * Approx. 1,000 liters rinsing water * Approx. 14,000 liters sludge volume * Discharge via tipper Vacuum System * CVS VacuStar 1600 * Approx. 1,550 m³/h at 400 mbar * Rotary vane pump * Approx. 60 m DN80 suction hose * Suction hose reel at the rear of the tank * Suction hose holder available High-Pressure System * Speck NP30/100-150 with approx. 100 l/min at 150 bar * Approx. 80 m DN13 rubber hose * Hydraulic reel with freewheel * Position: rear right in the chassis area Special Features * Analog relay control * Remote control * Air conditioning * Navigation system * Hands-free system * Digital car radio DAB+ * Waste container / scrap bin * Vise * Hand washing facility * Rear view camera Ndsdjzayp Djpfx Aa Roa * Work lights: 1 LED on each side and 1 LED light on the tank lid * Rotating beacon at the rear: 1x * Equipment cabinet on the right * Hose tray on the left * Advertising panels on the left and right of the tank Technical Data * Mercedes-Benz ACTROS 2646 L 6x2 * 6x2 * EURO VI * 455 hp / 335 kW * Automatic transmission * Fuel tank approx. 500 liters * Cab color MB 9147 Arctic White * Permissible total weight 26,000 kg * Vehicle condition: New * Vehicle type: Vacuum tanker * VIN: W1T96302910846154 For further detailed information and/or images, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively according to our general terms and conditions and with the exclusion of any warranty.

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, usable tank capacity: 100 l, cooling capacity: 4 kW (5.44 HP), input voltage: 400 V, tank capacity: 100 l, total width: 640 mm, total length: 700 mm, total height: 1,250 mm, input frequency: 50 Hz, DGUV certified until: 09/2027, type of input current: three-phase, Sourdough – Quick – Fermenter Model: Hema BRSSF 100 with external LED control approx. 20 – 100 kg total rye flour with timer Stainless steel design Njdpfx Aaovdkt Rj Reda Connection: 400V, 16A-CEE plug Dimensions: 640 x 700 x 1250 mm Used machine, cleaned with warranty + spare parts service Optional: Delivery service Maintenance contract Service package Instruction and commissioning Many other bakery machines in stock!

Condition: used, OK Supersealer Continuous Bag Sealer Stainless steel Adjustable height Adjustable temperature control for different gauge bags Mobile on castors Bag infeed from right to left The best bag sealer on the market Ndedpfozcff Aox Aa Roa Price € 4,950

Condition: good (used), ZwickRoell Temperature Chamber for AllroundLine Model: TEE160/LN2 40S The TEE160/LN2 40S is a specialized temperature chamber designed primarily for material testing in combination with ZwickRoell testing machines (specifically the AllroundLine). Flexible Application ZwickRoell’s innovative temperature chamber ensures a flexible testing system tailored to customer needs—without compromise. This guarantees reliable test results well into the future. The safety door function ensures operator protection in compliance with European safety regulations. The chamber door serves as a safety door with an interlocking mechanism. Precise Temperature Control The temperature chamber creates extremely uniform and precise conditions for specimens throughout the entire chamber volume. This ensures accurate and repeatable test results. Key Specifications Temperature range: -40°C to +160°C. Cooling system: Liquid nitrogen (LN2) for rapid cooling rates. Temperature Chamber for AllroundLine Application: Specifically designed for integration into materials testing machines to perform mechanical tests (e.g., tensile or compression tests) under controlled environmental conditions. All panels in the door area (interior and exterior) are made of stainless steel. Dismountable heavy-duty base frame Dimensions: W x D x H = 1400 x 600 x 800 mm Chamber: Ndjdszcpwpjpfx Aa Rsa W x D x H = 440 x 530 x 650 mm Test opening: 110 mm Power supply: 400/230 V, 16 A, 3N~, 50/60 Hz Cooling via LN2 (liquid nitrogen) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!