Used Sac Table Mill for sale (23,971)

Condition: excellent (used), functionality: fully functional, Horizontal table drilling machine with supports and 3-axis digital display Manufacturer: Collet & Engelhard Type: BFb 85 n Travel X: 2400 mm Y: 1000 mm Z: 750 mm Usable clamping area: 900 x 1400 mm Spindle diameter: 100 mm Tool holder: ISA 50 Spindle speeds: 6 - 1250 rpm Drive power: 7.5 kW Power supply: 380 V, 50 Hz, three-phase Knsdszpfy Espfx Akioc

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, CNC T TYPE BORING MACHINE CASTEL RED X TRAVEL 4000MM Y TRAVEL 2000MM Z TRAVEL 700MM(SPINDLE) Ksdpfjx U Dfyex Akionc W TRAVEL 2500MM(COLUMN) ROTERY TABLE 1800X 1600MM (HYDROSTATIC) TABLE INDEXING 0.001° TABLE LOADIONG CAPACITY 12TON CNC SELCA1200

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Kjdpfx Ajuuh Suokionc Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Height: 25 cm

Condition: used, Year of construction: 1978, x-travel 1000 mm y-travel 900 mm z-axis 800 mm W-axis (spindle longitudinal) 500 mm spindle diameter 90 mm table surface area 1.000 x 1.000 mm table load 2,5 t Knjdpfx Aezmir Tekiec spindle turning speed range 8- 1600 U/min power capacity - milling spindle 11 kW tool taper SK 40 | control Heidenhain TNC 407 dimensions 4,5 x 3,25 x 3,0 m weight of the machine ca. 8 t used table borer. retrofitted to CNC Heidenhain TNC 407 - some tool holders - turntable with motor - coolant system

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault Knsdpfx Akotv H Ucjijc in the electrical system.

Condition: used, Year of construction: 1984, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 340 mm, cutting width (max.): 450 mm, control type: manual, roller diameter: 500 mm, pivoting range: 45 °, actuation type: electric, total height: 1,950 mm, total width: 700 mm, year of last overhaul: 2026, Equipment: CE marking, For sale is a SAC BW 500 bandsaw manufactured in 1984. The machine is located at my premises, is fully functional, and can, of course, be inspected and tested before purchase. A recent DGUV-V3 inspection has been successfully completed. The machine has been inspected and is ready for operation. The bandsaw is secured to a pallet, making it easy to transport and allowing it to be conveniently loaded onto our forklift for pickup. Technical data: - Manufacturer: SAC - Model: BW 500 - Year of manufacture: 1984 - Motor power: 2 kW Knsdpfxsz S H Stj Akioc - Speed: 2,800 rpm - Electrical connection: 380 V / 50 Hz - Current consumption: 3/7 A - Saw blade width: 16 mm - Throat depth: 340 mm - Cutting width to the left of the fence: up to 440 mm - Cast iron wheels: 500 mm diameter - Wheel rubber coating: still in good condition Saw table and fence: - Solid cast iron table, swiveling by 45° - Table width: 700 mm - Table depth: 550 mm - Aluminum fence ruler: - Length: 670 mm - Height: 140 mm Machine dimensions: - Height: 1,950 mm - Width: 880 mm - Depth: 700 mm Condition and pickup: - Fully functional - Recent DGUV-V3 inspection - Can be inspected and tested on site while powered - Secured to a pallet - Loading with a forklift is possible The 500 mm cast iron wheels still have a good rubber coating on which the saw blade runs. The SAC BW 500 is a solid, classic bandsaw for woodworking and is suitable for workshops, carpentry shops, or ambitious woodworking projects. Inspection and functional testing are possible by appointment. Pickup on site. The machine can be loaded onto a suitable transport vehicle using a forklift. If you have any questions, please do not hesitate to contact me.

Condition: used, Year of construction: 1989, spindle diameter 125 mm x-travel 3000 mm y-travel 1500 mm control Heidenhain TNC 355 taper ISO 50 w-axis 600 mm Table dimensions 1200 x 1500 mm Knsdpfoyqurzsx Akisc table load 5 t spindle turning speed range 12 - 2300 U/min voltage 380 V Automatic tool Changer (40 positions) Chip Conveyor Coolant Attachment Spindle Support The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1971, For sale is a TOS WH 80 drilling machine, manufactured in 1971, in working condition. The machine is equipped with a retrofitted digital display and has an MK5 spindle. Equipment / Condition: * TOS WH 80 * Year of manufacture: 1971 * Functional * Retrofitted digital display * MK5 spindle * Large clamping table with T-slots * A large amount of additional equipment and accessories is available * Maintenance / Repairs: In 2024, the gearbox was opened and overhauled. Various gears were renewed or replaced during this process. The machine can be inspected on-site and, by arrangement, demonstrated. Knedpjzwv Dkefx Akisc Due to its size and weight, the buyer is responsible for organizing the collection or transport. Further photos and information on the available additional equipment are available upon request. VAT can be shown separately.

Condition: used, -Vorschub Holz-Her 3 Rollen Knsdpfx Ajc Sl Ddokiec

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Knodpfx Aksy T E Itsiec Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Knedpfxsy H Dahs Akisc Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: unexamined, Ferwood Code: AGG0213 - Manufacturer Code: 1-056-09-3351 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 8 kg - Dimensions: 46x39x27 cm - If interested, we offer an overhaul service. Please contact us. Knsdsyztt Hspfx Akijc

Condition: used, Technical details: spindle diameter: 130 mm x-travel: 2190 mm y-travel: 1520 mm z-axis: 1520 mm w-axis: 1000 mm table surface area: 2000 x 1800 mm workpiece weight: 8 t spindle motor: 18 kW spindle taper ISO: 50 Knedpfx Asvclrxekiec spindle turning speed range: 4,5 - 900 U/min faceplate diameter: 785 mm rapid traverse: 5 m/min total power requirement: 40 kW dimensions of the machine ca.: 5,5 x 6,9 x 5,2 m weight of the machine ca.: 35 t Machine was retrofitted in 2023 with HEIDENHAIN TNC 360 CNC control - inf. variable spindle spped - 4 x 90° table positioning - diverse toolholders - dDust exhauster *

Condition: excellent (used), Year of construction: 1994, power: 5.5 kW (7.48 HP), SPINDLE MOULDER GRIGGIO T270 WITH 2-POSITION TENONING SLIDING TABLE RIGHT-HAND SIDE EXTENSION ADJUSTABLE FRONT SUPPORT BAR ADJUSTABLE SPEED FEEDING DEVICE WITH 4 ROLLERS 40 MM DIAMETER SPINDLE WITH 270 MM USEFUL LENGTH 190 MM USEFUL DEPTH OF TABLE CUP MAXIMUM SIZES OF THE TOOL ALLOWED UNDER THE WORKING TABLE: 320 X 190 MM HANGING CONTROL PANEL WITH ELECTRONIC HEIGHT PROGRAMMER 8 SPINDLE HEIGHT SETTING POSITIONS LOCKING SPINDLE LEVER WORKING TABLE SIZE: 1850 X 730 MM MAXIMUM OPENING OF FRONT ADJUSTABLE SUPPORT BAR: 330 MM WORKING TABLE HEIGHT: 900 MM SPINDLE USEFUL LENGTH: 270 SPINDLE STROKE: 250 MM SPINDLE DIAMETER: 40 MM SPINDLE ROTATION SPEED: 3000-4500-6000-8000-10000 RPM TABLE RING DIAMETER: 115-170-220-270-350 MM Knsdpfsznnx Ijx Akioc MOTOR POWER: 7.5 HP 2-POSITION TENONING SLIDING TABLE – WORKING TABLE SIZE: 900X300 MM TILTING: -60° +60° STROKE: 1300 MM NET WEIGHT: 900 KG VERY GOOD CONDITION

Condition: good (used), Year of construction: 1991, spindle moulder, spindle moulder, wood milling machine -Manufacturer: SCM, table milling machine type T 110 A with table extension -Drive: 4 kW Knodpfx Aswhbthokijc -Milling spindle: Ø 30 mm -Speeds: 3,000/4,500/6,000/8,000/10,000 rpm -Table extension: with stops on both sides see photos -Dimensions total: 3600/910/H1610 mm / machine 2615/750/H1320 mm -Total weight: 550 kg

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 360 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m weight of the machine ca.: 28 t Knjdpfx Akju Idp Dsisc with face slide 700mm , electronic hand control *

Condition: used, Year of construction: 1988, Spindle swivels: Yes, -5 to 45° Height adjustment: electric Swivel adjustment: electric Stop adjustment: manual Kodezq Dc Ijpfx Akijnc Height indicator: scale Swivel angle indicator: scale Milling stop indicator: scale Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 8000, 10000 Motor power: 6 kW Motor brake: Yes, automatic Dust extraction connection: 2 x 120mm Machine length: 1,200 mm Machine width: 1400 mm Weight: 1100 kg

Condition: used, spindle diameter 130 mm x-travel 2000 mm y-travel 1600 mm z-travel 1000 mm spindle taper ISO 50 turning speeds 4-1120 U/min Feed 5-2000 mm/min bore spindle stroke 850 mm main drive motor 45 kW table surface area 1250x1600 mm Control Heidenhain type TNC 426 workpiece weight 12500 kg 720 radial face slide travel 240 mm total power requirement 90 kW weight of the machine ca. 26,3 t dimensions of the machine ca. 6,5x5x5x4 m The tech. Data are manufacturer or operator information and therefore non- Knodpeyqr U Tofx Akisc binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM TF130ps Undercut Spindle Moulder Ksdjzlw Rnspfx Akienc Spindle diameter: 40mm Longitudinal carriage in the worktable Total spindle length: 180mm Main motor power: 7kW Spindle speed change via belt drive: 3000/4500/6000/7000/10000 rpm Spindle rotation: left and right Manual spindle lifting Technical documentation Year of manufacture: 2019

Condition: good (used), spindle moulder, spindle moulder -Manufacturer: Metabo, swivel table milling machine type Tf 1690 D with support table Kedpfx Aewha Nbokionc -Drive: 2.0 kW -Milling spindle: Ø 30 mm -Speeds: 3,000 / 6,250 / 9,000 rpm -Cutter: Ø max. 200 mm -Table length: 3600 x 500 mm -Dimensions: 3600/910/H1610 mm -Total weight: 170 kg

Condition: good (used), Table size: 1100 x 1300 mm Kjdpfx Ajh T T Aqekionc Travel range: 1300 x 1300 mm Spindle travel: 500 mm

Condition: used, Year of construction: 1997, Spindle diameter: 110 mm Travel: X: 1985 mm Y: 1620 mm Z: 1260 mm W: 710 mm Ksdpfx Akjzy E Svjisnc Table surface: 1400 x 1600 mm Spindle taper: ISO 50 Control system: HEIDENHAIN TNC 426 Maximum table load: 6300 kg Feed rate: 5 m/min Working feed rate: 5 to 2500 mm/min Spindle speed: 6 to 1250 rpm Motor power: 33 kW Total power: 90 kW Table rotation: 360° Weight: 25400 kg

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Knedjxcilrepfx Akisc

Condition: refurbished (used), functionality: fully functional, spindle diameter: 130 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,800 mm, feed length X-axis: 3,500 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 1,250 mm, feed length W-axis: 800 mm, workpiece weight (max.): 12,000 kg, spindle stroke: 800 mm, year of last overhaul: 2025, Equipment: documentation/manual, WHN13-CNC, OVERHAUL 2025 | 3.0996 ■ HORIZONTAL BORING MILL – T-TYPE ■ PRODUCER: TOS VARNSDORF Knedpeztqyfofx Akiec ■ OVERHAUL YEAR: 2025 RETOS ■ CONDITION: AFTER OVERHAUL ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ HEIDENHAIN TNC 640 control system ■ Handwheel HR510 ■ HEIDENHAIN drives and SIEMENS motors ■ Ready for cooling through spindle axis and automatic tool changer ■ Can be equipped with other optional accessories - delivery on request

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3303.85 € 6 mm B 12 220 mm 100 - 10000 U/min 0,54 kW M5 452 mm 700 mm 1130 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 6/8 (in E335/ST60) Drilling capacity / normal drilling performance Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Knedey Hf Rhjpfx Akiec Drill package 2 (vice & keyless chuck)