Used Samed Darix Evolution Light for sale (18,369)

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress Psdpfx Aorualpjbgogr 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Condition: new, mileage: 20 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, * New vehicle including manufacturer's warranty * 3.0 HDI 175PS * EURO6 (Green environmental sticker) * Fog lights * Daytime running lights LED * Headlights LED * Cruise control * Leather multifunction steering wheel * Active seat with KG adjustment * ABS- ASR- AFU * DAB radio MP3 * Bluetooth * Automatic air conditioning * L/W/H 4300x2250x2350 * Electric windows * Electric. Mirror * Central locking with radio * On-board computer with trip calculator * Reinforced design * Long wheelbase * Ultralight case (30% more payload than a conventional case) * Fastening rails for securing loads integrated in the wall * Lockable storage box * Roof transparent for daylight * Special floor (waterproof and anti-slip) * Side marker and outline lights in LED technology * Roof spoiler and underrun protection made of aluminum * BÄR tail lift 750 KG with cable remote control * Additional air suspension for an additional charge * Rear view camera for an additional charge If the vehicle is not in stock - short-term delivery possible! * Ask us for an individual leasing or financing offer * Net export possible * Delivery from 199¤ Not found the right vehicle? Configure your own vehicle! Whether equipment, body or engine variant. Everything at a fair price! You can also buy just the bodies for your existing vehicle from us! Don't hesitate to contact us! * Images may show special equipment that is not included in the basic price. ? Pjdpfx Abjuh Nf Isgegr ----?? The information provided on the Internet is a non-binding description. It does not represent guaranteed properties. The seller is not liable for typing and data transmission errors / changes / input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors / subject to prior sale. This advertisement is to be understood as an invitation to submit an offer.

Condition: used, Area lighting, floodlight, workshop lamp, lamp, hall lamp, hall lighting, pendant lamp, industrial lamp -Power: 150 watts -Number: 13x lights available -Price: per piece -Dimensions: 390/320/H310 mm -Weight: 7.1 kg/piece Pjdsd N Ddpjpfx Abgegr

Condition: new, Year of construction: 2025, Through-feed optimizing saw controlled by numeric control and personal computer with Brushless cutting system for the optimization of the wood and the elimination of the defects. COSTCUTTING OPTIMIZING SAW Supercut 500 is a high-speed optimizer able to meet the highest production capacities with utmost reliability. EXTREMELY ROBUST Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Electronic system composed of a computer connected in real time to a last generation numeric control. Software S4U running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. Macro Excel included. Pedpsfhdvrsfx Abgogr FAST Innovative cutting system, it is so fast as to make the blade almost invisible to the human eye. Fast and full optimization maintaining a notable compactness of the machine. Feeding system with Brushless servo driven 18 Nm motor. Cutting system with Brushless servo driven 28 Nm motor. Power motor blade HP=7,5 (5,5 kW) Eight idle rollers under the belt of the in-feed conveyor. RELIABLE AND SAFE Double steel marking platform. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Internal lighting.

Condition: new, pressure: 20bending length: 900column width: 900daylight: 325stroke lenght (max.): 150messurements (LxWxH): 1760 x 1280 x 2190 mmweight approx.: 1950motor power: 3,8 Pedpfx Aed H Hh Dobgogr

Condition: new, Year of construction: 2026, NEW Snap lock roofing panel roll forming machine SL-1 Snap lock roofing panel roll forming machine SL-1 is designed and manufactured by our company as one of the flagman equipment for metal roofing panels production. Following machine makes standing seam roofing panels with self-closing lock on sides (snap lock). The main advantage of such lock system is the easy way of installation: to connect two panels with each other you just need to cover bottom part with top part and press it with some force, you will hear specific click noise at this very moment. That is why name of system is self-closing lock one. Comparing to standard standing seam roofing panels with mechanical lock which you need to close with special tools or equipment, snap lock panels are much easier to install and don’t require additional expensive devices for work. To fix panels at the roof frame you can use standard self-tapping screws, to make it possible, while rolling machine makes special fixation holes on one side of roofing panels. Such simple product design also helps to save costs and make installation process easier, not spending money on clips purchasing, comparing to the standard standing seam metal roofing with mechanical lock installation. So standing seam roofing with snap lock is easier to install, does not require high skilled employees and cut expenses for additional machines purchases. Total high of panels - 31mm As per order, we can also make machine for 26mm panels high. Machine has 10 pairs of forming rolls. One of the rolls has special punching parts so can cut fixation holes at roofing panel for further installation operations. Cutting tools are made from tools steel with heating and polishing, so have longtime working period. Maximum metal width can be 700mm, minimum 250mm. Snap lock roofing panel roll forming machine SL-1 is width easy adjustable one, so to adjust machine from one panel width to another you just need to rotate special handle. Rolling length – unlimited Pgedpfeiuz T Iex Abgsr Rolling speed (m/min.): about 7 As extra options, you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; As per customer preferences snap lock roll forming machine can be equipped with automatization system and electric shears for panels cutting. Standard supply set of self-closing lock roll former machine SL-1 includes safety covers to protect working parts of machine from foreign objects. Snap lock machine can work with various types of metal: galvanized steel, copper, aluminum, color coated metal, etc.

Year of construction: 2023, condition: new, We offer brand new roll former automatic line for corrugated metal sheet production. Depends on customer preferences we can produce line for 10, 20, 35, 44 or 57mm profile high. Pgsdpfxokhaads Abgor Some of lines we have ready on stock. Line is equipped with electric uncoiler up to 10t coils, roll forming part, cutting shear, sheet stacker for 10m length. Also we produce customized roll forming lines, metal tile lines, cut-to-length lines, slitting lines etc. To get more information about our machinery please contact our sales department

Condition: new, Year of construction: 2025, total width: 1,000 mm, total length: 1,600 mm, total height: 950 mm, power: 1.5 kW (2.04 HP), Roof panel roll forming machine F3-27 with clip relief LLC “Evolutioner” designed roof panel roll forming machine F3-27 with clip relief for metal roof production of double standing seam profile. Standing seam roof is widely used in the manufacturing of various buildings and structures, in the reconstruction of ancient houses and architectural objects. Standing seam gives a beautiful appearance to the roof, pointing its uniqueness and aesthetic design. In modern construction, standing seam panels often decorate the facades of walls of various buildings. The roofing machine F3-27 allows you to roll metal roof panels of various lengths, the rolling length is unlimited. The machine is quite lightweight, which makes it possible to use it directly at the roof installation place and forming panels directly on site. Thus, there is no need to transport finished roof panels from the workshop to the roof installation place, avoiding their possible damage and saving money on transportation services. Technical details: Rolling length – unlimited; Forming steps: 7; Lock high (mm): 27 Metal roof panel machine F3-27 is equipped with width easy adjustable system, so to adjust the width of the panel you just need to turn the special wheel. As extra options with F3-27 roll forming machine you can get: - cross cutting knife; - length measuring device; Pgsdpfxep Stgne Abgsr - ribbed panel rolls; - radius panel rolls; - standing seam hand seamers; - electric seaming machine ESM-1; - sliding clip formers; - fixed clip formers; - floor decoiler; - ribbed panel forming machine RPFM; - automatic shear with automatic system; Portable roof panel machine F3-27 has six pairs of forming rolls to make a profile height of 27 mm and an additional stand for rolling clip relief. A relief clip is a special bend on the panel to hide sliding or fixed clips under it. Those clips are used to connect roof panel to the roof frame. In addition, we produce following metal roof panel machines: standing seam metal roof machine F3; roof panel machine F3-9 with clip relief; snap lock roof panel roll forming machine SL-1; automatic snap lock roof panel machine SL-1 auto;

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,800 mm, loading space width: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ---- New German vehicle: ABS, ESP * Central locking with FFB * Wide mirrors * Radio with Bluetooth * Cable winch * Trailer coupling * Payload approx. 1,300 kg. Full aluminum platform: * "Sport" body variant, platform arranged at an angle to the driver's cab * Body 4800 x 2100 mm. incl. middle floor + loading ramps * Trailer coupling + connection socket * Side aluminum profile painted in the same color as the chassis * Aluminum frame made from C-profile * Loading floor made from aluminum profiles * Aluminum loading ramps * Trailer coupling 2,500 kg. Trailer load * Storage box for tensioning straps * Light bar carrier painted in the same color as the chassis * Light bar * Optional: LED work lighting integrated into the side of the loading floor * Optional: Trailer type Modello, 550x205, 3500kg, price on request Load securing is also available from us: * Tensioning and lashing straps * Locking bars * High visibility vests * Transport boxes * Edge protection * Storage bags * Wheel stoppers * etc. Financing and leasing possible We manufacture bodies of any size on any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Pedpfstw Nudjx Abgegr Bodies - Complete vehicles - Trailers - Advice - Financing Subject to errors and prior sale, no liability for printing and input errors.

Condition: used, axle configuration: 3 axles, first registration: 10/2018, suspension: air, tire size: 445/45 R19,5, color: silver, mileage: 477,069 km, gearing type: mechanical, Equipment: ABS, EU vehicle, tire size: 445/45 R19.5, 1st axle: , 2nd axle: , 3rd axle: , air suspension, axle load indicator, lifting roof, bumpers Psdpfxsv Nrdno Abgegr

Condition: as good as new (ex-display), different Schölly Flexilux fiber light guides - Ringlight - Gooseneck - single arm Prices from € 100,-- single) to € 350,-- (ring) Pgedefr T Ihspfx Abgjr prices are EXW, bulk discount possible

Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Price is for each machine, NOT for the package. Package is 15% discount. Podpstyy Sfjfx Abgegr Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: good (used), Year of construction: 1994, operating hours: 7,430 h, functionality: fully functional, overall weight: 38,000 kg, fuel type: hybrid, power: 1,500 kW (2,039.43 HP), output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Wärtsilä, Diesel Generating Set – 1.5 MWe / 50 Hz Wartsila Vasa 4R32 LN-E This Wartsila diesel generating set has been used exclusively for testing purposes by VTT Technical Research Centre of Finland and has accumulated only 7,430 operating hours since new. Originally, it was built as a conventional diesel engine capable of burning various heavy fuels with viscosities of up to 730 cSt at 50°C. The engine was subsequently upgraded by Wartsila to comply with the LN-E model specification for their 32-series engines and it was equipped with adequate fuel feeding systems, cylinder heads, pistons and liners for dual fuel (DF) and gas diesel (GD) operation. The upgrade included the installation of anti-polishing rings, an increase in engine output, and the implementation of a completely new control system. The unit has been used to test various fuels and components on behalf of Wartsila. It has been exclusively serviced by Wartsila and remains in good technical condition. Over the years, Wartsila has installed new components and control systems. At present, the engine is equipped to operate in three different modes: As a conventional diesel engine using heavy fuel oil (HFO); As a Wartsila 32DF (Dual Fuel) engine using natural gas and light diesel oil; As a Wartsila GD (Gas Diesel) engine, where gas is compressed to high pressure and injected into the cylinder, ignited by a pilot dose of light diesel oil. Naturally, to switch between modes, certain components—such as the turbocharger, cylinder liners, pistons, and cylinder heads—must be changed. All necessary components and much more additional spare parts (some brand new) are coming together in the same package. We can specify more in details upon request. Pedpfx Abeyfflzegsgr Technical support for on-site installation can also be provided, subject to a separate agreement. The machine is currently located in Kotka and can be shipped by sea to any suitable destination port. Quotations are available upon request.

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 Pedpfxsxmthrs Abgjgr TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: used, mileage: 378,317 km, power: 335 kW (455.47 HP), first registration: 11/2020, fuel type: diesel, maximum load weight: 10,619 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: retarder, color: other, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, Year of construction: 2020, Equipment: air conditioning, cruise control, hydraulics, navigation system, onboard computer, parking heater, This offer is non-binding. Errors and prior sale excepted. If a foreign currency is stated, it refers to the current daily exchange rate. The currency valid is that of the vehicle's location. Engine: OM470, R6, 10.7 L, 335 kW (455 HP), 2200 Nm, High Performance Engine Brake, transmission oil cooling, axle load measurement system, alloy wheels, secondary water retarder, wheelbase 3700 mm, aluminum tank 570 L, AdBlue tank 60 L, L cab, L cab, cab width 2.50 m, BigSpace, air deflector, lockable with end flap spoilers, external sun visor (transparent), MirrorCam, upper comfort bed (wide, adjustable), lower comfort bed, LED ambient lighting (living and driving area), refrigerator in drawer under bed, electric stationary air conditioning, automatic climate control, auxiliary hot water heater, driver suspension seat (comfort), lane keeping assist, distance assist, Active Drive Assist, attention assist, traffic sign assist, blind spot assist, driver's airbag, cruise control, navigation system. Psdpfx Absx Rv D Tjgjgr

Year of construction: 2023, condition: new, Due to overproduction, 9 units are available. Dimensions: approx. 3000 x 300 x 105 mm Aluminum construction: Conveyor belt width without wave edge Smooth PVC conveyor belt Green conveyor belt, 2-layer, particularly resistant to transverse forces, endlessly welded with a stepped joint * antistatic due to threads in the fabric of the running side Pjdpfxjff Hgao Abgogr Drive: motor approx. 0.18 kW, speed 0.3 m/sec. * speed controllable with a frequency inverter Connection 220/400V, 50Hz, protection class IP54 Drive and motor control optionally available.

Condition: used, Year of construction: 2022, ---- Data: Frame: Stationary Light type: LED Dimensions (L x W x H): 500 mm x 500 mm x 2200 mm Weight: 45 kg Mast type: Manual, vertical Maximum height: 3.5 m Pgodpezkzc Ssfx Abgjr Power: 1 x 320 W Wind resistance: 50 km/h Mains frequency: 50 Hz

Condition: used, mileage: 48,000 km, power: 75 kW (101.97 HP), first registration: 06/2000, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 11/2026, color: beige, gearing type: mechanical, emission class: euro2, number of seats: 6, total length: 5,413 mm, total width: 1,880 mm, total height: 2,090 mm, Year of construction: 2000, Equipment: ABS, all wheel drive, parking heater, 1st owner. Only 48,000 total kilometers driven, with service records. Directly from the heated garage of a German aid organization. Long wheelbase syncro 4x4 with limited-slip differential. 3320 mm wheelbase. Registered as a 9-seater, but actually has 6 seats. Original registration according to the vehicle registration document as a "closed passenger car 96/69/EC III". Last registered as "other motor vehicle, water rescue 96/69/EC I". Ball-type tow hitch with a 2000 kg braked towing capacity or 700 kg unbraked. Maximum permissible total weight = 4500 kg. Unladen weight according to documents: 1854 kg. Permissible total weight: 2800 kg. Overall vehicle dimensions: 5413 mm long / 1880 mm wide / 2090 mm high with a blue rotating beacon (without a special warning signal, it is 1920 mm). 5-cylinder TDI diesel engine with 2461 ccm and 102 hp, running perfectly. 5-speed manual transmission. 155 km/h. ABS. Power steering. Auxiliary heater. 2nd battery and external power supply. Good winter tires from DOT 2023 (with "snowflake symbol"). Swiveling spare wheel carrier / original VW syncro. Fog lights. Additional rear upper turn signals. Production date of this VW bus at the Hanover plant: 02/17/2000. In spring 2026, the T4 was driven over 700 kilometers on the highway without any problems. It runs smoothly and cleanly at all speeds. No problems whatsoever. The van is ready to drive with a valid MOT until 11/2026. Psdpfx Ajyu Egwebgegr There are signs of wear. The overall condition of this long wheelbase syncro TDI is good. This offer is only valid for commercial enterprises of any kind as well as authorities/emergency services. Sale to private end consumers is unfortunately generally excluded. Subject to prior sale and errors. The purchase price is quoted gross = net. So-called differential taxation according to §25a UStG (German VAT Act). This means that no additional 19% VAT has to be paid on top of this price. At the same time, however, the VAT cannot be separately calculated from the purchase price and therefore cannot be deducted for those entitled to claim input tax deduction.

Condition: new, Mini Cable Recycling Line with a capacity of 50-80kg/h The set includes: 11kW grinding mill - TORNADO 320 Compact dust removal system Belt conveyor Pgjdpfx Ajv I Skrebgjr Water separator - GOLD RIVER 300/1250 Technical data of the installation: Installed power - 13kW Power supply - 400V; 50Hz Batch efficiency - 50kg/h (this is a real value, checked on basic materials). Dimensions - 3500x3600x1950mm Weight - 950kg Spare consumables included. This is a set of high-quality devices created for cable recycling. The basis of the entire recycling process is proper fragmentation and separation, TORNADO series grinding mills have been designed so that the input material leaves the chamber in a short time, the enlarged sieve area and balanced rotation of the cutting rotor provide us with uniformly cut material fractions. The use of an innovative water system with pressure control valves in GOLD RIVER series separators allows for very precise separation of materials that are difficult to separate. The introduction of a new separation mat solution in combination with several other technical parameters allows for the separation of a single copper wire with a thickness of 15 microns [µm]. At the same time, maintaining the ideal purity of the plastic. Solid Polish workmanship supported by experience ensures a very long service life. The materials used for production are carefully selected in terms of type and meeting the appropriate strength parameters. We provide full post-warranty service throughout the country, we have every part for the offered devices. Recyclable materials: Aluminum cables of all kinds Car harnesses with adhesive insulation Computer tapes Network and telephone cables Coaxial cables, Christmas tree lights Copper wires filled with silicone or gels 15-micron winding coils, contaminated with plastic and sticky paper Winding coils filled with silicone coating IMPORTANT!! We provide real performance!

Condition: used, Year of construction: 2025, operating hours: 80 h, Demonstration machine prototype, available immediately: Pgedpjxpwxyefx Abgjr RENNER RSF REvolution 90 D - (5 to 13 bar) frequency-controlled, direct-drive screw compressor with RENNERtronic Plus Touch control with adjustable pressure range from 5 to 13 bar Operating hours: approx. 80 hours Year of manufacture: 2025 Pressure: 6 to 13 bar Rated power: 250 kW Delivery volume: at 5 bar: 6.52 to 17.17 m³/min at 6 bar: 6.50 to 17.11 m³/min at 7 bar: 6.47 to 17.02 m³/min at 8 bar: 6.44 to 15.88 m³/min at 9 bar: 6.39 to 15.10 m³/min at 10 bar: 6.32 to 14.25 m³/min at 13 bar: 6.05 to 11.61 m³/min Noise level: 74 dB(A) Dimensions length x width x height: 1997 x 1493 x 1801 mm Weight: 2850 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.able.

Condition: new, Year of construction: 2026, Automatic Slitting & Cut To Length Line Coil Slitting and Cut To Length Production Line for Sheet Metal Processing The Automatic Slitting & Cut To Length Line is designed for longitudinal slitting and cross cutting of sheet metal coils into strips and flat sheets with programmable lengths. The production line combines several operations in one compact system: Coil feeding Slitting Precision leveling Servo length measuring Cut-to-length part Finished sheet conveying Automatic stacking The machine is suitable for processing galvanized steel, pre-painted steel and other coated sheet materials used in HVAC production, roofing, facade systems, roll forming and general sheet metal fabrication. Main Features Combined slitting and cut-to-length production Fully automatic operation Hydraulic cutting system Precision sheet leveling Servo-controlled length measurement PLC controlled production Touchscreen operator interface High production accuracy Compact machine layout Reliable industrial construction Material Processing Suitable materials include: Galvanized steel (GI) Pre-painted galvanized steel (PPGI) Coated sheet steel The slitting section is equipped with hardened tooling designed for accurate strip production. The slitting system provides accurate strip widths with stable cutting quality during continuous production. The production line is equipped with an automatic hydraulic cut-to-length system. Typical cutting tolerance: ±2.5 mm for sheet lengths up to 5000 mm ±3.0 mm for sheet lengths between 5000 and 10000 mm Drive System The roll forming and feeding system is powered by: Main motor: 4 kW Hydraulic power unit: 3 kW Power transmission: Chain drive Industrial gearbox Heavy-duty mechanical transmission Control System Technical Specifications Parameter Specification Machine Type Automatic Slitting & Cut To Length Line Material GI / PPGI Maximum Coil Width 1000-1250 mm Material Thickness 0.25–0.1 mm Minimum Slitting Width 60 mm Heavy-duty 120 mm shaft diameter Maximum Number of Slitting Knives 5 Production Speed 10–15 m/min Main Motor 4 kW Hydraulic Power 3 kW Cutting Accuracy ±2.5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Cutting Type Hydraulic Cut To Length Transmission Chain Drive Machine Structure Wall Plate Frame + Column Cutting Structure Machine Dimensions Approx. 2500 × 1500 × 1400 mm Electrical Supply 380 V / 50 Hz / 3 Phase The production line is suitable for manufacturing: HVAC duct blanks Ventilation components Roofing sheets Wall cladding panels Roll forming blanks Sheet metal parts Laser cutting blanks Press blanks Electrical cabinet panels Industrial sheet products Advantages Slitting and cut-to-length in one production line Compact machine footprint High processing accuracy Low maintenance requirements Fast production changeover Automatic sheet stacking High productivity Reliable hydraulic cutting Precision leveling Suitable for continuous industrial production Standard Equipment Depending on customer requirements, the production line can be supplied with: Podpfx Abszrwhmjgjgr Manual decoiler Hydraulic decoiler Double decoiler Coil loading car Protective film laminating unit Different slitting knife configurations Increased material thickness capacity Different coil widths 1.5 m conveyor table 3.0 m automatic stacking system

Condition: used, Year of construction: 2020, operating hours: 1,326 h, fuel type: hybrid, Drivetrain Make of engine: Kubota Weights Empty weight: 2.850 kg Psdpfxszrrx Te Abgogr Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.000 cm Other information Emission level: Stage V / Tier V Delivery terms: EXW Max. horizontal reach: 1000 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Production country: IT Additional information Please contact Martyn Joosse for more information

Condition: used, This listing is for 1 of 2 Roche LightCycler 1.5 Thermal Cycler Pjdexzgunepfx Abgegr

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: E22SI16112554450, This is a combination steamer SCC WE 202, in electric version, from the premium manufacturer Rational, manufactured in 2016. The combination steamer is located in our in-house workshop and will undergo a thorough inspection, and will be sold with a 6-month warranty. These are sample photos of the same model series; actual photos will follow shortly. The combination steamer is expected to be available from week 30. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician throughout Germany. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 standard This combination steamer offers space for 20 x 2/1 or 40 x 1/1 GN containers. In automatic mode, the appliance automatically recognizes the ideal cooking path, the size of the food, the quantity being loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods and finishing). Technical data: W x D x H: approx. 1084 x 996 x 1782 mm Minimum dimensions of the door opening for transport W x H: 1145x1900mm Power connection: V: 400 / kW: 65.5 / Hz: 50/60 Weight: approx. 351 kg Serial number: E22SI16112554450 Year of manufacture: 11/2016 Condition: Used, inspected and fully functional. Further information: In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C) Core temperature sensor Integrated energy optimization Care Control - self-cleaning Handheld spray with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time preselection 7 cleaning levels for unattended cleaning - also overnight Moistening adjustable in 3 levels - from 30°C to 260°C 5 programmable fermentation levels Pedpfszkhwijx Abgegr USB interface Joint-free, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available Pgedpfxjztwx Us Abgor The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures